“This site contains affiliate links for which OEMDTC may be compensated” |
March 3, 2022 NHTSA CAMPAIGN NUMBER: 22V121000
Damaged Valve Stem May Cause Loss of Tire Pressure
Damage to the valve stem extension may result in a loss of tire pressure of the inner wheel, increasing the risk of a crash.
NHTSA Campaign Number: 22V121
Manufacturer Jayco, Inc.
Components TIRES
Potential Number of Units Affected 1,055
Summary
Jayco, Inc. (Jayco) is recalling certain 2019-2022 Seneca, Seneca Prestige, Entegra Accolade and Accolade XL motorhomes. The tire valve stem extension for the inner wheel may come into contact with the outer wheel rim opening and become damaged.
Remedy
Daimler Trucks North America, LLC will remove the inner valve stem extension and stabilizer, free of charge. Owner notification letters were mailed April 28, 2022. Owners may contact Jayco customer service at 1-800-283-8267. Jayco’s number for this recall is FL912 21V-921.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
January 2022
FL912AB
NHTSA #21V-921
Subject: FCCC Motorhome Valve Stem Stabilizers
Models Affected: Specific model years 2017-2023 FCCC MBC, MC, MT55, S2C, S2G, S2RV, XBR, XBS, XCL, XCM, XCR, and XCS chassis manufactured February 20, 2017, through November 18, 2021, and equipped with a valve stem extension and stabilizer configured with a specific tire valve stem and wheel combination.
Chronology :
1/24/2022 A retail owner contacted Jayco Customer Service inquiring about a notification of a recall they received from Daimler for recall 21V-921.
1/28/22 Jayco Compliance contacted Daimler about the recall and they sent a list of affected VINs to Jayco.
1/31/2022 Warranty Incident Review Committee (WIRC) discussed this incident and elevated to the Corrective and Preventive Action Committee (CPAC).
2/2/2022 CPAC met to discuss this incident and elevated this incident to the Safety Steering Committee (SSC).
On 2/24/2022 SSC met and voted that a safety recall was appropriate for this incident.
2017-2023 Freightliner Custom Chass FL912 Damaged Valve Stem May Cause Loss of Tire Pressure
FL912 Damaged Valve Stem May Cause Loss of Tire Pressure – 2017-2023 Freightliner Custom Chass
16 Affected Products
Vehicles
MAKE | MODEL | YEAR |
ENTEGRA | ACCOLADE | 2019-2022 |
ENTEGRA | ACCOLADE XL | 2019-2022 |
JAYCO | SENECA | 2019-2022 |
JAYCO | SENECA PRESTIGE | 2019-2022 |
8 Associated Documents
Recall 573 Report – 3/8/2022
RCLRPT-22V121-3992.PDF 215.5KB
Defect Notice 573 Report
RCLRPT-22V121-5786.PDF 215.133KB
Recall Acknowledgement
RCAK-22V121-3640.pdf 696.254KB
Recall 573 Report – 3/21/2022
RCLRPT-22V121-5976.PDF 215.556KB
Recall 573 Report – 4/14/2022
RCLRPT-22V121-4417.PDF 215.554KB
Remedy Instructions and TSB
RCRIT-22V121-3090.pdf 121.949KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V121-0188.pdf 169.97KB
Manufacturer Notices(to Dealers,etc)
RCMN-22V121-9005.pdf 167.135KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V121&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- Package includes: there are a total of 4 pieces stainless steel valve stem extensions and 6 pieces brass valve stem extenders in the package, with different lengths and angles, give you multiple choices, thoughtful combination can meet your daily use demands, and adequate quantity allows you to share with your neighbors, colleagues and so on
- Quality material: the nut of the braided valve stem extender is made of reliable copper, and the braided flexible hose is made of stainless steel, sturdy and solid, will not break or deform easily, can serve you for a long time; And the tire valve stem extension is made of brass, with metallic luster, can keep bright after long term use, the surface and edge are polished carefully, do not worry they will scratch your hands while using, not easy to wear and tear
- Convenient to install: first screw the metal valve stem extender on your tire valve, then connect the hose to the tire inlet through the valve stem extension to inflate the tire, you can choose different angles according to your actual needs, the right angle bend allows easy access for the pump, the operation is simple, and convenient to use
- Wide application: this valve stem tool can be widely applied on most cars, such as RVs, passenger cars, trucks, motorcycles, trailers, bicycles and recreational vehicles with standard American tire valves, provides convenience for your life, and making your inflating process more simple and smooth
- Diverse lengths and angles: these flexible extensions feature 2 lengths, measuring approx. 7 inches and 12 inches,various sizes for you to choose ; And these tyre valve extension adaptors are designed with 3 different angles, which contain 45 degrees, 90 degrees and 135 degrees, practical and useful
- Packaged Include: 5Pieces Inflate Through High Pressure Valve Stem Caps,5Pieces Tire Stem Valve Caps with O Rubber Ring,5Pieces O Rubber Ring for replacement.Replaces any standard valve stem cap as well as V2B and DS-1
- Premium Material - Heavy duty design,more durable, more strong, are made of good quality solid brass, can effectively prevent rust and corrosion,which is durable and is not easy to break or deform,can still be used for a long time.
- ESAY TO INSTALL - All tire valve caps has stripes around the top dome shape, easier to grab and tighten, more convenient.Gauge and inflate valve extensions directly through the cap
- UNIVERSAL STEM TIRE VALVE CAPS:Commonly used for Commercial trucks, RV's, Trailers and Semi's but can used on anything with a valve stem.3/4" total effective length.
- Superior Safety – No leakage during use, hold the Pressure Well.Valve has two seals and is protected by a solid, all metal housing with a durable, high-temperature- resistant rubber o-ring inside. Safety feature causes seal to tighten to prevent air loss in case the valve fails.Maximum working pressure is 150PSI.
- Solid metal valve extenders make hard to reach valves accessible.Fit Type: Universal Fit
- Includes four metal extenders
- 1.25-inch extenders
- No need to remove valve cores before installing
- Perfect for duallys, RVs and all hard to reach valves
- Packaged Include: 5Pieces Inflate Through High Pressure Valve Stem Caps,5Pieces Tire Stem Valve Caps with O Rubber Ring,5Pieces O Rubber Ring for replacement.Replaces any standard valve stem cap as well as V2B and DS-1.Easy to install and simply screw onto current tire stem, without additional dust cap required.Fast and effortless make regular tire pressure checks,increase you safety on the road.
- Premium Material - Heavy duty design,more durable, more strong, are made of good quality solid brass, can effectively prevent rust and corrosion,which is durable and is not easy to break or deform,can still be used for a long time.
- ESAY TO INSTALL - All tire valve caps has stripes around the top dome shape, easier to grab and tighten, more convenient.Gauge and inflate valve extensions directly through the cap.Makes it so much easier to air up tires and regular pressure checks.
- UNIVERSAL STEM TIRE VALVE CAPS:Commonly used for Commercial trucks, RV's, Trailers and Semi's but can used on anything with a valve stem.1.57" total effective length.
- Superior Safety – No leakage during use, hold the Pressure Well.Valve has two seals and is protected by a solid, all metal housing with a durable, high-temperature- resistant rubber o-ring inside. Safety feature causes seal to tighten to prevent air loss in case the valve fails.Maximum working pressure is 150PSI.
- Package included: 2pcs; Material: Durable rubber with metallic valve end
- The Length of Tire Valve Extension is approx.210mm/8.25"; Width: 10.5mm/0.41"
- Swivel base,easy to use; It can be connected directly to the inflatable tool and is very convenient to use.
- Perfect fit for most truck, bus, motorcycle, RVs, campers, trailers, or other heavy vehicles, etc.
- ★NOTE: Exclusive design, details of the product are shown in the images.
- Three kinds of valve stem extension(45 degree, 90 degree and 135 degree)successfully solved a series of operations such as inability to pump or check air pressure due to insufficient space between the valve and the spokes, or the inconvenient position and angle of the valve. Due to the built-in valve core, they can allow inflation and deflation, which is convenient and quick. Be sure to tighten the thread when using it, otherwise the best sealing effect cannot be achieved.
- The tire valve extension joint is made of brass, the surface is chrome-plated, the chrome-plated layer has higher hardness, better heat resistance, and is not easy to rust. Equipped with rubber sealing ring and sealing cover, durable. The bottom of the extension piece rotates freely, which is easy to operate, convenient and efficient.
- Prevent air leakage! 1. Install the valve angle extension on the valve core, and be sure to tighten the thread of the rotating part so that there is no air leakage. 2. When you are adjusting the angle, you rotate the valve extension. After the angle adjustment is over, you must tighten the rotating thread to the maximum. 3. The threaded head on the valve extenders is screwed on the existing valve stem, and the included end cap replaces the existing valve stem cover.
- Our valve core adapters are equipped with rubber sealing rings and sealing caps to ensure air tightness without leakage. It is recommended to tighten the sealing caps quickly after use to prevent air leakage!
- These tire valve extensions suitable for most bicycles, motorcycles, strollers, trailers, RVs with standard American tire valves.
- Packaged Include: 5Pieces Inflate Through High Pressure Valve Stem Caps,5Pieces Tire Stem Valve Caps with O Rubber Ring,5Pieces O Rubber Ring for replacement.Replaces any standard valve stem cap as well as V2B and DS-1
- Premium Material - Heavy duty design,more durable, more strong, are made of good quality solid brass, can effectively prevent rust and corrosion,which is durable and is not easy to break or deform,can still be used for a long time.
- ESAY TO INSTALL - All tire valve caps has stripes around the top dome shape, easier to grab and tighten, more convenient.Gauge and inflate valve extensions directly through the cap
- UNIVERSAL STEM TIRE VALVE CAPS:Commonly used for Commercial trucks, RV's, Trailers and Semi's but can used on anything with a valve stem.1.55" total effective length.
- Superior Safety – No leakage during use, hold the Pressure Well.Valve has two seals and is protected by a solid, all metal housing with a durable, high-temperature- resistant rubber o-ring inside. Safety feature causes seal to tighten to prevent air loss in case the valve fails.Maximum working pressure is 150PSI.
- Our 100mm Valve Extension Stem Rod is made of high-quality pure copper, and the surface is treated with chromium plating, which makes the product more beautiful and durable. Comply with international common standards.
- Our 100mm Valve Extension Stem Rod has a built-in rubber sealing ring to ensure that it will not leak when inflated. The length of 4 inch can meet the extension of more than 95% of the tire valve cores of vehicles.
- Our 100mm Valve Extension Stem Rod can be used without installation tools, easy to carry, suitable for all road conditions, and can be used to quickly inflate and deflate tires.
- Our 100mm Valve Extension Stem Rod is suitable for trucks, RVs, campers, trailers, ATVs or other heavy vehicles
- Included:4pcs Tyre Valve Extension Rod Stem
- Package includes: there are a total of 2Pcs 7"/180mm stainless steel Hexagon Base Valve stem extensions and 2 pieces metal clamp bracket in the package,Hexagon shape swivel base design , easier to grab and tighten, No-leakage after long-term use.Gives easy access to hard-to-reach inner stems.Easily inflate the tire or make a pressure checks.
- Perfect solution for regular tire inflate and tire pressure checks.You can using these for your duallies. If you couldn't reach the inside stems.That's Very dangerous if you can't air up your inside tires. Keep it always on the road traveling. Add the extensions for you tires, you will have peace of mind that I can pull into any station and fill "all" your tires. convenience for your life, and making your inflating process more simple and smooth.
- Material:304 stainless steel Length:7Inch,approx 180mm.Reliable and durable:Made of copper nut and stainless steel braided flexible hose with an Heavey duty alloy clip to fix the adapter.Fit for trucks, RVs, campers, trailers, or other heavy vehicles.
- Universal Type, Work With Tire Valve Directly, Have A Clamp / Fastener To Work Directly with Dual Wheel. Easy WorkThe clamps to hold the valve stem extension from the inner tire, to the outer tire rim, making it easy to check/inflat tire pressure.
- Wide application: this valve stem tool can be widely applied on most cars, such as RVs, passenger cars, trucks, motorcycles, trailers, bicycles and recreational vehicles with standard American tire valves, provides convenience for your life, and making your inflating process more simple and smooth.
- How to use--- Rubber adaptor, one end can be connected on valve stem and the other end can be taken as replacement of the original valve stem; Brass adaptor, the adaptor screws onto your tyre valve and the right angle bend allows easy access for the pump or airline, increasing life of original tyre valve screw.
- Package Includes--- 2 x 12in valve stem extensions, 3 x brass valve stem extenders and 4 x tire valve caps, with enough lengths and angles, give you multiple choices.
- Wide Application--- Due to the built-in valve core, it can allow inflation and deflation, you can work more efficiently, check the pressure and fill the air. Tire valve extensions fits all cars, trucks, motorcycles, bicycles,trailers, motorhomes and recreational vehicles with standard American tire valves.
- Flexible Extension Adaptor--- It is made of brass and durable rubber, strong plasticity. The length of tire valve extension is approx. 300 mm/ 12 inch; Width: 10.5 mm/ 0.41 inch, make tire air valve extenders easy to access the valve stems on your tires, successfully solved the inconvenient position and angle of the valve.
- Reliable and Durable--- Made of brass, aluminium alloy and rubber, the valve stem extensions are sturdy and solid, which can be used for the long term. The precise weaving technology protects the inside of the product from damage.
Last update on 2024-04-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Subject: FCCC Motorhome Valve Stem Stabilizers Models Affected: Specific model years 2017-2023 FCCC MBC, MC, MT55, S2C, S2G, S2RV, XBR, XBS, XCL, XCM, XCR, and XCS chassis manufactured February 20, 2017, through November 18, 2021, and equipped with a valve stem extension and stabilizer configured with a specific tire valve stem and wheel combination. General Information Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Freightliner Custom Chassis Corporation, has decided that a defect that relates to motor vehicle safety exists on the vehicles mentioned above. Certain chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. A loss of air pressure in the inner tire on a motorhome with a single drive axle may overload the outer tire and increase the risk of a crash. The inner valve stem extension and stabilizer will be removed. There are approximately 18,500 vehicles involved in this campaign. Additional Repairs Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns before sale or delivery of a vehicle. Owners may be liable for any progressive damage that results from failure to complete campaigns within a reasonable time after receiving notification. Work Instructions Please refer to the attached work instructions. Prior to performing the campaign, check the vehicle for a completion sticker (Form WAR260). Replacement Parts Replacement parts are now available and can be obtained by ordering the kit and/or part number(s) listed below from your facing Parts Distribution Center. If our records show your dealership has ordered any vehicle(s) involved in campaign number FL912, a list of the customers and vehicle identification numbers will be available on DTNAConnect. Please refer to this list when ordering parts for this recall. Table 1 – Replacement Parts for FL912 Campaign Number Kit Number Part Description Part Number Qty. per Kit FL912A 25-FL912-000 Part Part # X ea BLANK COMPLETION STICKER WAR260 1 ea Table 1 Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 1 Removed Parts U.S. and Canadian Dealers, please follow Warranty Failed Parts Tracking shipping instructions for the disposition of all removed parts. Export distributors, please destroy removed parts unless otherwise advised. Labor Allowance Table 2 – Labor Allowance Campaign Number Procedure Time Allowed (hours) SRT Code Corrective Action FL912AB Removal of inner valve stem extension and stabilizer 0.1 996-R133A 12-Repair Recall/Campaign FL912AB Buff scratches on one wheel 0.3 996-R133B 12-Repair Recall/Campaign Table 2 IMPORTANT: When the Recall has been completed, locate the base completion label in the appropriate location on the vehicle, and attach the red completion sticker provided in the recall kit (Form WAR260). If the vehicle does not have a base completion label, clean a spot on the appropriate location of the vehicle and first attach the base completion label (Form WAR259). If a recall kit is not required or there is no completion sticker in the kit, write the recall number on a blank sticker and attach it to the base completion label. Claims for Credit You will be reimbursed for your parts, labor, and handling (landed cost for Export Distributors) by submitting your claim through the Warranty system within 30 days of completing this campaign. Please reference the following information in OWL: • Claim type is Recall Campaign. • In the Campaign field, enter the campaign number and appropriate condition code (FL912-A, or FL912- B). • In the Primary Failed Part Number field, enter 25-FL912-000. • No replacement parts are required. • In the Labor field, first enter the appropriate SRT from the Labor Allowance Table. Administrative time will be included automatically as SRT 939-6010A for 0.4 hours for RVs or 0.3 hours for all other vehicles. • The VMRS Component Code is F99-999-005 and the Cause Code is A1 – Campaign. • U.S. and Canada — Reimbursement for Prior Repairs. When a customer asks about reimbursement, please do the following: • Accept the documentation of the previous repair. • Make a brief check of the customer’s paperwork to see if the repair may be eligible for reimbursement. (See the “Copy of Owner Letter” section of this bulletin for reimbursement guidelines.) • Submit an OWL Recall Pre-Approval Request for a decision. • Include the approved amount on your claim in the Other Charges section. • Attach the documentation to the pre-approval request. • If approved, submit a based on claim for the pre-approval. • Reimburse the customer the appropriate amount. IMPORTANT: OWL must be viewed prior to performing the recall to ensure the vehicle is involved and the campaign has not been previously completed. Also, check for a completion sticker prior to beginning work. Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 2 U.S. and Canadian dealers, contact the Warranty Campaigns Department via Web inquiry at DTNAConnect.com/WSC, if you have any questions or need additional information. Export distributors, submit a Web inquiry or contact your International Service Manager. U.S. and Canadian Dealers: To return excess kit inventory related to this campaign, U.S. dealers must submit a Parts Authorization Return (PAR) to the Memphis PDC. Canadian dealers must submit a PAR to their facing PDC. All kits must be in resalable condition. PAR requests must include the original purchase invoice number. Export Distributors: Excess inventory is not returnable. The letter notifying U.S. and Canadian vehicle owners is included for your reference. Please note that the National Traffic and Motor Vehicle Safety Act, as amended (Title 49, United States Code, Chapter 301), requires the owner’s vehicle(s) be corrected within a reasonable time after parts are available to you. The Act states that failure to repair a vehicle within 60 days after tender for repair shall be prima facie evidence of an unreasonable time. However, circumstances of a particular situation may reduce the 60 day period. Failure to repair a vehicle within a reasonable time can result in either the obligation to (a) replace the vehicle with an identical or reasonably equivalent vehicle, without charge, or (b) refund the purchase price in full, less a reasonable allowance for depreciation. The Act further prohibits dealers from selling a vehicle unless all outstanding recalls are performed. Any lessor is required to send a copy of the recall notification to the lessee within 10 days. Any subsequent stage manufacturer is required to forward this notice to its distributors and retail outlets within five working days. Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 3 Copy of Notice to Owners Subject: FCCC Motorhome Valve StemStabilizers This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person. Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Freightliner Custom Chassis Corporation, has decided that a defect which relates to motor vehicle safety exists on specific Model Years 2017 – 2023 FCCC MBC, MC, MT55, S2C, S2G, S2RV, XBR, XBS, XCL, XCM, XCR, and XCS chassis manufactured February 20, 2017, through November 18, 2021, and equipped with a valve stem extension and stabilizer configured with a specific tire valve stem and wheel combination. Certain chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. A loss of air pressure in the inner tire on a motorhome with a single drive axle may overload the outer tire and increase the risk of a crash. The inner valve stem extension and stabilizer will be removed. Repairs will be performed by Daimler Trucks North America authorized service facilities. Please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. The Recall will take approximately one hour and will be performed at no charge to you. To locate an authorized dealer, search online at Daimler-TrucksNorthAmerica.com/contact-us/. Scroll down to “Locate a Dealer,” and select the appropriate brand. You may also confirm your vehicle’s involvement in this recall at this URL: https:// dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage. You may be liable for any progressive damage that results from your failure to complete the Recall within a reasonable time after receiving notification. If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department in the postage-paid envelope with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law requires that you forward this notice to your distributors and retail outlets within five working days. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Please see the reverse side of this notice for details. If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimler.com. For the Notice to U.S. Customers: If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to http://www.safercar.gov. For the Notice to Canadian Customers: If you wish to submit a complaint about this recall, you can contact Transport Canada road safety, 80 rue Noel, Gatineau, Quebec J8Z 0A1 or call (800) 333-0510. We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle safety. WARRANTY CAMPAIGNS DEPARTMENT Enclosure Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 4 Reimbursement to Customers for Repairs Performed Prior to Recall If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement. Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement. Please provide original or clear copies of all receipts, invoices, and repair orders that show: • The name and address of the person who paid for the repair • The Vehicle Identification Number (VIN) of the vehicle that was repaired • What problem occurred, what repair was done, when the repair was done • Who repaired the vehicle • The total cost of the repair expense that is being claimed • Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt) Reimbursement will be made by check from your Daimler Trucks North America LLC dealer. Please speak with your Daimler Trucks North America LLC authorized dealer concerning this matter. Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 5 Work Instructions Subject:FCCC Motorhome Valve StemStabilizers Models Affected: Specific model years 2017-2023 FCCC MBC, MC, MT55, S2C, S2G, S2RV, XBR, XBS, XCL, XCM, XCR, and XCS chassis manufactured February 20, 2017, through November 18, 2021, and equipped with a valve stem extension and stabilizer configured with a specific tire valve stem and wheel combination. Inner Wheel Valve Stem Extention and Stabilizer Removal and Valve Stem Cap Replacement 1. Inspect the base label (Form WAR259) for a campaign completion sticker for FL912 (Form WAR261). If a sticker is present for FL912, no work is needed. If there is no sticker, proceed with the steps below. 2. Remove and discard the rear inner wheel valve stem extensions. See Fig. 1. 3. Remove and discard the rear inner wheel valve stem extension stabilizers. See Fig. 1. 4. Install the valve stem cap MYI 21 534 on the rear inner wheel valve stems. See Fig. 2. 12/10/2021 f400447 1 2 1. Stabilizer 2. Inner Wheel Valve Stem Extension Fig. 1, Inner Wheel Valve Stem Extension and Stabilizer Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 6 5. Clean a spot on the base label (Form WAR259) and attach a campaign completion sticker for FL912 (Form WAR261) indicating this work has been completed. 01/07/2022 f400449 Fig. 2, Completed Work Daimler Trucks North America LLC Recall Campaign January 2022 FL912AB NHTSA #21V-921 Page 7
**************************************************************************************************************
IMPORTANT SAFETY RECALL This Notice Applies to Your Recreational Vehicle «vin» Name Address City, St. Zip Dear Valued Customer: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Freightliner Custom Chassis Corporation, and Jayco motorized division have decided that a defect, which relates to motor vehicle safety, exists on certain model year 2018-2023 Entegra Accolade, Accolade XL, Jayco Seneca, Seneca Prestige Class C motorhomes built with certain Freightliner model Years 2017 – 2023 FCCC MBC, MC, MT55, S2C, S2G, S2RV, XBR, XBS, XCL, XCM, XCR, and XCS chassis manufactured February 20, 2017, through November 18, 2021, and equipped with a valve stem extension and stabilizer configured with a specific tire valve stem and wheel combination. Certain chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. A loss of air pressure in the inner tire on a motorhome with a single drive axle may overload the outer tire and increase the risk of a crash. Repairs will be performed by Daimler Trucks North America authorized service facilities. The inner valve stem extension and stabilizer will be removed. The Recall will take approximately one hour and will be performed at no charge to you. Please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, search online at Daimler-TrucksNorthAmerica.com/contact-us/. Scroll down to “Locate a Dealer,” and select the appropriate brand. You may also confirm your vehicle’s involvement in this recall at this URL: https:// dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage. If you have paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement. Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following documentation must be presented to your dealer for consideration for reimbursement. Please provide original or clear copies of all receipts, invoices, and repair orders that show: 1. The name and address of the person who paid for the repair 2. The Vehicle Identification Number (VIN) of the repaired vehicle 3. What problem occurred, what repair was done, and the date of the repair 4. Who repaired the vehicle 5. The total cost of the claimed repair expense 6. Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt) Reimbursement will be made by check from your Daimler Trucks North America LLC dealer. Please speak with your authorized Daimler Trucks North America LLC dealer concerning this matter. If you do not own the vehicle that corresponds to the identification number(s), which appears on the Recall Notification, please return the notification to the Warranty Campaigns Department with any information you can furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that you forward this notice to the lessee within 10 days. If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712, 7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address DTNA.Warranty.Campaigns@Daimler.com. If you are not able to have the defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to http://www.safercar.gov. We certainly regret this inconvenience; however, your safety is our most important priority. Sincerely, Compliance Management Jayco Motorized Division Safety Recall: April 2022 Jayco Inc. 22V-121 Daimler Trucks 21V-921 (FL912) June 2020 Reason for this recall What we need you to do Recall Remedy
**************************************************************************************************************
IMPORTANT SAFETY RECALL This Notice Applies to Your Recreational Vehicle Name Address City, St. Zip Dear Valued Dealer: This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Daimler Trucks North America LLC (DTNA), on behalf of its wholly owned subsidiary, Freightliner Custom Chassis Corporation, and Jayco motorized division have decided that a defect, which relates to motor vehicle safety, exists on certain model year 2018-2023 Entegra Accolade, Accolade XL, Jayco Seneca, Seneca Prestige Class C motorhomes built with certain Freightliner model Years 2017 – 2023 FCCC MBC, MC, MT55, S2C, S2G, S2RV, XBR, XBS, XCL, XCM, XCR, and XCS chassis manufactured February 20, 2017, through November 18, 2021, and equipped with a valve stem extension and stabilizer configured with a specific tire valve stem and wheel combination. Certain chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. A loss of air pressure in the inner tire on a motorhome with a single drive axle may overload the outer tire and increase the risk of a crash. Repairs will be performed by Daimler Trucks North America authorized service facilities. The inner valve stem extension and stabilizer will be removed. The Recall will take approximately one hour and will be performed at no charge to you. Our records show the following unit is affected by this recall and is part of the current inventory at your dealership. VIN Please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and to ensure that parts are available at the dealership. To locate an authorized dealer, search online at Daimler-TrucksNorthAmerica.com/contact-us/. Scroll down to “Locate a Dealer,” and select the appropriate brand. You may also confirm your vehicle’s involvement in this recall at this URL: https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage. Federal law requires that all affected units in your inventory be repaired prior to delivery to a retail owner. If you sold an affected unit recently, please contact the owner immediately to advise the owner of the recall. In addition, please register the unit through Jayco Partners. A vehicle lessor receiving this notice must notify the lessee by first class mail within ten (10) days from receipt of this owner notification letter. Information regarding this recall is available in “Case Recall Attachments” in Jayco Partners. If you have questions about this recall please contact Warranty Campaigns Department at (800) 547-0712 or email DTNA.Warranty.Campaigns@Daimler.com you may also contact Jayco Inc. Customer Service Department at 800-283-8267. We certainly regret this inconvenience; however, our Customers’ safety is our most important priority. Sincerely, Compliance Management Jayco Motorized Division Safety Recall: April 2022 Jayco Inc. 22V-121 Daimler Trucks 21V-921 (FL912) Reason for this recall What we need you to do Recall Remedy
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-121 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Jayco, Inc. Submission Date : MAR 21, 2022 NHTSA Recall No. : 22V-121 Manufacturer Recall No. : FL912 21V-921 Manufacturer Information : Manufacturer Name : Jayco, Inc. Address : 903 South Main Street PO Box 460 Middlebury IN 46540 Company phone : 800-283-8267 Population : Number of potentially involved : 1,055 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2019-2022 JAYCO CLASS C MOTORHOME Seneca, Seneca Prestige, Accolade, Accolade XL Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : The recall population was determined by cross referencing the VINs provided by Daimler to Jayco’s production records. Production Dates : APR 16, 2019 – MAR 03, 2022 VIN Range 1 : Begin : 4UZADVFC0KCLS6188 End : 4UZADVFCXNCNS9383 ✔ Not sequential Description of Defect : Description of the Defect : Daimler Trucks North America, LLC (Daimler) reported to Jayco that certain incomplete vehicle chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A loss of air pressure in the inner tire may overload the outer tire and increase the risk of a crash. Description of the Cause : Daimler did not report the cause. Identification of Any Warning that can Occur : Operators may identify an audible rattling noise from the stem extension rubbing against the wheel opening while driving. Visual inspection during inspection or during maintenance may reveal stabilizer is dislocated, damage to the stem extension, or the rim, and low tire pressure of the inner tire. Part 573 Safety Recall Report 22V-121 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Involved Components : Component Name 1 : Outer Wheel Component Description : Outer Aluminum wheel Component Part Number : ACC40620 Component Name 2 : Inner Wheel Component Description : Inner steel wheel Component Part Number : ACC50487 or ACC51487 Component Name 3 : Extension Stabilizer Component Description : Rubber Valve Stem Extension Stabilizer Component Part Number : 13-10232-000 Component Name 4 : Valve Stem Extension Component Description : Inner Valve Stem Extension Component Part Number : 13-10026-000 Component Name 5 : Valve Stem Component Description : Inner Wheel Valve Stem Component Part Number : 13-10303-000 or 13-10027-000 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Part 573 Safety Recall Report 22V-121 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Chronology : 1/24/2022 A retail owner contacted Jayco Customer Service inquiring about a notification of a recall they received from Daimler for recall 21V-921. 1/28/22 Jayco Compliance contacted Daimler about the recall and they sent a list of affected VINs to Jayco. 1/31/2022 Warranty Incident Review Committee (WIRC) discussed this incident and elevated to the Corrective and Preventive Action Committee (CPAC). 2/2/2022 CPAC met to discuss this incident and elevated this incident to the Safety Steering Committee (SSC). On 2/24/2022 SSC met and voted that a safety recall was appropriate for this incident. Description of Remedy : Description of Remedy Program : The inner valve stem extension and stabilizer will be removed. Repairs will be performed by Daimler Trucks North America authorized service facilities. Repairs made prior to the recall will be reimbursed in accordance with our Recall Reimbursement Plan on file with NHTSA. Daimler trucks will be filing the completion rates with NHTSA for this recall. Daimler recall 21V-921. How Remedy Component Differs from Recalled Component : This was not reported by Daimler. Identify How/When Recall Condition was Corrected in Production : This was not reported by Daimler. Recall Schedule : Description of Recall Schedule : Jayco Inc. will send owner notifications to its dealers and affected retail owners before the 60 day deadline. Planned Dealer Notification Date : MAY 02, 2022 – MAY 02, 2022 Planned Owner Notification Date : MAY 02, 2022 – MAY 02, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-121 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Jayco, Inc. Submission Date : MAR 03, 2022 NHTSA Recall No. : 22V-121 Manufacturer Recall No. : FL912 21V-921 Manufacturer Information : Manufacturer Name : Jayco, Inc. Address : 903 South Main Street PO Box 460 Middlebury IN 46540 Company phone : 800-283-8267 Population : Number of potentially involved : 1,055 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2019-2022 JAYCO CLASS C MOTORHOME Seneca, Seneca Prestige, Accolade, Accolade XL Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : The recall population was determined by cross referencing the VINs provided by Daimler to Jayco’s production records. Production Dates : APR 16, 2019 – MAR 03, 2022 VIN Range 1 : Begin : 4UZADVFC0KCLS6188 End : 4UZADVFCXNCNS9383 ✔ Not sequential Description of Defect : Description of the Defect : Daimler Trucks North America, LLC (Daimler) reported to Jayco that certain incomplete vehicle chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A loss of air pressure in the inner tire may overload the outer tire and increase the risk of a crash. Description of the Cause : Daimler did not report the cause. Identification of Any Warning that can Occur : Operators may identify an audible rattling noise from the stem extension rubbing against the wheel opening while driving. Visual inspection during inspection or during maintenance may reveal stabilizer is dislocated, damage to the stem extension, or the rim, and low tire pressure of the inner tire. Part 573 Safety Recall Report 22V-121 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Involved Components : Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : 1/24/2022 A retail owner contacted Jayco Customer Service inquiring about a notification of a recall they received from Daimler for recall 21V-921. 1/28/22 Jayco Compliance contacted Daimler about the recall and they sent a list of affected VINs to Jayco. 1/31/2022 Warranty Incident Review Committee (WIRC) discussed this incident and elevated to the Corrective and Preventive Action Committee (CPAC). 2/2/2022 CPAC met to discuss this incident and elevated this incident to the Safety Steering Committee (SSC). On 2/24/2022 SSC met and voted that a safety recall was appropriate for this incident. Description of Remedy : Description of Remedy Program : The inner valve stem extension and stabilizer will be removed. Repairs will be performed by Daimler Trucks North America authorized service facilities. Repairs made prior to the recall will be reimbursed in accordance with our Recall Reimbursement Plan on file with NHTSA. Daimler trucks will be filing the completion rates with NHTSA for this recall. Daimler recall 21V-921. How Remedy Component Differs from Recalled Component : This was not reported by Daimler. Identify How/When Recall Condition was Corrected in Production : This was not reported by Daimler. Part 573 Safety Recall Report 22V-121 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : MAY 02, 2022 – MAY 02, 2022 Planned Owner Notification Date : MAY 02, 2022 – MAY 02, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-121 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Jayco, Inc. Submission Date : APR 14, 2022 NHTSA Recall No. : 22V-121 Manufacturer Recall No. : FL912 21V-921 Manufacturer Information : Manufacturer Name : Jayco, Inc. Address : 903 South Main Street PO Box 460 Middlebury IN 46540 Company phone : 800-283-8267 Population : Number of potentially involved : 2,643 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2018-2023 JAYCO CLASS C MOTORHOME Seneca, Seneca Prestige, Accolade, Accolade XL Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : The recall population was determined by cross referencing the VINs provided by Daimler to Jayco’s production records. Production Dates : AUG 11, 2017 – APR 11, 2022 VIN Range 1 : Begin : 4UZADVFC0JCJR6086 End : 4UZADVFCXNCNS9383 ✔ Not sequential Description of Defect : Description of the Defect : Daimler Trucks North America, LLC (Daimler) reported to Jayco that certain incomplete vehicle chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A loss of air pressure in the inner tire may overload the outer tire and increase the risk of a crash. Description of the Cause : Daimler did not report the cause. Identification of Any Warning that can Occur : Operators may identify an audible rattling noise from the stem extension rubbing against the wheel opening while driving. Visual inspection during inspection or during maintenance may reveal stabilizer is dislocated, damage to the stem extension, or the rim, and low tire pressure of the inner tire. Part 573 Safety Recall Report 22V-121 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Involved Components : Component Name 1 : Outer Wheel Component Description : Outer Aluminum wheel Component Part Number : ACC40620 Component Name 2 : Inner Wheel Component Description : Inner steel wheel Component Part Number : ACC50487 or ACC51487 Component Name 3 : Extension Stabilizer Component Description : Rubber Valve Stem Extension Stabilizer Component Part Number : 13-10232-000 Component Name 4 : Valve Stem Extension Component Description : Inner Valve Stem Extension Component Part Number : 13-10026-000 Component Name 5 : Valve Stem Component Description : Inner Wheel Valve Stem Component Part Number : 13-10303-000 or 13-10027-000 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Part 573 Safety Recall Report 22V-121 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Chronology : 1/24/2022 A retail owner contacted Jayco Customer Service inquiring about a notification of a recall they received from Daimler for recall 21V-921. 1/28/22 Jayco Compliance contacted Daimler about the recall and they sent a list of affected VINs to Jayco. 1/31/2022 Warranty Incident Review Committee (WIRC) discussed this incident and elevated to the Corrective and Preventive Action Committee (CPAC). 2/2/2022 CPAC met to discuss this incident and elevated this incident to the Safety Steering Committee (SSC). On 2/24/2022 SSC met and voted that a safety recall was appropriate for this incident. Description of Remedy : Description of Remedy Program : The inner valve stem extension and stabilizer will be removed. Repairs will be performed by Daimler Trucks North America authorized service facilities. Repairs made prior to the recall will be reimbursed in accordance with our Recall Reimbursement Plan on file with NHTSA. Daimler trucks will be filing the completion rates with NHTSA for this recall. Daimler recall 21V-921. How Remedy Component Differs from Recalled Component : This was not reported by Daimler. Identify How/When Recall Condition was Corrected in Production : This was not reported by Daimler. Recall Schedule : Description of Recall Schedule : Jayco Inc. will send owner notifications to its dealers and affected retail owners before the 60 day deadline. Planned Dealer Notification Date : MAY 02, 2022 – MAY 02, 2022 Planned Owner Notification Date : MAY 02, 2022 – MAY 02, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-121 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Jayco, Inc. Submission Date : MAR 08, 2022 NHTSA Recall No. : 22V-121 Manufacturer Recall No. : FL912 21V-921 Manufacturer Information : Manufacturer Name : Jayco, Inc. Address : 903 South Main Street PO Box 460 Middlebury IN 46540 Company phone : 800-283-8267 Population : Number of potentially involved : 1,055 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2019-2022 JAYCO CLASS C MOTORHOME Seneca, Seneca Prestige, Accolade, Accolade XL Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : The recall population was determined by cross referencing the VINs provided by Daimler to Jayco’s production records. Production Dates : APR 16, 2019 – MAR 03, 2022 VIN Range 1 : Begin : 4UZADVFC0KCLS6188 End : 4UZADVFCXNCNS9383 ✔ Not sequential Description of Defect : Description of the Defect : Daimler Trucks North America, LLC (Daimler) reported to Jayco that certain incomplete vehicle chassis may have been built with the tire valve stem extension for the inner wheel contacting the outer wheel rim opening, potentially damaging the valve stem resulting in a loss of air pressure in the inner tire. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A loss of air pressure in the inner tire may overload the outer tire and increase the risk of a crash. Description of the Cause : Daimler did not report the cause. Identification of Any Warning that can Occur : Operators may identify an audible rattling noise from the stem extension rubbing against the wheel opening while driving. Visual inspection during inspection or during maintenance may reveal stabilizer is dislocated, damage to the stem extension, or the rim, and low tire pressure of the inner tire. Part 573 Safety Recall Report 22V-121 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Involved Components : Component Name 1 : Outer Wheel Component Description : Outer Aluminum wheel Component Part Number : ACC40620 Component Name 2 : Inner Wheel Component Description : Inner steel wheel Component Part Number : ACC50487 or ACC51487 Component Name 3 : Extension Stabilizer Component Description : Rubber Valve Stem Extension Stabilizer Component Part Number : 13-10232-000 Component Name 4 : Valve Stem Extension Component Description : Inner Valve Stem Extension Component Part Number : 13-10026-000 Component Name 5 : Valve Stem Component Description : Inner Wheel Valve Stem Component Part Number : 13-10303-000 or 13-10027-000 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Part 573 Safety Recall Report 22V-121 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Chronology : 1/24/2022 A retail owner contacted Jayco Customer Service inquiring about a notification of a recall they received from Daimler for recall 21V-921. 1/28/22 Jayco Compliance contacted Daimler about the recall and they sent a list of affected VINs to Jayco. 1/31/2022 Warranty Incident Review Committee (WIRC) discussed this incident and elevated to the Corrective and Preventive Action Committee (CPAC). 2/2/2022 CPAC met to discuss this incident and elevated this incident to the Safety Steering Committee (SSC). On 2/24/2022 SSC met and voted that a safety recall was appropriate for this incident. Description of Remedy : Description of Remedy Program : The inner valve stem extension and stabilizer will be removed. Repairs will be performed by Daimler Trucks North America authorized service facilities. Repairs made prior to the recall will be reimbursed in accordance with our Recall Reimbursement Plan on file with NHTSA. Daimler trucks will be filing the completion rates with NHTSA for this recall. Daimler recall 21V-921. How Remedy Component Differs from Recalled Component : This was not reported by Daimler. Identify How/When Recall Condition was Corrected in Production : This was not reported by Daimler. Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : MAY 02, 2022 – MAY 02, 2022 Planned Owner Notification Date : MAY 02, 2022 – MAY 02, 2022 * NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END