“This site contains affiliate links for which OEMDTC may be compensated” |
November 22, 2019 NHTSA CAMPAIGN NUMBER: 19V842000
Roof Hatch External Handle May Break/FMVSS 217
If the roof hatch external handle breaks, in the event of an emergency, the hatch cannot be easily opened from outside the vehicle, increasing the risk of injury.
NHTSA Campaign Number: 19V842
Manufacturer Transportation Collaborative, Inc.
Components STRUCTURE
Potential Number of Units Affected 9
Summary
Transportation Collaborative, Inc. (Transportation Collaborative) is recalling certain 2019-2020 TransTech CST and SST school buses equipped with Safe Fleet Prolo hatches. Due to a manufacturing issue, the roof hatch external handle may unexpectedly break under reasonable use. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 217, “Bus Emergency Exits and Window Retention and Release.”
Remedy
Transportation Collaborative will notify owners, and Safe Fleet dealers will replace the outer handle, free of charge. The recall began January 13, 2020. Owners may contact Transportation Collaborative customer service at 1-845-988-0419.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
4 Affected Products
Vehicles
MAKE | MODEL | YEAR |
TRANS TECH | CST | 2019-2020 |
TRANS TECH | SST | 2019-2020 |
4 Associated Documents
Recall Quarterly Report #1, 2020-1
RCLQRT-19V842-9050.PDF 211.141KB
Recall Acknowledgement
RCAK-19V842-7737.pdf 244.897KB
Defect Notice 573 Report
RCLRPT-19V842-2594.PDF 214.66KB
Recall Quarterly Report #2, 2020-2
RCLQRT-19V842-4978.PDF 211.237KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V842&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- Features a door seal, base insulation, and wool insulation
- Includes a high curb and wide flange for securing hatch to roof deck
- Features dual compression spring-operated cylinders
- Provides convenient roof access for multiple environments including manufacturing plants, warehouses, commercial properties, and more
- Heavy-duty automatic lock arm secures the hatch for added security and unauthorized entry protection
- Powder coat finish is designed to prevent rust and oxidation making it suitable for outdoor environments
- Includes a high curb and wide flange for securing hatch to roof deck
- Features dual compression spring-operated cylinders
- Automatic Hold-Open Arm Locks The Cover In The Open Position To Ensure Safe Egress
- Overlapping cover design, full welded corners on cover and curb, EPDM rubber gasket, and fully insulated cover and curb ensure weathertightness and energy efficiency
- Constructed with corrosion resistant materials to provide many years of trouble free, dependable service
- Heavy gauge construction and positive latching mechanism maintain building security
- Curb features the Bil-Clip flashing system, an innovative method to quickly and easily secure single-ply roofing material to Bilco roof products
- RV Escape Hatch ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your unit) 19 1/4" X 26 1/4"
- RV Escape Hatch EXTERIOR MOUNTING FLANGE DIMENSIONS (sits on the top of your unit) 21" X 28"
- LID COLOR Opaque White You can not see through the lid SCREEN Screen Strong, Fine mesh
- QUICK RELEASE LATCH you can exit through the roof of your unit in a fire or other emergency requiring an alternate exit
- NO MOUNTING HARDWARE you must provide screws and caulk / putty tape
- RV Escape Hatch ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your unit) 25 1/2” x 25 1/2”
- RV Escape Hatch EXTERIOR MOUNTING FLANGE DIMENSIONS (sits on the top of your unit) 27 1/2” x 27 1/2”
- LID COLOR Opaque White You can not see through the lid SCREEN Screen Strong, Fine mesh
- QUICK RELEASE LATCH you can exit through the roof of your unit in a fire or other emergency requiring an alternate exit
- NO MOUNTING HARDWARE you must provide screws and caulk / putty tape
- Powder Coated, Steel Roof Hatch Safety Extension Handle This extension handle mounts to roof
- RV Escape Hatch ROUGH CUT-OUT OPENING DIMENSIONS (this is the hole you will need in your unit) 17 3/8” x 24 5/8”
- RV Escape Hatch EXTERIOR MOUNTING FLANGE DIMENSIONS (sits on the top of your unit) 19” x 26 1/2”
- LID COLOR Opaque White You can not see through the lid SCREEN Screen Strong, Fine mesh
- QUICK RELEASE LATCH you can exit through the roof of your unit in a fire or other emergency requiring an alternate exit
- NO MOUNTING HARDWARE you must provide screws and caulk / putty tape
- Instant exit, screen opens quickly to assure fast escape
- Dependable leak-resistant lid
- Includes opaque plastic lid and 2" white metal garnish
- Aluminum frame mounts easily
- Size: 22" x 22"
- Tie Down 65082 Roof Top Safety Hatch Ladder Hand Assist
- Quickly attaches with simple tools
- Spring loaded for one hand operation
- Country of origin: United States
Last update on 2024-03-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.