Solenoid Corrosion May Hinder Fire Fighting – 2009-2021 Spartan Gladiator & MetroStar Emergency Vehicles

“This site contains affiliate links for which OEMDTC may be compensated”

July 26, 2021 NHTSA CAMPAIGN NUMBER: 21V567000

Solenoid Corrosion May Hinder Fire Fighting

A loss of power to the pump control module can cause a loss of water pressure for fighting fires, increasing the risk of injury.

 

NHTSA Campaign Number: 21V567

Manufacturer Marion Body Works Inc.

Components ELECTRICAL SYSTEM, EQUIPMENT

Potential Number of Units Affected 52

 

Summary

Marion Body Works Inc. is recalling certain 2009-2021 Gladiator and MetroStar emergency vehicles. The pump shift solenoid may corrode internally, causing a loss of power to the pump control module.

 

Remedy

Dealers will replace the solenoids, free of charge. Owner notification letters were mailed on August 13, 2021. Owners may contact Marion Body Works customer service at 1-715-754-5261. Marion Body Works number for this recall is 21V-329.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Solenoid Corrosion may Hinder Fire Fighting – 2009-2021 Spartan Fire Gladiator & MetroStar Emergency Vehicles

 

Solenoid Corrosion may Hinder Fire Fighting – 2009-2021 Spartan Fire Gladiator & MetroStar Emergency Vehicles

 


26 Affected Products

Vehicles

MAKE MODEL YEAR
SPARTAN FIRE GLADIATOR 2009-2021
SPARTAN FIRE METROSTAR 2009-2021

 


4 Associated Documents

Recall Acknowledgement

RCAK-21V567-4362.pdf 646.183KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [631.04 KB]

 


Defect Notice 573 Report

RCLRPT-21V567-1642.PDF 213.807KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.80 KB]

 


Recall 573 Report- Amendment 1

RCLRPT-21V567-9413.PDF 213.809KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.80 KB]

 


Recall 573 Report- Amendment 2

RCLRPT-21V567-4024.PDF 213.848KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.84 KB]

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V567&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
Max 300A 12 Volt Continuous Duty Solenoid Relay 4-Terminal for Golf Carts Heavy Duty Winch Marine in Rush SPST 12VDC 12V Solenoid Relay Nickel-Plating
  • ✦ 【Specification】4-pole battery isolation solenoid valve: Voltage: 12VDC; Resistance: 14Ω; Capacity: 10.2W; Maximum transient flash current: 300Amp; but Continuous Working Current recommend under 150 Amp,Bracket:Straight;Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center
  • ✦ 【Materials】4 Terminal Max 300A 12 Volt With 2 Copper Point Continuous Duty Solenoid Relay ,The The electromagnetic relay adopts high-quality components, Coil Roll is using 180℃ copper wire, Cover is Nickel-Plating, Meet Environmental Plating Requirment.The Nickel-Plating outer layer and the inside of the canned coil, suitable for use in any environment.
  • ✦ 【Replaces Parts Number】This Continuous Duty Solenoid Relay Replacement For 70-111224, 3635820, 1114208, 1114218, 1114223, 1114534, 1114547
  • ✦ 【Function 】good saver to your battery ( Max Flash Current 300A). Copper Terminal Contactor Improve Electricity - Reduce The Power Loss,Reach Transient Current 300A
  • ✦【Note】Usually with 80Amp as working current, need Break 5 seconds on, 50 minutes off
SaleBestseller No. 2
SS581T/ ALL76203 12V SW3 Heavy Duty Diesel Hot Rod Starter Solenoid Relay Replaces B-6A-11450A,C6AF,C7AF,C3912, C9AF,D2AF11450AA 50-430
  • 【Introduction】:Standard Motor SS581T T-Series caltric starter solenoid relay(SS581T)
  • 【OEM】: The manufacturer part number for reference is B6AZ-11450-A.
  • 【Material】: Robust plastic and copper shell, anti-corrosion, durable, gasket of solenoid valve is with great heat resistance performance
  • 【Specifications】:12-volt, 4-terminal and grounded base. Battery terminal 5/16-24, motor terminal 5/16-24, switch terminal 10-32 post, relay terminal 10-32 post
  • 【Quality Guarantee】:One Year Warranty,Hassle-Free Return and Money Back, Shop with Confidence!
Bestseller No. 3
Disenparts MZJ-400A Contactor Solenoid Universal 48V 400A Compatible With Heavy Duty Golf Cart
  • Part Number: MZJ-400A
  • Compatible With Heavy Duty Golf Cart
  • Mounting Hole Diameter: 6mm / 0.24 Thread Size: M10x1.5
  • Voltage: 48V Current: 400A
  • It Is a Replacement Part, Not Original Part. But It Can Work Good For You
Bestseller No. 4
Upgrade Max 300A in Rush Continuous Duty Solenoid Relay Nickel-Plating for Golf Carts, Winch, Marine 12VDC
  • Resistance is 14Ω, Capacity is 10.2W, Contacts:Normally Open (NO)/ 12VDC WITH 2 COPPER POINT
  • Replaces:70-111224,3635820, 1114208, 1114218, 1114223, 1114534, 1114547/ Bracket:Straight;Spst, One circuit: Off - On, Bracket mounting:Holes 5/16 x 19/32 2-13/64 on center
  • Our Coil Roll is using 180℃ copper wire, Cover is Nickel-Plating, Meet Environmental Plating Requirment, And Avoid Rusting, Shining
  • Max Transient current can be 300A, but Continuous Working Current recommend under 150 Amp/ WARRANTY: Life Long Warranty and Free Return and Full Refund
  • Note: Need Break 5 sec on, 50 min off If u need work on high Amp, Or it will burned / If u need a long working one, pls note us.
Bestseller No. 5
HVACSTAR 36 Volt 400A Main Contactor Solenoid MZJ-400A for Heavy Duty Golf Cart
  • MZJ-400A 36 Volt 400A Main Contactor Solenoid
  • New aftermarket
Bestseller No. 6
AFEISOL Hot Rod Starter Relay Solenoid 12V 4-Terminal Heavy Duty SW3 Compatible with 1956-up Ford Truck Starter Replaces B-6A-11450A C6AF C7AF C3912 C9AF D2AF11450AA 50-430 (Red)
  • 【HIGH-QUALITY AFTER-MARKET REPLACEMENT】The starter solenoid relay is made of high-quality copper coil inside, and the surface of the external contact is galvanized, which has strong corrosion and aging resistance and durability, and the solenoid valve gasket has good heat dissipation.
  • 【MULTICONTACT】4-terminal design,battery terminal 5/16-24,motor terminal 5/16-24,switch terminal 10-32 post,relay terminal 10-32 post.12 volts.Also with grounded base,ensure the stability and safety of the relay in the working process, improve the anti-interference ability of each electronic component.
  • 【APPLICABLE MODELS】SW3 Starter relay solenoid replacement for AEROSTAR,BRONCO,BOBCAT,BREEZEWAY, CALIENTE,CAPRI,COMET,COMMUTER, COUGAR,CYCLONE,MARAUDER,MARQUIS, MONTCLAIR.And 1958-1991 Ford Jeep Lincoln Mercury.
  • 【REPLACES PART#】The hot rod starter relay solenoid replaces the following models# SW3/B-6A-11450A/C6AF/C7AF/C3912/C9AF/D2AF11450AA/50-430/2700006/2900550/B4TZ-11002-A/B6A-11002A.
  • 【AFTER-SALES SERVICES】We are committed to providing you with better service, if you have any questions on the purchase, please contact us in a timely manner, we will be the first time for you to answer, one year of after-sales service, please rest assured that the purchase!
Bestseller No. 7
Fastronix Heavy Duty 200A Starter Solenoid
  • Ford Style Solenoid Rated to 200 Amps Starting Power at 12V
  • 5/16" Copper Main Studs and #10-32 Trigger Stud
  • Can be Mounted in ANY Orientation with 1/4" Bolts
  • Instructions/Wiring Diagram Included
  • Use with Fastronix 404-112 Terminal Covers and 405-012 Copper Lugs
Bestseller No. 8
MRELC New Hot Rod Starter Relay Solenoid 12V Heavy Duty SW3 Compatible with 1956-up and B-6A-11450A C6AF C7AF C3912 C9AF D2AF11450AA 50-430
  • Solenoid - Voltage: 12V
  • Compatible with B-6A-11450A C6AF C7AF C9AF SS588 F496 66-200 SNLS-135 SS581 SW3 SW3
  • Material: Zink alloy body of switch & 2 pcs of iron key & cooper connection terminals & Iron screw .
  • Eases installation:The flat base eases mounting and a remote under hood starter switch or timing light hook-up can be easily adapted
  • Package Included:1x Starter Relay,Two sets of screws
SaleBestseller No. 9
QuickCar Racing Products 50-430 Heavy Duty Starter Solenoid
  • Starter Solenoid, Heavy Duty, Ford Style, Black, Each
  • Country of Origin: UNITED STATES
  • Fit type: Vehicle Specific
  • Package Weight: 0.356 kilograms
Bestseller No. 10
MaySpare Continuous Duty Solenoid Relay NEED BREAK 24063 24 volt solenoid for Golf Carts,Winch, Marine Heavy Duty SPST Solenoid
  • Contacts:Normally Open (NO)/ 24VDC With 2 Copper Point, Solid Shell/ Copper 5/16-Inch -24 thread,
  • Max Transient current can be 300A/ Rated Current is 150A/ SPST, One Circuit, Off - On
  • Ignition coil wire is 180℃ ,Our Cover is Environmental Plating ,Sealed Unit Protects Solenoid From The Elements Helping Prevent Corrosion
  • Number:5945-01-516-0446, 5945-00-081-9491/ Make 80A Break 10 sec on, 30 min off -
  • WARNING: This is a start solenoid only finish work when your key start, if be Continuous Duty,can work 5 minutes under 150Amp, but NEED BREAK otherwise will be too hot to burned or fired

Last update on 2024-06-14 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...