| “This site contains affiliate links for which OEMDTC may be compensated” |
February 17, 2021 NHTSA CAMPAIGN NUMBER: 21V080000
Flywheel Capscrews Not Tightened Properly
A detached flywheel can cause loss of drive power, increasing the risk of a crash. Additionally, driveline pieces may be ejected from the engine compartment, increasing the risk of injury.
NHTSA Campaign Number: 21V080
Manufacturer PACCAR Incorporated
Components ENGINE
Potential Number of Units Affected 132
Summary
PACCAR Incorporated (PACCAR) is recalling certain 2021-2022 Kenworth T680, T880, W990, T800, W900 and Peterbilt 579, 567, 389, 367 vehicles equipped with a Cummins X15 engine. The capscrews that attach the flywheel to the crankshaft may have been improperly torqued, allowing the flywheel to detach.
Remedy
PACCAR will notify owners, and dealers will properly torque the capscrews and the engine will also be inspected for damage and, if necessary, repaired, free of charge. The recall began on March 29, 2021. Owners may contact PACCAR customer service at 1-425-828-5888 (Kenworth) or 1-940-591-4220 (Peterbilt). PACCAR’s numbers for this recall are 21KWA and 21PBB.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
*** IMPORTANT SAFETY RECALL***
Cummins Campaign #C2402
March 29, 2021
Dear Cummins Customer:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Cummins Inc. has decided that a defect which relates to motor vehicle safety exists in certain ISX Engines that were manufactured between October 27, 2020 and January 11, 2021.
This notice applies to your engine(s) listed in the table on the enclosed list.
WHY IS A RECALL BEING CONDUCTED?
The engine flywheel may be susceptible to detaching from the crankshaft, leading to loss of motive power, which may increase the risk of a crash. Additionally, driveline pieces may be ejected from the engine compartment, which may increase the risk of personal injury.
WHAT ARE WE DOING ABOUT THE PROBLEM?
Cummins has released field Safety Campaign #C2402 “ISX15 CM2250 SN and X15 CM2450 X124B/X154B Flywheel Capscrew Retorque Safety Campaign” to correct this condition by properly torqueing the subject capscrews and inspecting for possible damage and, if necessary, repairing the damage. This campaign is currently available at Cummins Distributors and authorized Warranty Dealers. The repair will be completed free of charge and most applications will require approximately nine hours to complete.
WHAT SHOULD YOU DO?
Contact the nearest Cummins Distributor or authorized Warranty Dealer to arrange to have this campaign performed on your engine. The distributor or dealer will work with you to schedule the best date to complete this repair.
Federal law requires vehicle lessors receiving this recall notice to forward a copy of this notice to the lessee within ten (10) days. Also, it is a violation of Federal law for a dealer to deliver a new vehicle or equipment covered by this recall notice under a sale or lease until the defect has been remedied.
WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS?
If you have questions or concerns about this recall, please contact your local Cummins Distributor or authorized warranty dealer. You may also contact Cummins Care at 1-800CUMMINS (1-800-286-6467), or visit our website at care.cummins.com.
If you have a complaint relative to this recall, you may report it to the following:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
You may also call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
If you have not registered your Cummins product, please complete the enclosed registration card or register your product at https://prodreg.cummins.com/prodreg/#/webform/contactInfo.
If you are no longer the owner of the engine or vehicle listed in the table below, please forward this notice to the new owner or provide the new owner’s contact information to Cummins so that we can notify them of this recall.
Cummins is taking this action in the interest of safety and satisfaction with our products. We apologize for any inconvenience and thank you for your attention to this matter.
Sincerely,
Campaign Administrator Cummins Inc.
21E009 Cummins X15 Diesel Engines Flywheel Capscrews
17 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| KENWORTH | T680 | 2021-2022 |
| KENWORTH | T800 | 2021-2022 |
| KENWORTH | T880 | 2021-2022 |
| KENWORTH | W900 | 2021-2022 |
| KENWORTH | W990 | 2021 |
| PETERBILT | 367 | 2021-2022 |
| PETERBILT | 389 | 2021-2022 |
| PETERBILT | 567 | 2021-2022 |
| PETERBILT | 579 | 2021-2022 |
9 Associated Documents
ISSUED Owner Notification Letter(Part 577)
RCONL-21V080-4564.pdf 505.607KB
Loading...
Reload document 
Open in new tab
Defect Notice 573 Report
RCLRPT-21V080-8111.PDF 214.256KB
Loading...
Recall 573 Report- Amendment 1
RCLRPT-21V080-4428.PDF 214.291KB
Loading...
Recall Acknowledgement
RCAK-21V080-8484.pdf 647.085KB
Loading...
Recall 573 Report- Amendment 2
RCLRPT-21V080-7248.PDF 214.336KB
Loading...
Recall Quarterly Report #1, 2021-1
RCLQRT-21V080-1977.PDF 211.31KB
Loading...
Recall Quarterly Report #3, 2021-3
RCLQRT-21V080-8404.PDF 211.31KB
Loading...
Recall Quarterly Report #2, 2021-2
RCLQRT-21V080-2227.PDF 211.304KB
Loading...
Recall Quarterly Report #4, 2021-4
RCLQRT-21V080-1000.PDF 211.412KB
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V080&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
- 🚗Durable and sturdy: Made of ClD rolled steel, with a surface sprayed with plastic, sturdy and wear-resistant, rust and anti-corrosion, and long service life
- 🚗Good lubrication effect: When the engine starts, the oil stored in the oil pan can be carried to various components of the engine for lubrication, ensuring its good performance
- 🚗Perfect compatibility: Our engine oil pan is a customized product designed specifically for the Freightliner Kenworth Peterbill truck Cummins ISX15.0 X15. Therefore, it can be fully compatible with adjusted models and can be installed directly
- 🚗Accessible installation: The installation operation is simple, and it is strongly recommended for professional personnel to install it
- 🚗After sales service: Our goal is to provide high-quality products and services. If you have any questions, please feel free to contact us and we will reply as soon as possible and solve the problem for you
- FITMENT – Fits for Cummins ISX, X15 Liner Press works on flat-top and grooved-top liners. Alternative to OEM #3164606.
- FUNCTION – Help to install antipolishing rings without damaging the liner and antipolising ring. Work easier to save your time and money!
- SUPERIOR QUALITY – Made form high standard carbon steel which can withstand corrosion, rust and impact, its heavy duty construction ensures an unparalleled long lifespan.
- EASY TO USE – Install our 3164606 cylinder liner installation tool over the antipolishing ring and puller plate. Thread it down slowly, pressing the antipolishing ring into the liner counterbore.
- 100% SATISFACTION GUARANTEE – If you're not 100% satisfied with this Tool, simply return it for a full refund in 30 days. Premium Support & 12-Month Warranty.
- The timing tool kit is specially designed to set gear train timing with single or double camshaft on Cummins engines. Adjust screws on each cylinder by inserting the brake tool between the slave pistons contact surface with the exhaust valve adjusting screw.
- Perfect Compatibility: Compatible with all Cummins Engines 2007-2017. OEM Equivalent Part Number: 3163020; 3163021; 3163069; 3163530.
- 16 Pcs Set Includes: 1pc Crank Pin (3163020), 1pc Cam Gear Puller (3163069), 1pc Jake Brake Tool (7MM) Feeler Gauge, 4pcs Washers, 4pcs Screws and 5pcs Wedge Kits (1pc 4° Wedge; 1pc 5° Wedge; 2pc 6° Wedges; 1pc 7° Wedge). Comes with a portable case, and we prepare a pair of gloves for you, more convenient to use and store.
- Premium Quality: Made of high-quality heavy duty steel with CNC processing, anti-rust and anti-corrosion, wear-resistance, high hardness, strong and not easy to break. With high precision and great compatibility, as accurate as the OEM. Save your time and money.
- 100% CUSTOMER SATISFACTION GUARANTEE: If you are unhappy for any reason or there is some problem with our products, you can get help from us. Customer satisfaction is our top priority.
- ▶️REFERENCE PART NUMBER: 5501185RX, 4034188, 4034429, 4034429RX, 5452695, 5355724, 5356525, 5501185.
- ▶️APPLICATION: For Cummins Isx X15 15 Liter 6.7 CM2350 CM2450 Engines For Dodge Ram 2500 3500 For Freightliner MT45.
- ▶️FUNCTION: A supercharger is a mechanical device that increases the intake pressure of a vehicle's engine, thereby increasing engine output and torque.
- ▶️MATERIAL: High-strength aluminum alloy is usually used as the main material, which has high strength and corrosion resistance.
- ▶️MAINTENANCE: Although a supercharger can improve engine performance to a certain extent, it will also increase fuel consumption and other issues, so it needs reasonable use and maintenance.
- 🚚■Replaces■:LF14000NN, 4367100, LF9080, P559000, LF9001, BD7154, 57746XD, LF-5724.
- 🚚■Compatible■:Compatible With Cummins ISX ISX 15 Engine.
- 🚚■easy to use■:easy to install,Oil Filter is Used to Filter Impurities in Oil,Protect Pump Nozzle,Cylinder Liner,Piston Ring
- 🚚■Get■:1 x Oil Filter
- 🚚:■service■:24-hour service.
- Cylinder Liner Press compatible with Cummins ISX X15 Liner Press. Alternative to part number 3164606.
- Fix our 3164606 Cylinder Liner Press on the antipolishing ring and puller plate. Rotate the bolt to slowly press the cylinder liner into the cylinder bore.
- 3164606 Cylinder Liner Press is made of high-quality and wear resistance carbon steel, after black anodizing and application of precise mechanical design, with high strength, rust resistance, oxidation resistance, and durability.
- Our 3164606 Cylinder Liner Press work easier, you can replace the cylinder liner independently without damaging your cylinder, without spending more effort, time and money.
- We guarantee to provide you with excellent product quality and after-sales.please feel free to contact us.
- 【Fitment】3164606 Cylinder Liner Press Installer fit for Cummins ISX X15 Liner Press.
- 【Replacement】for Cummins ISX X15 Liner Press replaces for part number 3164606, ST-269. Supersedes 3162461.
- 【Function】This isx x15 liner press installer tool works on flat-top and grooved-top liners. This 3164606 liner press tool is designed to install antipolishing rings without damaging the liner and antipolising ring.
- 【Superior Material】Made of high quality solid steel with black anodizing, and application of precise mechanical design, sturdy and durable, impact-resistant, corrosion-resistant. Kit includes 2 Spacers (*5395470). Cylinder Liner Installer Tool ×1.
- 【100% Satisfaction Guarantee】Yoursme committed to providing customers with a good product experience, if you are not satisfied with our products, simply return it for a full refund in 30 days. We support 12 months’ Warranty.
- APPLICATION -- For Cummins ISX Engine 3163530 Jake Brake Feeler Gauge Shim Alt
- OEM # -- 3163530 - 7.0MM. The 7mm area is precision ground to +/- .0005 inch.
- ADVANTAGE -- This angled feeler gauge to allow easier insertion between slave pistons contact surface with the exhaust valve adjusting screw. ( Straight feeler can be bent easily)
- BENEFITS -- Fast, easy and accurate way to check the valve clearance with this feeler gauge. Getting the clearance adjusted is crucial not only for great performance but also to avoid any unwanted catastrophic failures or engine blows.
- A MUST HAVE -- Useful to keep engine noise down and keep your engine performing to it's optimum level.
- Application: Compatible with Cummins ISX engines (2016-2017) and X15, 6 deg wedge is included for 2007-2012 engines with two camshafts.OEM Equivalent Part Number: 3163020; 3163021; 3163069; 3163530
- As Accurate As the OEM: this kit work just as good as the Cummins tool, Everything fit perfectly which allowed you to remove, fix, and put back together and set the timing on ISX QSX engine ! will help you saving thousands in repair costs
- Durable and Strong: This Cummins ISX QSX timing tool made of heavy duty steel, weight 7.98lb, the exterior has been blackened and anti-oxidation, not easy rust
- Kit Include 8pc: 1pc Jake Brake Tool (7MM) feeler gauge; 1pc Cam Gear Puller (3163069); 1pc Crank Pin (3163020); 1pc 4 deg Wedge; 1pc 5 deg Wedge; 2pc 6 deg Wedges; 1pc 7 deg Wedge, and all the tool put in a plastic suitcase, easy to strage
- 12 Months Warranty: We offer 12 months warranty, we will replace or refund, if the tool have any quality problem
Last update on 2024-06-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.