Recall 77-1361 – Shackle Nuts May Be Insufficiently Tightened – 2021 Forest River IBEX Travel Trailers

“This site contains affiliate links for which OEMDTC may be compensated”

June 11, 2021 NHTSA CAMPAIGN NUMBER: 21V442000

Shackle Nuts May Be Insufficiently Tightened

Loose shackle nuts can fall off the shackle bolt, causing the axle to detach and increasing the risk of a crash.

 

NHTSA Campaign Number: 21V442

Manufacturer Forest River, Inc.

Components SUSPENSION

Potential Number of Units Affected 42

 

Summary

Forest River, Inc. (Forest River) is recalling certain 2021 IBEX travel trailers. The shackle nuts may have been insufficiently tightened during production.

 

Remedy

Dealers will tighten shackle nuts, free of charge. Owner notification letters were mailed June 24, 2021. Owners may contact Forest River customer service at 1-574-642-3119. Forest River’s number for this recall is 77-1361.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


RECALL 21V442, 2021-371 REMEDY INSTRUCTIONS

Make(s): IBEX
Model(s): MANY, SEE BELOW
Model Year(s): 2021
Repair Code: RC-005-12-00-004074
Allotted Time: 1.00 HRS
Inspection Code: RC-005-05-00-004073
Allotted Time: .50 HRS
Concern: The shackle nuts may not be tight.
This condition allows the shackle nuts to freely rotate off the shackle bolt which may detach from the vehicle and cause loss of vehicle control which may lead to a crash.
Photo(s) Required: NO
Prior Authorization Required: YES
Part(s) Kit Number: F100272630
Part(s) Return: N/A

 

Disconnect the vehicles’ battery Positive and Negative, disconnect any House battery(s) Positive and Negative, if equipped with a generator ensure it is off and lastly, ensure the vehicle is disconnected from shore power.  Block any tires/wheels to prevent the vehicle from rolling. Failure to do so may result in electrocution, fire or other personal injury, property damage and/or death.

 

MODELS: BXT20BHS, BXT20BHS-W AND BXT23RLDS

 

STEP 1: SECURE THE TRAILER WITH JACK STANDS AND WHEEL CHOCKS;

 

STEP 2: INSPECT ALL SHACKLE NUTS AND BOLTS, THERE SHOULD BE AT LEAST THREE (3) SHACKLE BOLT THREADS PROTRUDING OUT OF THE SHACKLE NUT;

 

STEP 3: IF THERE IS NOT THE MINIMUM SHACKLE BOLT THREADS, IF THE NUT IS VISUALLY LOOSE OR MISSING, INSTALL A NEW SHACKLE NUT AND TIGHTEN TO THE MINIMUM THREAD EXPOSURE;

NOTE: BE SURE TO USE THE APPROPRIATE SIZE BOX WRENCH ON THE SHACKLE BOLT, IF THIS ISN’T              DONE, THE SPLINES ON THE SHACKLE BOLT(S) MAY BE DAMAGED.

 

STEP 4: BELOW ARE PICTURES OF LOOSE/MISSING SHACKLE NUTS AND A PICTURE OF CORRECTLY INSTALLED SHACKLE NUTS.

 


Dear Forest River Customer:

This notice is sent to you in accordance with the requirements of the Motor Vehicle Safety Act. This notice is also sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Forest River – Office of Corporate Compliance (“OCC”) has decided that a defect, which relates to the motor vehicle safety, exists in certain 2021 IBEX Travel Trailer recreational vehicles. This is to inform you that your vehicle may contain a defect that could affect the safety of a person.

 

WHAT IS THE DEFECT/NONCOMPLIANCE?

The shackle nuts may not be tight. This condition can allow the shackle nuts to rotate off the shackle bolt.

 

EVALUATION OF THE RISK TO THE VEHICLE AND OPERATOR(S) RELATED TO THE RECALL.

Insufficient tightening of the shackle nuts may cause the axle/suspension to detach from the vehicle which may cause loss of vehicle control which may lead to a crash, property damage, personal injury or death.

 

WHAT IS FOREST RIVER AND OUR DEALERSHIPS GOING TO DO?

Forest River is notifying dealerships of the recall. You may have the recall corrected at any Forest River dealership. However, it is preferable if you have your selling dealership perform the remedy. Forest River completely covers your cost for the remedy; you will not receive any bill of sale for anything covered under the above recall number.

 

WHAT SHOULD YOU DO?

Please contact your dealer immediately and request a service appointment to schedule the free remedy to ensure the shackle nuts are properly tightened. The vehicle Owner is responsible for arranging to have the work completed. Please state you have been notified by Forest River of having a recall in process for your vehicle and provide the recall number for the dealership. It is also helpful to the dealership to have a copy of this letter when you take your vehicle in for the recall remedy.
You may also visit www.forestriverinc.com for dealer locations.

 

HOW LONG WILL THE REMEDY PROCESS TAKE?

The estimated time of repair is 1.00 hours. However, the dealership may need to keep your vehicle or schedule an appointment with you for a later date to fit into their regular service schedule.

 

WHAT IF YOU HAVE PREVIOUSLY PAID FOR REPAIRS TO YOUR VEHICLE FOR THIS PARTICULAR CONDITION?

If you have already paid for a repair that is within the scope of this defect under recall, you still need to have this recall inspected and/or performed to ensure the correct parts and procedures were utilized.
Additionally, you may be eligible for a refund of previously paid repairs. Refunds will only be provided for within the scope of this defect under recall.

Please send the service invoice to the following address:

IBEX
Forest River, Inc.
Attn: WARRANTY MANAGER
1702 Century Dr.
Goshen, IN 46540

 



1 Affected Product

Vehicle

MAKE MODEL YEAR
FOREST RIVER IBEX 2021

 


8 Associated Documents

Recall Acknowledgement

RCAK-21V442-9133.pdf 645.734KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [630.60 KB]

 


Defect Notice 573 Report

RCLRPT-21V442-9279.PDF 213.885KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.87 KB]

 


Recall Quarterly Report #1, 2021-2

RCLQRT-21V442-1406.PDF 211.138KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.19 KB]

 


Remedy Instructions and TSB

RCRIT-21V442-6645.pdf 264.878KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [258.67 KB]

 


Manufacturer Notices(to Dealers,etc)

RCMN-21V442-9427.pdf 220.068KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [214.91 KB]

 


ISSUED Owner Notification Letter(Part 577)

RCONL-21V442-1518.pdf 211.436KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.48 KB]

 


Recall Quarterly Report #2, 2021-3

RCLQRT-21V442-9156.PDF 211.236KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.29 KB]

 


Recall Quarterly Report #3, 2021-4

RCLQRT-21V442-5219.PDF 211.324KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.37 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V442&docType=RCL

 


 

SaleBestseller No. 1
EPAuto 1/2-inch Drive Click Torque Wrench, 10-150 ft/lb, 13.6-203.5 N/m
  • Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
  • Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
  • Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
  • Accessories included: 1/2" Drive 5" long Extension Bar and 1/2" Drive to 3/8" Drive Reducer
  • Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
SaleBestseller No. 2
LEXIVON 3/8-Inch Drive Click Torque Wrench 10~80 Ft-Lb/13.6~108.5 Nm (LX-182)
  • PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
  • DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
  • LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
  • PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
  • COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
Bestseller No. 3
Hairich 1/2 Inch Drive Click Torque Wrench, Dual-direction Torque Wrench 10-170.0ft.lb/13.60-230.5Nm, 72-tooth Torque Wrenches with Dual Range Scales, ±3% High Precision Torque Wrench For Bike
  • ±3% HIGH PRECISION AND COOL APPEARANCE: 1/2 inch drive torque wrench (10-170ft.-lb/13.6-230.5Nm)has a calibration error range of ±3%, high precision, and comes with a corresponding serial number, which is easy to trace the original data, and you can use it with confidence.Hairich torque wrench not only has superior quality but also has a superior appearance. The classic combination of black and red is fashionable and textured, allowing you to enjoy a visual feast during use.
  • PREMIUM MATERIAL AND DURABLE: Experience the ultimate durability and antiskid with the torque wrench. The main body of Hairich torque wrench set is made of chrome vanadium steel alloy, which is more strong and more durable. The head of the inch-pound torque wrench adopts a ratchet design with a reversing device to improve work efficiency. The square knurled handle is made of aluminum titanium alloy, which is ergonomic and comfortable to hold for long-time use.
  • DUAL SCALE AND QUICK SETTING: Laser Printed by dual-range(ft-lb and Nm). Our professional torque wrench is easy to read and provides direct unit conversion, When the set torque value is reached, the torque wrench will make an audible and felt click to remind you to stop applying force. Pull down the lock knob and hold it until the torque setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value.
  • ERGONOMIC DESIGN AND POWERFUL: Every design of our industrial torque wrench conforms to ergonomic, easy to handle.72-tooth ratchet, 5° ratcheting arc head, a quick-release button for easy loading and unloading, and an aluminum non-slip handle for excellent grip and control. A recent research review that, 72-tooth ratchets are very professional tooth ratchets, you just only rotate 5 degrees to finish it. Not easy to slip and wear, can be used in small spaces, and is more durable and powerful.
  • EASY OPERATION AND SAFETY: Thanks to its bidirectional drive ratchet head, our torque wrench can be measured both clockwise and counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque. Notice: At low Nm settings under 5 Nm the "click" sound can be too light to hear.
Bestseller No. 4
SUERCUP 3/8-Inch Drive Click Torque Wrench - 5-45 Ft-Lb/6.8-61Nm, ±3% High Accuracy Torque Wrench, Dual-Direction Adjustable 72 Tooth Click Torque Wrench for Bike, Motorcycle and Car Repair
  • 【High Precision&Quick Reading】: 3/8 torque wrench has high contrast and dual range scale( 5-45 Ft-Lb/6.8-61 Nm),making it clear and easy to read. We have professional torque wrench production technology, and after 20000 tests, the calibration error range of the torque wrench is ± 3%, making it an essential helper for you.
  • 【Safe and Reliable Operation】: Equipped with a bidirectional drive ratchet head, torque can be measured clockwise or counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque.
  • 【High Quality and Durable Material】: Made of hardened chromium vanadium steel alloy (Cr-V). At the same time, the bottom buckle tail plug adopts a red anodizing process to improve the product's oxidation resistance during use and enhance surface wear resistance. 72 tooth ratchet head, made of chromium molybdenum steel. High quality materials resist corrosion and are durable.
  • 【Quick Torque Setting】: Simple and fast torque setting, pull down the locking knob and hold it down to rotate to the torque you need. Release the hand and the locking knob will automatically rebound to lock the torque value. And the designer referred to the appearance of the flashlight handle and designed a non slip and labor-saving knurled handle, making it more comfortable and easy to hold when using.
  • 【Easy to Store and Widely Use】: You will receive the 3/8-inch drive click torque wrench with a sturdy plastic shell storage box, which is very delicate and durable. Torque wrench is suitable nuts and bolts on various occasions, such as bike, motorcycle, car spark, and is the best helper for you🎁. 🔔 And we provide 12 months warranty. If you have any questions, please feel free to contact us.
Bestseller No. 5
VANPO 1/4 & 3/8 & 1/2-inch Drive Click Torque Wrench, 3Pcs Torque Wrench Set 20-240in.lb, 5-45ft.lb, 20-160ft.lb, Dual-Direction Adjustable 72-Tooth Torque Wrench for Bike, Moto, Car Maintenance
  • 【3Pcs Torque Wrench Set】 The calibration error range is ±3%, each torque wrench has a calibration certificate. The 3-in-1 torque wrench set can meet your different needs. Including 1/4 inch 20-240in.lb, 3/8 inch 5-45ft.lb, 1/2 inch 20-160ft.lb.
  • 【Safe & Reliable】 When the 1/2 torque wrench reaches the preset torque value, it makes a clear "click" sound, accompanied by an obvious hand vibration that reminds you no longer to apply force, prevent damage caused. 72-tooth reversible ratchet head, it can be used both clockwise and counterclockwise directions.
  • 【Quick Release Button】 This 3/8 torque wrench has a quick release button with which accessories can easily be installed and removed, the accessories can grip and is not easy to fall down. It is more convenient to use. The torque wrench is made of CR-MO with a higher hardness.
  • 【Easy to Set】First pull down the locking knob and hold it down and then start setting the desired torque value. Release the hand and the locking knob will automatically rebound to lock the torque value. If you do not use, please set the torque key to the minimal torque value.
  • 【Widely Use】The torque wrenches can satisfy you in bicycle, motorcycle, car, truck and wheel screws, wheel nuts and in the device installation, electrical engineering, etc. We provide 12 months warranty. If you have any questions, please feel free to contact us.
SaleBestseller No. 6
CRAFTSMAN Torque Wrench, 1/2" Drive (CMMT99434)
  • PORTABILITY: Torque wrench 1/2 inch drive has a durable case for portability or storage
  • ADDED COMFORT: Bi-material handle for comfort and grip of the 1/2 torque wrench
  • HASSLE FREE USE: Locking feature adjusts quick and easily for hassle free use
  • QUICK IDENTIFICATION: Scales stamped into housing showing inch and metric torque settings
  • Meets or Exceeds ASME Specifications
Bestseller No. 7
1/2" Drive Click Torque Wrench with Deep Impact Socket (6~24mm) ,Dual-Range【10-170ft.lb/10-227Nm】±3% Precision,Dual-Direction Adjustable Torque Wrench,10"Extension Bar,Universal Joint,Drill Adapter
  • 🔧【𝐌𝐢𝐥𝐢𝐭𝐚𝐫𝐲-𝐠𝐫𝐚𝐝𝐞 𝐒𝐭𝐞𝐞𝐥】ETOOLAB torque wrench utilizes military-grade steel as its base material, coupled with professional surface rust protection methods tailored to usage habits. While ensuring user comfort, it enhances product strength, wear resistance, and rust resistance. offers a more comfortable experience and a longer lifespan!
  • 👍【𝐄𝐚𝐬𝐲-𝐭𝐨-𝐑𝐞𝐚𝐝】The scale of this 1/2 drive torque wrench is laser-engraved, using a black background with white markings. dinamometrica de 1/2 ensures clear and easy readability of the scale, even in sunlight. With a dual-scale design, users can conveniently read torque values in two different units according to their preferences, without the need for conversion!
  • ⚙️【±𝟑% 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧 & 𝐒𝐢𝐦𝐩𝐥𝐞 𝐋𝐨𝐜𝐤𝐢𝐧𝐠 𝐑𝐢𝐧𝐠】Our torque wrench 1/2 drive meets the high precision standard of ±3% and comes with a traceable serial certificate. You can use it with confidence! Moreover, its graduation ring is tightly locked, with smaller incremental values, ensuring precise and consistent torque output even after multiple uses. This reduces the hassle of frequent adjustments. It is undoubtedly an excellent tool for your work!
  • 🔊【𝐋𝐨𝐮𝐝 𝐂𝐥𝐢𝐜𝐤 𝐒𝐨𝐮𝐧𝐝】This torque wrenches has been upgraded to have a louder "Click" sound. We conducted over 25,000 tests to ensure that each product produces a click sound volume of no less than 45dB when the torque value exceeds 34 lbf·ft. When you hear the distinct click sound, it indicates that the preset torque has been reached, signaling you to stop applying force. You no longer need to worry about damaging your mechanical components.
  • 💯【𝐔𝐬𝐞𝐫-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲】Our torque wrench set features a 72-tooth dual-directional ratchet head, allowing for easy operation in both clockwise and counterclockwise directions. It is designed with an adjustable locking ring, making it effortless to adjust the preset torque value. Additionally, it includes a quick-release head design, allowing it to replace the wrench head accessories more easily!
Bestseller No. 8
TEKTON 3/8 Inch Drive Micrometer Torque Wrench (10-80 ft.-lb.) | 24330
  • Includes 1-pc. 3/8 in. drive torque wrench; Storage case; Product manual with torque conversion chart
  • Wrench emits a click that can be heard and felt when the preset value is reached
  • Permanently marked, high-contrast dual-range scale is easy to read, even in low light
  • Reversible ratchet head drives in both directions and measures torque in clockwise direction
  • Durable all-steel construction has no plastic parts to break or wear out
Bestseller No. 9
TEKTON 1/4, 3/8, 1/2 Inch Drive Micrometer Torque Wrench Set (3-Piece) | TRQ99901
  • Includes 1-pc. 1/4 in. drive micrometer torque wrench (20-200 in.-lb.) with storage case and product manual; 1-pc. 3/8 in. drive micrometer torque wrench (10-80 ft.-lb.) with storage case and product manual; 1-pc. 1/2 in. drive micrometer torque wrench (25-250 ft.-lb.) with storage case and product manual
  • Wrenches emit a click that can be heard and felt when the preset value is reached
  • Permanently marked, high-contrast dual-range scale is easy to read, even in low light
  • Reversible ratchet heads drive in both directions and measure torque in clockwise direction
  • Durable all-steel construction has no plastic parts to break or wear out
Bestseller No. 10
NEBICALS 1/4-inch Drive Click Small Bike Accurate Torque Wrench 20-200in.lb/2.26-22.6Nm for Garage Car Maintenance, Small Engine, Bolt & Nut Fastening.
  • 【PRECISION】 - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate . Before shipping, we take 200 times calibration tests to make sure all wrenches performance well .
  • 【DURABLE】 - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
  • 【 RELIABLE & SAFE】: When small torque wrench set torque value is reached, the wrench will emits slight click sound to remind you to stop applying force to prevent overtorque damage to your items.
  • 【LONG-LASTING】 - Rust & corrosion protection with our unique and newly invented Chrome finish treatment.
  • 【 DUAL-DIRECTION MEASURES & WIDE USE】: The paddle of the mini torque wrench head can adjust the direction of use at any time,so that the wrench can be used both clockwise and counterclockwise directions. More widely used for Installation equipment, Electrical engineering, bicycle/motorcycle maintenance, Product assembly.With a storage box and an instruction manual.

Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...