“This site contains affiliate links for which OEMDTC may be compensated” |
December 13, 2021 NHTSA CAMPAIGN NUMBER: 21V965000
Fuel Tubes May Crack and Leak Fuel
A high pressure fuel leak in the presence of an ignition source can increase the risk of a fire.
NHTSA Campaign Number: 21V965
Manufacturer Daimler Trucks North America, LLC
Components FUEL SYSTEM, DIESEL
Potential Number of Units Affected 2,843
Summary
Daimler Trucks North America, LLC (DTNA) is recalling certain 2020-2022 Western Star 4700, 2019-2022 Freightliner 114SD, 2021-2022 Western Star 49X, Freightliner Cascadia P4, 2022 Western Star 47X, 2021 Western Star WF110, 2020 Western Star WJ121, and 2019-2021 FCCC XCP Chassis vehicles. The fuel tubes between the fuel rail and the injectors for cylinders four, five, and six may fatigue and crack, which can result in a high pressure fuel leak.
Remedy
Dealers will replace the fuel tubes, and install vibration isolators, free of charge. Owner notification letters were mailed January 28, 2022. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL-915.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check for Daimler Trucks North America Recalls
Chronology :
Cummins states per NHTSA 21E-099, “As part of the investigation, Cummins identified 29 warranty claims for fuel tube fuel leaks (not all of which had cracked tubes) with a date range of March 6, 2020 through September 22, 2021 (as of September 22, 2021).19Oct2021 – Cummins investigated a September 2021 fire on a vehicle equipped with an X12 engine. 25Oct2021 – Cummins identified a leak of the #5 cylinder fuel tube as the cause of the fire.28Oct2023 – Cummins completed a Product Safety Hazard Analysis.” Cummins notified DTNA on December 2, 2021. DTNA investigated the matter and promptly declared a recall.
21E099 – Fuel Tubes May Crack and Leak Fuel – Cummins X12
17 Affected Products
Vehicles
MAKE | MODEL | YEAR |
FCCC | XCP | 2019-2021 |
FREIGHTLINER | 114SD | 2019-2022 |
FREIGHTLINER | CASCADIA | 2021-2022 |
WESTERN STAR | 4700 | 2020-2022 |
WESTERN STAR | 47X | 2022 |
WESTERN STAR | 49X | 2021-2022 |
WESTERN STAR | WF110 | 2021 |
WESTERN STAR | WJ121 | 2020 |
11 Associated Documents
Manufacturer Notices(to Dealers,etc)
RCMN-21V965-2198.pdf 288.943KB
Miscellaneous Document
RMISC-21V965-0947.pdf 857.659KB
Defect Notice 573 Report
RCLRPT-21V965-3009.PDF 217.622KB
Recall Acknowledgement
RCAK-21V965-8054.pdf 645.989KB
Manufacturer Notices(to Dealers,etc)
ISSUED Interim Owner Notification Letter(Part 577)
RIONL-21V965-1874.pdf 164.897KB
Manufacturer Notices(to Dealers,etc)
RCMN-21V965-5551.pdf 412.143KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V965-6998.pdf 135.702KB
Recall Quarterly Report #1, 2022-1
RCLQRT-21V965-6340.PDF 211.139KB
Recall Quarterly Report #2, 2022-2
RCLQRT-21V965-4119.PDF 211.241KB
Recall Quarterly Report #3, 2022-3
RCLQRT-21V965-4737.PDF 211.328KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V965&docType=RCL
- 🍇➤Please Note: 1. The HD OBD option is available for heavy truck owners and the OBD/EOBD option is available for other vehicle. 2. Owners need to fix the problem with the truck first before they need clear the error code.
- 🍉➤【Support Full Systems for Heavy Duty Truck】 NL102 PLUS supports read and clear DTC, live data, ECU information for truck all systems. Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more, which are in compliance with J1939, J1708 and J1587 protocols, It includes almost American HD trucks(Class4-Class8), it is recommended that customers confirm before purchase that if they comply with the years and agreements supported by NL102P before purchasing.
- 🍋➤【Professional DPF Regeneration Tool】Force DPF Regen work on Cummings, Detroit, Maxxforce, ISUZU, HINO engine,It covers almost all US trucks, supported advanced features: DPF Regeneration,D-O-C Cleaning Procedures, DPF Regeneration in Parking, DPF Regeneration in Driving, DPF Onboard. NL102P's tool helps you re-awaken the engine power When the diesel p-articulates of the engine accumulate. It will save $800-$2500 for truck owners a year.
- 🍊➤【Excellent Oil Light Reset】NL102 PLUS support Oil service reset work on Cummings, Detroit, Maxxforce engine. when the replacement of engine oil is done, the truck system calculates when to change the engine oil and filter based on vehicle use. An oil change is required whenever indicated by the display, otherwise it will affect the engine maintenance and life. The NL102P truck scanner offers help to reset the Oil Life Reminder (Determine the Oil Service Light), ensure your driving safety.
- 🍐➤【All OBD/EOBD Diagnosis】NL102 PLUS supports both all 12V and all 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. NL102 PLUS can read and earse the trouble codes, determine the MIL (check your Truck engine) and I/M Readiness, Freeze Frame, Live Data, O-xygen Sensor Test, On-Board Monitor, Vehicle Identification Info. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair. In order to ensure that you can use the NL102P, please check the manual before purchasing.
- 🔥2024 TOP INTELLIGENT DIAGNOSTIC SCANNER FOR SEMI COMMERCIAL: ANCEL V5 HD obd2 scanner is specifically designed for 12V & 24V semi trucks,pickup trucks,heavy-duty trucks and 99% of commercial vehicles.you will enjoy✅All System Diagnostic;✅40+ Special Functions;✅ Full Bi-directional Test; ✅Advanced ECU Coding;✅Exclusive Remote Diagnosis Assistance;✅Full System Diagnostic ;✅Wider Vehicle Coverage;✅ Full HD OBD /OBDII /EOBD Modes;✅Top-level Hardware;✅>2 Yrs Free Update,Lifetime Tech Support
- 🚚40+ Resets with ABS SRS DPF Regen: ANCEL V5 HD includes 40+ resets for various systems, including ABS, SRS, DPF, EPB, BMS,DPF Regen, Injector Coding,Parameter Setting,Idle Speed Adjustment, Speed Limit Adjustment and more to fully meet your various needs. These resets can help reset the vehicle's systems to their default settings, eliminating any error codes or malfunctions that may be causing problems.Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛FULL BI-DIRECTIONAL CONTROL, GET YOU TO MALFUNCTIONS DIRECTLY:ANCEL V5 HD bidirectional scan tool supports bidirectional testing, which means it can both read and erase fault codes from the vehicle's ECUs.This feature saves time and money by eliminating the need for multiple scanners or tools.you can quickly identify whether the repair job works or not:Aftertreatment Test, Injector Test,Fuel Pump Test,Cylinder Test,Enigne State Monitor,A/C Compressor Test,Heated Oxygen Sensor Test and more.
- 🚜ADVANCED ECU CODING & PROGRAMMING:ANCEL V5 HD diesel truck scan tool comes with a powerful ECU programming and coding function, allowing you to reprogramme and decode the electronic control units (ECUs) of the vehicle.This feature is especially useful for technicians who need to update software,adjust parameters,or perform other modifications to the vehicle's electronic systems.🚦Note: ECU Coding is not universal to all cars, please check compatibility with VIN before order.
- 🚌OE-Level Full System Diagnostic:ANCEL V5 HD code reader is a professional-grade truck scanner that covers almost all the systems in semi-commercial vehicles, including engine, transmission, ABS, SRS, airbag,instrument panel, etc.It provides accurate and comprehensive diagnostic results,helping you quickly identify and solve vehicle problems,which are in compliance with J1939, 1708,ISO14230,ISO15765,ISO9141,ISO11898,E-J1850 VPW,SAE-J1850 PWM,J1587,CAN TP16,CAN TP20,AN-FD,and DOIP protocols.
- 🔥🔥🔥2024 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD heavy duty truck scan tool 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>40+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
- 🚛Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch diesel truck scan tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
- 🚛40+ Reset Functions & Bidirectional Control - 2024 newest top truck scanner diagnostic tool, comes with 40+ special services (ECU, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel scanner diagnostic tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
- 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD truck scanner not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions.
- 🔎【Comprehensive Full Systems Diagnostic Tool For Truck】Launch Heavy Duty Truck Diagnostic Tool offers OE-Level diagnosis for all systems of heavy truck/Pickups/Bus/Van in compliance with OBD-II Communication Modes 1-10 and J1587, J1708 and J1939 protocols,Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more.
- 🔥【All OBD/EOBD Diagnosis】This truck scanner diagnostic tool supports both most 12V and 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. Our truck scan tool can read codes, erase codes, I/M Readiness, Live data, EVAP Test. . . etc for obd2/eobd cars. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair.
- 🚚【Wide Truck Applications】Heavy duty truck scan tool covers almost J1587, J1708 and J1939 protocols heavy duty trucks and OBD II vehicles. Such as Cummins, Paccar, Detroit, Perkins, International, Peterbilt, Allison, Eaton, Ford duty trucks and so on, Covers class 4 (14,001 lbs) through class 8 (33,000 lbs and over) heavy duty trucks. One that meets all the requirements! NOTE:Compatibility will vary on vehicles model and year, please send V-IN to check the compatibility before purchase.
- 💡【Friendly Design, Easy of Use】This heavy duty diagnostic scan tool is plug and play, simple and convenient, The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- ✨【3 YEARS WARRANTY & FREE LIFETIME UPDATES】The diesel truck scanner is exclusively designed for US truck. it's come With a full service functions and full systems and provides 24/7 technical support, 3 years warranty, 90-days free return for refund or replacement. This diesel scan tool is suitable for auto repair shops and technicians.No subscription fee and free lifetime updates.
- Powerful and Cost-Effective - An essential heavy duty truck scanner designed for heavy duty truck owner-operators and small commercial fleets. With the Diesel Decoder, just plug the diesel scan tool into the diagnostic port and pair with the free smartphone app to access in-depth HD diagnostic information.
- Swift and Adaptable - This heavy duty truck scanner recognizes both diagnostic trouble codes (DTCs) and brand-specific error codes for prevalent heavy-duty truck brands in North America, such as Freightliner, Peterbilt, Mack, Kenworth, Volvo, Western Star, among others and give the ability to perform DPF regens on select model years of Cummins, International, Detroit, Isuzu, Paccar, Mercedes, Hino and Mack/Volvo.
- Instant Repair Help - The diesel scan tool seamlessly connects to the Diesel Laptops comprehensive Diesel Repair Platform library so you can immediately start diagnosing and repairing any problems and get back on the road as soon as possible.
- Continuous Enhancement - Benefit from direct feature additions and updates via the app, our heavy duty truck scanner will continue to have functionality added over time. This removes the hassle of lengthy update processes and the financial strain of renewing costly diagnostic gear.
- 🌟【Run Your DPF Cleaner, Longer -Renew, Don't Replace!】Safeguard your truck from breakdowns and and high repair costs with focused DPF care. Opt for HD3400, featuring DPF regen, reset, DPR state control, and more, tailored for engines like Cummins, Detroit, Caterpillar, etc. Imagine this: easy and cost-effective DPF regen saving you from potential $10,000 to $30,000 in repairs. Unlock compliance-free operation for improved fuel efficiency, extended engine life, and significant cost savings
- 🚜【Maximize Caterpillar Engine Trucks' Potential!】HD3400 Plus diesel scanner, exclusively for Caterpillar engines (C7, C9, C11, C13, C15, C32, and more) commonly found in trucks like Caterpillar, Ford Pick-up, Freightliner, Peterbilt, Kenworth. Features include code reading/clearing, live data streaming, ECU retrieval, DPF regeneration and more. Unleash your Caterpillar engine's power!
- 🚛【Designed for Detroit Engine Trucks】ANCEL HD3400 heavy duty truck scan tool is compatible with a wide range of heavy duty commercial trucks – class 7 and class 8, medium duty trucks, light duty trucks and semi-trucks equipped with Detroit engines, including DD13, DD15, DD16, Series 50, Series 60, MBE 900, MBE 4000, OM501, OM502, DDDL 6, and DDDL 7.
- 🚐【Designed for Paccar Engine Trucks】ANCEL HD3400 heavy-duty truck scanner diagnostic tool is specifically designed for Paccar engines, including Paccar PX-7, PX-9, MX-11, MX-13. ❗Note: PACCAR engines post-2016 require a CAN-3 adapter for forced DPF regeneration. If you want to perform DPF regen for your PACCAR engines manufactured after 2016, please find us to get the additional CAN-3 adapter.
- 🌟【Unlock Advanced DPF Regeneration】Our diesel scanner diagnostic tool excels in DPF reset, providing active/forced regeneration and advanced DPF state control. Save time and money on DPF maintenance, making it the top choice for truck diagnostics. Elevate your DPF maintenance with our advanced features!
- 【Extensive Compatibility】After the upgrade, the compatibility is wider and more accurate! HD601 PRO heavy duty truck scanner supports all major truck models that comply with standard protocols (SAE J1939, SAE J1708, ISO 14230-4, ISO 15764-4 and ISO 9141-2, ISO 27145-4 and Euro6). Such as Cummins, Paccar, Detroit, Perkins, Freightliner, International, Peterbilt, Ford, Class 4-Class 8 trucks, etc. It also check engine diagnosis on most cars, minivans and light trucks from 1996 and latest.
- 【OE-Level Full System Diagnostic】HD601 PRO Diesel Scanner supports all system scans of heavy trucks compliant with standard protocols SAE J1939 & J1708, such as Engine, ABS, Transmission, Braking System, ESP, EPS, Fuel System, etc, It is a great scan tool for Cummins, Caterpillar, Detroit, Perkins, Maxxforce, BendixWabash, Wabaco, Haldex, Allison, Eaton heavy trucks, With this truck tool, you can get deep analysis data about the system and do some repairs by yourself, saving much time and money.
- 【Enhanced Diesel OBD Scanner】As a 2-in-1 code reader, it supports the latest ISO27145 and Euro6 protocols and enables diagnosis of car and truck engines. In addition to reading codes, clearing codes and displaying live data in a text or graphic format for trucks, you can also retrieve vehicle information, view freeze frames and look up DTCs. To ensure that this device works with different engines, it is also equipped with 6, 9 and 16 pin cables that allow you to easily turn off the CEL light.
- 【DTC Library】+【Life Time Free Update】The built-in DTC library allows you to retrieve the codes directly without searching for the definition in the book. Whether you are a professional mechanic or a DIY car owner, HD601 diesel scanner explains the existing problem, makes it easier for you to understand the codes definition and fix the problem faster. Plus, you get a lifetime free internet updates, so you always have the latest software for diagnostics in English and Spanish languages.
- 【Friendly Design, Easy of Use】This scanner is plug and play, simple and convenient, and very friendly for beginners. With improved buttons for easy menu navigation. The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- 【2024 NEWEST LAUNCH 1st Advanced Scan Tool Compatible With 12V&24V Vehicles】Design for Passenger&Commercial Vehicles 2 in1,work for Cars/Trucks/buses/trailers/excavators/diesel engine/pick-up/etc.
- 【J2534 Reprogramming with Smartlink C】Advanced OEM J2534 reprogramming,Helps access direct data online, replace existing software/firmware in ECU,program new ECUs and fix software-controlled issue.
- 【Over 60 Service Reset Functions + Bi-Directional + ECU Coding 】This scan tool can support ECU Coding,60+ reset service functions like SAS/EPB/TPMS/DPF/Oil/Brake/ABS Bleed, Injector coding, etc.
- 【2024 BEST Advanced Hardware & All Systems Diagnosis+Topology Display 】Support All systems Diagnostic including ENG, AT, ECM, TCM, ABS, SRS, BCM, BMS, TPMS, SAS, Fuel System, Light System and more.
- 【Wider Vehicle Coverage of 12V & 24V Vehicles + 24 Languages】LAUNCH X431 PRO3S+SMARTLINK HD automotive scanner is ALL-IN-ONE Scan Tool for 12V cars and 24V Heavy-duty trucks support CANFD & DOIP.
- 【Full Systems Heavy Duty Scanner Tool】:this heavy duty scanner tool supports Read DTC and Clear DTC, Live Data,Engine Check, Transmission, Drivetrain, Suspension, Cluster, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more, which are in compliance with J1939, J1708 and J1587 protocols,
- 【OBD2/HDOBD/EOBD All Diagnosis】: supports both all 12V and all 24V truck, with 6 pin and 9 pin adapters for different interfaces.It support reading code, earsing trouble codes, Live Data, determine the MIL (check your Truck engine) and I/M Readiness, Freeze Frame, O2 Sensor Test, On-board Monitor, Vehicle Identification Info.It can lookup DTC, translates the related code's meaning to help you know what's wrong with the car.
- 【Suitable for Most Trucks】:diesel diagnostic scanner support all truck standard protocols SAEJ1939/ J1587/ J1708,it work on heavy duty trucks/ light truck/ mini vans/ buses/ pickups from1996 to now.
- 【CANBUS System】:Detect the CANBUS node, and easily find out the wrong modoles and lines.
- 【Professional Automotive Scanner Diagnostic Tools】:Designed specifically for HDOBD/OBD2/EOBD.This HD10 covers all the functions of HDOBD,OBD2,and EOBD. What is more important is that it provide the results correctly and quickly, and you can read the results with graghs, which make you easier to read.
- 👍【2024 Newest wide Coverage for Heavy truck】: With support for standard HD OBD protocols and customized protocols, ANCEL HD3400 PRO provides 98% coverage for heavy truck models in the US market, including those with Cummins, Detroit, Caterpillar, Paccar engines,and trucks like Ford, Autocar, western star, Freightliner, Kenworth, Peterbilt, caterpillar,Terex, Thomas, Sany, Komatsu, Agrifac , Isuzu, Fuso, Hino,Volvo and more.
- 🚛【Available for Cummins 】ANCEL HD3400 Pro is specifically designed to support a wide range of Cummins engines found in trucks like Ford, Volvo, Freightliner, Kenworth, and more, as well as Sany machinery, Agrifac vehicles, RVs, and more. Compatible with ISX, ISM, ISN, QSB, X12, ISB, ISC, ISD, ISG, ISK, ISL, X15, B6.7, L9, L9N, QSM11, and other popular models.
- 🚒【Available for Caterpillar】exclusively designed for Caterpillar engines (C7, C9, C11, C13, C15, C32, and more), you can perform top-notch diagnostics to keep your trucks running reliably. Compatible with popular truck models like Kenworth, Peterbilt, Freightliner, International, Mack, and Volvo.
- 🚛【Available for Paccar&Detroit】ANCEL HD3400 PRO is compatible with a wide range of engine types, including Detroit engines (Series 50, Series 55, Series 60, OM501, OM502, DD5, DD13, DD15, DD16,MBE 900, MBE 4000, DD8, DDDL 6, DDDL 7, CPC2, CPC02T, CPC04T, CPC302T and More) and Paccar engines(PX-7, PX-9, MX-11, MX-13 and more). like medium-duty or light-duty trucks, or even semi-trucks
- 🚒【Superb Lifetime Free Update,Best Bang For The Buck】ANCEL HD3400 PRO diesel code reader allow our customers get the latest version with free update via WIFI,With Lifetime Free Update,HD3400 PRO is way more valuable by comparing with the other OBD diagnosis,which can save hundreds of dollar for our customers!
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 21V-964 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Seagrave Fire Apparatus, LLC Submission Date : APR 25, 2022 NHTSA Recall No. : 21V-964 Manufacturer Recall No. : C2532 Manufacturer Information : Manufacturer Name : Seagrave Fire Apparatus, LLC Address : 105 East 12th Street Clintonville WI 54929 Company phone : 715-823-2141 Population : Number of potentially involved : 174 Estimated percentage with defect : 25 % Vehicle Information : Vehicle 1 : 2019-2021 Seagrave Marauder / Attacker / Capitol Vehicle Type : Body Style : Power Train : NR Descriptive Information : These engines are equipped with High Pressure Common Rail fuel systems and sold for installation in mixer, truck, coach, emergency vehicle, refuse truck, recreational vehicle and crane applications. The recall consists of the entire population of engines equipped with a certain Injector Fuel Supply Tube (fuel tube) prior to the implementation of corrective action. Production Dates : AUG 27, 2021 – NOV 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The fuel tubes between the fuel rail and the injector for cylinders 4,5 and 6 may be susceptible to cracking, resulting in a high pressure fuel leak. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A high pressure fuel leak in the presence of an ignition source may increase the risk of a fire. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 21V-964 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Injector Fuel Supply Tube Component Description : Fuel tube between fuel rail and fuel injector Component Part Number : 5536516 Component Name 2 : Injector Fuel Supply Tube Component Description : Fuel tube between fuel rail and fuel injector Component Part Number : 5486389 Component Name 3 : Injector Fuel Supply Tube Component Description : Fuel tube between fuel rail and fuel injector Component Part Number : 3695190 Supplier Identification : Component Manufacturer Name : Usui International Corporation Address : 44780 Helm Street Plymouth Michigan 48170 Country : United States Chronology : On December 6, 2021 Cummins contacted Seagrave Fire Apparatus with the following information about this Recall… 19Apr2021-Cummings received a Technical Service Request for a leaking fuel tube on an X12 engine. 19Apr-23Jul2021-Cummins received additional reports of leaking fuel tubes on X12 engines and escalated the issue for further investigation. 23Jul2021-Cummins initiated a Product Problem Solving (PPS) project to investigate the case of the fuel tube leaks. Aug-Oct2021-Cummins continued to investigate this issue, including obtaining and analyzing parts from the field, conducting testing to understand the cause of the failures and evaluating potential corrective action. As part of the investigation, Cummins identified 29 warranty claims for fuel tube fuel leaks (not all of which had cracked tubes) with a date range of March 6, 2020 through September 22, 2021 (as of September 22, 2021). 19Oct2021-Cummins investigated a September 2021 fire on a vehicle equipped with an X12 engine. 25Oct2021-Cummins identified a leak of the #5 cylinder fuel tube as the cause of the fire. 28Oct2021-Cummins completed a Product Safety Hazard Analysis. 1Nov-23Nov2021-Cummins escalated the issue through its Product Safety Defect Board process. 23Nov2021-Based upon the results of the investigation, the Cummins Product Safety Defect Board decided to conduct a safety campaign to address this Part 573 Safety Recall Report 21V-964 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 condition. To date, there have been no reports of injuries due to this condition. Description of Remedy : Description of Remedy Program : Per Cummins: For engines having 75 miles or less, the remedy will consist of adding vibration isolators to the fuel tubes; fuel tubes do not need to be replaced. For all other engines, the subject fuel tubes for cylinders 4,5 and 6 (the rear half of the engine) will be replaced with new fuel tubes (having the same part number as the recalled components) and vibration isolators will be added to the fuel tubes to engines. A recall-specific reimbursement plan will be provided on the Recall Portal for those units not covered by the manufacturer’s limited warranty. How Remedy Component Differs from Recalled Component : Per Cummins: The replacement fuel tubes will also have vibration isolators. The fuel tube and vibration isolator combination will have a new part number. Identify How/When Recall Condition was Corrected in Production : Per Cummins: The injector alignment to the cylinder head was improved by implementing an improved alignment fixture during engine assembly and vibration isolators were added to the fuel tubes during engine assembly on November 2, 2021. Recall Schedule : Description of Recall Schedule : Per Cummins: Cummins expects to notify affected OEMs no later than December 10, 2021. Cummins will conduct the recall and notify owners. The timing of owner notification will be determined in consultation with the affected OEMs and subject to availability of addresses from the affected OEMs. The recall schedule is being developed. Seagrave did not send any dealer notifications for this as Cummins did all notifications and sent Seagrave the customer notification which was submitted to this 573 report. Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR * NR – Not Reported
**************************************************************************************************************
Cummins Inc. Box 3005 Columbus, IN 47202 – 3005 USA Mail Code: 40911 Phone: 1 800 CUMMINS care.cummins.com U.S. Customer XXXX Street Address City, ST 12345-6789 X12 Engines for NHTSA Recall 21E-099: Engine Serial Number Vehicle Model Vehicle Identification Number (VIN) Cummins Inc. Box 3005 Columbus, IN 47202 – 3005 USA Mail Code: 40911 Phone: 1 800 CUMMINS care.cummins.com *** IMPORTANT SAFETY RECALL*** NHTSA Recall No. 21E-099 Cummins Campaign #C2532 INTERIM RECALL NOTIFICATION Month Day, Year Dear Cummins Customer: This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Cummins Inc. has decided that a defect which relates to motor vehicle safety exists in certain Cummins X12 Engines that were manufactured between April 26, 2016 and November 1, 2021 and for installation in mixer, truck, coach, emergency vehicle, refuse truck, recreational vehicle and crane applications. This notice applies to the engines(s)/vehicles(s) listed on the enclosed table. WHAT IS THE PROBLEM? The fuel tubes between the fuel rail and the injectors for cylinders 4, 5 and 6 may be susceptible to cracking, resulting in a high pressure fuel leak. A high pressure fuel leak in the presence of an ignition source may increase the risk of a fire. WHAT ARE WE DOING ABOUT THE PROBLEM? Cummins is currently developing the permanent remedy for this issue. You will receive a second notification to inform you when the final remedy is available and to provide instructions to schedule the recall for your engine. WHAT SHOULD YOU DO? In the meantime, Cummins advises you to periodically check the injector fuel tubes for signs of leaking and to seek repairs if leaks are identified. If a leak occurs, the operator may smell diesel fuel or observe a mist. WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS? If you have questions or concerns about this recall, please contact your local Cummins Distributor or authorized warranty dealer. You may also contact Cummins Care at 1-800- CUMMINS (1-800-286-6467), or visit our website at care.cummins.com. Cummins Inc. Box 3005 Columbus, IN 47202 – 3005 USA Mail Code: 40911 Phone: 1 800 CUMMINS care.cummins.com If you have a complaint relative to this recall, you may report it to the following: Administrator National Highway Traffic Safety Administration 1200 New Jersey Avenue, SE Washington, DC 20590 You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. If you have not registered your Cummins product, please complete the enclosed registration card or register your product at https://prodreg.cummins.com/prodreg/#/webform/contactInfo. If you are no longer the owner of the engines(s) listed on the enclosed table, please forward this notice to the new owner or provide the new owner’s contact information to Cummins so that we can notify them of this recall. Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days. Also, it is a violation of Federal law for a dealer to deliver a new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied. Cummins is taking this action in the interest of your safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter. Sincerely, Campaign Administrator Cummins Inc.
**************************************************************************************************************
C. March 11 , 2022 *** IMPORTANT SAFETY RECALL*** NHTSA Recall No. 21 E-099 Cummins Campaign #C2532 I• 11II11111111 1I1 111111 1•1 11111111 I• 1111 111 I I I I 11 I I, I 11 I I I I 11 I, I, X12 Engines for NHTSA Recall 21 E-099: Engine Serial Number Vehicle Model Vehicle Identification Number (VIN) —-1£:——-11—r———,1:— Cummins Inc. Box 3005 Columbus, IN 47202-3005 USA Mail Code: 40911 Phone 1 800 CUMMINS care.cummins.com Cummins Inc. Box 3005 Columbus, IN 47202 – 3005 USA Mail Code: 40911 Phone: 1 800 CUMMINS care cummins.com *** IMPORTANT SAFETY RECALL*** NHTSA Recall No. 21E-099 Cummins Campaign #C2532 March 11, 2022 Dear Cummins Customer: This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Cummins Inc. has decided that a defect which relates to motor vehicle safety exists in certain Cummins X12 Engines that were manufactured between April 26, 2016 and November 1, 2021 and for installation in mixer, truck, coach, emergency vehicle, refuse truck, recreational vehicle and crane applications. This notice applies to the engines(s)/vehicles(s) listed on the enclosed table. You previously received a letter informing you of this recall and advising you that Cummins was developing a remedy. A remedy is now available for your engine/vehicle. WHAT IS THE PROBLEM? The fuel tubes between the fuel rail and the injectors for cylinders 4, 5 and 6 may be susceptible to cracking, resulting in a high pressure fuel leak. A high pressure fuel leak in the presence of an ignition source may increase the risk of a fire. WHAT ARE WE DOING ABOUT THE PROBLEM? Cummins has released field Safety Campaign #C2532, X12 CM2350 X119B and X12 CM2450 X137B Fuel Injector Supply Line Safety Campaign to correct this condition by replacing the fuel tubes with new fuel tubes and installing vibration isolators for cylinders 4,5 and 6. This campaign is currently available at Cummins Distributors and authorized Warranty dealers. The repair will be completed free of charge and most applications will require approximately 2 hours to complete. WHAT SHOULD YOU DO? Contact the nearest Cummins Distributor or authorized Warranty Dealer to arrange to have this campaign performed on your engine. The distributor or dealer will work with you to schedule the best date to complete the repair. In the meantime, Cummins advises you to periodically check the injector fuel tubes for signs of leaking and to seek repairs if leaks are identified. If a leak occurs, the operator may smell diesel fuel or observe a mist. C Cummins Inc. Box 3005 Columbus, IN 47202 – 3005 USA Mail Code: 40911 Phone: 1 800 CUMMINS care cummins.com WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS? If you have questions or concerns about this recall, please contact your local Cummins Distributor or authorized warranty dealer. You may also contact Cummins Care at 1-800- CUMMINS (1-800-286-6467), or visit our website at care.cummins.com. If you have a complaint relative to this recall, you may report it to the following: Administrator National Highway Traffic Safety Administration 1200 New Jersey Avenue, SE Washington, DC 20590 You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. If you have not registered your Cummins product, please complete the enclosed registration card or register your product at https://prodreg.cummins.com/prodreg/#/webform/contactInfo. If you are no longer the owner of the generators(s) listed on the enclosed table, please forward this notice to the new owner or provide the new owner’s contact information to Cummins so that we can notify them of this recall. Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days. Also, it is a violation of Federal law for a dealer to deliver a new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied. Cummins is taking this action in the interest of your safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter. Sincerely, Campaign Administrator Cummins Inc. C.
**************************************************************************************************************
CUMMINS WARRANTY MEMO Subject: Interim Notification Regarding Pending Safety Campaign C2532 to Address a Concern with the Fuel Injector Supply Line on certain X12 Engines Number: m2201 Date: 13-Jan-2022 Attention: Worldwide Distributors/Branches and Division/Regional Offices U.S./Canada Warranty Dealers (Engine, CIHR MR & HD) —————————————————————- If additional information is required, call 1-800-CUMMINS for assistance. —————————————————————- This Memo is for information only and will not result in a change to the Warranty Administration Manual. —————————————————————- PURPOSE: The purpose of this memo is to notify repair locations that Cummins Inc. is initiating interim end user notification mailings regarding a safety defect on certain X12 engines. DISCUSSION: Cummins Inc. has decided that a defect which relates to safety exists in certain X12 CM2350 X119B engines that were manufactured between April 26, 2016 and October 11, 2021 and certain X12 CM2450 X137B engines that were manufactured between August 27, 2019 and November 1, 2021. The fuel tubes between the fuel rail and the injector for cylinders 4, 5 and 6 may be susceptible to cracking, resulting in a high-pressure fuel leak. A high-pressure fuel leak in the presence of an ignition source may increase the risk of a fire. Cummins has notified affected Original Equipment Manufacturers to which these engines have been shipped and has filed a Defect Notification with the U.S. National Highway Traffic Safety Administration for applicable engines. NHTSA has assigned this recall number 21E-099. The Safety Campaign is being finalized; it is currently expected to be published on QuickServe Online on or about February 17, 2022 when the parts are expected to be available. Campaign Number C2532 will apply to this Safety Campaign. ACTION: Until the Safety Campaign is available, for affected units that develop a leak, replace the fuel line per service procedure in the associated service manual and refer to TSB210271 for information regarding vibration isolator installation. For units that are not leaking, distributors and dealers must wait until the appropriate Safety Campaigns are published on QSOL to schedule any repairs. Cummins expects to begin notifying owners on January 28, 2022 with interim letters informing them that the safety defect exists and that they will receive another notice when the repair is available. Cummins is advising customers to check for leaks in accordance with the daily maintenance schedule outlined in the appropriate Engine Owner’s Manual and seek repairs if leaks are identified. If a leak occurs, the operator may see or smell diesel fuel. A second notification will be sent to end users to inform them when the final remedy is available and provide instructions to schedule the recall for their engine. The second notifications are expected to mail during 1st Quarter of 2022. Customers and repair locations with questions may contact Cummins Care at 1-800-CUMMINS (1-800-286-6467).
**************************************************************************************************************
The information contained in this letter supercedes and supplements any related policies and procedures in any previously released bulletins, the Warranty Manual, and/or previously released letters. Failure to read or distribute this letter will not exempt addressees from compliance with the information contained herein. Page 1 of 1 Daimler Trucks North America LLC REF #: ICI22-006 Effective: 01/28/2022 Release: 02/15/2022 SUBJECT: FL915 Cummins Fuel Injection Supply Line (Companion Campaign) This letter is to inform you that Recall FL915 – Cummins Fuel Injection Supply Line is a supplier responsible recall. Cummins has notified customers and repair locations of the Interim notification regarding Cummins safety recall C2532 Cummins is in the process of securing parts, special tooling and repair instructions. A second/Final notice will be mailed when parts and tooling are available. Cummins is advising customers to check for leaks in accordance with the daily maintenance schedule outlined in the appropriate Engine Owner’s Manual and seek repairs if leaks are identified. Note for DTNA dealers: Any Interim or Final repair will be completed by Cummins Distributors and authorized Warranty Dealers. This ICI letter is for your information should the dealership get any questions. For your reference, a copy of the Cummins owner notice, with French translation, concerning Cummins safety recall C2532 is on the following pages. If you have questions or concerns about this recall, please contact your local Cummins Distributor or authorized Warranty Dealer. You may also contact Cummins Care at 1-800-CUMMINS (1-800-286-6467), or visit our website at care.cummins.com. If you have questions or need further information, contact the Warranty Campaigns Department by submitting an inquiry through the WSC Link on DTNAConnect, or contact Cummins at 1-800-CUMMINS for assistance. WARRANTY CAMPAIGNS DEPARTMENT P.O. Box 4090 800-547-0712 Portland, Oregon 97208-4090 ATTENTION: Dealer Principal, Warranty Manager, Service Manager, Parts Manager Freightliner Dealers – U.S. and Canada Western Star and Sterling Dealers – U.S. and Canada FCCC Dealers – U.S. and Canada Direct Warranty Customers – U.S. and Canada If you have questions about this Letter, please submit your inquiry on the Web using the WSC Link on DTNAConnect Cummins Inc. Box 3005 Columbus, IN 47202 – 3005 USA Mail Code: 40911 Phone: 1 800 CUMMINS care cummins.com *** IMPORTANT SAFETY RECALL*** NHTSA Recall No. 21E-099 Cummins Campaign #C2532 INTERIM RECALL NOTIFICATION January 28, 2022 Dear Cummins Customer: This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Cummins Inc. has decided that a defect which relates to motor vehicle safety exists in certain Cummins X12 Engines that were manufactured between April 26, 2016 and November 1, 2021 and for installation in mixer, truck, coach, emergency vehicle, refuse truck, recreational vehicle and crane applications. This notice applies to the engines(s)/vehicles(s) listed on the enclosed table. WHAT IS THE PROBLEM? The fuel tubes between the fuel rail and the injectors for cylinders 4, 5 and 6 may be susceptible to cracking, resulting in a high pressure fuel leak. A high pressure fuel leak in the presence of an ignition source may increase the risk of a fire. WHAT ARE WE DOING ABOUT THE PROBLEM? Cummins is currently developing the permanent remedy for this issue. You will receive a second notification to inform you when the final remedy is available and to provide instructions to schedule the recall for your engine. WHAT SHOULD YOU DO? In the meantime, Cummins advises you to periodically check the injector fuel tubes for signs of leaking and to seek repairs if leaks are identified. If a leak occurs, the operator may smell diesel fuel or observe a mist. WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS? If you have questions or concerns about this recall, please contact your local Cummins Distributor or authorized warranty dealer. You may also contact Cummins Care at 1-800- CUMMINS (1-800- 286-6467), or visit our website at care.cummins.com. Cummins Inc. Box 3005 Columbus, IN 47202 – 3005 USA Mail Code: 40911 Phone: 1 800 CUMMINS care cummins.com If you have a complaint relative to this recall, you may report it to the following: Administrator National Highway Traffic Safety Administration 1200 New Jersey Avenue, SE Washington, DC 20590 You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http://www.safercar.gov. If you have not registered your Cummins product, please complete the enclosed registration card or register your product at https://prodreg.cummins.com/prodreg/#/webform/contactInfo. If you are no longer the owner of the engines(s) listed on the enclosed table, please forward this notice to the new owner or provide the new owner’s contact information to Cummins so that we can notify them of this recall. Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days. Also, it is a violation of Federal law for a dealer to deliver a new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied. Cummins is taking this action in the interest of your safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter. Sincerely, Campaign Administrator Cummins Inc. Cummins Inc. Box 3005 Columbus, IN 47202 – 3005 USA Mail Code: 40911 Phone: 1 800 CUMMINS care cummins.com *** IMPORTANT SAFETY RECALL*** Interim Recall Notice Transport Canada Recall #2021-756 January, 28, 2022 Dear Cummins Customer: This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may contain a defect that could affect the safety of a person. Cummins is conducting a recall involving certain Cummins X12 Engines that were manufactured between April 26, 2016 and November 1, 2021 and for installation in mixer, truck, coach, emergency vehicle, refuse truck, recreational vehicle and crane applications. This notice applies to your engine(s)/vehicle(s) listed on the enclosed table. WHAT IS THE PROBLEM? The fuel tubes between the fuel rail and the injectors for cylinders 4, 5 and 6 may be susceptible to cracking, resulting in a high pressure fuel leak. A high pressure fuel leak in the presence of an ignition source may increase the risk of a fire. WHAT WILL CUMMINS DO? Cummins is currently developing the permanent remedy for this issue. You will receive a second notification to inform you when the final remedy is available and to provide instructions to schedule the recall for your engine. WHAT SHOULD YOU DO? Cummins advises you to periodically check the injector fuel tubes for signs of leaking and to seek repairs if leaks are identified. If a leak occurs, the operator may smell diesel fuel or observe a mist. Vehicle lessors receiving this recall notice are required by law to forward a copy of this notice and any subsequent notices to the lessee within ten (10) days. WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS? If you have questions or concerns about this recall, please contact your local Cummins Distributor or authorized warranty dealer. You may also contact Cummins Care at 1-800- CUMMINS (1-800- 286-6467) or visit our website at care.cummins.com. For additional information about the recall, you may contact Transport Canada’s Information Centre at 1-800-333-0510. Cummins Inc. Box 3005 Columbus, IN 47202 – 3005 USA Mail Code: 40911 Phone: 1 800 CUMMINS care cummins.com If you have not registered your Cummins product, please complete the enclosed registration card or register your product at https://prodreg.cummins.com/prodreg/#/webform/contactInfo. If you are no longer the owner of the engine(s) or vehicle(s) listed on the enclosed table, please forward this notice to the new owner or provide the new owner’s contact information to Cummins so that we can notify them of this recall. Cummins is taking this action in the interest of your safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter. Sincerely, Campaign Administrator Cummins Inc. Les informations contenues dans la présente lettre remplacent et complètent toutes les politiques et procédures connexes contenues dans les bulletins publiés précédemment, le Manuel de garantie et/ou les lettres publiées précédemment. Le défaut de lire ou de distribuer la présente lettre n’exemptera pas les destinataires de se conformer aux renseignements contenus dans les présentes. Page 1 de 1 Daimler Trucks North America LLC RÉF # : ICI22-006 Effectif : 28/01/2022 Relâchez : 15/02/2022 OBJET : FL915 Ligne d’approvisionnement d’injection de carburant Cummins (campagne complémentaire) Cette lettre a pour but de vous informer que le rappel FL915 – Cummins Fuel Injection Supply Line est un fournisseur responsable du rappel. Cummins a informé les clients et les sites de réparation de la notification intermédiaire concernant le rappel de sécurité Cummins C2532. Cummins est en train de sécuriser les pièces, l’outillage spécial et les instructions de réparation. UNE Un deuxième/dernier avis sera envoyé par la poste lorsque les pièces et l’outillage seront disponibles. Cummins conseille aux clients de vérifier les fuites conformément au programme d’entretien quotidien décrit dans le manuel du propriétaire du moteur approprié et de demander des réparations si des fuites sont identifiées. Remarque pour les concessionnaires DTNA : Toute réparation intermédiaire ou finale sera effectuée par les distributeurs Cummins et les concessionnaires agréés sous garantie. Cette lettre ICI est pour votre information si le concessionnaire a des questions. À titre de référence, une copie de l’avis du propriétaire Cummins, avec traduction en français, concernant le rappel de sécurité Cummins C2532 se trouve dans les pages suivantes. Si vous avez des questions ou des préoccupations au sujet de ce rappel, veuillez contacter votre distributeur Cummins local ou votre revendeur agréé sous garantie. Vous pouvez également contacter Cummins Care au 1-800-CUMMINS (1-800-286-6467) ou visiter notre site Web à care.cummins.com. Si vous avez des questions ou avez besoin de plus amples informations, contactez le service des campagnes de garantie en soumettant une demande via le lien WSC sur DTNAConnect, ou contactez Cummins au 1-800-CUMMINS pour obtenir de l’aide. DÉPARTEMENT CAMPAGNES DE GARANTIE Case postale 4090 800-547-0712 Portland( Oregon) 97208-4090 ATTENTION : Concessionnaire principal, Gestionnaire de garantie, Gestionnaire de service, Gestionnaire de pièces Concessionnaires Freightliner — États-Unis et Canada Western Star et Sterling Dealers — États-Unis et Canada Concessionnaires FCCC — États-Unis et Canada Clients de garantie directe — États-Unis et Canada Si vous avez des questions au sujet de cette lettre, veuillez soumettre votre demande sur le Web en utilisant le lien WSC sur DTNAConnect Cummins Inc. Box 3005 Columbus, IN 47202-3005 États- Unis Code de courrier : 40911 Téléphone : 1 800 CUMM NS *** RAPPEL IMPORTANT CONCERNANT LA SÉCURITÉ *** Avis provisoire de rappel Numéro de rappel de Transports Canada 2021-756 janvier 28, 2022 Cher client Cummins, Le présent avis vous est envoyé conformément aux exigences de la Loi sur la sécurité automobile. La présente a pour but de vous informer que votre véhicule est susceptible d’avoir un défaut qui pourrait porter atteinte à la sécurité humaine. Cummins procède à un rappel concernant certains moteurs Cummins X12 fabriqués entre le 26 avril 2016 et le 1er novembre 2021 destinés à être installés sur des mélangeurs, des camions, des autocars, des véhicules d’urgence, des camions à ordures, des véhicules récréatifs et des grues. Le présent avis s’applique aux moteurs ou véhicules figurant dans le tableau ci-joint. QUEL EST LE PROBLÈME? Les tubes de carburant entre la rampe de carburant et les injecteurs des cylindres numéro 4, 5 et 6 peuvent se fissurer, entraînant une fuite de carburant à haute pression. Une fuite de carburant à haute pression qui entre en contact avec une source d’allumage représente un risque de feu. QUELLE SERA LA RÉPONSE DE CUMMINS? Cummins travaille actuellement à mettre au point une solution permanente à ce problème. Vous recevrez un deuxième avis qui vous indiquera le moment où une solution définitive sera offerte et qui vous donnera aussi des instructions pour procéder au rappel de votre moteur. QUE DEVEZ-VOUS FAIRE ? Cummins vous recommande d’effectuer une vérification périodique des tubes d’alimentation des injecteurs afin d’y déceler tout signe de fuite et pour pouvoir effectuer les réparations nécessaires, le cas échéant. Si des fuites surviennent, il est possible que l’opérateur perçoive l’odeur de carburant diesel ou qu’il observe une vapeur de carburant. Les ailleurs de véhicules qui reçoivent le présent avis de rappel doivent en faire suivre une copie aux locataires, ainsi qu’une copie de tout avis subséquent, dans un délai de dix (10) jours. Cummins Inc. Box 3005 Columbus, IN 47202-3005 États- Unis Code de courrier : 40911 Téléphone : 1 800 CUMM NS QUI DEVEZ-VOUS CONTACTER EN CAS DE QUESTION OU D’INQUIÉTUDE? Communiquez avec votre distributeur local ou avec votre concessionnaire de garantie agréé Cummins pour toute question ou toute inquiétude concernant ce rappel. Vous pouvez également communiquer avec l’équipe d’entretien de Cummins au 1 800 CUMMINS (1 800 286-6467), ou visiter notre site Web care.cummins.com. Pour plus d’informations sur le rappel, vous pouvez contacter le Transport Canada’s Information Centre au 1-800-333-0510. Si vous n’avez pas enregistré votre produit Cummins, veuillez remplir la carte d’enregistrement ci-jointe ou enregistrez votre produit sur le site; https://prodreg.cummins.com/prodreg/#/webform/contactInfo. Si vous n’êtes plus le propriétaire du ou des moteurs qui figurent dans le tableau ci-joint, veuillez faire parvenir le présent avis au nouveau propriétaire ou faire parvenir ses coordonnées à Cummins afin que nous puissions l’avertir de ce rappel. Cummins prend cette mesure pour renforcer votre sécurité et pour accroître votre satisfaction en ce qui concerne nos produits. Nous vous présentons toutes nos excuses pour ce désagrément et nous vous remercions de votre attention. Bien cordialement, Administrateur de campagne Cummins Inc.
**************************************************************************************************************
FL915 Cummins X-12 Engine High Pressure Fuel Line Colleagues, Attached is information for Daimler Trucks North America’s recall FL915. This recall has not yet been released. Owners have not been notified. If you need to update owner addresses then please do so by sending the updated information to our registrations department at WarrantyDEP@Daimler.com within 5 business day of this notification. Thank you, Leo P. Connolly Daimler Truck North America Campaign Manager 503.745.7707
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 21V-965 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Daimler Trucks North America, LLC Submission Date : DEC 13, 2021 NHTSA Recall No. : 21V-965 Manufacturer Recall No. : FL-915 Manufacturer Information : Manufacturer Name : Daimler Trucks North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 2,843 Estimated percentage with defect : 1 % Vehicle Information : Vehicle 1 : 2020-2022 Western Star 4700 Vehicle Type : Body Style : Power Train : NR Descriptive Information : Cummins states per NHTSA filing 21E-099, “These engines are equipped with High Pressure Common Rail fuel systems and sold for installation in mixer, truck, coach, emergency vehicle, refuse truck, recreational vehicle and crane applications. The recall consists of the entire population of engines equipped with a certain Injector Fuel Supply Tube (fuel tube) prior to the implementation of corrective action.” Production Dates : FEB 26, 2019 – NOV 24, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2019-2022 Freightliner 114SD Vehicle Type : Body Style : Power Train : NR Descriptive Information : Cummins states per NHTSA filing 21E-099, “These engines are equipped with High Pressure Common Rail fuel systems and sold for installation in mixer, truck, coach, emergency vehicle, refuse truck, recreational vehicle and crane applications. The recall consists of the entire population of engines equipped with a certain Injector Fuel Supply Tube (fuel tube) prior to the implementation of corrective action.” Production Dates : OCT 10, 2018 – NOV 10, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 21V-965 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 3 : 2021-2022 Western Star 49X Vehicle Type : Body Style : Power Train : NR Descriptive Information : Cummins states per NHTSA filing 21E-099, “These engines are equipped with High Pressure Common Rail fuel systems and sold for installation in mixer, truck, coach, emergency vehicle, refuse truck, recreational vehicle and crane applications. The recall consists of the entire population of engines equipped with a certain Injector Fuel Supply Tube (fuel tube) prior to the implementation of corrective action.” Production Dates : DEC 08, 2020 – NOV 10, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 4 : 2021-2022 Freightliner Cascadia P4 Vehicle Type : Body Style : Power Train : NR Descriptive Information : Cummins states per NHTSA filing 21E-099, “These engines are equipped with High Pressure Common Rail fuel systems and sold for installation in mixer, truck, coach, emergency vehicle, refuse truck, recreational vehicle and crane applications. The recall consists of the entire population of engines equipped with a certain Injector Fuel Supply Tube (fuel tube) prior to the implementation of corrective action.” Production Dates : FEB 10, 2020 – NOV 10, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 5 : 2022-2022 Western Star 47X Vehicle Type : Body Style : Power Train : NR Descriptive Information : Cummins states per NHTSA filing 21E-099, “These engines are equipped with High Pressure Common Rail fuel systems and sold for installation in mixer, truck, coach, emergency vehicle, refuse truck, recreational vehicle and crane applications. The recall consists of the entire population of engines equipped with a certain Injector Fuel Supply Tube (fuel tube) prior to the implementation of corrective action.” Production Dates : MAY 19, 2021 – OCT 08, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 21V-965 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 6 : 2021-2021 Western Star WF110 Vehicle Type : Body Style : Power Train : NR Descriptive Information : Cummins states per NHTSA filing 21E-099, “These engines are equipped with High Pressure Common Rail fuel systems and sold for installation in mixer, truck, coach, emergency vehicle, refuse truck, recreational vehicle and crane applications. The recall consists of the entire population of engines equipped with a certain Injector Fuel Supply Tube (fuel tube) prior to the implementation of corrective action.” Production Dates : JUL 13, 2020 – JUL 15, 2020 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 7 : 2020-2020 Western Star WJ121 Vehicle Type : Body Style : Power Train : NR Descriptive Information : Cummins states per NHTSA filing 21E-099, “These engines are equipped with High Pressure Common Rail fuel systems and sold for installation in mixer, truck, coach, emergency vehicle, refuse truck, recreational vehicle and crane applications. The recall consists of the entire population of engines equipped with a certain Injector Fuel Supply Tube (fuel tube) prior to the implementation of corrective action.” Production Dates : AUG 22, 2019 – AUG 22, 2019 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 8 : 2019-2021 FCCC XCP Chassis Vehicle Type : Body Style : Power Train : NR Descriptive Information : Cummins states per NHTSA filing 21E-099, “These engines are equipped with High Pressure Common Rail fuel systems and sold for installation in mixer, truck, coach, emergency vehicle, refuse truck, recreational vehicle and crane applications. The recall consists of the entire population of engines equipped with a certain Injector Fuel Supply Tube (fuel tube) prior to the implementation of corrective action.” Production Dates : OCT 18, 2018 – MAR 24, 2020 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Cummins states per NHTSA 21E-099, “The fuel tubes between the fuel rail and the injector for cylinders 4, 5 and 6 may be susceptible to cracking, resulting in a high-pressure fuel leak.” FMVSS 1 : NR Part 573 Safety Recall Report 21V-965 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 FMVSS 2 : NR Description of the Safety Risk : Cummins states per NHTSA 21E-099, “A high pressure fuel leak in the presence of an ignition source may increase the risk of a fire.” Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Component Name 1 : Fuel Tubes Component Description : Engine Fuel Tubes Component Part Number : D0S3005BX03, D0S3009BX03 Supplier Identification : Component Manufacturer Name : Cummins, Inc. Address : Box 3005, Mail Code 41303 Columbus Indiana 47202-3005 Country : United States Chronology : Cummins states per NHTSA 21E-099, “As part of the investigation, Cummins identified 29 warranty claims for fuel tube fuel leaks (not all of which had cracked tubes) with a date range of March 6, 2020 through September 22, 2021 (as of September 22, 2021).19Oct2021 – Cummins investigated a September 2021 fire on a vehicle equipped with an X12 engine. 25Oct2021 – Cummins identified a leak of the #5 cylinder fuel tube as the cause of the fire.28Oct2023 – Cummins completed a Product Safety Hazard Analysis.” Cummins notified DTNA on December 2, 2021. DTNA investigated the matter and promptly declared a recall. Part 573 Safety Recall Report 21V-965 Page 5 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Remedy : Description of Remedy Program : Cummins states per NHTSA 21E-099, “The subject fuel tubes for cylinders 4, 5 and 6 (the rear half of the engine) will be replaced with new fuel tubes (having the same part number as the recalled components) and vibration isolators will be added to the fuel tubes. A recall-specific reimbursement plan will be provided on the Recall Portal for those units not covered by the manufacturer’s limited warranty.” How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : Customer notification will be made by first class mail using Daimler Trucks North America records to determine the customers affected. Planned Dealer Notification Date : FEB 10, 2022 – FEB 10, 2022 Planned Owner Notification Date : FEB 10, 2022 – FEB 10, 2022 * NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END