Axle Hanger Brackets May Fail - 2017-2020 LGS Look, Pace, & Cargo Express Trailers

August 22, 2019 NHTSA CAMPAIGN NUMBER: 19V619000

Axle Hanger Brackets May Fail

A bracket failures could affect the vehicle's stability, increasing the risk of a crash.

 

NHTSA Campaign Number: 19V619

Manufacturer LGS Industries Inc

Components SUSPENSION

Potential Number of Units Affected 170

 

Summary

LGS Industries Inc. (LGS) is recalling certain 2017-2020 Look, Pace, And Cargo Express trailers. The axle hanger bracket may fail, possibly resulting in the axle shifting.

 

Remedy

LGS will notify owners, and dealers will weld gussets on both ends of the hanger bracket to provide reinforcement, if necessary, free of charge. The recall is expected to begin in September 2019. Owners may contact LGS customer service at 1-877-475-5665.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.


12 Affected Products

Vehicles

MAKE MODEL YEAR
CARGO EXPRESS CARGO TRAILER 2017-2020
LOOK CARGO TRAILER 2017-2020
PACE CARGO TRAILER 2017-2020

2 Associated Documents

Defect Notice 573 Report

RCLRPT-19V619-3931.PDF 212.875KB

GDE Error: Error retrieving file - if necessary turn off error checking (404:Not Found)

Recall Acknowledgement

RCAK-19V619-3701.pdf 245.317KB

GDE Error: Error retrieving file - if necessary turn off error checking (404:Not Found)

Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V619&docType=RCL


 

Bestseller No. 1
Rockwell American Single Axle Spring Hanger Kit & U-Bolt Kit for 3,500lb Trailer Axle
  • Rockwell American U-Bolt Kit & Hanger Kit for 3,500lb Trailer Axle.
  • Single Axle Hanger Kit ( For 2,00lb - 7,000lb Axles) Typically Used on 3,500lb Axles
  • (2) Front Hangers, (2) Rear Hangers, (4) 3.125" Shackle Links, (6) 9/16"-18 x 3" Shackle Bolts, (6) 9/16"-18 Lock Nuts
  • Mount Your Round 2-3/8" Diameter Trailer Axle to Your Trailer's Leaf Springs with this U-Bolt Kit
  • 4 - U-Bolts ( 1/2" 20 x 5.50" Long ), 2 - U-Bolt Plates, 8 - 1/2" Flanged Nuts
Bestseller No. 2
Single Axle Hanger Kit (HK1-D100) For Double Eye Springs
  • Spring hanger kit for mounting 1-3/4" wide double eye springs to a single axle trailer.
  • Kit includes (2) front hanger brackets, (2) rear hanger brackets, (4) spring shackle links, (6) spring bolts and (6) lock nuts.
  • Please note: Welding/fabrication is required for install.
  • Raw steel
  • Read product description below for more detailed information
Bestseller No. 3
Rockwell American Tandem Axle Spring Hanger Kit - Fits 1.75" Double Eye Springs
  • Tandem Axle Spring Hanger Kit ( For 2,00lb - 7,000lb Axles) Fits 1- 3/4" Wide Springs
  • When Used With "Standard 25.25" Eye to Eye Leaf Springs, 1 3/4" Wide, Brackets Should be Installed 29 -3/4" Center to Center on Your Frame - Spring Hangers are Meant to be Welded On
  • (6) Hangers (all hangers are equal), (2) Cast Equalizers, (8) 3.125" Shackle Links
  • (14) 9/16" - 18 x 3" Shackle Bolts, (14) 9/16" - 18 Lock Nuts
  • Rockwell American Tandem Axle Hanger Kit.
Bestseller No. 4
Double Eye Tandem Trailer Axle Hanger Kit for 3500-7000 Pound Trailer Axles
  • All parts needed to weld to trailer for hanging axle (3.5k-7k axle application)
  • (4) 1-1/2" tall front and rear hangers; (2) 2-1/2" tall center hangers; (2) 7-3/4" long triangle equalizers
  • (8) 2-5/8" long shackle straps; (14) 3" long x 9/16" diameter shackle bolts
  • (14) 9/16" diameter lock nuts
  • Suspension Type: Double Eye; Axle Setup: Tandem Axle; Capacity: 3500-7000 lb
Bestseller No. 5
SaleBestseller No. 6
Dorman 722-101 Shackle/Hanger Kit
  • Leaf spring shackles and brackets
Bestseller No. 7
LIBRA Trailer Leaf Spring Hanger Kit for Double Eye Springs Single Axle Suspension
  • Fits 1-3/4" wide double eye springs.
  • For 2,000 - 7,000 lb axles. Typically used on 3500 lb signle axles. .
  • Kit include: 2 x 3" tall hangers, 2 x 2.1" tall hangers, 4 x shackle straps (eye to eye 3.09"), 6 x 9/16"-18 x 3" long shackle bolts and locknuts
  • These hanger kits are from our warehouse stock, which we wholesale to US trailer axle manufactures as OE parts
Bestseller No. 8
Tandem Trailer Axle Slipper Hanger Kit for 5200-8000 Pound Trailer Axles
  • All parts needed to weld to trailer for hanging axle (3.5k-7k axle application)
  • (2) 3-3/4" tall front hangers; (2) 3-3/8" tall center hangers; (2) 5-1/6" tall rear hangers; (2) 12" long straight equalizers
  • (8) 3-1/2" long x 9/16" diameter shackle bolts; (8) 9/16" diameter locknuts
  • (2) 4-11/16" long x 7/8" diameter equalizer bolts; (2) 7/8"diameter castle nuts; (2) 2-1/4" long cotter pins
  • Suspension Type: Slipper; Axle Setup: Tandem Axle; Capacity: 5200-8000 lb
Bestseller No. 9
Axle Spring or Equalizer Bracket (HG-102)
  • This weld-on leaf spring hanger bracket can be used in the front, center or rear position to attach 1-3/4" wide leaf springs.
  • The bracket is 3" long by 3.87" tall with a 9/16" hole located 3.25" from the top of the bracket.
  • The bracket is made of SAE 1010 - 1018 hot rolled steel and the inside width is 1.88".
  • See secondary p[ictures to the left for more information.
  • Read product description below for more detailed information.
Bestseller No. 10

Last update on 2019-10-12 / Affiliate links / Images from Amazon Product Advertising API

Last update on 2019-10-12 / Affiliate links / Images from Amazon Product Advertising API

Leave A Comment

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.