REC 002-23 – Driveshaft Separation – 2021 Xos RM01, SA01, & 2021-2022 SV05

March 3, 2023 NHTSA CAMPAIGN NUMBER: 23V145000

Driveshaft Separation

Loose bolts may allow the driveshaft to separate, causing a loss of drive power and increasing the risk of a crash.

 

NHTSA Campaign Number: 23V145

Manufacturer Xos, Inc.

Components POWER TRAIN

Potential Number of Units Affected 275

 

Summary

Xos, Inc. (Xos) is recalling certain 2021 RM01, SA01, and 2021-2022 SV05 vehicles. The bolts connecting the electronic parking brake rotor to the driveshaft may have been improperly tightened.

 

Remedy

Dealers will replace the bolts and related hardware, free of charge. Owner notification letters are expected to be mailed March 28, 2023. Owners may contact Xos customer service at 1-818-316-1890. Xos’s number for this recall is REC 002-23.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

On February 9, 2023, Xos engineering initiated an investigation into reports of drive shaft separations involving the subject vehicles. A review of service records indicated that there had been four reports involving three vehicles (one owner reported a second occurrence on the same vehicle). On February 15, 2023 the engineering team concluded that the torque specification applied to the bolts connecting the driveshaft to the electronic park brake was too low for the application and identified the proper torque specification.

On February 24, 2023, the topic was presented to Xos’s Product Safety Committee. Based upon the information presented, the Product Safety Committee decided to initiate a recall to address this condition. To date, there have been four reports between October 13, 2022 and February 8, 2023 related to this issue, with no reports of accidents or injuries related to this condition.

 


4 Affected Products

Vehicles

MAKE MODEL YEAR
XOS RM01 2021
XOS SA01 2021
XOS SV05 2021-2022

 


3 Associated Documents

Defect Notice 573 Report

RCLRPT-23V145-5825.PDF 215.431KB

RCLRPT-23V145-5825

 


Recall Acknowledgement

RCAK-23V145-4223.pdf 645.149KB

RCAK-23V145-4223

 


Manufacturer Notices(to Dealers,etc) – Thu, Mar 16, 2023

RCMN-23V145-6875.pdf 89.274KB

RCMN-23V145-6875

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V145&docType=RCL

 


 

Bestseller No. 1
EPAuto 1/2-inch Drive Click Torque Wrench, 10~150 ft./lb., 13.6 ~ 203.5 N/m
  • Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
  • Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
  • Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
  • Accessories included: 1/2" Drive 5" long Extension Bar and 1/2" Drive to 3/8" Drive Reducer
  • Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
SaleBestseller No. 2
LEXIVON 3/8-Inch Drive Click Torque Wrench 10~80 Ft-Lb/13.6~108.5 Nm (LX-182)
  • PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
  • DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
  • LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
  • PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
  • COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
SaleBestseller No. 3
LEXIVON Inch Pound Torque Wrench 1/4-Inch Drive | 20~200 in-lb/2.26~22.6 Nm (LX-181)
  • PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
  • DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
  • LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
  • PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
  • COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
SaleBestseller No. 4
LEXIVON 1/2-Inch Drive Click Torque Wrench 25-250 Ft-Lb/33.9-338.9 Nm (LX-184)
  • PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
  • DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
  • LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
  • PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
  • COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
SaleBestseller No. 5
LEXIVON 1/2-Inch Drive Click Torque Wrench 10~150 Ft-Lb/13.6~203.5 Nm (LX-183)
  • PRECISE - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
  • DURABLE - Reinforced ratchet gear head constructed from hardened, heat-treated Chrome Vanadium alloy steel.
  • LONGEVITY - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
  • PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even under low-light conditions.
  • COMFORT - Comes with a reversible ratchet head that drives in both directions and measures torque in a clockwise direction.
SaleBestseller No. 6
CRAFTSMAN Digital Torque Wrench, SAE, 1/2-Inch (CMMT99436)
  • QUICK IDENTIFICATION: Torque wrench 1/2 inch drive has a durable clear case for quick tool identification
  • FAST TORQURE CHANGES: CRAFTSMAN 1/2 torque wrench converts torque from ft./lb. to in/lb. to Nm at the touch of a button
  • EASY READOUT: An LED backlit screen of the CRAFTSMAN torque wrench makes it easy to see every readout
  • CONVENIENCE: Click style is perfect for small engine repairs four-wheelers motorcycles brakes engines and more
  • ADDED COMFORT: Comfortable handle with ergonomic styling and provides a sure grip
Bestseller No. 7
TEKTON 3/8 Inch Drive Micrometer Torque Wrench (10-80 ft.-lb.) 24330
  • Includes 1-pc. 3/8 in. drive torque wrench; Storage case; Product manual with torque conversion chart
  • Wrench emits a click that can be heard and felt when the preset value is reached
  • Permanently marked, high-contrast dual-range scale is easy to read, even in low light
  • Reversible ratchet head drives in both directions and measures torque in clockwise direction
  • Durable all-steel construction has no plastic parts to break or wear out
Bestseller No. 8
HORUSDY 3/8-Inch Drive Click Torque Wrench, 10~80 Ft-Lb | 13.6~108.5 Nm, Quick Release Ratchets.
  • The Durable Ratchet Gear Heads are Nade of Hardened Heat-Treated Chromium Vanadium Alloy Steel (Cr-V) . Non-Slip Knurled Handle. Black Electroplating Surface Treatment, Rust Resistant, Corrosion Resistant.
  • Accurate: Pre-Calibrated to ± 4%.High Contrast & Dual Range Scale, Include Measurement Instructions with Calibration.
  • The quick-release reversible head design is used to replace the socket by touching the middle part, and the driving direction can be changed by flipping the biased drive switch.
  • Simple and Reliable Operation, Equipped with Bidirectional Drive Ratchet Head to Measure Torque Clockwise.
  • Easy to Store and Includes a Sturdy Plastic Storage Box. Accessories included: 3/8" to 1/4" drive adapter , 3/8" to 1/2" drive adapter and 3/8" drive extension bar
SaleBestseller No. 9
EPAuto 1/2-inch Drive Click Torque Wrench, 10~150 ft./lb, 13.6~203.5 N/m, Black
  • Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
  • Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
  • Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to +- 4%
  • Accessories included: 1/2" Drive 5" long Extension Bar and 1/2" Drive to 3/8" Drive Reducer
  • Simple and Reliable: "Click" sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
Bestseller No. 10
CRAFTSMAN Torque Wrench, SAE, 1/2-Inch Drive (CMMT99434)
  • PORTABILITY: Torque wrench 1/2 inch drive has a durable case for portability or storage
  • ADDED COMFORT: Bi-material handle for comfort and grip of the 1/2 torque wrench
  • HASSLE FREE USE: Locking feature adjusts quick and easily for hassle free use
  • QUICK IDENTIFICATION: Scales stamped into housing showing inch and metric torque settings
  • Meets or Exceeds ASME Specifications

Last update on 2023-03-07 / Affiliate links / Images from Amazon Product Advertising API

This product was presentation was made with AAWP plugin.

 


 

 

Leave a Comment

Share to...