“This site contains affiliate links for which OEMDTC may be compensated” |
August 4, 2023 NHTSA CAMPAIGN NUMBER: 23V552000
A broken steering arm and tie rod can separate and fall to the ground, increasing the risk of a crash.
NHTSA Campaign Number: 23V552
Manufacturer Nelson Trailers
Components STEERING
Potential Number of Units Affected 1
Summary
Nelson Trailers (Nelson) is recalling one 2018 CBC-40ST trailer equipped with a Dexter Smart-Steer Axle with a bolt-on steering arm. The steering arm may break during certain conditions, such as low speed and high side-loading.
Remedy
The affected trailer has been repaired, free of charge. Owners may contact Nelson customer service at 1-419-523-5321.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
Notified by recall letter from Dexter Axle October 17, 2022
22E080 – Steering Arm May Fracture – Dexter Axle Smart-Steer 2.0 Self-Steering Axles
22E080 – Steering Arm May Fracture – Dexter Axle Smart-Steer 2.0 Self-Steering Axles
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
NELSON | CBC-40ST | 2018 |
2 Associated Documents
Recall Acknowledgement
RCAK-23V552-5631.pdf 645.295KB
Defect Notice 573 Report
RCLRPT-23V552-2311.PDF 212.696KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V552&docType=RCL
- [MORE POWERFUL] Up to 135 Amp output allows you to weld mild steel up to 2/5” in the plate. Suitable for 2LB .030” & .035” flux core wire.
- [MULTI-PROCESS] 3-in-1 Welder, capable of Gasless MIG/Stick/Lift TIG. (need to buy an extra lift TIG torch) Meets your various welding needs.
- [DIGITAL DISPLAY] Advanced digital display, increases the visual clarity and improves the efficiency of the operation.
- [SYNERGIC CONTROL] When adjusting the wire feeding speed, the voltage will be automatically matched. Suitable for beginners and professionals.
- [SAFETY FIRST] Automatic compensation for voltage fluctuation, over current protection, over load protection.
- SYNERGIC CONTROL: The recommend current and wire feeding speed will be automatically matched after selected diameter of the welding wire(you can choose .030”/.035”/.040" flux core wire). The MIG welder is easier for beginners or those that are learning to weld and want to make small repairs around the house. 1 Free Flux Core Wire .030".
- 3-IN-1 WELDER: 3 welding modes Flux Core Gasless MIG/ Lift TIG/ MMA meet your different requirements (Need to buy extra Lift tig torch). Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of carbon steel, stainless or even thicker steel, Ideal for home DIY, outdoor repairs, rusty metal, farm and road equipment, and maintenance and repairs.
- SAFETY PROTECTION: The welder comes with an attached MIG torch and power cable, you can weld after unpacking the box, it’s convenient to use. Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine.
- PORTABLE AND COMPACT: The machine weighs only 11.79 pounds, and you can freely carry it anywhere with a handle or shoulder strap. Package includes 1* MIG130 Welder, 1* MIG Torch, 1*Ground Clamp, 1* Electronic Holder, 1* .030"/2lb Flux Cored Wire,1* 0.8/.030" conductive Nozzle,1* 0.9/.035" conductive Nozzle,1* Brush&Hammer,1* User Manual.
- WARM SERVICE & 2-YEAR WARRANTY: 30-Day Money Back Guarantee and 2-Year Warranty. Ideal for fathers day gifts. Every single of our welder machines passed various authoritative Laboratory tests in simulating extremely harsh environments before leaving our ARCCAPTAIN factory that conforms to the high standards.
- WELD ANYWHERE: Plug in the Weld-Pak 90i MIG wire feed welder anywhere 120V input power is available; It's designed to use with flux-cored welding wire (1/4” max thickness) or solid MIG wire (3/16" max thickness)
- ACCESSORIES INCLUDED: The machine comes with a full list of accessories including a welding gun, nozzle, contact tip, work cable and clamp; Metal case provides protection from the elements
- LIGHT & PORTABLE: Ideal for maintenance and mobile welders, thanks to its small and lightweight (15 lbs) inverter design and shoulder strap for portability; A good choice for professionals but it’s an easy to use welder for beginners too
- SMOOTH & EASY OPERATION: Has simple control with two knobs for wire speed and voltage; Inverter power source makes it more efficient to operate and provides smoother weld characteristics compared to traditional welders
- PERFECT FOR SMALL WELD JOBS: This machine is best for DIY projects, hobbyists, home repairs and more; Infinite welding voltage allows fine-tuning of weld characteristics
- Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.
- Multi-functions in one machine: Suitable for stick, lift TIG(torch is not included), flux MIG, gas MIG
- Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate.
- Big enough to apply to 2 and 10 pounds rolls of wire. Ready to feed .030"(0.8mm) with solid core wire, and .035" (0.9mm)with flux core wire.Can Handle E7018 basic electrode.
- Dual voltage input design: Welding machine can be plugged into 110(120)V / 220(230)V dual voltage (Automatic fitting).
- 4 in 1 Welding Machine:This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,4 welding modes for you to choose.
- Synergic Control: Adjusting the amperage or choosing different wire thicknesses,the voltage and wire feeding speed will automatically change.Even a beginner can easily use it.
- Gas/Gasless Welding: You can choose Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder Can handle 2 lb and 10 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, MAX Welding Thickness 8.0mm.
- Lift TIG/ARC Welding: Lift TIG available,TIG Torch fits WP17V, not included in the package.TIG Welding thickness 1.0MM-8.0MM, Suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel etc.Arc Welding fits rods E6013.
- Powerful And Safe Machine:This 200A Welding machine can weld mild up to 8.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.
- 【EASY TO USE】: The welding machine has included with voltage control knob,wire speed adjustment knob and with synergic control, automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. Even beginners can use it easily.
- 【POWERFUL AND SAGE WELDER MACHINE】: This 130A Welding machine can weld mild up to 3.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.Big enough to handle 2.2 pound rolls of wire.
- 【PORTABLE DESIGN】: Lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want; It only weighs 8.6 lbs., so you can effortlessly take it as far as you can.
- 【WIDE APPLICATIONS】: It can be used with a wide variety of metals and alloys. Suitable for home users, DIY craft enthusiasts, beginners and small projects.
- 【PACKAGE INCLUDES】: 130 MIG welding machine; Mig torch; Ground clamp; Brush&Hammer; 1lb .030" flux cored welding wire; Contact Tip*2.
- 【POWERFUL 3-IN-1 MIG WELDER】The 135Amp MIG welder that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA. The machine is delivered ready for operation without adjustments with 0.8 mm diameter filler wire.Also, 0.6 mm, 0.9 mm or 1.0mm solid wire or cored wire can be used as filler wire.
- 【SYNERGIC CONTROL】Adjusting the welding power according to sheet thickness affects simultaneously both wire feed speed and amount of current lead to the wire. This is a good starting point for welding in different operating situations.It's suitable for both hobby and professional use.
- 【IGBT TECHNOLOGY】IGBT intelligent inverter technology. IGBT power device with unique control mode improves the reliability of welding machine. The flux core welder works more efficiently, reduces energy loss, and welds better.
- 【PACKAGE INCLUDED】1*MIG/MMA Welder; 1*8.2ft CCA cable with 200A Electrode holder; 1*8.2ft CCA cable with 200A Earth clamp; 1*8.2ft Power cable with American standard plug; 1*8.2ft fixed MIG; 1*slag hammer; 1*User Manual
- 【SAFETY & DURABLE】The machine has passed a variety of professional tests and certifications before leaving the factory.The welding gun has an overheating protector which prevents operation when the machine is overheated. The machine is also protected from too low or too high supply voltage.
- ➠【𝐒𝐲𝐧𝐞𝐫𝐠𝐢𝐜 𝐌𝐈𝐆 𝐂𝐨𝐧𝐭𝐫𝐨𝐥】The wire feeding speed (current) and welding voltage will be automatically matched after selected diameter of the welding wire (.030/.035 inch flux core wire). The MIG welder is easier to make a beginner becoming a master welder.
- ➠【𝐒𝐦𝐚𝐫𝐭 𝐒𝐭𝐢𝐜𝐤 𝐖𝐞𝐥𝐝】Bulit-in smart Hot-start and Arc-force provide easy, quick and reliable arc start, and stable welding current, this mini welder has ideal performance for the most E6013, E6011, E6010, E7018 and E308-16 rods.
- ➠【𝐋𝐢𝐟𝐭 𝐓𝐈𝐆 𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧】This 3 in 1 welder has excellent Lift-arc TIG function, just touch the tungsten rod to the workpiece and lift off, easily arc starting, don't need to scratch it, it's like you getting a TIG welder for free.
- ➠【𝐒𝐚𝐟𝐞 𝐚𝐧𝐝 𝐒𝐭𝐚𝐛𝐥𝐞】This multiprocess welder built-in automatic Anti-stick, compensation for voltage fluctuation, over current protection, over heat protection, short circuit damage protection, to make sure the welding kit safely operation and long life.
- ➠【𝐖𝐢𝐝𝐞 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞】The wire feed welder is capable of welding all kinds of ferrous metals such as carbon steel, medium carbon steel, mild steel, stainless steel and cast iron. Only weighs 10.1 lbs, easy to carry with a handle or shoulder strap(included), very suitable for outdoor maintenance, farm, road equipment, and home DIY.
- Simple user interface - Seven segment display with basic knob controls.
- Process Capabilities - MIG, Flux-Cored and Spool Gun.
- Dual Input Voltage - 120V and 230V inputs so you can plug into any common power supply.
- Ergonomic Case - Sleek and robust case design with multiple lift points for ease of mobility around the shop.
- Lightweight and Portable - Only 41 lbs
- 【POWERFUL 3-IN-1 WELDER】Composed with Flux MIG, Lift TIG and Stick/MMA. Our powerful 3-in-1 welding machine meets your requirement for different welding situations like home DIY, outdoor maintenance and repairs, etc. (NOTE: the lift tig torch is not included)
- 【SYNERGIC CONTROL】Equipped with precise data, this flux core welder will automatically match the most suitable voltage, wire feeding speed by adjusting amperage, which is quite friendly for both professional welding worker and beginner. You can also adjust machine parameters by manually In order to best suit for your demand.
- 【SAFE & INTELLIGENT】Our MIG welder features overheat and overload protection will automatically shut off while overheated, and the built-in fan will consistently cool down your welder for 1-2 mins after shutdown. Additionally, the intelligent IGBT technology helps the welder reduce energy loss and works more efficiently.
- 【LIGHTWEIGHT & DURABLE】Item Dimensions: 13.6(L) x 6.6(W) x 11.15(H) inches, welder machine weight: 10.14lbs. This lightweight 135amp stick welder designed with two portable handles, allows you to take it anywhere, and you can add a shoulder belt by your own if need. Besides, IP21 water rating better protect your welder and extend its service life.
- 【SET INCLUDES】To spend you less money and bring you more convenience, our 3-in-1 welder set includes a solar powered auto darkening welding helmet (viewing size: 3.66"x1.69"), a pair of 932°F/500℃ heat resistant leather welding gloves and a roll of E71T-GS .030" 2lb flux core welding wire.
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-552 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Nelson Trailers Submission Date : AUG 04, 2023 NHTSA Recall No. : 23V-552 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Nelson Trailers Address : 6448 Rt 224 Ottawa OH 45875 Company phone : 419-523-5321 Population : Number of potentially involved : 1 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2018-2018 Nelson CBC-40ST Vehicle Type : TRAILERS Body Style : OTHER Power Train : NR Descriptive Information : Received recall letter 22E-080 for a deffective component on an axle. We only used (1) axle that was affected by this recall. The trailer that it was installed on was identified. Production Dates : MAY 18, 2018 – MAY 18, 2018 VIN Range 1 : Begin : 1n9G62A44J1012142 End : 1N9G62A44J1012142 Not sequential Description of Defect : Description of the Defect : Dexter Smart Steer Axle with bolt on steer arm may fracture at low speed during high stress as described in Dexter recall 22E-080 FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The fractured steer am and attached tie rod may fail and fll to the ground causing a risk for separation. There is no loss of control of the unit when this failure occurs. Description of the Cause : Axle manufacturer recall Identification of Any Warning that can Occur : Independent castering of the steer axle and noise from dragging parts. Involved Components : Part 573 Safety Recall Report 23V-552 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Dexter Axle Component Description : Dexter Smart Steer Axle Component Part Number : 702887 Supplier Identification : Component Manufacturer Name : Dexter Axle Company Address : 2900 Industrial Parkway East Elkhart Indiana 46516 Country : United States Chronology : Notified by recall letter from Dexter Axle October 17, 2022 Description of Remedy : Description of Remedy Program : Only affects (1) unit. Nelson records axle serial numbers and was able to immediately identify the subject trailer. How Remedy Component Differs from Recalled Component : Trailer axle is repaired per Dexter Safety bulletin SB015 Identify How/When Recall Condition was Corrected in Production : Nelson only ever received 1 axle subject to this recall. Recall Schedule : Description of Recall Schedule : Customer has already been notified and the repairs per SP015 have been completed. Planned Dealer Notification Date : AUG 04, 2023 – AUG 04, 2023 Planned Owner Notification Date : AUG 04, 2023 – AUG 04, 2023 * NR – Not Reported
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
**************************************************************************************************************
SEOCONTENT-END