Recall RC000228 – Heat Shield Missing Between LP Tank and Muffler – 2018-2022 Thor Motor Coach Axis & 2018-2021 Vegas Motorhomes

“This site contains affiliate links for which OEMDTC may be compensated”

June 10, 2021 NHTSA CAMPAIGN NUMBER: 21V441000

Heat Shield Missing Between LP Tank and Muffler

A missing heat shield increases the risk of a fire.

 

NHTSA Campaign Number: 21V441

Manufacturer Thor Motor Coach

Components EQUIPMENT, STRUCTURE

Potential Number of Units Affected 321

 

Summary

Thor Motor Coach (TMC) is recalling certain 2018-2022 Axis 25.6 and 2018-2021 Vegas 25.6 motorhomes. The heat shield between the LP tank and chassis muffler was not installed.

 

Remedy

Dealers will install a heat shield, free of charge. Owner notification letters were mailed July 22, 2021. Owners may contact TMC customer service at 1-877-855-2867. TMC’s number for this recall is RC000228.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Issue:

It has been discovered that on certain model year 2018-2022 25.6 Axis and Vegas Motorhomes, a heat shield is missing between the LP tank and chassis muffler. A heat shield was not properly installed in between the LP tank and chassis muffler during production, which is required if measurement is less than 18”. Current measurement is 11.8”, which does not follow guidelines of RVIA 5.2.5.1. There is a potential risk for a fire and/or property damage, which could result in serious injury or death.

 

Parts Required: 

TMC Recall Kit #: 0501457

 

Tools Needed:

  • 3/8” drive ratchet with ½” socket and 4” extension
  • 1/2” open end box end wrench
  • Creeper
  • Drop Light

 

Instructions: 

  1. Mount Heat Shield (TFM7403) to bottom of chassis frame using existing holes in frame that line up with the three slots in TFM7403 using supplied fasteners. Reference TIP0270 (found on next page) for assembly print.

 



9 Affected Products

Vehicles

MAKE MODEL YEAR
THOR MOTOR COACH AXIS 2018-2022
THOR MOTOR COACH VEGAS 2018-2021

 


9 Associated Documents

Remedy Instructions and TSB

RCRIT-21V441-6977.pdf 995.174KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [971.85 KB]

 


Defect Notice 573 Report

RCLRPT-21V441-6673.PDF 215.312KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [210.27 KB]

 


Recall Acknowledgement

RCAK-21V441-3122.pdf 724.901KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [707.91 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-21V441-8066.pdf 36.948KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [36.08 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-21V441-5014.pdf 139.509KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [136.24 KB]

 


Remedy Instructions and TSB

RCRIT-21V441-0812.pdf 995.174KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [971.85 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-21V441-1072.pdf 139.509KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [136.24 KB]

 


Recall Quarterly Report #2, 2021-4

RCLQRT-21V441-8506.PDF 211.239KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.29 KB]

 


Recall Quarterly Report #1, 2021-3

RCLQRT-21V441-9197.PDF 211.14KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.19 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V441&docType=RCL

 


 

“This site contains affiliate links for which OEMDTC may be compensated”
Bestseller No. 1
WISAUTO Aluminized Heat Shield Thermal Barrier Adhesive Backed Heat Blanket (12'' X 24'')
  • ✅【Suitable Size】the aluminized fiberglass sheet measures 12 x 24 inch, thickness: 0.032''(0.8MM). large size to use in daily life, you can simply trim the sheet into wanted shape or size to satisfy your various projects
  • ✅【High temperature resistance】: this adhesive backed heat barrier can withstand high temperature, its reflective surface can still screen off the heat and provide utmost protection, effectively protect parts and components, like painted surfaces and plastic parts, from damaging radiant heat. Reflective temperature of 600F, withstands radiant heat up to 1000F.
  • ✅【Convenient to apply】: innovatively designed with adhesive composite on its back, the heat shield protection barrier cover can be easily wrapped or laid on to any desired surfaces with a professional-like finish, make it clean and tidy
  • ✅【Reliale material】 : this heat shield protection barrier cover is made of glass fiber fabric with an aluminized outer facing, durable and reliable to use, can provide ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime
  • ✅【After-Sale Guarantee】—- We offer lifetime service for self adhesive heat barrier shield if you order it from our store. Any issue about this backed aluminized heat barrier sheet, please feel free to contact us.
Bestseller No. 2
FLASLD Aluminum Heat Shield Mat for Deck Fence, Railing, Grill, Stove, Oven and Refrigerator, Fireproof Cover and Screen Protect Deck Railing from Grill (30×40 inch)
  • Grill Railing Heat Protection - Usually we will place the grill near the deck railing, but the long-term high temperature of the grill will damage the railing, FLASLD designed this railing heat shield to resist the heat from the grill and protect the railing from heat damage.
  • Reflects 95% of Heat - Keep the back of the heat shield at a normal temperature to prevent damage from high temperature, Capable of reducing up to 95% of radiant heat.
  • Easy To Use - We reserved 6 metal holes on the aluminum heat shield, you can easily tie it to the fence with rolling tape.
  • Multi-Purpose Heat Barrier - No matter what area of your Grill or Home needs heat prevention; this barrier can be of sure help. May it be stove, painted surfaces, hoses, firepit, refrigerator, cabinets near ovens, car bottom insulationdoors, hoods, and a lot more.
  • Excellent backdrop to protect the deck railing behind the BBQ grill!
Bestseller No. 3
Peastorm Exhaust Heat Shield Automotive Embossed Aluminum Heat Shield Muffler Exhaust Wrap, 15" x 39"
  • Dimensions: 15" x 39", 15 mil thick, heavy duty embossed aluminum.
  • This material is a good thermal insulator and can withstand continuous high temperatures of 1100°F.
  • Easy to cut and shape, suitable for mufflers, chassis, fuel tank, catalytic converters, engine compartments, battery, intake, etc.
  • Compared with ordinary heat insulation cloth, it will be more durable and better heat insulation effect.
  • Kit includes a heat shield, two 39" long stainless steel ties. Please pay attention to the sharp edge of the product when disassembling.
Bestseller No. 4
BBTO Heat Reflective Sheet Adhesive Backed Aluminized Fiberglass Heat Shield Tape Protection Barrier Heat Shield Resistant Material for Hose and Auto Use Heat Insulation Sheet(Silver, 36 x 48 Inch)
  • Large size to use: the aluminized fiberglass sheet measures approx. 90 x 120 cm/ 36 x 48 inch, large size to use in daily life, you can simply trim the sheet into wanted shape or size to satisfy your various projects
  • High temperature resistance: this adhesive backed heat barrier can withstand high temperature, its reflective surface can still screen off the heat and provide utmost protection, effectively protect parts and components, like painted surfaces and plastic parts, from damaging radiant heat
  • Convenient to apply: innovatively designed with adhesive composite on its back, the heat shield protection barrier cover can be easily wrapped or laid on to any desired surfaces with a professional-like finish, make it clean and tidy
  • Multiple applications: the aluminized fiberglass sheet is a helpful addition in your life, can be applied to any cable, wire, plastic components, painted surfaces, doors, hoods for added heat protection, suitable for automotive parts, home repair, computer repair and more, finished edges to avoid fraying
  • Reliable material: this heat shield protection barrier cover is made of glass fiber fabric with an aluminized outer facing, durable and reliable to use, can provide ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime
Bestseller No. 5
Peastorm Exhaust Wrap Heat Shield Automotive Aluminum Material Muffler Wrap Insulation Armor, 12" x 24"
  • Dimensions: 12" x 24", 1/2″ thick, heavy duty embossed aluminum.
  • This heat shield is constructed from 10 mil aluminum bonded to heat-resistant glass fiber, can withstand continuous high temperatures of 1000°F.
  • Easy to cut and shape, suitable for mufflers, chassis, fuel tank, engine compartments, battery, intake, etc.
  • Compared with ordinary heat insulation cloth, it will be more durable and better heat insulation effect.
  • Kit includes a heat shield, two 39" long stainless steel ties. Please pay attention to the sharp edge of the product when disassembling.
Bestseller No. 6
FLASLD Aluminized Heat Shield Thermal Barrier Adhesive Backed Heat Blanket (12'' X 12'')
  • Withstands Extreme Heat — Made with aluminized finish which is flexible and durable woven silica, this Aluminized Adhesive Backed Heat Barrier can withstand scorching temperature above 2000 degrees Fahrenheit. Its reflective surface can still screen off the heat and provide utmost protection.
  • Reflects 95% of Heat — Keep the back of the heat shield at a normal temperature to prevent damage from high temperature, Capable of reducing up to 95% of radiant heat.
  • Suitable Size — We offer five different sizes, 12 x 12 inch, 12 x 24 inch, 12 x 40 inch, 24 x 24 inch, 24 x 40 inch, thickness: 0.032''(0.8MM). You can choose the size that is more suitable for your project, you can simply trim the sheet into wanted shape or size to satisfy your various projects.
  • Convenient to Apply — Innovatively designed with adhesive composite on its back, the heat shield protection barrier cover can be easily wrapped or laid on to any desired surfaces with a professional-like finish, make it clean and tidy, also a penny-saver from hiring service.
  • Multi-Purpose Adhesive Backed Heat Barrier — No matter what area of your Automobile or Home needs heat prevention; this barrier can be of sure help. May it be plastic components, painted surfaces, hoses, firewalls, refrigerator, cabinets near ovens, car bottom insulationdoors, hoods, and a lot more.
Bestseller No. 7
Racewill Titanium Pipe Shield 6" x 12" Exhaust Heat Shield, Two-layer Material Design Heat Protection up to 1350°F, Protects Heat Sensitive Components, Hoses, Lines, and Electrical Wiring
  • [Advanced Heat Protection] Advanced double-layer material design, outer layer-titanium material, Inside Inside-temp silica fabricc. Heat protection up to 1350°F.
  • [Easy Installation] Our unique rivet-based pipe standoff brackets and pipe clamps make installation a breeze.
  • [Reduce Heat] Unique shield bracket design provides an air gap between shield and ducting, which together provide maximum cooling and heat dissipation potential.
  • [Flexible Positioning] The easy-to-remove 3.5" hose clamp allows you to adjust it to your needs and preferences.
  • [Universal Fit] Flexible shields can be installed on almost any shape of pipe. Due to the special material, we would like to remind you to wear gloves during installation.
Bestseller No. 8
Ummickl 12'' X 48''Aluminized Heat Shield Mat Thermal Barrier Adhesive Backed Heat Blanket, Fiberglass Insulation Reflective Material High Temp Protection
  • 【Heat Shield Barrier】—- Multi-Purpose Adhesive Backed Heat Barrier No matter what area of your Automobile or Home needs heat prevention; this barrier can be of sure help. May it be plastic components, painted surfaces, hoses, firewalls, refrigerator, cabinets near ovens, car bottom insulationdoors, hoods, and a lot more.
  • 【Reflects 97% of Heat 】—- Keep the back of the heat shield at a normal temperature to prevent damage from high temperature, Capable of reducing up to 97% of radiant heat.
  • 【Withstand High Temp 】—- Made with aluminized finish which is flexible and durable woven silica, this Aluminized Adhesive Backed Heat Barrier can withstand scorching temperature above 2000 degrees Fahrenheit.Its reflective surface can still screen off the heat and provide utmost protection.
  • 【Convenient to Apply】—- Innovatively designed with adhesive composite on its back, the heat shield protection barrier cover can be easily wrapped or laid on to any desired surfaces with a professional-like finish, make it clean and tidy.
  • 【After-Sale Service】—- We offer lifetime service for this self adhesive heat barrier shield. Any issue about this backed aluminized heat barrier sheet, please feel free to contact us.
SaleBestseller No. 9
Aluminum Backed Aluminized Self Adhesive 12'' X 48’',Fiberglass Thermal Insulation Material High Temp Protection
  • 【Heat Shield Barrier】—- The self-adhesive heat shield protection cover is made of fiberglass, with an aluminized outer facing, durable and reliable to use, heat barrier sheet can provide ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime.Protect parts from damaging radiant heat well.
  • Adhesive Heat Barrier Sheet 】—- The aluminized heat shield thermal barrier adhesive is easy to apply on your parts which need protection. It is designed with adhesive composite on the back, the heat barrier shield mat cover can be easily wrapped or laid on to any desired surfaces with a professional-like finish, make it clean and tidy.
  • 【Withstand High Temp 】—- The heat barrier insulation can withstand high temperature. Reflective surface of the material is premium quality of withstanding radiant temperatures up to 2000 degrees. Capable of reflecting 90% of radiant heat.
  • 【Size of Aluminized Heat Barrier 】—- The aluminized heat barrier is 12inch width and 48inch length. It can be cut into any size you want and also be trimmed for wanted shape to satisfy your various projects.
  • 【After-Sale Service】—- We offer lifetime service for this self adhesive heat barrier shield. Any issue about this backed aluminized heat barrier sheet, please feel free to contact us.
SaleBestseller No. 10
BSTFLEX Reinforced Exhaust Heat Shield Mat 12 Inch x 24 Inch with Adhesive Backed Resistant High-temp (12'' x 24'')…
  • 【DESCRIPTION】This insulator helps to reflect and dissipate heat, making it perfect to be an airbox heat shield or heat shield barrier to protect the paint on your carbon-fiber/fiberglass hood
  • 【FEATURES POWERFUL】Continuous operating temperature of 1200 degree Fahrenheit and 2000 degree Fahrenheit intermittent, capable of reducing up to 80% of radiant heat
  • ADHESIVE HEAT SHIELD】 Adhesive backing sticks to almost any clean surface (not recommended for rough or unfinished fiberglass/carbon)
  • 【FIREWALL HEAT SHIELD】Used on a firewall to shield radiant heat, and is also perfect to shield heat in transmission tunnels. Helps shield fire walls, hoods, body panels, floor boards, heat shield automotive
  • 【Package Includes】1x Heat Shield Mat. Please note: there may be an error of 2/5inch in industrial cutting

Last update on 2024-03-17 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...