“This site contains affiliate links for which OEMDTC may be compensated” |
December 1, 2020 NHTSA CAMPAIGN NUMBER: 20V744000
If a vehicle strikes the rear of the vacuum excavator, the vehicle may travel under the rear of the vacuum excavator, increasing the risk of injury and/or death.
NHTSA Campaign Number: 20V744
Manufacturer Vac-Tron Equipment, LLC
Components STRUCTURE
Potential Number of Units Affected 38
Summary
Vac-Tron Equipment, LLC is recalling certain 2016-2020 LP873XDT, 2015-2020 LP873SGT, 2019-2020 LPSGT and LPXDT excavator trailers. The trailers are not equipped with a rear impact guard. As such, these trailers fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 224, “Rear Impact Protection.”
Remedy
Vac-Tron will notify owners, and dealers will install a field remedy kit, free of charge. The recall began January 22, 2021. Owners may contact Vac-Tron customer service at 1-877-342-5374. Vac-Tron’s number for this recall is VVK0016.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Background:
INADEQUATE REAR EXTENSION
The trailers do not have an extended lower chassis, reducing rear impact protection and therefore not meeting U.S. Federal Motor Vehicle Standard (FMVSS) governmental regulation 223 for the Unites States.
DEATH OR SERIOUS INJURY POSSIBLE
In the event of a rear impact crash, the other vehicle may travel under the rear of the vacuum excavator, increasing the risk of serious injury or death to someone in the other vehicle or to the towing vehicle occupants. Property or equipment damage may also occur.
Solution:
IMMEDIATE MACHINE MODIFICATIONS REQUIRED
VMV00-0001 has been created to provide the necessary parts and instructions to add a rear chassis extension. This kit must be installed as soon as possible.
Vermeer Corporation is administering this campaign on behalf of Vermeer MV Solutions, Inc.
Please be reminded that it is a violation of federal law for you to sell or lease the machines covered by this notification until this recall has been performed on these machines. Substantial civil penalties apply to violations of this law.
OWNER NOTIFICATION
Sample letter: Included at the end of this bulletin is a sample letter which will be sent by Vermeer Corporation on behalf of Vermeer MV Solutions, Inc. directly to the owners on or about January 21, 2021, via USPS certified/registered mail. Owner registrations indicate no translations are required for this campaign. The owner letter will only be available in English.
This owner notification letter instructs the owner to contact their local dealership to arrange for a time to have the kit installed. After receiving VMV00-0001, you must contact your affected customer(s) immediately and schedule a mutually acceptable time to upgrade their machine.
We regret any inconvenience these corrective measures may cause you. This required work is for safety of the crew, the towing vehicle driver and occupants as well as others traveling on public roadways or in the immediate area while being towed. We hope you agree the safety benefits surpass the inconvenience.
PURPOSE:
The trailers may not have an extended lower rear chassis, reducing rear impact protection and therefore not meeting U.S. Federal Motor Vehicle Standard (FMVSS) government regulation 223 for the United States. In the event of a rear impact crash, the other vehicle may travel under the rear of the vacuum excavator, increasing the risk of serious injury or death to someone in the other vehicle or to the towing vehicle occupants. Property or equipment damage may also occur.
SEOCONTENT-START
SERVICE BULLETIN
Vermeer and the Vermeer logo are trademarks of Vermeer Manufacturing Company in the U.S and/or other
countries. © 2021 Vermeer MV Solutions, Inc. All Rights Reserved.
Page 1 of 6
VERMEER MV SOLUTIONS, INC.
Trenchless
Piedmont, South Carolina 29673 USA
FIELD CAMPAIGN
SERVICE BULLETIN #:
SMV2021-001
DATE: 7 January, 2021
CAMPAIGN
TYPE:
Mandatory-Product Safety
CAMPAIGN
CATEGORY: Kit and Bulletin
MACHINE /
ATTACHMENT
MODEL(S):
SERIAL NUMBERS:
Included Excluded Kit version
Vac-Tron
LP873SDT
See attached listing on page 4
of this bulletin for specific VIN
and Serial/Unit numbers.
N/A VVK01
Vac-Tron
LP873SGT
Vac-Tron
LPSGT
Vac-Tron
LPXDT
Subject:
Rear Extension
Installation Kit
(VMV00-0001)
Background: INADEQUATE REAR EXTENSION
The trailers do not have an extended lower chassis, reducing rear impact protection
and therefore not meeting U.S. Federal Motor Vehicle Standard (FMVSS)
governmental regulation 223 for the Unites States.
PRODUCT
SAFETY
RECALL
FIRST NOTICE
SMV2021-001 7 January 2021 Page 2 of 6
DEATH OR SERIOUS INJURY POSSIBLE
In the event of a rear impact crash, the other vehicle may travel under the rear of the
vacuum excavator, increasing the risk of serious injury or death to someone in the
other vehicle or to the towing vehicle occupants. Property or equipment damage may
also occur.
Solution: IMMEDIATE MACHINE MODIFICATIONS REQUIRED
VMV00-0001 has been created to provide the necessary parts and instructions to add
a rear chassis extension. This kit must be installed as soon as possible.
Vermeer Corporation is administering this campaign on behalf of Vermeer MV
Solutions, Inc.
Please be reminded that it is a violation of federal law for you to sell or lease the
machines covered by this notification until this recall has been performed on these
machines. Substantial civil penalties apply to violations of this law.
DEALER PARTICIPATION
REVIEW REPORT, ORDER KITS, CONTACT CUSTOMERS
1. Reports will be emailed by Vermeer Corporation on behalf of Vermeer MV
Solutions, Inc. during the week of January 7, 2021, to dealerships shown in our
records which have units in their territory affected by this alert. Please review the
report for accuracy, including owner and/or address changes.
If the information contained in the report is NOT correct, please notify the product
safety department on or before January 20, 2021, at:
Telephone: 641-621-7060
Fax: 641-621-8562
Email: productsafety@vermeer.com
2. Dealerships order kits by calling Vermeer MV Solutions – Florida at 888-822-
8766. Each dealership should determine the quantity of kits to order initially
depending upon the number of units that may be available for immediate
upgrade. Do not order more kits than needed for immediate installation.
3. Contact your affected customer(s) to schedule a mutually acceptable time to
upgrade their machine. Note: Letters will be sent to the customer(s) on or about
January 21, 2021. Also refer to Owner Notification section below.
If you have any questions concerning the installation of VMV-0001, please contact the
Vermeer MV Solutions Service Department – Florida.
REIMBURSEMENT
Upon completion of each kit installation, a campaign warranty claim must be
submitted to the Vermeer Corporation warranty department for reimbursement of the
parts cost and labor installation.
This kit will reimburse 4.0 hours of labor.
Note: Future notices to dealers and owners are dependent upon the receipt of
warranty claims by Vermeer Corporation warranty department.
OWNER NOTIFICATION
Sample letter: Included at the end of this bulletin is a sample letter which will be sent
by Vermeer Corporation on behalf of Vermeer MV Solutions, Inc. directly to the
owners on or about January 21, 2021, via USPS certified/registered mail. Owner
SMV2021-001 7 January 2021 Page 3 of 6
registrations indicate no translations are required for this campaign. The owner letter
will only be available in English.
This owner notification letter instructs the owner to contact their local dealership to
arrange for a time to have the kit installed. After receiving VMV00-0001, you must
contact your affected customer(s) immediately and schedule a mutually acceptable
time to upgrade their machine.
We regret any inconvenience these corrective measures may cause you. This
required work is for safety of the crew, the towing vehicle driver and occupants as
well as others traveling on public roadways or in the immediate area while being
towed. We hope you agree the safety benefits surpass the inconvenience.
VERMEER MV SOLUTIONS, INC.
Attachment:
VMV00-0001 Kit Instructions
Completion Schedule:
Product Safety Alert: Install immediately
90 days from MM/DD/YYYY
180 days from MM/DD/YYYY
1 year from MM/DD/YYYY
Only Units within Standard Limited
Warranty Period
N/A
Reimbursement:
Product Safety Alert
All Units Listed Above
Parts Labor Paid (Labor Code: SB21)
Only Units within Standard Limited Warranty
Period
No Reimbursement
Internal Reference:
TREAD Act Code
(Choose one or
more applicable
codes)
— Not applicable 12 Exterior lighting
02 Suspension 16 Structure
03 Service brake system, hydraulic 17 Latch
04 Service brake system, air 19 Tires
05 Parking brake 20 Wheels
11 Electrical 21 Trailer hitch
SMV2021-001 7 January 2021 Page 4 of 6
AFFECTED MACHINES – VMV01-0001
MODEL VIN SERIAL/UNIT MODEL VIN SERIAL/UNIT
LP873SGT 5HZBF1922GLBG2108 161047 LP873XDT 5HZBF1922HLBH2123 171089
LP873SGT 5HZBF1924JLFJ2219 181452 LP873XDT 5HZBF1929GLDG2127 161108
LP873SGT 5HZBF1929FLGF2138 151172 LP873XDT 5HZBF1921HLKH2212 171438
LP873SGT 5HZBF1928HLGH2173 171232 LP873XDT 5HZBF1923HLLH2232 171536
LP873SGT 5HZBF192XHLGH2174 171233 LPSGT 5HZH19224KK002006 191307
LP873SGT 5HZBF1925HLGH2177 171293 LPSGT 5HZH19226KK002007 191308
LP873SGT 5HZBF1924GLHG2161 161244 LPSGT 5HZH19228KK002008 191309
LP873SGT 5HZBF1926GLHG2162 161245 LPSGT 5HZH1922XKK002009 191310
LP873SGT 5HZBF1928GLHG2163 161263 LPSGT 5HZH19226KK002010 191335
LP873SGT 5HZBF1924GLJG2169 161275 LPSGT 5HZH19225KK002015 191392
LP873SGT 5HZBF1920GLJG2170 161276 LPSGT 5HZH19223LK002032 191679
LP873SGT 5HZBF1924GLJG2172 161282 LPSGT 5HZH19221LK002045 191804
LP873SGT 5HZBF1928GLJG2174 161296 LPXDT 5HZJ19234KK002016 191402
LP873SGT 5HZBF1923HLJH2208 171442 LPXDT 5HZJ19236KK002017 191403
LP873SGT 5HZBF192XGLLG2182 161333 LPXDT 5HZJ19231KK002023 191426
LP873XDT 5HZJ1923XLK002085 191764 LPXDT 5HZJ19235LK002088 191765
LP873XDT 5HZJ19235LK002088 191765 LPXDT 5HZJ1923XLK002104 191801
LP873XDT 5HZBF1929GLAG2104 161051 LPXDT 5HZJ19233LK002137 191802
LPXDT 5HZJ19239LK002143 200035
Vermeer and the Vermeer logo are trademarks of Vermeer Manufacturing Company in the U.S and/or other
countries. © 2021 Vermeer MV Solutions, Inc. All Rights Reserved.
Page 5 of 6
PRODUCT SAFETY
DEPARTMENT
Vermeer Corporation on behalf
of Vermeer MV Solutions, Inc.
productsafety@vermeer.com
January 21, 2021
VIA USPS CERTIFIED/REGISTERED MAIL
Dear «MODEL» Owner:
This notice is sent to you in accordance with the requirements of the U.S. National Traffic and Motor Vehicle
Safety Act.
Vermeer MV Solutions, Inc. has decided that a defect, that relates to motor vehicle safety, exists in certain
model year 2016–2020 Vac-Tron «MODEL» vacuum excavator trailers. According to our records, you currently
own a Vac-Tron «MODEL» vacuum excavator. The Model and Serial Number of the «MODEL» is shown at the
top right of this letter.
INADEQUATE REAR EXTENSION
The trailers do not have an extended lower chassis, reducing rear impact protection and therefore not meeting
U.S. Federal Motor Vehicle Standard (FMVSS) governmental regulation 223 for the Unites States.
DEATH OR SERIOUS INJURY POSSIBLE
In the event of a rear impact crash, the other vehicle may travel under the rear of the vacuum excavator,
increasing the risk of serious injury or death to someone in the other vehicle or to the towing vehicle
occupants. Property or equipment damage may also occur.
IMMEDIATE MACHINE MODIFICATIONS REQUIRED
VMV00-0001 has been created to provide the necessary parts and instructions to provide the necessary parts
and instructions to add a rear chassis extension. This kit must be installed as soon as possible.
Please be reminded that it is a violation of Federal law for you to sell or lease the machines covered by this
notification until this recall has been performed on these machines. Substantial civil penalties apply to
violations of this law.
Please contact your authorized, independent Vermeer dealer immediately to arrange a mutually acceptable
time and location to install VMV00-0001 at no cost to you for labor or materials. The installation of this kit is
estimated at 4 hours of labor. If the Vermeer dealer travels to the unit to install the kit, costs may be incurred
by the owner. You must have your machine upgraded for these safety features.
Contact your local Vermeer dealer: «Service_Dealer_Name»
«Serv_Dealer_Add1» «Serv_Dealer_Add2»
«Serv_Dealer_City» «Serv_Dealer_St» «Serv_Dealer_Zip»
«SERV_DEALER_COUNTRY»
Telephone: «Serv_Dealer_Phone»
IMPORTANT
SAFETY
RECALL
First Notice
Rear Extension Installation
Kit (VMV00-0001)
Model: «Model»
This notice applies to your vehicle,
Serial No: «VIN»
Unit No: «Unit No»
SMV2021-001 7 January 2021 Page 6 of 6
If you no longer own this unit, please notify Vermeer Corporation’s Product Safety Department at:
Toll-free: 800-829-0051, option 1
Telephone: 641-621-7060
Email: productsafety@vermeer.com
If possible, please provide the name and address of the new owner.
We regret any inconvenience that these corrective measures may cause you. This required work is for safety
of the towing vehicle driver and occupants as well as others traveling on public roadways or in the immediate
area while being towed. We hope that you agree that the safety benefits surpass the inconvenience.
Sincerely,
VERMEER MV SOLUTIONS, INC.
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice
to the lessee within ten (10) days.
If the authorized dealer has failed or is unable to remedy the defect without charge and within a reasonable
time, contact Vermeer MV Solutions, Inc. through Vermeer Product Safety by email at
productsafety@vermeer.com or by calling 800-829-0051 or 641-621-7060. You may also submit a complaint to
the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington,
D.C. 20590 or call the Vehicle Safety Hotline at 888-327-4236 (TTY: 1-800-424-9153); or go to
https://www.safercar.gov.
*******************************************************************************************************
Vermeer and the Vermeer logo are trademarks of Vermeer Manufacturing Company in the U.S and/or other
countries. © 2021 Vermeer MV Solutions, Inc. All Rights Reserved.
Page 1 of 12
FIELD KIT
Vermeer MV Solutions, Inc.
Trenchless
Piedmont, South Carolina 29673 USA
FIELD CAMPAIGN KIT #: VMV00-0001 DATE: 7 January 2021
For Dealer Reference: Service Bulletin #SMV2021-001
Rear Extension Installation Kit
CAMPAIGN
TYPE: Mandatory – Product Safety
CAMPAIGN
CATEGORY:
Kit and Bulletin
MACHINE /
ATTACHMENT
MODEL(S):
SERIAL NUMBERS:
Included Excluded Kit version
Vac-Tron
LP873SDT
See attached listing on page 9
of this kit for specific VIN and
Serial/Unit numbers.
N/A VMV01
Vac-Tron
LP873SGT
Vac-Tron
LPSGT
Vac-Tron
LPXDT
PURPOSE:
The trailers may not have an extended lower rear chassis, reducing rear impact protection and
therefore not meeting U.S. Federal Motor Vehicle Standard (FMVSS) government regulation 223 for the
United States. In the event of a rear impact crash, the other vehicle may travel under the rear of the
vacuum excavator, increasing the risk of serious injury or death to someone in the other vehicle or to
the towing vehicle occupants. Property or equipment damage may also occur.
PRODUCT
SAFETY ALERT
VMV000001 7 January 2021 Page 2 of 12
SPECIAL TOOLS AND CONDITIONS:
Use suitable lifting device when installing rear extension. Rear extension weight is
approximately 120 lb (54.4 kg)
Shutdown Procedure (LP Units)
STOPPING THE MACHINE
For your safety and the safety of others, follow shutdown procedure before working on the
machine for any reason, including servicing, maintaining, cleaning, inspecting, unclogging, or
transporting machine, or as otherwise directed in operator’s manual.
Step 1: Make sure end of vacuum hose is clear of all spoils, debris, and other materials.
Step 2: Turn Water Pump Switch to OFF.
Step 3: Push Throttle Switch to SLOW. Idle engine five minutes to allow vacuum pump to cool
down. This helps to prevent the buildup of condensation.
Step 4: Turn Key Switch to OFF to shut off engine. Remove key.
Step 5: Pull trigger on any high‐pressure water tool to relieve line pressure.
WARNING: Do not point high‐pressure water tool in the direction of
people when relieving the pressure.
VMV000001 7 January 2021 Page 3 of 12
Procedure 1: Weld Supports
1. Refer to Figure 1 for parts list.
2. Grind off the paint and rust where the cross members provided are to be installed.
Refer to the figure in Step 3.
3. Position the reinforcement members (1) as indicated below.
4. Place 1/4” [6 mm] fillet welds as indicated.
VMV000001 7 January 2021 Page 4 of 12
VMV000001 7 January 2021 Page 5 of 12
5. Remove any damaged paint down to the base metal. Repaint the affected areas
as needed.
VMV000001 7 January 2021 Page 6 of 12
PROCEDURE 2:
1. Refer to Figure 2 for parts list.
2. Ensure the debris tank is empty. Using suitable blocking, block debris tank to
prevent shifting. Debris tank weighs approximately 1,000 lb.
3. Remove the cotter pin on both sides (A).
4. Push the headed pins out to be flush with the inner side of the tank hinges. Be
careful not to push the pins through the hinges.
B
A
VMV000001 7 January 2021 Page 7 of 12
5. Use a suitable lifting device when installing the extension. Extension weight is
approximately 120 lb.
6. Raise the extension (1) into position. Push the headed pins (B) back into position
and reinstall the cotter pins (A). Install the fastening hardware.
PROCEDURE 3:
1. Refer to Figure 3 for parts list.
2. Clean areas where the conspicuity tape, decals, and reflectors will be applied with
light soap and water and allow to dry thoroughly.
3. Apply the conspicuity tape (1) and reflectors (2) as shown. Trim excess tape length
if needed.
1
1
1
1
2
2
VMV000001 7 January 2021 Page 8 of 12
4. Place one decal (3) on the curb side water tank, one decal on the curb side engine
enclosure, and one decal on the top side of the rear extension as shown.
3
3 3
VMV000001 7 January 2021 Page 9 of 12
AFFECTED MACHINES – VMV01-0001
MODEL VIN SERIAL/UNIT MODEL VIN SERIAL/UNIT
LP873SGT 5HZBF1922GLBG2108 161047 LP873XDT 5HZBF1922HLBH2123 171089
LP873SGT 5HZBF1924JLFJ2219 181452 LP873XDT 5HZBF1929GLDG2127 161108
LP873SGT 5HZBF1929FLGF2138 151172 LP873XDT 5HZBF1921HLKH2212 171438
LP873SGT 5HZBF1928HLGH2173 171232 LP873XDT 5HZBF1923HLLH2232 171536
LP873SGT 5HZBF192XHLGH2174 171233 LPSGT 5HZH19224KK002006 191307
LP873SGT 5HZBF1925HLGH2177 171293 LPSGT 5HZH19226KK002007 191308
LP873SGT 5HZBF1924GLHG2161 161244 LPSGT 5HZH19228KK002008 191309
LP873SGT 5HZBF1926GLHG2162 161245 LPSGT 5HZH1922XKK002009 191310
LP873SGT 5HZBF1928GLHG2163 161263 LPSGT 5HZH19226KK002010 191335
LP873SGT 5HZBF1924GLJG2169 161275 LPSGT 5HZH19225KK002015 191392
LP873SGT 5HZBF1920GLJG2170 161276 LPSGT 5HZH19223LK002032 191679
LP873SGT 5HZBF1924GLJG2172 161282 LPSGT 5HZH19221LK002045 191804
LP873SGT 5HZBF1928GLJG2174 161296 LPXDT 5HZJ19234KK002016 191402
LP873SGT 5HZBF1923HLJH2208 171442 LPXDT 5HZJ19236KK002017 191403
LP873SGT 5HZBF192XGLLG2182 161333 LPXDT 5HZJ19231KK002023 191426
LP873XDT 5HZJ1923XLK002085 191764 LPXDT 5HZJ19235LK002088 191765
LP873XDT 5HZJ19235LK002088 191765 LPXDT 5HZJ1923XLK002104 191801
LP873XDT 5HZBF1929GLAG2104 161051 LPXDT 5HZJ19233LK002137 191802
LPXDT 5HZJ19239LK002143 200035
VMV000001 7 January 2021 Page 10 of 12
Figure 1
FIGURE 1 Parts List
REF.
NO. PART NO. DESCRIPTION VVK01
QTY.
1 S400-5761 REINF. MEMBER 2
VMV01 includes all items from Figure 1 parts list.
1
VMV000001 7 January 2021 Page 11 of 12
Figure 2
FIGURE 2 Parts List
REF.
NO. PART NO. DESCRIPTION VVK01
QTY.
1 135500205 REAR EXTENSION 1
2 135500218 1-8 X 6-1/2 HEX BOLT 2
3 P-3827 1 ID FLAT WASHER 4
4 P-2626 1-8 PREVAILING TORQUE NUT 2
VMV01 includes all items from Figure 2 parts list.
3
2
2
3 4
3
4
3
1
VMV000001 7 January 2021 Page 12 of 12
Figure 3
FIGURE 3 Parts List
REF.
NO. PART NO. DESCRIPTION VVK01
QTY.
1 P-0485 25” LENGTH 2” WIDE CONSPICUITY TAPE 1
2 135500470 RED REFLECTIVE STICKER 2
3 7000H799 DEBRIS TANK DOOR NOTICE 3” X 7” 3
VMV01 includes all items from Figure 3 parts list.
3
2
1
SEOCONTENT-END
15 Affected Products
Vehicles
MAKE | MODEL | YEAR |
VAC-TRON | LP 873 SGT | 2015-2020 |
VAC-TRON | LP 873 XDT | 2016-2020 |
VAC-TRON | LPSGT | 2019-2020 |
VAC-TRON | LPXDT | 2019-2020 |
10 Associated Documents
Recall 573 Report- Amendment 1
RCLRPT-20V744-5434.PDF 217.071KB
Noncompliance Notice 573 Report
RCLRPT-20V744-6613.PDF 216.927KB
Recall Acknowledgement
RCAK-20V744-9270.pdf 244.729KB
Recall Quarterly Report #2, 2021-2
RCLQRT-20V744-5035.PDF 211.227KB
Remedy Instructions and TSB
RCRIT-20V744-0770.pdf 1707.353KB
Miscellaneous Document- Before and After
RMISC-20V744-4421.pdf 522.148KB
Recall Quarterly Report #1, 2021-1
RCLQRT-20V744-7138.PDF 211.127KB
Safety Bulletin
RCSB-20V744-9791.pdf 338.947KB
Recall 573 Report- Amendment 2
RCLRPT-20V744-8239.PDF 217.09KB
Recall Quarterly Report #3, 2021-3
RCLQRT-20V744-3267.PDF 211.308KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V744&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- 🚘WARNING: Intended to be used on parked vehicles ONLY. Never drive with the BumperButler attached; using the BumperButler while driving may leave scratches on your car's exterior.
- 🚘Dimensions: 43 X 11 inches
- 🚘Easy installation with adjustable straps and hook to inside of your trunk. Folds into your trunk cargo area with ease when not in use. Loose dirt can be shaken out or vacuumed, and hard soiled areas can be hosed down with water and allowed to dry
- 🚘Patented, durable, and long-lasting rubber design; Fits most sedan vehicles. Strong security straps help deter theft and add extra sturdiness
- 🚘High-Intensity Safety Reflectors make the Bumper Butler stand out to vehicles parking behind you and helps make your vehicle noticeable in emergency situations
- High-quality material: High-quality soft and environmentally friendly material, reducing external impact, durable and scratch-resistant, flexible and flexible, and full of toughness.
- Excellent performance: Anti-scratch, abrasion resistance, anti-aging, groove anti-skid design, effectively prevent items from falling, and provide protection for scratches.
- Easy to install: After cleaning the location that needs to be installed, it can be installed privately without drilling or welding.
- Wide range of application: The newly upgraded 41x3.5 inches is suitable for most models such as SUVs and trucks. Please measure the size of the installation location before purchasing.
- Buy with confidence: If you have any questions, please contact us, we are always at your service.
- SUPER WIDE Bumper Protection Area; The Largest Bumper Protector!
- PREMIUM Grade Rubber Material
- Patented Stabilizer Bars Keep The BumperBully FLAT Against Your Bumper
- PREMIUM Grade Rubber Material (PVC FREE)
- Added protection against scuffs, nicks, scratches, and other damaging marks
- Textured surface provides slip resistance
- Quick and easy no-drill installation with the use of self-adhering 3M Tape
- Attaches directly to your rear bumper
- To ease concerns about fitment, use the size variations above to see images of our bumper protector on your vehicle
- Fits select 2020-2024 Toyota Highlander, 2020-2024 Toyota Highlander Hybrid Models. Please confirm fitment to your year, make, and model in Amazon Garage prior to purchase.
- Coverage: Rear Bumper, Color: Black
- Safeguard your rear bumper from scratches, paint chipping, and everyday wear and tear with the WeatherTech BumperTopper. Made from an impact-resistant hard plastic, it stands up to damage. When it’s time to trade your vehicle in, BumperTopper also helps cover small scuffs and blemishes to protect resale value.
- BumperTopper attaches directly to your bumper’s surface with Very High Bond adhesive strips. A Center Indication Mark makes installation quick, easy and accurate. This rear bumper cover hugs the profile of your vehicle’s bumper for custom-fit protection. BumperTopper is thin enough (3mm) to allow complete closure of your trunk or hatchback, yet tough enough to protect your vehicle.
- Made in USA!
- 🚘[PACKAGE INCLUDES] 1 BumperButler
- 🚘[DIMENSION] 43 x 11 inches
- 🚘[DURABLE AND MADE TO LAST] Our rubber design is not only durable and long-lasting, but it also fits most sedan vehicles. This means that you can trust our product to provide reliable protection for your vehicle for years to come, no matter what sedan you drive. So, if you're looking for a product that is both versatile and built to last, look no further than our rubber design.
- 🚘[EASY INSTALLATION] Installing our product is a breeze thanks to its adjustable straps and hook that attach to the inside of your trunk. This means that you can easily secure it in place and start using it right away. Plus, when you're not using it, it conveniently folds up and can be stored in your trunk cargo area without taking up too much space. So, whether you're using it frequently or just occasionally, our product is designed to be hassle-free and easy to use.
- 🚘[EASY TO CLEAN] Our product is durable and versatile. This means that you can rest assured that it will stay looking great even after repeated use. Additionally, it's easy to clean - loose dirt can be shaken out or vacuumed, and hard-soiled areas can be hosed down with water and allowed to dry. So, whether you're dealing with everyday dirt or a more serious mess, our product is designed to make cleaning a breeze.
- Universal Fit for All Cars: Ensure a flawless match with our TrexNYC bumper guard, universally designed to fit bumper guards for cars of all sizes. Experience the perfect blend of style and protection for your vehicle.
- High-Quality, Weather-Resistant Material: Crafted from premium, high-density foam, our bumper guard is an impenetrable shield against parking-related mishaps. Measuring just 1/4 inch thick, it's a sleek and durable solution to safeguard your car bumper.
- Effortless Installation, Instant Peace of Mind: Weighing only 1.5 lb., the lightweight design of our rear bumper car protector ensures easy installation, providing instant protection and peace of mind. No more worrying about dings, dents, or scratches while parking.
- Protection for Your Vehicle: Enjoy comprehensive coverage with our extra-wide (72-inch) bumper guard that wraps around the corners of your car. This ensures complete protection, making it an ideal choice for bumper guards for cars seeking maximum security.
- Secure and Adjustable Placement: Rest easy knowing your bumper guard is securely fastened with two Velcro straps attached to your trunk's carpet. Adjustable straps provide convenience, allowing you to customize the fit. Whether you opt for side straps or not. Our bumper guard protection is for your car bumper.
- Fits select 2016-2022 Honda Pilot Models. Please confirm fitment to your year, make, and model in Amazon ConfirmedFit prior to purchase.
- Coverage: Rear Bumper, Color: Black
- Safeguard your rear bumper from scratches, paint chipping, and everyday wear and tear with the WeatherTech BumperTopper. Made from an impact-resistant hard plastic, it stands up to damage. When it’s time to trade your vehicle in, BumperTopper also helps cover small scuffs and blemishes to protect resale value.
- BumperTopper attaches directly to your bumper’s surface with Very High Bond adhesive strips. A Center Indication Mark makes installation quick, easy and accurate. This rear bumper cover hugs the profile of your vehicle’s bumper for custom-fit protection. BumperTopper is thin enough (3mm) to allow complete closure of your trunk or hatchback, yet tough enough to protect your vehicle.
- Made in USA!
- Fits select 2017-2024 Mazda CX-5 Models. Please confirm fitment to your year, make, and model in Amazon ConfirmedFit prior to purchase.
- Coverage: Rear Bumper, Color: Black
- Safeguard your rear bumper from scratches, paint chipping, and everyday wear and tear with the WeatherTech BumperTopper. Made from an impact-resistant hard plastic, it stands up to damage. When it’s time to trade your vehicle in, BumperTopper also helps cover small scuffs and blemishes to protect resale value.
- BumperTopper attaches directly to your bumper’s surface with Very High Bond adhesive strips. A Center Indication Mark makes installation quick, easy and accurate. This rear bumper cover hugs the profile of your vehicle’s bumper for custom-fit protection. BumperTopper is thin enough (3mm) to allow complete closure of your trunk or hatchback, yet tough enough to protect your vehicle.
- Made in USA!
Last update on 2024-04-14 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.