December 1, 2020 NHTSA CAMPAIGN NUMBER: 20V745000
If the control panel stops functioning, a delay in emergency services may occur, increasing the risk of injury.
NHTSA Campaign Number: 20V745
Manufacturer Halcore Group, Inc.
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 251
Halcore Group, Inc. (Halcore) is recalling certain 2020 Horton Emergency Vehicles Type I and III and ambulances equipped with Weldon i4G Vivtech Displays. The processor that runs the display may stop functioning without warning, causing items operated through the control panel to not function.
Halcore will notify owners, and dealers will inspect and repair the i4G Vivtech rear and/or front display within the serial number range, free of charge. The recall began December 8, 2020. Owners may contact Halcore customer service at 1-800-447-0343.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
2 Affected Products
2 Associated Documents
Defect Notice 573 Report
Latest Recalls Documents
For the most up to date documents from NHTSA for this Recall, click the lick above
- 3 in 1 battery voltage meter - With a switched function button to choose the battery capacity, real-time voltage or turn off; New alarm function, when the battery capacity is lower 20%, the screen display will flash to alarm.(Note: package only include 1 battery meter!)
- Universial battery status monitor - wide working voltage input range DC 12V-84V.Can be automatically detect to the accurate voltage according to the battery voltage.
- Suitable for various battery types - fits to 12V/24V/36V/48V/60V/72V/84V lead acid battery, Ternary Lithium battery, Polymer lithium-ion battery, 3-15 series Lithium ion battery, Storage battery, Water battery, etc. (Note: it cannot be used for Lithium Iron Phosphate batteries, 1-2 Li batteries in series and over 15 Li batteries in series.)
- Sensitive LCD digital display - the small battery voltage reader with a PVC waterproof screen poterctor, clear and bright green backlight LCD display from any angle; Low working power consumption(5mA max), in additional there's a turn off button for it.
- Multifunctional application - suitable for (Yamaha) golf cart, RV, marine, boat, (EZGO) club car, motorcycle, car, bike, ebike, scooter, truck, vehicle, jet ski, forklift
- 🌟【Portable & Accurate】: LNEX automotive battery meter equipped with high precision current detector which provides very accurate voltage and current with a single meter. It also boasts a programmable percent-of-charge meter and built-in light that turns off automatically when there is no load.As well,Lightweight design makes it easy to carry and store.
- 🌟【High Low Capacity Alarm】: With High low capacity alarm function,our RV battery monitor will alarm and backlight and voltage value will flash simultaneously, when your battery capacity is low or high to protect the batteries from getting over-discharged.and it designed to automatically store the last testing data when system shuts off.
- 🌟【Easy To Install】 : Our current voltage multimeter as with all shunts, the negative to battery and load are clearly marked makes Installation of the shunt and display was very easy. Pure brass and heavy duty connectors/nuts/bolts make our battery monitor with shunt very well built and robust.
- 🌟【Easy To Read】: LNEX car battery monitor provides the necessary information for battery including charge, discharge, amp and wattage usage. Shows timing remaining on current dissipation in one display without having to scroll through windows. Everything is displayed on the large color screen, it is very easily readable and the display is well lit for reading in light and dark conditions.
- 🌟【Universal Battery Monitor】: Our 12V battery monitor tests multiple electronic parameters (Voltage, Current, Consumed Power and Battery Capacity),with the Voltage range 10V-120V and up to 500A and compatible with various types of battery: Lead Acid, Lithium Iron Phosphate, Lithium-ion, Nickel-metal hybrid.Attached with 26ft Shielded cable allows you to monitor the battery status from distance.
- Universal battery Voltage Meter - wide voltage input range DC 12V-48V Lead-acid Batteries and 2S-15S Lithium Batteries: Ternary lithium batteries, polymer batteries, lithium-ion batteries, storage batteries.
- Universal Power Button - This battery Voltage Meter has universal power button, which can be used to set the battery model and string numbers of batteries.
- High Quality Battery Voltage Meter - Large LCD screen display with green backlit and low power consumption.Two display modes can be available: battery symbol and battery percentage, battery symbol and voltmeter.and the liquid crystal electric quantity is 70% lower than that of the conventional digital tube.
- Safety to Use - Battery Voltage Meter with Built-in 30cm power cable, simple to connect. Reverse protection design, won't burn if connect reversely.With mounting screws, no additional parts are required to save costs.
- Portable& Wide application Battery Voltage Meter - Small size, light weight, equipped with a PVC film.The battery capacity indicator meter can be used in various instruments and meters¡portable device¡mobile power¡medical equipment¡electrombile etc.
- APPLICABLE BATTERY --- DROK digital battery monitor is suitable for 10-100V (12v 24v 36v 48v 60v 72v 96v) lithium battery, lead-acid battery, lithium iron phosphate battery, Ni MH battery. Default 12 volt lead acid battery.
- APPLICATION --- this multimeter can be used as battery voltage meter, battery capacity tester and temperature indicator panel for car, marine, RV, boat, etc.
- PROTECTION --- the battery power detector comes with protective shell, dustproof waterproof surface; input reverse connection protection.
- LCD DISPLAY --- the battery status reader adopts clear LCD color screen, displays battery capacity, voltage, temperature value(switched by the key).
- ALARM --- if low voltage, red indicator flashes and buzzer alarms.
- 【CAR BATTERY MONITOR】ANCEL BM300 bluetooth battery monitor is designed for all 12V batteries. It can do voltage test, charging test, cranking test and trip recording on your vehicles. And the car battery tester only use very little power from the battery. Simply have a check before you go out without hassles on the road.
- 【12V DIGITAL BATTERY TESTER】With Bluetooth 4.0, the free app ANCEL Battery Charge Monitor 12V RV can connect with the battery in milliseconds. Moreover, the real-time notification will notify you when the battery is dropping with the accurate voltage readings, which you can check it on your phone conveniently.
- 【VERSATILE BATTERY ANALYZER】 The battery load monitor BM300 is compatible with all 12V batteries, including regular flooded, AGM flat plate, AGM spiral, and GEL batteries for vehicles, forklifts, hybird cars, SUVs, Pickups, Boats, RVs, Motorcycles, travel Trailers, and even Solar Power Systems.
- 【COMPACT & CONVENIENT】The 3.2 ounces upgraded version of Bluetooth voltmeter BM300 is very compact, which won’t take you much space. And you don’t have to press any annoying buttons to check the data. You just need to fix it to your battery, go back to your seat and check your phone.Please note that you should be within the range (33 feet).
- 【SECURE CAR BATTERY TESTER】The reverse-polarity protection design and fireproof material can keep you safe and sound. The device will automatically monitor the vehicle's battery, cranking and charging systems, which can store up to 31 days of data. Now get one and monitor the battery health yourself! At the same time, it is also the perfect Valentine's Day Gift for your family and friends.
- 1.9 in 1 Measuring Type/Range:Voltage 0-200V,Current 0-100A,Power 0-20000W,Impedance 0-1000Ω,Internal Resistance 0-999mΩ,Capacity 0-1000AH,Dump energy 0～9999kWh,Running time 0-999 hour.
- 2.LCD Display:Large-screen LCD with a full sight of 180° view,The blue backlight can be turned on/off manually.
- 3.Two modes: normal display mode and dormant mode.
- 4.No screws design: Press down terminal buttons, insert bare thread and release.
- 5.Wildly application:DC multifunction battery meter wildly applied to solar system/industrial assembly line/Automobile/RV etc.
- Please reasonable choice voltmeter before you purchase,And the motocycle battery is 48V,It will lead the Voltage reading is incorrect.
- Range:5V-30V.Waterproof design, mounts in a 1-1/8" hole in panels up, 0.25" thick, a nylon retaining nut holds the meter in place. Twist-and-Lock system. Mini size and easy to install, great for checking Voltage.
- The indicator in the middle will twinkle to alarm when the voltage is more than 15V for DC 12V battery ,it will twinkle to alarm when the voltage is more than 30V for DC 24V battery.
- Used to monitor the storage-battery voltage, with reverse connection protection. Timely grasp the state of your battery between full charged and discharged.Voltage measurement purposes can also be used for other products.include 2 short wires for installation
- High Grade Flame Retardant Materials, IP65 Waterproof, CE and Rohs Certify, Totally Environment Friendly;Universal fits most DC 12-24V Motorbike Car / Boat / ATV / UTV / Camper / Caravans / Travel Trailer etc.
- ✿【Features】LCD screen with green backlit.Equipped with a PVC film, the surface is waterproof.Built with buckle, free of screw installation. Battery capacity and voltage meter.Universal battery capacity meter, need to set up by yourself.
- ✿【Functions】1. Manually switch battery percentage / voltage / power off；2. Automatic recycling display battery capacity / voltage per 2 seconds (Settable)；3. 10s delay auto off (Settable)；4. Double discharge curve selection (Settable)
- ✿【Note】Only support 12-48V battery, such as 12V P01 lead-acid battery, P04 lead-acid battery, and please note this item DOES NOT support 6V lead-acid battery.
- ✿【Setting Instruction】1. Long press the Set key, power supply to the product, enter the setup interface；2. Press the Set key to select the battery specification (Lead acid battery(P), Lithium battery (L), Fe battery(F))；3. Short press the Function key to select the number of battery strings (increasing for set button, decreasing for function button)；4. Long press the Function key to set s mode.
- ✿【Specifications】Color: Black；Material: HTN / PCB；Size: Approx. 61.3 * 33.3 * 13.5 / 2.4 * 1.3 * 0.5in；Voltage: 6-70 (V)；Applicable scope: Battery or battery equipment；Storage temperature: -10 ~ 50℃
- The Victron Energy BMV-712 Smart Battery Monitor (Grey) is a high precision smart battery monitor, specially designed for systems with battery voltage ranging from 6.5 - 70 VDC
- Midpoint Voltage Monitoring: The BMV-712 features an additional input which can be programmed to measure the voltage of a second battery, battery temperature or midpoint voltage - This feature, which is often used in industry to monitor large and expensive battery banks, is now for the first time made available at a low cost, to monitor any battery bank
- Built-in Bluetooth Communication - Monitor your batteries on Apple or Android smartphones, tablets, macbooks, and other devices
- Battery monitor comes with a BMV shunt 500A/50mV and Next to the basic display options, such as voltage, current, and ampere-hours consumed, the BMV-712 also displays state of charge, time to go, and power consumption in watts
- Easy to Program - A quick install menu and a detailed setup menu with scrolling texts assist the user when going through the various settings. Incorrect installation can be hazardous, Please consult a licensed professional and follow all applicable electrical codes during installation
Last update on 2021-10-20 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2021-10-20 / Affiliate links / Images from Amazon Product Advertising API