| “This site contains affiliate links for which OEMDTC may be compensated” |
October 8, 2020 NHTSA CAMPAIGN NUMBER: 20V624000
An unexpected loss of propulsion without the ability to restart may increase the risk of a crash.
NHTSA Campaign Number: 20V624
Manufacturer Harley-Davidson Motor Company
Components ELECTRICAL SYSTEM
Potential Number of Units Affected 1,012
Summary
Harley-Davidson Motor Company (Harley-Davidson) is recalling certain 2020 LiveWire (ELW) motorcycles. The electric vehicle powertrain may unexpectedly shut down and not restart, due to a software issue in the Onboard Charging (OBC) system.
Remedy
Harley-Davidson will notify owners, and dealers will update the OBC software, free of charge. The recall began October 19, 2020. Owners may contact Harley-Davidson customer service at 1-800-258-2464. Harley-Davidson’s number for this recall is 0176.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Indian Motorcycle Recalls
2020-10-15
M1519: RECALL 0176 – LIVEWIRE – SOFTWARE UPDATES
Purpose for Service Bulletin
Harley-Davidson has learned that software in the Onboard Charger (OBC), used on 2020 Electric LiveWire™ (ELW) models may initiate a shutdown of the Electric Vehicle Powertrain (EVPT). This shutdown may happen without providing reasonable indication to the rider that a shutdown sequence has been initiated. In some cases, the vehicle may not be able to restart or, if restarted, may shortly thereafter shut down again. Unexpected loss of propulsion while in motion without the ability to restart or remain restarted may increase the risk of a crash.
While the customer’s vehicle is at the dealer to have the recall remedy performed, in the interest of improving the riding and charging experience for the customer, also install updates to the Instrument Module (IM) and the EVPT.
NOTE
Recall 0176 can only be preformed by a certified ELW dealer.
Motorcycles Affected
2020 ELW built between March 18, 2019 and August 20, 2020.
Markets Affected
All markets are affected.
Required Dealer Action
This recall, the customer (upon request) has the option to have the vehicle picked-up and/or delivered back to them at no cost to them. The dealer is compensated for this service on this bulletin. Refer to Table 4 or Table 6.
Perform the updates in the following order:
NOTE
Reimbursement for software installs includes prepping the vehicle, Digital Technician II (DT II) setup, triggering, and verifying the installation. Reimbursement does not apply to the time while DT II is uploading the software to the vehicle.
- VSC Update
- Reflash time on the Vehicle Supervisory Controller (VSC) takes approximately 8 min.
- OBC Update
- Reflash time on the OBC takes approximately 30 min.
- IM Update
- Reflash time on the IM takes approximately 10 min.
1. Verify that vehicle is part of recall 0176.
a. H-Dnet.com > FAVORITES > MY TOOLBOX > Vehicle Information
b. Enter the Vehicle Identification Number (VIN) of the vehicle in question.
2. Verify that the Electric Vehicle Supply Equipment (EVSE) is disconnected.
NOTE
Use a lithium battery-capable charger connected to the 12 V battery with a charge rate between 4–5 A when reflashing ELW modules to support the 12 V lithium battery.
3. Connect a battery charger to vehicle.
4. Place vehicle in ACCESSORY MODE.
5. Connect DT II and Techlink 3 (TL-3) to vehicle. Special Tool: DIGITAL TECHNICIAN II (HD-48650) Special Tool: TECHLINK 3 (HD-48650-TL3)
6. Upload vehicle information.
a. See Figure 2. Click Vehicle/TechLink II Selection (1).
b. Upload vehicle information.
c. Click OK (22).
7. Verify current calibration.
NOTE
Do not attempt to reflash more than one module at a time. Doing so may cause reflashing issues.
a. Click Reflash (8).
b. Compare current to available calibration. Refer to Table 1.
c. If current calibration differs in any way, update is needed.
8. Start update with VSC Update.
| Module Present | Current Calib-
ration(1) |
Available Calibration | |
| VSC | Calibration: 7.1.17.2 | 7.4.28.2 | |
|
|
OBC |
Control Board:
2.5.156.2 |
2.8.95.2 |
| Power Board:
4.2.12.2 |
6.18.64.2 | ||
| Charger:
0.90.129.2 |
0.92.158.2 | ||
| (1) Calibration number may differ from what is shown in table. | |||
VSC Update
1. Click VSC.
2. Click OK.
3. Click calibration 7.4.28.2.
4. Click OK.
5. Follow instructions on DT II screens as they appear and click OK as needed.
6. When “turn key OFF” screen appears, turn vehicle OFF for 2 minutes instead of 20 seconds. Click OK.
a. ELW vehicles need more time for all modules to completely turn off and allow them to update.
7. After waiting 2 minutes with the vehicle OFF, place vehicle in ACCESSORY MODE.
8. Verify DT II/TL-3 are communicating with the vehicle.
a. If DT II/TL-3 are not communicating with vehicle, reboot DT II.
9. Click Reflash.
10. Are the VSC current and available calibrations the same?
a. Yes. Go to OBC Update.
b. No. Start update procedure again. Go to Step 1.
OBC Update
1. Verify that the 12 V battery charger is connected to vehicle.
2. Click OBC.
3. Click OK.
4. Click calibration 2.8.95.2.
NOTE
This single OBC calibration update updates all three calibrations listed in Table 1 under the OBC available calibration.
5. Click OK.
6. Follow instructions on DT II screens as they appear. and click OK as needed.
7. When “turn key OFF” screen appears, turn vehicle OFF for 2 minutes instead of 20 seconds. Click OK.
a. ELW vehicles need more time for all modules to completely turn off and allow them to update.
8. After waiting 2 minutes with the vehicle OFF, place vehicle in ACCESSORY MODE.
9. Verify DT II/TL-3 are communicating with the vehicle.
a. If DT II/TL-3 are not communicating with vehicle, reboot DT II.
10. Click Reflash.
11. Are all OBC current and available calibrations the same?
a. Yes. Go to IM Update.
b. No. Start update procedure again. Go to Step 2.
IM Update
1. To download the latest IM update file click: swdl_LW_INST.zip
NOTE
- Log in to Service Information Portal (SIP) through Google Chrome to view.
- Must use a Universal Serial Bus Type-C (USB-C) drive to upload update to IM.
2. Move IM update file.
a. Locate the Downloads folder on computer.
b. Unzip IM update file.
c. Copy, Cut or Drag IM update to the root directory of the USB-C drive.
NOTE
Do not place the update in any folder, this prevents the IM from performing the update.
d. Eject USB-C drive.
3. Remove fairing. See the service manual.
4. See Figure 1. Connect USB-C drive to vehicle.
5. Using Trip switch, place vehicle into accessory mode.
6. Navigate IM:
a. SETTINGS > SYSTEM > ABOUT > FACTORY OPTIONS > UPDATE SOFTWARE
7. Allow IM update to complete.
8. Remove USB-C drive.
9. Install fairing. See the service manual.
10. Updates are complete.
New Charging Widget Displays
With these updates are new charging widget displays that may appear on the IM. Refer to Table 2.
These new charging widget displays must be inserted into the 2020 ELW Owner’s Manual. Refer to Owner’s Manual New Charging Widget Displays Insert.
| Widget | Text Displayed | Cause | Action |
| EVSE Fault | EVSE fault. | See portable charger (EVSE) user guide. | |
| Charge Port Tock Fault | Charge port lock not functioning. | See dealer. | |
| Charge Plug Latch Pressed | EVSE latch switch indication pressed. | If EVSE latch not pressed – see dealer. | |
| OBC Too Warm | OBC above operating temperature. |
|
|
| RESS Too Warm | Rechargeable Energy Storage System (RESS) above operating temperature. | Restart charge after vehicle cools down. | |
| Establishing Communication | Vehicle establishing communication with external charger. | Check external charger for further instructions if needed. | |
| User Delayed | DC fast charging delayed or stopped by user. | Restart charge if desired. |
Owner’s Manual New Charging Widget Displays Insert
NOTE
Login into SIP through Google Chrome to view insert.
1. Click on Owner’s Manual Insert and print.
a. Click on INSERT: M1519: RECALL 0176…
b. Click on printer icon in up right corner of insert screen.
c. Print.
2. Insert the charging widget displays page into the owner’s manuals applicable to this bulletin that are on site.
3. If customer’s owner’s manual is not present with the vehicle, do the following:
a. Give the copy of the charging widget displays page to the customer.
b. Inform the customer to read and insert the page into their owner’s manual.
Credit Procedure
NOTE
- Enter bulletin number into comment section of claim.
- Recall claim submission from non-certified ELW dealers will not be processed.
For each vehicle involved in this recall (involvement of VIN has been verified on H-Dnet.com ), submit a recall claim per Table 3, Table 5, Table 4 or Table 6.
Upon submission of the properly completed claim, dealers are credited
- 1 h (Updates and Owner’s Manual (OM) insert only.)
- 2 h (Updates and OM insert plus pickup and/or delivery.)
of labor time for performing the procedure, plus appropriate administrative time. Submit campaign events on their own warranty claim. Do not mix claims with other warranty events.
Credit Procedure: Talon/H-Dnet.com Warranty Claim System Users
Table 3. Updates and OM Insert Only
| ITEM | DATA |
| Claim Type | SRC |
| Problem Part Number | 66000190 |
| Quantity | Leave Blank |
| Primary Labor Code(1) | 2716 |
| Time | 1 h |
| Customer Concern Code(1) | 0176 |
| Condition Code | 9981 |
| (1) Download may be required | |
Table 4. Updates and OM Insert Plus Pickup and/or Delivery
| ITEM | DATA |
| Claim Type | SRC |
| Problem Part Number | 66000190 |
| Quantity | Leave Blank |
| Primary Labor Code(1) | 2742 |
| Time | 2 h |
| Customer Concern Code(1) | 0176 |
| Condition Code | 9982 |
| (1) Download may be required | |
Credit Procedure: GDP System Users
Table 5. GDP System
| ITEM | DATA |
| Claim Type | Recall Claim |
| Fix ID-Found in Recall Number | C |
| Problem Part Number | 66000190 |
| Customer Concern Code | 0176 |
| Condition Code | 9981 |
Table 6. Updates and OM Insert Plus Pickup and/or Delivery
| ITEM | DATA |
| Claim Type | Recall Claim |
| Fix ID-Found in Recall Number | R |
| Problem Part Number | 66000190 |
| Customer Concern Code | 0176 |
| Condition Code | 9982 |
IMPORTANT SAFETY RECALL INFORMATION
Safety Recall Campaign 0176 – LiveWire Onboard Charger Software
HIGHLIGHTS
- Harley-Davidson Motor Company, Inc. has decided that a defect which relates to motor vehicle safety exists on certain model year 2020 LiveWire models built between 3/18/2019 and 8/20/2020.
- The software in the Onboard Charging (OBC) System may initiate a shutdown of the electric vehicle powertrain, without providing reasonable indication to the rider that a shutdown sequence has been initiated. In some cases, the vehicle may not be able to be restarted or, if restarted, may shortly thereafter shut down again. Unexpected loss of propulsion of the vehicle while in motion without the ability to restart or remain restarted may increase the risk of a crash.
KEY DATES
- On or about 10/15/2020: Software updates available for dealers to download
- On or about 10/15/2020: Service Bulletin posts
- On or about 10/22/2020: Owner notification letters begin mailing
CONTACT
- U.S. dealers: Call 800-664-7762 and select the appropriate prompts
- International dealers: Contact their regional office
October 15, 2020
Worldwide LiveWire Dealers:
Harley-Davidson has learned that the software in the Onboard Charging (OBC) System of LiveWire (ELW) model motorcycles built between 3/18/2019 and 8/20/2020 may initiate a shutdown of the electric vehicle powertrain, without providing reasonable indication to the rider that a shutdown sequence has been initiated. In some cases, the vehicle may not be able to be restarted or, if restarted, may shortly thereafter shut down again. Unexpected loss of propulsion of the vehicle while in motion without the ability to restart or remain restarted may increase the risk of a crash.
We have voluntarily declared that this condition constitutes a safety defect to allow us to formally recall (Campaign 0176) all affected motorcycles. The remedy is to first confirm that the motorcycles are covered by this recall. If covered, perform the recommended software update per Service Bulletin M1519 to update the OBC software. The OBC software update will address the defect condition. While the customer’s motorcycle is at your dealership to have the recall remedy performed, in the interest of improving the riding and charging experience for the customer, please also install updates to the Instrument Module and the Electric Vehicle Powertrain (also known as the EVPT or Motor) per Service Bulletin M1519. Because this software update will enable new functionality in the Instrument Module, it is important that you print out and provide to the customer a copy of the Owner’s Manual addendum which is attached to the service bulletin. Service Bulletin M1519 outlining the repair and credit procedures for the recall OBC update and the updates to the Instrument Module and EVPT will be posted on or about 10/15/2020; reference the bulletin for additional information.
In the interest of our mutual customers’ safety, and as required by federal law, you may sell but not deliver any motorcycles until the remedy is complete. Please refer to H-Dnet / My Toolbox / Warranty Campaign Center. Select “Safety Campaign Open VIN list,” then select “0176” Campaign to view the VIN list.
In accordance with federal regulations administered by NHTSA and other appropriate market- specific government agencies, Harley-Davidson Motor Company, Inc. or authorized HarleyDavidson dealers will provide notice to all owners of record of affected products with direction to arrange for the recall service.
Leading in the electrification of motorcycles requires agility and a clear commitment to quality and integrity, and Harley-Davidson continues to demonstrate both. This safety recall is one example of how we deploy rigorous quality protocols and face challenges directly.
We take pride in the quality standards and controls we employ in our drive to lead the industry and deliver the world’s most desirable motorcycles. Thank you for your cooperation.
Sincerely,
Harley-Davidson Motor Company, Inc.
Recall 0176
For: Dealer Operator, General Manager, All P&A Roles, All Service Roles, Vehicle Sales Manager
Sent to: All LiveWire Dealers
SEOCONTENT-START
Harley-Davidson Motor Company, 3700 West Juneau Ave., PO Box 653, Milwaukee, WI 53201 414/342-4680
IMPORTANT SAFETY RECALL
Owner Notification
This notice applies to your vehicle, VIN # 1HD2XAEB2LB
October 19, 2020
Harley-Davidson Recall No. 0176
NHTSA Recall No. 20V624
Dear Harley-Davidson® Motorcycle Owner:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Harley-Davidson Motor Company, Inc. has decided that a defect which relates to motor vehicle
safety exists on certain model year 2020 LiveWire® (ELW) models. We are notifying you because
our records indicate that you may own one of these motorcycles.
What is the Issue?
The software in the Onboard Charging (OBC) System may initiate a shutdown of the electric
vehicle powertrain, without providing reasonable warning to the rider. In some cases, the
vehicle may not be able to be restarted or, if restarted, may shortly thereafter shut down again.
Unexpected loss of propulsion of the vehicle while in motion without the ability to restart or
remain restarted may increase the risk of a crash.
What Should You Do?
Please contact your Harley-Davidson® LiveWire® dealer immediately to schedule an appointment
to have updated OBC software installed at no cost to you. The OBC software update will address
the defect condition. While your motorcycle is at the dealer to have the recall remedy performed,
your dealer will also install at no charge updates to the Instrument Module and the Electric Vehicle
Powertrain (also known as the EVPT or Motor) to improve the riding and charging experience.
DFFFATAFFFADAFTADDFDFFDFAATFADDAFDAFATADADDDDFTDFTAFATTAAFAADADAT
XAEB2LB800262
*************AUTO**ALL FOR AADC 530 P1 C1 ## 0171D
Overall, the recall remedy and additional software enhancements will take less than 1.5 hours to
perform. However, due to scheduling, the dealer may require your motorcycle for a longer period
of time. To verify that the service has been completed, your dealer will ask you to sign a recall
claim.
If you have sold your motorcycle and have an address for the current owner, it is important that you
forward this notice to the new owner. Alternatively, you may contact us at the Harley- Davidson
phone numbers listed below and provide us with the new contact information so that we may
notify the new owner of this recall. Also, Federal law requires that any vehicle lessor receiving this
recall notice must forward a copy of this notice to the lessee within ten days.
What If You Have Additional Questions or Concerns?
For more information, or if you take your motorcycle to your dealer on a mutually agreed upon
date and they are unable to perform the required service to your satisfaction, please contact Harley-
Davidson Motor Company, Inc. for immediate assistance at 1-800-258-2464 in the U.S. or
1-414-343-4056 world-wide.
If you are still having difficulty getting your vehicle serviced in a reasonable time, you may write
the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE,
Washington, DC 20590; or call the toll-free Auto Safety Hotline at 1-888-327-4236 (TTY:
1-800-424-9153); or go to https://www.safercar.gov.
We regret any inconvenience this may cause you, but we are initiating this action in the interest of
your personal safety and satisfaction with our products.
Leading in the electrification of motorcycles requires agility and a clear commitment to quality and
integrity, and Harley-Davidson continues to demonstrate both. This safety recall is one example of
how we deploy rigorous quality protocols and face challenges directly.
We take pride in the quality standards and controls we employ in our drive to lead the industry and
deliver the world’s most desirable motorcycles. Thank you for your cooperation.
Sincerely,
Harley-Davidson Motor Company, Inc.
Recall 0176
SEOCONTENT-END
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| HARLEY-DAVIDSON | ELW | 2020 |
8 Associated Documents
ISSUED Owner Notification Letter(Part 577)
RCONL-20V624-4791.pdf 166.438KB
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
RCAK-20V624-9228.pdf 293.329KB
Loading...
Manufacturer Notices(to Dealers,etc) – Safety Recall Campaign 0176 – LiveWire Onboard Charger Software
RCMN-20V624-2387.pdf 153.716KB
Loading...
Remedy Instructions and TSB
RCRIT-20V624-1410.pdf 569.758KB
Loading...
Defect Notice 573 Report
RCLRPT-20V624-4145.PDF 216.166KB
Loading...
Recall Quarterly Report #2, 2021-1
RCLQRT-20V624-8912.PDF 211.236KB
Loading...
Recall Quarterly Report #1, 2020-4
RCLQRT-20V624-3919.PDF 211.137KB
Loading...
Recall Quarterly Report #3, 2021-2
RCLQRT-20V624-1003.PDF 211.322KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V624&docType=RCL
- 🏍️【System Diagnosis Features】The Motocycle diagnostic tool Support engine / ABS / Tire pressure / Anti-theft and other systems, It can quickly read and clear diagnostic trouble codes, view freeze frame, display data stream and do active tests, get vehicle information, You are allowed to perform a complete and deep detection for your motorcycles, rather than send it directly to repair shop, very suitable for diyers.
- 🏍️【Easy To Use】 Code Readers Scan Tools is a handheld motorcycle diagnostic tool for mainstream motorcycle brands and can help technicians diagnose problems faster and make repairs. This tool has functions such as voltage detection, multi-language selection, and unit switching. It has a clear interface and is easy to operate. It is a good helper for motorcycle maintenance.
- 🏍️【Wide Compatibility】Motorcycle Fault Code Readers support the diagnosis of Asian, European and American multi-brand motorcycles, M3-A is suitable for motorcycles of Yamaha, Honda, Kawasaki and OBD2, Supports 11 languages, You can switch the language you need anytime.
- 🏍️【Portable and Convenient】The motorcycle diagnostic requires no Internet connection or setup, and with a lightweight body that can be operated with one hand, you can take it anywhere and use it very conveniently.
- 🏍️【Free Software Upgrade】Connect the device to the computer and wait for the device to be recognized by the computer. After the recognition is successful, a new drive symbol will appear on the computer. Open this and replace the “DIAGNOSE" folder in the drive with the downloaded “DIAGNOSE" upgrade folder, and then power on again. The updated files can be obtained by contacting the customer service.
- 🏍️【Easy To Use】M6 Motorcycle Diagnostic Tool is a handheld motorcycle diagnostic tool for mainstream motorcycle brands and can help technicians diagnose problems faster and make repairs. This tool has functions such as voltage detection, multi-language selection, and unit switching. It has a clear interface and is easy to operate. It is a good helper for motorcycle maintenance.
- 🏍️【104 Service Functions Supported】M6 Motorcycle Diagnostic Tool supports up to 104 service functions that allow technicians to perform factory service procedures such as Oil maintenance lamp reset, ECU reset, making injection adjustments (CO Trimmer), adjusting the throttle valve position sensor (TPS), re-setting auto adaptive parameters, and re-setting the service light, and making idling adjustments.
- 🏍️【Wide Compatibility】support the diagnosis of Asian, European and American multi-brand motorcycles, Supports 11 languages, You can switch the language you need anytime.
- 🏍️【System Diagnosis Features】The Motocycle diagnostic tool Support engine / ABS / Tire pressure / Anti-theft and other systems, It can quickly read and clear diagnostic trouble codes, view freeze frame, display data stream and do active tests, get vehicle information, You are allowed to perform a complete and deep detection for your motorcycles, rather than send it directly to repair shop, very suitable for diyers.
- 🏍️【Read Data Steam】The data stream waveform graph automatically adapts to the data without the need for manual adjustment of amplitude and allows for viewing of specific data streams rather than displaying all data streams at once. It comes equipped with features such as a printer, image viewer, data logging and playback, battery testing, charge detection, error reporting and feedback, and more.
- 🚴🏻【Intelligent dual systemmotorbike tester】 Motorbike Diagnosis + Battery Analysis.
- 🚴🏻【Product Features】 Multi-purpose machine, can be used for motorbike testing,battery testing, car testing, etc.
- 🚴🏻【Signal Simulator】Can simulate crank signals, PWM signals, injector signals, ignition signals.
- 🚴🏻【Support wifi online upgrade】Built-in 2.4G high-speed transmission wif moduleonline cloud service automatic upgrade, convenient and fast.
- 🚴🏻【Supports 13 different languages】English, Chinese Traditional, Spanish, French, Cambodian, Thai, Chinese Turkish.Vietnamese, Indonesian, Portuguese, Japanese, Korean, German.
- 👍【Multifunctional Motorcycle Diagnostic Tool】MT500 PRO is an advanced motorcycle diagnostic tablet developed by ANCEL specifically for motorcycle enthusiasts. Bright 5" touchscreen & Android 5.1.1 OS & 8 Languages; Auto VIN & Scan; Online remote assistance and solve problems, One-click WIFI update; Full systems diagnosis for most popular motorcycle models; 30+ Resets like oil service reset, abs bleeding, etc.
- ✅【Wider Motorcycle Coverage Than Others】 Compare with other similar motorcycle scan tool, MT500PRO added more popular motorcycle brands, it' not only compatible with Harley Yamaha Honda Indian Polaris BRP Victory diagnosis.Newly upgraded in 2023 with the addition of two more popular brands fit for Kawasaki Suzuki diagnosis. Plug and play, easy to use
- ✅ [Manufacturer-level Diagnostic] MT500 PRO is a all-system motorcycle diagnostic tool. It can read and clear trouble codes and turn off the CEL when a check engine light comes on. Besides, it can also scan all the available electronic control modules of your motorcycle including Engine, ABS, TPMS, Suspensions, Ignition, EPS, Service system, Meter system, etc. to read/clear fault codes, and view live data.You can quickly and accurately find existing or potential problems, saving time and money
- ✅ [Excluisive Advance Functions, Save Costs For You] MT500 PRO diagnostic tool with almost all daily maintenance services that necessary advanced functions for most motorcycle to meet the market trends and needs. Auto scan, auto VIN recognition, control module programming and coding, ECU setting, instrument coding, maintenance light reset, CO adjustment, idle speed adjustment, A/F value reset, ABS control unit setting etc. Help you solve all kinds of complex maintenance problems easily
- ✅The ANCEL MT500PRO scanner diagnostic tool providing real-time data display for quick and accurate diagnostics. With its user-friendly touch screen interface, the Moto 100 OBD2 code reader allows for easy navigation and interpretation of the data streams. Whether you are a professional mechanic or a motorcycle enthusiast, this code reader is a valuable tool for troubleshooting and maintaining your motorcycle’s performance
- 💯OBDPROG MOTO 100 Diagnostic Scan Tool Compatible with a wide range of Harley Davidson motorcycles, including Touring, Dyna, Softail, Sportster, Touring CVO, and VRSC V-Rod and more.
- 💯OBDPROG MOTO 100 Diagnostic Scan Tool Compatible with Polaris motorcycles, including RANGER, ATV, Snow, RZR, Slingshot, Commercial, LEV, ACE, General, and Generic and more.
- 🍻[Compatible with over 1000 models and makes] For Indian motorcycles (Chieftain, Scout, Scout Sixty, Scout Bobber, Springfield, and more), For BRP motorcycles (Commander, DS, Defender, Maverick, Outlander, Renegade, Traxter, Spyder, Adventure, Boondocker, and more), For Victory motorcycles (Vision, High-Ball, Cross Country, Cross Roads, and more), For Yamaha motorcycles, and Honda motorcycles. Equipped with a 5.0-inch touch screen and offers easy WiFi updates during the first year at no additional cost. After the first year, a yearly software fee of $80 is applicable.
- 🍻[Clear The Check Engine Light Yourself] Provides full system motorcycle obd2 diagnostic, component reset, and relearn functions for these motorcycles. Can retrieve and clear fault codes from the motorcycle's ECU, and analyze information from ABS, Engine, Transmission, Power Steering, and Meter systems.
- 🍻[Monitor your Bike’s Health] Provides multiple displays of live data, including text, graphics, and gauges, allowing motorcycle owners to monitor oil temperature, pressure, transmission temperature, engine speed, engine coolant temperature, and short-term fuel trim.
- 【Topdiag M100 pro Hand-Held Operation】: Jdiag m100 pro motorcycle scanner is hand-held operation, easy to use, simplo and flexible, fast troubleshooting.
- 【Topdiag M100 Pro Widely Used For Motorcycle Repair】：Suitable for motorcycle maintenance technicians andpersonal vehicle maintenance and repair.
- 【Multiple Battery Test Methods】Jdiag m100 pro motorcycle scanner: Multiple test methods for more professional testing of car batteries.
- 【Support Multi-languages】：English,Traditional Chinese, Viotnamese, Indonesian, Thai, Spain;Turkey, Portugel, French, Khmer.
- 【Jdiag m100 pro motorcycle scanner support Motorcycle list】: Hartford, Aeon, Honda, SYM, Yamaha,Suzuki,Kymco,Kawasaki,Piaggio,PGO,KTM, etc
- Fits 2001-2014 Harley Davidson Fuel Injected models with the 4 pin connector (check detailed compatibility list below).
- Converts 4 pin to 16 pin OBD2 connection for use with your J1850 capable OBD2 scanners or readers.
- Compatible with RPMitUP and Harley Droid App.
- Built to last quality cable and moulded plug. 1 feet. See B09VSYV478 for the 6 pin CAN BUS version.
- With the appropriate OBD2 device and software (not included), you can read and erase error codes, view live data like RPM, Horsepower, Torque, Engine temperature etc.
- [Full System Diagnostics] M200 professional scan tool it can request information from motorcycle or send commands to the autocycle modules. It allows the technician to perform factory service procedures such as✅ABS system test✅Freezing data✅Actuator testing✅DTC enquiry✅Clean the injectors✅Troubleshooting✅CO idle speed adjustment✅Adjusting the throttle valve position sensor(TPS)
- [17+ Services] M200 Scanner Diagnostic Tool is designed for home mechanics and workshops, garages. Support almost all the most popular functions of motorcycles, including Engine, ABS, TPMS, Suspensions, Ignition, EPS, Traction control, Radio, LED headlight. Battery detection, Start test, Charging test, Relay test, etc. Help you handle all kinds of complex maintenance problems easily.
- [With Print Function] The tester is equipped with a built-in printer that can generate printed test reports. These reports typically include the battery test results, including voltage, CCA, SOC, and any additional measurements or diagnostic information. The printed report serves as documentation and can be used for reference or for sharing the results with customers or technicians.
- [Battery Tester] Allows you to assess motorcycle battery health and performance.Voltage measurement, include load testing, charging test, start test. By performing a battery test using a motorcycle diagnostic tool, you can identify any battery-related problems early on and take appropriate action.
- [M200 Works With Your Motorcycle] The M200 is capable of accurately monitoring and diagnosing problems on over 14 different makes of motorcycle. This includes AEON, Apprilia, Benelli, Hartford, Honda, Kawasaki, Kymco, Piaggio, PGO, Suzuki, Sym, Vespa, Yamaha.etc., and is a good choice for motorcycle repair shops, and home mechanics.
- 🔥【2022 MOST Worth Buying Motorcycle Diagnostic Tool】MT500 PLUS is an advanced motorcycle diagnostic tablet developed by ANCEL specifically for motorcycle enthusiasts.🥇Bright 5" touchscreen & Android 5.1.1 OS & 8 Languages;🥇Auto VIN & Scan;🥇Online remote assistance and solve problems, One-click WIFI update;🥇Full systems diagnosis for almost of all EU motorcycle models, such as BMW/Yamaha/KTM/Triumph/Ducati, etc.;🥇30+ Resets;✅1-Year Free Update (Value $200);✅9 extra adapter cables (Value $300)
- 【Wider Coverage for Motorcycles】Most motorcycle scanners on the market are mainly fit for BMW. For the convenience of owners who own different motorcycles, we specially added DUCATI, KTM, TRIUMPH, YAMAHA, HONDA, SUZUKI, KAWASAKI. not only that, it also covers scooters, side-by-side motorcycles, snowmobiles, ATVs, etc. It is easy to plug and play. What's more, considering the different interfaces, it is specially equipped with 9 adapter cables (worth over $300), no need to spend extra money to buy
- Fit for BMW/Yamaha/DUCATI/TRIUMPH】For BMW motorcycles, it supports serial C/F/G/H/K/R/S, year 1996 onward. For Yamaha motorcycles, it supports serial A/B/C/D/F/G/M/N/R/S/T/V/W/X/Y/Z, year 2003 onward. For DUCATI motorcycle, it supports serial 1/7/8/9/D/G/H/M/P/S/X, year 1998 onward. For TRIUMPH motorcycle, it supports serial A/B/D/R/S/T, year 1997 onward. Please confirm compatibility via email, message or Q&A before ordering
- 【Manufacturer-level Diagnostic for Motorbike】MT500 PLUS supported do a dealer-level and comprehensive diagnosis for all electronics control modules of your motorcycles, including Engine, ABS, TPMS, Suspensions, Ignition, EPS, Traction control, Radio, LED headlight, Service system, Meter system. It can read and clear fault codes, allows you to easily diagnose engine problems and turn off the warning light. It makes your easily know the car situation and check the problems
- 【30+ Special Service Functions】MT500 PLUS motorbike scan tool covers almost all commonly used resets, such as TPS reset, Oil Reset, ABS Brake Bleeding, EPB Service, ECU reset, instrument coding, CO adjustment, idle speed adjustment, A/F value reset, windshield adjustment, etc. Helping motorcycle users save money and time in maintenance or repair, at least $300/YEAR
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.