“This site contains affiliate links for which OEMDTC may be compensated” |
March 7, 2019
Possible Waterway Weld Failure
Failure of the weld while the waterway has water in it increases the risk of injury to those nearby.
NHTSA Campaign Number: 19V189
Manufacturer Kovatch Mobile Equipment Corp.
Components STRUCTURE
Potential Number of Units Affected 2
Summary
Kovatch Mobile Equipment Corp. (KME) is recalling certain 2018 Predator Tractor-Drawn Aerial (TDA) vehicles. A weld may fail on the waterway pipes, possibly resulting in a pipe detaching from the vehicle.
Remedy
KME will notify owners, and dealers will replace the affected sections of the lower waterways, free of charge. The recall began April 18, 2019. Owners may contact KME customer service at 1-800-235-3928.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
April 18, 2019
Name
Address
City, State Zip
IMPORTANT SAFETY RECALL NOTICE: 19V189
IMPORTANT SAFETY RECALL
This notice applies to your vehicle(s):
Dear KME Vehicle Owner:
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Why is a recall being conducted?
KME has decided that a defect which relates to motor vehicle safety exists in certain model year 2018 KME Tractor-Drawn Aerial vehicles manufactured from April 2018 through June 2018 equipped with certain aerial inlet waterway piping.
KME determined that a weld joint on the lower aerial waterway inlet piping may have been welded with an improperly prepared weld joint, which may lead to weld joint failure. If the weld joint fails while the piping is charged or charging with water, a piece of the piping may detach and be ejected from the vehicle and injure bystanders.
What are we doing about the problem?
KME will replace the affected sections of the lower waterways at no charge to the owner. The estimated time to complete the replacement is 4 hours.
What should you do?
If you receive this notification, please contact your KME Dealer or KME Customer Service at (570) 669-5230 to schedule an appointment to have your vehicle(s) remedied.
INCLUDED WITH THIS LETTER IS AN OWNER RESPONSE CARD TO BE FILLED OUT AND RETURNED TO KME. Please have your Truck VIN or GSO available. After the repair has been completed, please fill in the appropriate information on the enclosed Owner Response Postcard, sign it, and return it to:
Mail: KME, One Industrial Complex, Nesquehoning, PA 18240
E-mail: bpolgrean@kmefire.com
Fax: (570) 669-5182
What if you no longer own this vehicle?
If you are not the current owner of the vehicle, please indicate this on the Owner Response Postcard and return the card to us.
Federal law requires any lessor who receives a notification of a safety related defect or noncompliance pertaining to any leased motor vehicle shall send the notice to the lessee within 10 days. If you are no longer the owner of this vehicle, please provide us with any contact information so we may contact the new owner.
If you have already paid to have your vehicle repaired for this condition, you may be eligible for reimbursement of the charges you paid for the repair or replacement of components. To learn more about what you need to do to obtain reimbursement, contact our customer service department.
If after having attempted to take advantage of this recall you believe you have not been able to have your vehicle remedied without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this safety recall may cause, but your safety is our first concern.
Sincerely,
KME, Inc
April 18, 2019
SAFETY RECALL NOTICE: 19V189
TO: Affected KME Dealers
KME has decided that a defect which relates to motor vehicle safety exists in certain model year 2018 KME Tractor-Drawn Aerial vehicles manufactured from April 2018 through June 2018 equipped with certain aerial inlet waterway piping.
KME determined that a weld joint on the lower aerial waterway inlet piping may have been welded with an improperly prepared weld joint, which may lead to weld joint failure. If the weld joint fails while the piping is charged or charging with water, a piece of the piping may detach and be ejected from the vehicle and injure bystanders.
Owners will be notified by mail about the recall and will be instructed to contact their KME Dealer or KME to have the potentially affected piping replaced. There is no cost to owners for this recall.
Please be reminded that it is a violation of Federal law for you deliver a new motor vehicle or any new or used item of motor vehicle equipment covered by this notification until this defect has been remedied. Substantial civil penalties apply to violations of this law.
Your assistance with this recall is appreciated. Should you have any questions or concerns, please contact KME Customer Service at (570) 669-5230.
Sincerely,
KME, Inc.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
KME | PREDATOR TDA | 2018 |
7 Associated Documents
Recall Acknowledgement
RCAK-19V189-9654.pdf 245.629KB
Defect Notice 573 Report
RCLRPT-19V189-8692.PDF 212.659KB
Owner Notification Letter(Part 577)
RCONL-19V189-2569.pdf 135.029KB
Manufacturer Notices(to Dealers,etc)
Recall Quarterly Report #1, 2019-2
RCLQRT-19V189-1541.PDF 211.124KB
Recall Quarterly Report #2, 2019-3
RCLQRT-19V189-2493.PDF 211.227KB
Recall Quarterly Report #3, 2019-4
RCLQRT-19V189-0816.PDF 211.311KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=19V189&docType=RCL
- [MORE POWERFUL] Up to 135 Amp output allows you to weld mild steel up to 2/5” in the plate. Suitable for 2LB .030” & .035” flux core wire.
- [MULTI-PROCESS] 3-in-1 Welder, capable of Gasless MIG/Stick/Lift TIG. (need to buy an extra lift TIG torch) Meets your various welding needs.
- [DIGITAL DISPLAY] Advanced digital display, increases the visual clarity and improves the efficiency of the operation.
- [SYNERGIC CONTROL] When adjusting the wire feeding speed, the voltage will be automatically matched. Suitable for beginners and professionals.
- [SAFETY FIRST] Automatic compensation for voltage fluctuation, over current protection, over load protection.
- SYNERGIC CONTROL: The recommend current and wire feeding speed will be automatically matched after selected diameter of the welding wire(you can choose .030”/.035”/.040" flux core wire). The MIG welder is easier for beginners or those that are learning to weld and want to make small repairs around the house. 1 Free Flux Core Wire .030".
- 3-IN-1 WELDER: 3 welding modes Flux Core Gasless MIG/ Lift TIG/ MMA meet your different requirements (Need to buy extra Lift tig torch). Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of carbon steel, stainless or even thicker steel, Ideal for home DIY, outdoor repairs, rusty metal, farm and road equipment, and maintenance and repairs.
- SAFETY PROTECTION: The welder comes with an attached MIG torch and power cable, you can weld after unpacking the box, it’s convenient to use. Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine.
- PORTABLE AND COMPACT: The machine weighs only 11.79 pounds, and you can freely carry it anywhere with a handle or shoulder strap. Package includes 1* MIG130 Welder, 1* MIG Torch, 1*Ground Clamp, 1* Electronic Holder, 1* .030"/2lb Flux Cored Wire,1* 0.8/.030" conductive Nozzle,1* 0.9/.035" conductive Nozzle,1* Brush&Hammer,1* User Manual.
- WARM SERVICE & 2-YEAR WARRANTY: 30-Day Money Back Guarantee and 2-Year Warranty. Ideal for fathers day gifts. Every single of our welder machines passed various authoritative Laboratory tests in simulating extremely harsh environments before leaving our ARCCAPTAIN factory that conforms to the high standards.
- WELD ANYWHERE: Plug in the Weld-Pak 90i MIG wire feed welder anywhere 120V input power is available; It's designed to use with flux-cored welding wire (1/4” max thickness) or solid MIG wire (3/16" max thickness)
- ACCESSORIES INCLUDED: The machine comes with a full list of accessories including a welding gun, nozzle, contact tip, work cable and clamp; Metal case provides protection from the elements
- LIGHT & PORTABLE: Ideal for maintenance and mobile welders, thanks to its small and lightweight (15 lbs) inverter design and shoulder strap for portability; A good choice for professionals but it’s an easy to use welder for beginners too
- SMOOTH & EASY OPERATION: Has simple control with two knobs for wire speed and voltage; Inverter power source makes it more efficient to operate and provides smoother weld characteristics compared to traditional welders
- PERFECT FOR SMALL WELD JOBS: This machine is best for DIY projects, hobbyists, home repairs and more; Infinite welding voltage allows fine-tuning of weld characteristics
- Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.
- Multi-functions in one machine: Suitable for stick, lift TIG(torch is not included), flux MIG, gas MIG
- Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate.
- Big enough to apply to 2 and 10 pounds rolls of wire. Ready to feed .030"(0.8mm) with solid core wire, and .035" (0.9mm)with flux core wire.Can Handle E7018 basic electrode.
- Dual voltage input design: Welding machine can be plugged into 110(120)V / 220(230)V dual voltage (Automatic fitting).
- 4 in 1 Welding Machine:This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,4 welding modes for you to choose.
- Synergic Control: Adjusting the amperage or choosing different wire thicknesses,the voltage and wire feeding speed will automatically change.Even a beginner can easily use it.
- Gas/Gasless Welding: You can choose Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder Can handle 2 lb and 10 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, MAX Welding Thickness 8.0mm.
- Lift TIG/ARC Welding: Lift TIG available,TIG Torch fits WP17V, not included in the package.TIG Welding thickness 1.0MM-8.0MM, Suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel etc.Arc Welding fits rods E6013.
- Powerful And Safe Machine:This 200A Welding machine can weld mild up to 8.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.
- 【EASY TO USE】: The welding machine has included with voltage control knob,wire speed adjustment knob and with synergic control, automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. Even beginners can use it easily.
- 【POWERFUL AND SAGE WELDER MACHINE】: This 130A Welding machine can weld mild up to 3.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.Big enough to handle 2.2 pound rolls of wire.
- 【PORTABLE DESIGN】: Lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want; It only weighs 8.6 lbs., so you can effortlessly take it as far as you can.
- 【WIDE APPLICATIONS】: It can be used with a wide variety of metals and alloys. Suitable for home users, DIY craft enthusiasts, beginners and small projects.
- 【PACKAGE INCLUDES】: 130 MIG welding machine; Mig torch; Ground clamp; Brush&Hammer; 1lb .030" flux cored welding wire; Contact Tip*2.
- 【POWERFUL 3-IN-1 MIG WELDER】The 135Amp MIG welder that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA. The machine is delivered ready for operation without adjustments with 0.8 mm diameter filler wire.Also, 0.6 mm, 0.9 mm or 1.0mm solid wire or cored wire can be used as filler wire.
- 【SYNERGIC CONTROL】Adjusting the welding power according to sheet thickness affects simultaneously both wire feed speed and amount of current lead to the wire. This is a good starting point for welding in different operating situations.It's suitable for both hobby and professional use.
- 【IGBT TECHNOLOGY】IGBT intelligent inverter technology. IGBT power device with unique control mode improves the reliability of welding machine. The flux core welder works more efficiently, reduces energy loss, and welds better.
- 【PACKAGE INCLUDED】1*MIG/MMA Welder; 1*8.2ft CCA cable with 200A Electrode holder; 1*8.2ft CCA cable with 200A Earth clamp; 1*8.2ft Power cable with American standard plug; 1*8.2ft fixed MIG; 1*slag hammer; 1*User Manual
- 【SAFETY & DURABLE】The machine has passed a variety of professional tests and certifications before leaving the factory.The welding gun has an overheating protector which prevents operation when the machine is overheated. The machine is also protected from too low or too high supply voltage.
- ➠【𝐒𝐲𝐧𝐞𝐫𝐠𝐢𝐜 𝐌𝐈𝐆 𝐂𝐨𝐧𝐭𝐫𝐨𝐥】The wire feeding speed (current) and welding voltage will be automatically matched after selected diameter of the welding wire (.030/.035 inch flux core wire). The MIG welder is easier to make a beginner becoming a master welder.
- ➠【𝐒𝐦𝐚𝐫𝐭 𝐒𝐭𝐢𝐜𝐤 𝐖𝐞𝐥𝐝】Bulit-in smart Hot-start and Arc-force provide easy, quick and reliable arc start, and stable welding current, this mini welder has ideal performance for the most E6013, E6011, E6010, E7018 and E308-16 rods.
- ➠【𝐋𝐢𝐟𝐭 𝐓𝐈𝐆 𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧】This 3 in 1 welder has excellent Lift-arc TIG function, just touch the tungsten rod to the workpiece and lift off, easily arc starting, don't need to scratch it, it's like you getting a TIG welder for free.
- ➠【𝐒𝐚𝐟𝐞 𝐚𝐧𝐝 𝐒𝐭𝐚𝐛𝐥𝐞】This multiprocess welder built-in automatic Anti-stick, compensation for voltage fluctuation, over current protection, over heat protection, short circuit damage protection, to make sure the welding kit safely operation and long life.
- ➠【𝐖𝐢𝐝𝐞 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞】The wire feed welder is capable of welding all kinds of ferrous metals such as carbon steel, medium carbon steel, mild steel, stainless steel and cast iron. Only weighs 10.1 lbs, easy to carry with a handle or shoulder strap(included), very suitable for outdoor maintenance, farm, road equipment, and home DIY.
- Simple user interface - Seven segment display with basic knob controls.
- Process Capabilities - MIG, Flux-Cored and Spool Gun.
- Dual Input Voltage - 120V and 230V inputs so you can plug into any common power supply.
- Ergonomic Case - Sleek and robust case design with multiple lift points for ease of mobility around the shop.
- Lightweight and Portable - Only 41 lbs
- 【POWERFUL 3-IN-1 WELDER】Composed with Flux MIG, Lift TIG and Stick/MMA. Our powerful 3-in-1 welding machine meets your requirement for different welding situations like home DIY, outdoor maintenance and repairs, etc. (NOTE: the lift tig torch is not included)
- 【SYNERGIC CONTROL】Equipped with precise data, this flux core welder will automatically match the most suitable voltage, wire feeding speed by adjusting amperage, which is quite friendly for both professional welding worker and beginner. You can also adjust machine parameters by manually In order to best suit for your demand.
- 【SAFE & INTELLIGENT】Our MIG welder features overheat and overload protection will automatically shut off while overheated, and the built-in fan will consistently cool down your welder for 1-2 mins after shutdown. Additionally, the intelligent IGBT technology helps the welder reduce energy loss and works more efficiently.
- 【LIGHTWEIGHT & DURABLE】Item Dimensions: 13.6(L) x 6.6(W) x 11.15(H) inches, welder machine weight: 10.14lbs. This lightweight 135amp stick welder designed with two portable handles, allows you to take it anywhere, and you can add a shoulder belt by your own if need. Besides, IP21 water rating better protect your welder and extend its service life.
- 【SET INCLUDES】To spend you less money and bring you more convenience, our 3-in-1 welder set includes a solar powered auto darkening welding helmet (viewing size: 3.66"x1.69"), a pair of 932°F/500℃ heat resistant leather welding gloves and a roll of E71T-GS .030" 2lb flux core welding wire.
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.