December 4, 2020 NHTSA CAMPAIGN NUMBER: 20V752000
A locked up or non-functional LCD display can delay emergency efforts, increasing the risk of injury.
NHTSA Campaign Number: 20V752
Manufacturer E-One Incorporated
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 195
E-One Incorporated (E-One) is recalling certain 2020-2021 Commercial, 2019-2020 Cyclone 2 and 2020 Cyclone N, Quest 2, Typhoon and Typhoon N vehicles, equipped with Weldon V-Mux Vista IV Standard LCD displays used for controlling emergency vehicle lighting and HVAC functions. These displays may experience low voltage spikes, causing the LCD display to lock up or become nonfunctional.
E-One will notify owners, and dealers will replace the display or apply a retrofit remedy, free of charge. The recall is expected to begin January 8, 2021. Owners may contact E-One customer service at 1-352-237-1122.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
8 Affected Products
2 Associated Documents
Defect Notice 573 Report
Latest Recalls Documents
For the most up to date documents from NHTSA for this Recall, click the lick above
- High precision Current detection; accurate Battery SOC%
- High and low voltage programmable alarm - backlight and voltage value will flash Simultaneously
- Data storage - designed to automatically store the last testing data when system shuts off
- Large backlit LCD displays multiple electronic parameters (voltage, current, consumed power and battery capacity)
- Universal Battery Monitor- voltage range 10v-120v and up to 500A
- Universal battery Voltage Meter - wide voltage input range DC 12V-48V Lead-acid Batteries and 2S-15S Lithium Batteries: Ternary lithium batteries, polymer batteries, lithium-ion batteries, storage batteries.
- Universal Power Button - This battery Voltage Meter has universal power button, which can be used to set the battery model and string numbers of batteries.
- High Quality Battery Voltage Meter - Large LCD screen display with green backlit and low power consumption.Two display modes can be available: battery symbol and battery percentage, battery symbol and voltmeter.and the liquid crystal electric quantity is 70% lower than that of the conventional digital tube.
- Safety to Use - Battery Voltage Meter with Built-in 30cm power cable, simple to connect. Reverse protection design, won't burn if connect reversely.With mounting screws, no additional parts are required to save costs.
- Portable& Wide application Battery Voltage Meter - Small size, light weight, equipped with a PVC film.The battery capacity indicator meter can be used in various instruments and meters¡portable device¡mobile power¡medical equipment¡electrombile etc.
- APPLICABLE BATTERY --- DROK digital battery monitor is suitable for 10-100V (12v 24v 36v 48v 60v 72v 96v) lithium battery, lead-acid battery, lithium iron phosphate battery, Ni MH battery. Default 12 volt lead acid battery.
- APPLICATION --- this multimeter can be used as battery voltage meter, battery capacity tester and temperature indicator panel for car, marine, RV, boat, etc.
- PROTECTION --- the battery power detector comes with protective shell, dustproof waterproof surface; input reverse connection protection.
- LCD DISPLAY --- the battery status reader adopts clear LCD color screen, displays battery capacity, voltage, temperature value(switched by the key).
- ALARM --- if low voltage, red indicator flashes and buzzer alarms.
- 【CAR BATTERY MONITOR】ANCEL BM300 bluetooth battery monitor is designed for all 12V batteries. It can do voltage test, charging test, cranking test and trip recording on your vehicles. And the car battery tester only use very little power from the battery. Simply have a check before you go out without hassles on the road.
- 【12V DIGITAL BATTERY TESTER】With Bluetooth 4.0, the free app ANCEL Battery Charge Monitor 12V RV can connect with the battery in milliseconds. Moreover, the real-time notification will notify you when the battery is dropping with the accurate voltage readings, which you can check it on your phone conveniently.
- 【VERSATILE BATTERY ANALYZER】 The battery load monitor BM300 is compatible with all 12V batteries, including regular flooded, AGM flat plate, AGM spiral, and GEL batteries for vehicles, forklifts, hybird cars, SUVs, Pickups, Boats, RVs, Motorcycles, travel Trailers, and even Solar Power Systems.
- 【COMPACT & CONVENIENT】The 3.2 ounces upgraded version of Bluetooth voltmeter BM300 is very compact, which won’t take you much space. And you don’t have to press any annoying buttons to check the data. You just need to fix it to your battery, go back to your seat and check your phone.Please note that you should be within the range (33 feet).
- 【SECURE CAR BATTERY TESTER】The reverse-polarity protection design and fireproof material can keep you safe and sound. The device will automatically monitor the vehicle's battery, cranking and charging systems, which can store up to 31 days of data. Now get one and monitor the battery health yourself! At the same time, it is also the perfect Valentine's Day Gift for your family and friends.
- 3 in 1 battery voltage meter - With a switched function button to choose the battery capacity, real-time voltage or turn off; New alarm function, when the battery capacity is lower 20%, the screen display will flash to alarm.(Note: package only include 1 battery meter!)
- Universial battery status monitor - wide working voltage input range DC 12V-84V.Can be automatically detect to the accurate voltage according to the battery voltage.
- Suitable for various battery types - fits to 12V/24V/36V/48V/60V/72V/84V lead acid battery, Ternary Lithium battery, Polymer lithium-ion battery, 3-15 series Lithium ion battery, Storage battery, Water battery, etc. (Note: it cannot be used for Lithium Iron Phosphate batteries, 1-2 Li batteries in series and over 15 Li batteries in series.)
- Sensitive LCD digital display - the small battery voltage reader with a PVC waterproof screen poterctor, clear and bright green backlight LCD display from any angle; Low working power consumption(5mA max), in additional there's a turn off button for it.
- Multifunctional application - suitable for (Yamaha) golf cart, RV, marine, boat, (EZGO) club car, motorcycle, car, bike, ebike, scooter, truck, vehicle, jet ski, forklift
- MNJ Round Double Voltmeter, real time monitoring 2 battery packs of vehicles, remind you of charge or replacement in time, better avoid emergent dead battery at starting car engine!
- Embedded in 3-bit Blue LED digital display, Clearly shows you the current precise readings of working volts, better helps you to early notice your car voltage condition
- Made of Eco-friendly & flame retardant durable ABS plastic and good conductivity pins with black matte surface treatment, wear and tear resistant for long lasting durability
- Panel Flush Mount and Easy to Install, drill size of 1.15" diameter, with Twist & Lock fastener for stable mounting, Fits to almost all panel locations you desired!
- Super large input of up to DC 60V with Over-current, Over-volt and Short Circuit Protection, well protects the whole circuit, fits for most 12-24V Car Motorcycle ATV UTV RV Vehicles and Marine Boat
- 1.9 in 1 Measuring Type/Range:Voltage 0-200V,Current 0-100A,Power 0-20000W,Impedance 0-1000Ω,Internal Resistance 0-999mΩ,Capacity 0-1000AH,Dump energy 0～9999kWh,Running time 0-999 hour.
- 2.LCD Display:Large-screen LCD with a full sight of 180° view,The blue backlight can be turned on/off manually.
- 3.Two modes: normal display mode and dormant mode.
- 4.No screws design: Press down terminal buttons, insert bare thread and release.
- 5.Wildly application:DC multifunction battery meter wildly applied to solar system/industrial assembly line/Automobile/RV etc.
- PARAMETER: Waterproof, mini size with 3-digit LED Digital Display. NOTE: High accuracy percent: ± 0.2%. It can meet your measuring need.
- VOLTAGE: The measuring range: DC 8V-16V, which is suitable for various power supply. Please note that this voltmeter cannot be connected to AC 220V.
- WIRING: With reverse connection protection, red and black wire, red is for positive of the power supply while the black is for the negative side, easy and effortless.
- APPLICATION: Suitable for cars, motorcycles, bikes, substation automation, distribution automation, test equipment, voltage regulator, and so on.
- CHARACTERISTIC: Displays "LLL" when the voltage is lower than measuring range; displays "HHH" when the voltage is higher than the measuring range.
- The Voltmeter needs isolated power supply power supply range is DC 3 5-30v
- High precision : the measurement range of 0-33 000V
- With reverse polarity protection to avoid burning out
- Wiring: red: power supply+ (DC 5-30v); black: power supply -, measure - ; Yellow: measure +
- Any queries should you have please feel free to contact US！
- 🔋 【Battery Capacity/Voltage Dual Paremater Display】Icstation battery voltage capacity tester can not only test the battery capacity percentage, but also the voltage value. This battery monitor can tolerate widest working voltage range DC 8-63V.
- 🔋【Support 3 Types of Battery】Digital battery status indicator is suitable for 12V/24V/36V/48V lead acid battery, 1~16 series lithium battery, and 1~19 series lithium ion battery (8V-63V), meet your various application.(Please note: Single lithium battery should be 3.2V, and single iron-lithium battery should be 3.7V.It can not support AA, AAA battery.)
- 🔋 【Press button to switch the display of voltage/capacity 】This battery capacity monitor can test the battery voltage and capacity. But it can not show the value at the same time. one button control the backlight and switch the capacity or voltage display. You should press the button to switch the capacity/voltage to monitor.
- 🔋【 User Tips】1.Please DO NOT connect the battery before pressing the button back of the monitor. Press and keep holding on the button. Then connect your battery. Third, release the button and then enter the setting interface. finally, set the correct code based on your battery type by button.2.The set battery specification should match the applied battery, otherwise, the meter will display 0 or 100%.3. It doesn't come with rear cover
- 🔋【Wide Application】 Voltage and capacity percent meter can be applied to mobile and portable equipment (in addition to smartphones and PCs), such as cleaning machine, instrument and so on.
Last update on 2021-12-03 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2021-12-03 / Affiliate links / Images from Amazon Product Advertising API