“This site contains affiliate links for which OEMDTC may be compensated” |
August 16, 2019 NHTSA CAMPAIGN NUMBER: 19V606000
Loose Compression Fittings on Brake Treadle Valves
A separated hose may cause reduced braking ability, increasing the risk of a crash.
NHTSA Campaign Number: 19V606
Manufacturer PACCAR Incorporated
Components SERVICE BRAKES, AIR
Potential Number of Units Affected 139
Summary
PACCAR Incorporated (PACCAR) is recalling certain 2020 Kenworth T270 and T370 vehicles. The brake treadle valves may have loose compression fittings, which can cause the air supply hose to separate from the valve.
Remedy
PACCAR will notify owners, and dealers will inspect the brake treadle valve hose connections for loose compression fittings, tightening them as necessary, free of charge. The recall began September 30, 2019. Owners may contact Kenworth customer service at 1-425-828-5888. PACCAR’s number for this recall is 19KWD.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Federal Recall Information
<DRAFT>
No. Recall 19KWD
T270/T370 Treadle Valve Loose Compression Fittings
Author:
8/19/2019
Title | Recall 19KWD |
Search Words | |
Bulletin No. | 19KWD |
What’s New Abstract | Safety Recall – Remedy Available. Certain compression fittings on the brake treadle valve may not have received appropriate torque. As a result, a brake application air supply hose may separate from the brake treadle valve, which may diminish vehicle braking capability andmay increase the risk of a crash and injury without warning.. |
Supplier | Dynacraft |
Description | Recall 19KWD: T270/T370 Treadle Valve Loose Compression Fittings |
Release Date | |
Introduction | Kenworth Truck Company has determined that a defect, which relates to motor vehicle safety, exists in certain T270 and T370 chassis manufactured between July 19, 2019 and August 1, 2019. |
Situation | 144 chassis (139 U.S. and 5 Canada) T270 and T370 built from 07/19/2019 through 08/01/2019 equipped with air brakes. |
Resolution | Service all chassis affected that enter your dealership, even if the customer has no issue with the chassis.
|
It is a violation of Federal law for a dealer to sell or lease new vehicles covered by this recall until the defect or noncompliance has been corrected. |
Warranty | There is no time or mileage limit for this recall. Kenworth will pay for labor:
Take-Off Parts Disposition: N/A
|
||||||||||||||||||||
Parts | Parts are available from PACCAR Parts, but chassis repairs are unlikely to require any parts.
Maximum billable material allowance:
|
||||||||||||||||||||
Labor |
Procedure |
|
||
Shipping | |||
Freight | |||
Contact | |||
Attachments | Dealer\Chassis List |
Federal Recall Information
No. 1BRecall19KWD:
T270/T370 Treadle Valve Loose Compression Fittings
Author:
8/19/2019
Title | Recall19KWD: |
Search Words | |
Bulletin No. | 19KWD |
What’s New Abstract | Safety Recall — Interim Notification – Certain compression fittings on the brake treadle valve may have not received appropriate torque. A brake application air supply hose may separate from the brake treadle valve, diminishing vehicle braking capability, increasing the risk of a crash and injury. |
Supplier | Dynacraft |
Description | Recall 1BRecall19KWD: 19KWD T270/T370 Treadle Valve Loose Compression Fittings |
Release Date | |
Introduction | Kenworth Truck Company has determined that a defect, which relates to motor vehicle safety, exists in certain T270 and T370 chassis manufactured between July 19, 2019 and August 1, 2019. |
Situation | 123 chassis (118 U.S. and 5 Canada) T270 and T370 built from 07/19/2019 through 08/01/2019 equipped with air brakes.
This bulletin will be updated after a repair path is available. |
Resolution | |
It is a violation of Federal law for a dealer to sell or lease new vehicles covered by this recall until the defect or noncompliance has been corrected. | |
Attachments | Dealer\Chassis List |
September 30, 2019
IMPORTANT SAFETY RECALL
Subject: | Safety Recall 19KWD – T270/T370 Treadle Valve Loose Compression Fittings NHTSA Recall number 19-V06 EXPIRATIONDATE: NONE This notice applies to your vehcile; VIN: |
Dear Kenworth Customer,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Kenworth Truck Company has decided that a defect, which relates to motor vehicle safety, exists in certain T270 and T370 chassis manufactured between July 19, 2019 and August 1, 2019. Certain compression fittings on the brake treadle valve may not have received appropriate torque. As a result, a brake applicaiton air supply hose may separate from the brake treadle valve, which may diminish vehicle braking capability and may increase the risk of a crash and injury without warning.
The problem is… | Certain compression fittings on the brake treadle valve may not have received appropriate torque. |
What your dealer will do… | Dealers will inspect and tighten the compression fittings. |
What you must do … | Contact your Kenworth Dealer to schedule an appointment for repair |
Kenworth has initiated a recall to remedy the defect. Please contact your Kenworth dealer. To find your Kenworth dealer, please visit Dealer Locator at www.Kenworth.com. This repair may require up to 1.0 hour of labor depending on vehicle configuration and dealer scheduling. This repair will be performed at no charge to you.
If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. Receipts for parts and/or labor are required for consideration of reimbursement.
If you require further information about this campaign, reimbursement of a pre-notification remedy associated with this recall, or experience any difficulty in making arrangements for this repair, please contact Kenworth Customer Service and provide your name, your dealer’s city and state, your phone number, your email address (optional), the last 8 digits of your VIN, the bulletin number, and your question, using one of the following:
Email: Kenworth.Campaigns@paccar.com with the bulletin number in the subject line
or
Mail: Kenworth Truck Company, PO Box 1000, Kirkland, WA 98083-1000, Attn Customer Service Department
or
Phone: 425-828-5888.
If you conclude that Kenworth Truck Company has not enabled you to remedy this defect in a reasonable time and without charge, you may submit a complaint to: Administrator,National Highway Traffic Safety Administration, 1200 New Jersey Avenue, S.E., Washington, DC 20590; call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or visit https://www.safercar.gov.
Federal regulation requires that any vehicle lessor receiving this recall notice forward a copy of this notice to the lessee within ten days. If you no longer own this vehicle, we would appreciate your advising Kenworth of the new owner’s, if you know their name.
We regret any inconvenience that this work may cause you and appreciate your cooperation in this matter.
Thank you,
Gordon Clark
Director of After Sales
Kenworth Truck Company
Scan this QR code to open the Kenworth Dealer Locator.
2 Affected Products
Vehicles
MAKE | MODEL | YEAR |
KENWORTH | T270 | 2020 |
KENWORTH | T370 | 2020 |
9 Associated Documents
Recall Quarterly Report #3, 2020-1
RCLQRT-19V606-7604.PDF 211.321KB
Recall 573 Report- Amendment 1
RCLRPT-19V606-2064.PDF 212.89KB
Recall Acknowledgement
RCAK-19V606-9147.pdf 245.295KB
Manufacturer Notices(to Dealers,etc)
Defect Notice 573 Report
RCLRPT-19V606-5312.PDF 212.874KB
Remedy Instructions and TSB
RCRIT-19V606-9135.pdf 278.159KB
Recall Quarterly Report #2, 2019-4
RCLQRT-19V606-7982.PDF 211.242KB
Recall Quarterly Report #1, 2019-3
RCLQRT-19V606-6966.PDF 211.139KB
Owner Notification Letter(Part 577)
RCONL-19V606-2207.pdf 150.958KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V606&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- ✅ Brief Description: You'll get 180 pieces of compression fittings including compression sleeve ferrule, Insert and nuts of 4 different sizes for your convenience.
- ✅ Sizes : 🔷 1/4 inches- 20pcs compression sleeve ferrule, 20pcs compression insert & 8pcs nuts 🔷 3/8 inches- 20pcs sleeve ferrule, 20 pcs insert & 8pcs nuts🔷 5/16 inches- 20pcs sleeve ferrule, 20 pcs insert & 8pcs nuts🔷 1/2 inches- 15pcs sleeve ferrule, 15 pcs insert & 6pcs nuts.
- ✅ High-Quality Material: Solid , High Quality and durable brass construction. Lead Free, Corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- ✅ Easy to Use: These fittings are easy to assemble requiring no soldering, flaring or deburring. Standard Compression Fittings are suitable for a wide variety of applications.
- ✅ Applications:This brass compression kit can be connected to copper, brass, aluminum, or plastic tubing. No flaring tool is required for assembly.It can keeps plastic tube from collapsing when tightened. And prevent leakage.
- 🔧【High Quality 】- Our brass compression fittings kit is made of high-quality brass, with strong wear,corrosion resistance, high compressive strength, durability, low magnetic permeability and high temperature ductility.
- 🔧【Widely Use】- Brass compression tube fittings meet specifications and standards of ASA, ASME asn SAE. Good sealing and repeatability, temperature and pressure resistance. Perfect fit for oil, gas, water and other non-corrosive or corrosive pipeline systems , no need for welding and flaring tools, easy disassembly, installation and maintenance, etc.
- 🔧【WORKING PRESSURE & TEMPERATURE】 - 2000 PSI maximum working pressure, temperature range -65°F to +250°F (-53°C to +121°C)
- 🔧【You Will Get】- Brass air line compression fittings contain: 1/8"-4 pcs, 3/16"-4 pcs, 1/4"-4 pcs, 5/16"-4 pcs, 3/8"-4pcs,and 1/2"-2 pcs compression coupling. 1/8"-4 pcs, 3/16"-4 pcs, 1/4"-4 pcs, 5/16"-4 pcs, 3/8"-4 pcs,and 1/2" -4 pcs compression sleeves ferrules. Total 46 pcs Brass Compression Fittings.
- 🔧【Tips】- These copper tubing fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.
- Kit contains 6sizes: 1/8"(2 pcs), 3/16"(10 pcs), 1/4"(4 pcs), 5/16"(2 pcs), 3/8"(2 pcs) and 1/2" (2 pcs)compression coupling, total 22pcs.
- Each assortment contains a specific collection of fast moving fittings that should be kept on hand when working with automotive hydraulic braking systems.
- This compression union assortments are designed for specialty and general repair shops.
- Meets specifications and standards of ASA, ASME asn SAE.
- Compression unions for joining copper, brass, or aluminum tubing in low-pressure applications
- ★Suitable for the outer diameter of the pipe:1/4" 5/16" 3/8" 1/2"
- ★Material: Brass.Corrosion resistance, ductility at high temperatures, and low magnetic permeability.
- ★Used with plastic and copper tubing.
- ★Package Include:30PCS 1/4" ,20PCS 5/16",15PCS 3/8" ,10PCS 1/2" Sleeves Ferrules and Insert ,Total is 150PCS Brass Compression Fitting.
- ★Application: Commonly used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way.
- Size: 6AN male flare to 3/8 inch, the thread size of the 6 AN is 9/16 UNF. Fits to 3/8" OD hardline, please measure before purchase.
- Material: Made of aluminium alloy fitting and brass ferrule.
- Sealing: The AN thread of the flare is sealed by a 37 degree angle.
- Application:This 3/8 compression to 6an fitting is widely used in fuel delivery, fuel system, engine modification, etc.
- Note:Only applicable to stainless steel or aluminum hardline.
- Type: Standard 3/8" Tube OD (Compression) male to 3/8" Tube OD (Compression) male.Compression nuts and ferrules included.5pcs
- Reducing adapter for different size tube pipes or fittings,Both fitting connects to tubing end.
- Tube OD Compression Straight Coupling Adapter for converting Aluminum, Plastic, and Copper straight compression thread pipe Tubing.
- Heavy-duty brass construction with rust proof, corrosion resistance, high temperature ductility and low magnetic permeability
- ★【Package include】40 pcs 1/8" ,40 pcs 3/16", 50 pcs 1/4", 30 pcs 5/16", 30 pcs 3/8", 20 pcs 1/2" Total 210pcs and placed in a complete Box.
- ★【Application】Connects to copper, brass, aluminum, or plastic tubing, used to connect lines for air,water,fuel,oil and inert gases in a quick and simple way.
- ★【Material】Made of pure brass, ductility at high temperatures, and low magnetic permeability, strong, corrosion-resistant, durable.
- ★【Limit level】3000 PSI working pressure, Temperature range of -65°F to 250°F (-53°C to 121°C)
- ★【Guarantee】We guarantee that our products are of high quality and affordable. We are committed to providing better service, cherish every customer, and hope you can have a better shopping experience.
- 【Easy to Install】: MuHize compression fitting is much easier than replacing, bending, and flaring new lines. Compression fittings for copper pipe are easy to disassemble no flaring tool is required. Just make sure the cuts to the original lines are clean and these will outlast the rest of the line with no leaks.
- 【Rust-Proof Reliability】: MuHize brass compression union fitting is built to last, protecting your brake lines from corrosion in harsh conditions.
- 【Versatile Compatibility】: This high-quality brass union works seamlessly with copper, brass, aluminum, or plastic tubing, suitable for most automotive applications.
- 【Size & Package Includes】: 5/16" Tube OD x 5/16" Tube OD. MuHize compression Tube Fitting mainly consists of a fitting body with a 24-degree tapered hole, a ferrule with a sharp inner edge, and a nut for compression(pack of 4).
- 【Working Principle】: MuHize compression Tube Fitting is to compress the ferrule by thread interlocking, and the two ends of the inner diameter of the ferrule tightly wrap the tube due to radial shrinkage, which plays a sealing role and realizes the sealing and tightening effect between the joint and the tube.
- Type: Compression Union
- Tube Size:3/16" OD
- Materies: BRASS
- Net Weight: 17.5g/PC
- Choosing products dimensions and quantities at column of size and colour seperately,price would be more favorable if choosing wholesale.
- 304 Stainless Steel
- Coupler Ferrule Mini Inner Dia : 1/2“
- Adapter for connecting pipes or fittings of different types.
- High Qunatity : This fitting is made of chemically hardened type 304 stainless steel that provides higher strength and greater corrosion resistance than untreated stainless steel.
- Double ferrule fitting reduces possibility of leakage
Last update on 2024-03-22 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.