“This site contains affiliate links for which OEMDTC may be compensated” |
March 8, 2023 NHTSA CAMPAIGN NUMBER: 23V156000
Fire Truck Water Pump May Fail
A firetruck that is unable to pump water increases the risk of injury during a fire.
NHTSA Campaign Number: 23V156
Manufacturer Spartan Fire, LLC
Components POWER TRAIN
Potential Number of Units Affected 166
Summary
Spartan Fire LLC (Spartan Fire) is recalling certain 2022-2024 Gladiator, Metro Star, FC-94 and KME Panther firetrucks. After the vehicle is reversed, the transmission control module (TCM) may fail to achieve the 4th gear lockup needed to initiate the water pump.
Remedy
Dealers will update the TCM software, free of charge. Owner notification letters were mailed April 27, 2023. Owners may contact Spartan Fire customer service at 1-517-543-6400. Spartan Fire’s number for this recall is 23007.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Recall Service Bulletin
RSB23-180-001
APPLIES TO:
This service bulletin applies to certain 2022 through 2024 model year, Gladiator, Metro Star, FC-94, and KME Panther model emergency response chassis cabs built between August 2022 and February 2023.
NHTSA/TC Id:
23V-156 / TC2023-126
CONDITION:
Certain Allison transmissions with split pto operation, C224 and earlier 6th generation controls software levels could fail to perform 4th gear transmission lockup in pump mode after exiting reverse gear.
CORRECTION:
Test 4th gear lock-up after coming out of reverse gear and going into pump mode. If transmission fails to shift to 4th gear lock up in pump mode, local Allison distributor will need to be contacted for software update.
GENERAL INSTRUCTIONS:
Thoroughly review entire service bulletin before starting work. If there are questions or concerns with steps defined in this service bulletin, contact Spartan Fire, LLC. Customer & Product Support Group.
All applicable industry safety standards must be followed when performing work identified in this procedure.
Chronology :
In January 2023 – Spartan Fire received notice from Final Stage Manufacturer of potential issue with 4th gear lock up. Spartan Engineering and customer service started an investigation.
February 2, 2023 – PSR team was created.
February 2 – 14, 2023 – Working with W.W. Williams on issue, potential cause, risk and remedy.
February 14 – 17, 2023 – A population was identified with W.W. Williams. Risk assessment completed internally. Stop ship issued within Spartan Fire.
February 22, 2023 – Escalated the issue to REV Group Management.
March 3, 2023 – REV’s senior leadership approved a voluntary recall for this issue.
12 Affected Products
Vehicles
MAKE | MODEL | YEAR |
KME | PANTHER | 2022-2024 |
SPARTAN FIRE | FC-94 | 2022-2024 |
SPARTAN FIRE | GLADIATOR | 2022-2024 |
SPARTAN FIRE | METROSTAR | 2022-2024 |
10 Associated Documents
Defect Notice 573 Report
RCLRPT-23V156-2539.PDF 214.048KB
Recall Acknowledgement
RCAK-23V156-1786.pdf 645.237KB
Recall 573 Report – March 23, 2023
RCLRPT-23V156-1443.PDF 214.057KB
Safety Bulletin
RCSB-23V156-5064.pdf 534.812KB
Final Stage Manufacturer Notification
RMISC-23V156-5024.pdf 602.833KB
ISSUED Owner Notification Letter(Part 577)
RCONL-23V156-4712.pdf 755.815KB
Manufacturer Notices(to Dealers,etc)
RCMN-23V156-5180.pdf 669.973KB
Recall Quarterly Report #1, 2023-2
RCLQRT-23V156-6697.PDF 211.128KB
Recall Quarterly Report #2, 2023-3
RCLQRT-23V156-0066.PDF 211.362KB
Recall Quarterly Report #3, 2023-4
RCLQRT-23V156-5586.PDF 211.453KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V156&docType=RCL
Heavy Duty Truck Reprogramming
Description:
Designed for flexibility, the USB-Link 3 Wired Edition connects to your PC, tablet, or smartphone with a USB cable, allowing techs to directly connect to a device when working in the field or during signal interruptions.
Built to support the latest protocols (CAN FD, DoIP) and compatible with a wide range of OEM diagnostics software, the USB-Link 3 is our most advanced VCI to date, with the performance and technology you can rely on well into the future.
The USB-Link™ 3 comes with the following:
- Latching USB Cable (PN 404032)
- 9-Pin Deutsch Adapter, 1 Meter (PN 493128)
- J1962 Adapter (16-Pin OBD II, 1 Meter (PN 491113)
The USB-Link™ 3: Wireless is also available (PN 121052).
Specifications
Vehicle Network Protocol Support
CAN FD / J1939 FD / ISO15765 FD - 250K, 500K, 1M b/s with auto baud detection
Single wire CAN (SWCAN)
ISO 11898-3 Fault Tolerant CAN (FTCAN)
Diagnostics Over Internet Protocol (DoIP)
J1708
J1850 VPW (Class 2)
ISO PWM (SCP)
ISO 9141 / KWP2000 (ISO 14230) K/L line
ALDL 9600 and 8192 baud
ATEC 160 baud
Windows® Vehicle Communication API
Windows® Vehicle Communication API
RP1210 a/b/c
J2534 (2004 draft)
J2534-1 partial implementation (commercial vehicle focused)
Operating System Compatibility
iOS
Android™
Windows® 10, 11
Interfaces to Computing Platforms
USB 2.0 (vehicle-to-PC connectivity)
Bluetooth® 2.1 + EDR
Wi-Fi (dual band)
Compatible Software
Detroit Diesel Diagnostic Link
CAT Electronic Technician (On-Highway only)
Cummins Insite
International - ServiceMAXX Fleet Pro
Hino eXplorer
Volvo PTT
VCAD Elite Mack/Volvo
V-MAC Service Tools
Allison DOC® For PC-Service Tool - Protocols Supported: J1939, J1708/J1587, and J1850
Allison DOC® For Fleets (1000/2000) - Protocols Supported: J1939, J1850
Allison DOC® For Fleets (3000/4000) - Protocols Supported: J1939, J1708/J1587
Eaton ServiceRanger
Bendix ACom
WABCO Toolbox
Freightliner ServiceLink
International ABS
International DLB
International Intune
International IPC v2.02
PACCAR DAVIE4
Diesel Laptops Nexiq USB Link 3 Wireless Edition with Repair Information & Diagnostic Software | |
Diesel Laptops Nexiq USB Link 3 Wired Edition with Repair Information & Diagnostic Software |
Nexiq Blue-Link Mini Product Number NQ126015 Nexiq Blue Link Mini™ Vehicle Communication Interface |
NEXIQ Technologies 124032 USB-Link 2 Connector | |
Dearborn DPA5 Pro Universal RP1210 Protocol Adapter |
Daimler Truck
DiagnosticLink Order Site:
DiagnosticLink Direct Link:
https://diagnosticlink.nexiq.com/DTNA/Default.aspx
- 🍇➤Please Note: 1. The HD OBD option is available for heavy truck owners and the OBD/EOBD option is available for other vehicle. 2. Owners need to fix the problem with the truck first before they need clear the error code.
- 🍉➤【Support Full Systems for Heavy Duty Truck】 NL102 PLUS supports read and clear DTC, live data, ECU information for truck all systems. Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more, which are in compliance with J1939, J1708 and J1587 protocols, It includes almost American HD trucks(Class4-Class8), it is recommended that customers confirm before purchase that if they comply with the years and agreements supported by NL102P before purchasing.
- 🍋➤【Professional DPF Regeneration Tool】Force DPF Regen work on Cummings, Detroit, Maxxforce, ISUZU, HINO engine,It covers almost all US trucks, supported advanced features: DPF Regeneration,D-O-C Cleaning Procedures, DPF Regeneration in Parking, DPF Regeneration in Driving, DPF Onboard. NL102P's tool helps you re-awaken the engine power When the diesel p-articulates of the engine accumulate. It will save $800-$2500 for truck owners a year.
- 🍊➤【Excellent Oil Light Reset】NL102 PLUS support Oil service reset work on Cummings, Detroit, Maxxforce engine. when the replacement of engine oil is done, the truck system calculates when to change the engine oil and filter based on vehicle use. An oil change is required whenever indicated by the display, otherwise it will affect the engine maintenance and life. The NL102P truck scanner offers help to reset the Oil Life Reminder (Determine the Oil Service Light), ensure your driving safety.
- 🍐➤【All OBD/EOBD Diagnosis】NL102 PLUS supports both all 12V and all 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. NL102 PLUS can read and earse the trouble codes, determine the MIL (check your Truck engine) and I/M Readiness, Freeze Frame, Live Data, O-xygen Sensor Test, On-Board Monitor, Vehicle Identification Info. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair. In order to ensure that you can use the NL102P, please check the manual before purchasing.
- 🔥2024 TOP INTELLIGENT DIAGNOSTIC SCANNER FOR SEMI COMMERCIAL: ANCEL V5 HD obd2 scanner is specifically designed for 12V & 24V semi trucks,pickup trucks,heavy-duty trucks and 99% of commercial vehicles.you will enjoy✅All System Diagnostic;✅40+ Special Functions;✅ Full Bi-directional Test; ✅Advanced ECU Coding;✅Exclusive Remote Diagnosis Assistance;✅Full System Diagnostic ;✅Wider Vehicle Coverage;✅ Full HD OBD /OBDII /EOBD Modes;✅Top-level Hardware;✅>2 Yrs Free Update,Lifetime Tech Support
- 🚚40+ Resets with ABS SRS DPF Regen: ANCEL V5 HD includes 40+ resets for various systems, including ABS, SRS, DPF, EPB, BMS,DPF Regen, Injector Coding,Parameter Setting,Idle Speed Adjustment, Speed Limit Adjustment and more to fully meet your various needs. These resets can help reset the vehicle's systems to their default settings, eliminating any error codes or malfunctions that may be causing problems.Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛FULL BI-DIRECTIONAL CONTROL, GET YOU TO MALFUNCTIONS DIRECTLY:ANCEL V5 HD bidirectional scan tool supports bidirectional testing, which means it can both read and erase fault codes from the vehicle's ECUs.This feature saves time and money by eliminating the need for multiple scanners or tools.you can quickly identify whether the repair job works or not:Aftertreatment Test, Injector Test,Fuel Pump Test,Cylinder Test,Enigne State Monitor,A/C Compressor Test,Heated Oxygen Sensor Test and more.
- 🚜ADVANCED ECU CODING & PROGRAMMING:ANCEL V5 HD diesel truck scan tool comes with a powerful ECU programming and coding function, allowing you to reprogramme and decode the electronic control units (ECUs) of the vehicle.This feature is especially useful for technicians who need to update software,adjust parameters,or perform other modifications to the vehicle's electronic systems.🚦Note: ECU Coding is not universal to all cars, please check compatibility with VIN before order.
- 🚌OE-Level Full System Diagnostic:ANCEL V5 HD code reader is a professional-grade truck scanner that covers almost all the systems in semi-commercial vehicles, including engine, transmission, ABS, SRS, airbag,instrument panel, etc.It provides accurate and comprehensive diagnostic results,helping you quickly identify and solve vehicle problems,which are in compliance with J1939, 1708,ISO14230,ISO15765,ISO9141,ISO11898,E-J1850 VPW,SAE-J1850 PWM,J1587,CAN TP16,CAN TP20,AN-FD,and DOIP protocols.
- 🔥🔥🔥2024 New Functions Making X7 HD the Top Dog - Big Surprise!!! ANCEL X7 HD heavy duty truck scan tool 10 major functional advantages .✅>Full HDOBD/OBD2 Function ✅>ALL System Diagnostic ✅>40+ Reset Function ✅>Active Test / Bi-Directional Control✅>ECU Coding✅>Graphing Live Data✅>Wide Compatibility ✅>2 Yrs Free Update✅>Remote Operation✅>Bluetooth 5.0 & Wifi In addition, 8 major hardware advantages: ✅>6000 mAh✅>10.1 inch Tablet✅>2G RAM✅>32G ROM (Expandable to 128GB)✅>Data Record & Replay & Print✅>Android 10.0✅>Bluetooth 5.0 & Wifi✅>14 Languages
- 🚛Advanced ECU Coding & Programming - ANCEL X7 HD 10.1inch diesel truck scan tool is equipped with advanced ECU coding, supports Level calibration, Idle speed learning and Adjustment, Camshaft timing control learning, Control unit adaptations, Injector Codes, Read/Write VIN, Road speed limit optional vehicle speed set, etc... PLEASE NOTE that ECU codes are not compatible with all vehicles, please send us your VIN# to check vehicle compatibility.
- 🚛40+ Reset Functions & Bidirectional Control - 2024 newest top truck scanner diagnostic tool, comes with 40+ special services (ECU, Oil Reset, Injector Coding, EPB, ABS, SRS, Suspension, Throttle, etc. and always keep growing), which meet all your various needs for service and maintenance. Please send your VIN# to our 💌 amazon@anceltech.com 💌 to check compatibility.
- 🚛10 Inch All Systems Diesel Scanner & Full HDOBD/OBD2 Modes - ANCEL X7 HD diesel scanner diagnostic tool supports all systems scan, such as Engine, Brake, Retarder, TECU Transmission, Tachograph, ABS, SRS, TPMS, EPB, SAS, ESP, and other vehicle systems, comes with 10 obd2 service modes: read/erase error codes, Data Stream, I/M Readiness, Vehicle Information, Actuations, DTC Lookup, EVAP, view freeze frame, etc.
- 🚛OEM DPF Forced Regen & Cylinder Cutout Test & more - ANCEL X7 HD truck scanner not only supports DPF regeneration, DPF reset, DPF related information reset, DPR state reset, DPD forced regeneration etc, which helps you better solve the exhaust aftertreatment system problems, but also supports activate motor to do exhaust air in ABS Automatically. Moreover, it features TPMS activation, cylinder cut-off and learning functions.
- 🌟【Run Your DPF Cleaner, Longer -Renew, Don't Replace!】Safeguard your truck from breakdowns and and high repair costs with focused DPF care. Opt for HD3400, featuring DPF regen, reset, DPR state control, and more, tailored for engines like Cummins, Detroit, Caterpillar, etc. Imagine this: easy and cost-effective DPF regen saving you from potential $10,000 to $30,000 in repairs. Unlock compliance-free operation for improved fuel efficiency, extended engine life, and significant cost savings
- 🚜【Maximize Caterpillar Engine Trucks' Potential!】HD3400 Plus diesel scanner, exclusively for Caterpillar engines (C7, C9, C11, C13, C15, C32, and more) commonly found in trucks like Caterpillar, Ford Pick-up, Freightliner, Peterbilt, Kenworth. Features include code reading/clearing, live data streaming, ECU retrieval, DPF regeneration and more. Unleash your Caterpillar engine's power!
- 🚛【Designed for Detroit Engine Trucks】ANCEL HD3400 heavy duty truck scan tool is compatible with a wide range of heavy duty commercial trucks – class 7 and class 8, medium duty trucks, light duty trucks and semi-trucks equipped with Detroit engines, including DD13, DD15, DD16, Series 50, Series 60, MBE 900, MBE 4000, OM501, OM502, DDDL 6, and DDDL 7.
- 🚐【Designed for Paccar Engine Trucks】ANCEL HD3400 heavy-duty truck scanner diagnostic tool is specifically designed for Paccar engines, including Paccar PX-7, PX-9, MX-11, MX-13. ❗Note: PACCAR engines post-2016 require a CAN-3 adapter for forced DPF regeneration. If you want to perform DPF regen for your PACCAR engines manufactured after 2016, please find us to get the additional CAN-3 adapter.
- 🌟【Unlock Advanced DPF Regeneration】Our diesel scanner diagnostic tool excels in DPF reset, providing active/forced regeneration and advanced DPF state control. Save time and money on DPF maintenance, making it the top choice for truck diagnostics. Elevate your DPF maintenance with our advanced features!
- 🔎【Comprehensive Full Systems Diagnostic Tool For Truck】Launch Heavy Duty Truck Diagnostic Tool offers OE-Level diagnosis for all systems of heavy truck/Pickups/Bus/Van in compliance with OBD-II Communication Modes 1-10 and J1587, J1708 and J1939 protocols,Including Engine, Transmission, Drivetrain, Suspension, ABS, ESP, Cluster, E-xhaust, P-articular, Suspension, Braking System, Cab Climate, Body Control, Instrument Panel, Fuel System and more.
- 🔥【All OBD/EOBD Diagnosis】This truck scanner diagnostic tool supports both most 12V and 24V truck, and it comes with 6 pin, 9 pin and 16 pin adapters for different interfaces. Our truck scan tool can read codes, erase codes, I/M Readiness, Live data, EVAP Test. . . etc for obd2/eobd cars. Built in a DTC lookup library you can find the related code definition to help you determine if your car needs repair.
- 🚚【Wide Truck Applications】Heavy duty truck scan tool covers almost J1587, J1708 and J1939 protocols heavy duty trucks and OBD II vehicles. Such as Cummins, Paccar, Detroit, Perkins, International, Peterbilt, Allison, Eaton, Ford duty trucks and so on, Covers class 4 (14,001 lbs) through class 8 (33,000 lbs and over) heavy duty trucks. One that meets all the requirements! NOTE:Compatibility will vary on vehicles model and year, please send V-IN to check the compatibility before purchase.
- 💡【Friendly Design, Easy of Use】This heavy duty diagnostic scan tool is plug and play, simple and convenient, The excellent 2.8 inch LCD color screen makes it easy to view the displayed results and gives you a better overview of your car's problem areas and the identified codes. In addition, the processor is super-fast and responds without lagging, providing maximum comfort and efficiency in diagnostic and service work.
- ✨【3 YEARS WARRANTY & FREE LIFETIME UPDATES】The diesel truck scanner is exclusively designed for US truck. it's come With a full service functions and full systems and provides 24/7 technical support, 3 years warranty, 90-days free return for refund or replacement. This diesel scan tool is suitable for auto repair shops and technicians.No subscription fee and free lifetime updates.
- Powerful and Cost-Effective - An essential heavy duty truck scanner designed for heavy duty truck owner-operators and small commercial fleets. With the Diesel Decoder, just plug the diesel scan tool into the diagnostic port and pair with the free smartphone app to access in-depth HD diagnostic information.
- Swift and Adaptable - This heavy duty truck scanner recognizes both diagnostic trouble codes (DTCs) and brand-specific error codes for prevalent heavy-duty truck brands in North America, such as Freightliner, Peterbilt, Mack, Kenworth, Volvo, Western Star, among others and give the ability to perform DPF regens on select model years of Cummins, International, Detroit, Isuzu, Paccar, Mercedes, Hino and Mack/Volvo.
- Instant Repair Help - The diesel scan tool seamlessly connects to the Diesel Laptops comprehensive Diesel Repair Platform library so you can immediately start diagnosing and repairing any problems and get back on the road as soon as possible.
- Continuous Enhancement - Benefit from direct feature additions and updates via the app, our heavy duty truck scanner will continue to have functionality added over time. This removes the hassle of lengthy update processes and the financial strain of renewing costly diagnostic gear.
Last update on 2024-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Spartan Fire, LLC
IMPORTANT: Safety Recall
SAFETY – RECALL – 23007 (23V-156)
Dear Final Stage Manufacturer,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Spartan Fire, LLC has decided that a defect which relates to motor vehicle safety exists in certain model
year 2022-2024, Gladiator, MetroStar, FC-94, and KME Panther model emergency response chassis cabs.
What is the defect?
A population of GEN 6 TCMs may fail to achieve 4th gear lock up when initiating the pump mode
sequence after reversing the vehicle.
This defect could result in failing to engage 4th gear lock up will prevent the vehicle from achieving the
full sequence needed to pump water. This increases the risk of personal injury and equipment damage.
The failure could occur without warning.
Corrective Action:
Contact your local Allison distributor for assistance with facilitating the repair and completing the reflash
of the TCM. There is no cost to the vehicle owner for the recall remedy.
The repair will take approximately 1 hour to complete.
What should the final stage manufacturer do?
On the attached document, you will find a list of chassis cabs Spartan has sold to you. If you agree the
identified chassis, contains a safety defect, you are reminded of your responsibility to notify the National
Highway Traffic Safety Administration (NHTSA) in accordance with 49CFR573. It is a violation of federal
regulation to sell a vehicle subject to a safety recall without the recall first being remedied.
Please contact your local Allison distributor to have the remedy completed at no charge to you or our
mutual customer. Please submit any invoices with Allison.
If you have completed this remedy prior to receiving this letter, please notify and contact Spartan Central
Service at chawarinvsub@spartanmotors.com.
Spartan Fire, LLC.
What will Spartan Fire, LLC do?
Spartan Fire, LLC will identify work with you and affected owners to identify a service center near you
and schedule the work to be completed.
For questions regarding warranty claims, please call 1-800-867-6478.
We regret any inconvenience this situation may cause. Spartan is committed to customer safety and
satisfaction.
Sincerely,
**************************************************************************************************************
Recall Service Bulletin
Recall Service Bulletin
RSB23-180-001
Page 1 of 7 QUA-FR-0290
Rev: 4.0
23007
Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to
vehicles of specific nature in conjunction with industry standards. Professional Technicians should be appropriately trained on industry standards and
have the tools and equipment to perform procedures safely and properly.
DATE: 4/17/2023
APPLIES TO: This service bulletin applies to certain 2022 through 2024 model year,
Gladiator, Metro Star, FC-94, and KME Panther model emergency
response chassis cabs built between August 2022 and February 2023.
NHTSA/TC Id: 23V-156 / TC2023-126
CONDITION: Certain Allison transmissions with split pto operation, C224 and earlier
6th generation controls software levels could fail to perform 4th gear
transmission lockup in pump mode after exiting reverse gear.
CORRECTION: Test 4th gear lock-up after coming out of reverse gear and going into pump
mode. If transmission fails to shift to 4th gear lock up in pump mode, local
Allison distributor will need to be contacted for software update.
CLASSIFICATION: V3
GENERAL INSTRUCTIONS:
Thoroughly review entire service bulletin before starting work. If there are questions or
concerns with steps defined in this service bulletin, contact Spartan Fire, LLC. Customer &
Product Support Group.
All applicable industry safety standards must be followed when performing work identified in
this procedure.
Recall Service Bulletin
Recall Service Bulletin
RSB23-180-001
Page 2 of 7 QUA-FR-0290
Rev: 4.0
23007
Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to
vehicles of specific nature in conjunction with industry standards. Professional Technicians should be appropriately trained on industry standards and
have the tools and equipment to perform procedures safely and properly.
STEP BY STEP INSTRUCTIONS:
1) Perform test of pump shift sequence to determine if unit is affected.
1. With park brake off, put the transmission in reverse and back up several feet.
2. Shift transmission in neutral.
3. Set park brake.
4. Go through pump shift procedure.
a. Shift pump shifter from road to pump mode.
b. Look for Pump Engaged light.
c. Once pump engaged light comes on, shift transmission to drive (D).
At this point, the shifter should be displaying 4- 4, indicating 4th gear lock up is achieved.
2) If it operates as noted above, the truck is operating correctly and requires no further action.
Please contact Spartan Fire LLC at 1-800-867-6478 to notify us that the truck is operating
correctly.
3) If it is displaying 5,1 or range inhibit on the dash, then 4th gear lock up was not achieved and the
Allison TCM will need to have the software updated by the local Allison distributor.
4) Use the webpage below to locate your local authorized Allison distributor to schedule
the software update. https://allisontransmission.com/sales-service-locator
Reference Allison Field Action Letter 2023FA02 on pages 3-7
Recall Service Bulletin
Recall Service Bulletin
RSB23-180-001
Page 3 of 7 QUA-FR-0290
Rev: 4.0
23007
Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to
vehicles of specific nature in conjunction with industry standards. Professional Technicians should be appropriately trained on industry standards and
have the tools and equipment to perform procedures safely and properly.
Recall Service Bulletin
Recall Service Bulletin
RSB23-180-001
Page 4 of 7 QUA-FR-0290
Rev: 4.0
23007
Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to
vehicles of specific nature in conjunction with industry standards. Professional Technicians should be appropriately trained on industry standards and
have the tools and equipment to perform procedures safely and properly.
Recall Service Bulletin
Recall Service Bulletin
RSB23-180-001
Page 5 of 7 QUA-FR-0290
Rev: 4.0
23007
Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to
vehicles of specific nature in conjunction with industry standards. Professional Technicians should be appropriately trained on industry standards and
have the tools and equipment to perform procedures safely and properly.
Recall Service Bulletin
Recall Service Bulletin
RSB23-180-001
Page 6 of 7 QUA-FR-0290
Rev: 4.0
23007
Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to
vehicles of specific nature in conjunction with industry standards. Professional Technicians should be appropriately trained on industry standards and
have the tools and equipment to perform procedures safely and properly.
Recall Service Bulletin
Recall Service Bulletin
RSB23-180-001
Page 7 of 7 QUA-FR-0290
Rev: 4.0
23007
Service Bulletins are intended for use by Professional Technicians only. They are written to guide Professional Technicians in performing service to
vehicles of specific nature in conjunction with industry standards. Professional Technicians should be appropriately trained on industry standards and
have the tools and equipment to perform procedures safely and properly.
**************************************************************************************************************
Spartan Fire, LLC
April 27, 2023
IMPORTANT SAFETY RECALL – 23V-156
This notice applies to the vehicle identification number below.
4S9DU2D91PC560151
GREENWOOD EMERGENCY VEHICLES
530 JOHN DIETSCH BLVD
NORTH ATTLEBORO, MA 02763-1080
Dear Valued Customer,
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Spartan Fire, LLC has decided that a defect which relates to motor vehicle safety exists in certain model
year 2022-2024, Gladiator, MetroStar, FC-94, and KME Panther model emergency response chassis
cabs.
Please note: The Vehicle Identification Number that may be affected by this recall is located at the
top of this letter.
What is the defect?
A population of GEN 6 TCMs may fail to achieve 4th gear lock up when initiating the pump mode
sequence after reversing the vehicle.
This defect could result in failing to engage 4th gear lock up will prevent the vehicle from achieving the
full sequence needed to pump water. This increases the risk of personal injury and equipment damage.
The failure could occur without warning.
Corrective Action:
Contact your local Allison distributor for assistance with facilitating the repair and completing the
reflash of the TCM. There is no cost to the vehicle owner for the recall remedy.
Labor Time:
The repair will take approximately 1 hour to complete.
Spartan Fire, LLC
What You Should Do:
Owners should contact your local Allison distributor to open a case and complete the repair. If you
need further assistance with this notification and cannot locate a distributor, call Spartan at 1-800-
867-6478 to help direct you to your nearest dealer or service provider for repair.
If you have completed this remedy prior to receiving this letter, please notify and contact Spartan
Central Service at chawarinvsub@spartanmotors.com.
Leased Vehicles:
The lessor must notify the lessee by first class mail within ten (10) days from receipt of their owner
notification letter from the manufacturer; both for the initial notification and all subsequent
notifications.
Reimbursement:
If you had this repair performed before you received this letter, you may be eligible to receive
reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this
recall. For more information contact Spartan at 1-800-867-6478.
Information Change:
If you have changed your address, sold or traded your vehicle, please email us at
chawarinvsub@spartanmotors.com to provide updated information.
If the authorized service center has failed or is unable to remedy the defect without charge and within
a reasonable time, contact Spartan at 1-800-867-6478. You may also submit a complaint to the
Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE,
Washington, D.C. 20590 or call the Auto Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go
to http://www.safercar.gov if you feel the manufacturer has failed or is unable to remedy the defect
without charge.
We regret any inconvenience this service may cause you. Your safety and continued satisfaction with
the quality and performance of your chassis is of the utmost concern to us.
Sincerely,
Spartan Fire, LLC
**************************************************************************************************************
Spartan Fire, LLC
IMPORTANT SAFETY RECALL
NHTSA Recall – 23V-156
Spartan Internal Recall No. 23007
Dear Dealer or Service Manager:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Spartan Fire, LLC has decided that a defect which relates to motor vehicle safety exists in certain model
year 2022-2023, Gladiator, MetroStar, FC-94, and KME Panther model emergency response chassis cabs.
A population of GEN 6 TCMs may fail to achieve 4th gear lock up when initiating the pump mode
sequence after reversing the vehicle.
This defect could result in failing to engage 4th gear lock up will prevent the vehicle from achieving the
full sequence needed to pump water. This increases the risk of personal injury and equipment damage.
The failure could occur without warning.
Owners will be notified by mail about the recall and will be instructed to contact their appropriate local
Allison distributor for repair. Allison will work with affected vehicle manufacturers to complete the
reflash of the TCM. There is no cost to the vehicle owner for the recall remedy.
IMPORTANT: Some vehicles may still be in dealer inventory. Federal law requires you to complete the
recall remedy on such vehicles before delivery to the retail customer.
SCHEDULING THE WORK:
1. If the unit is still in the Dealers possession, please contact your local Allison distributor to schedule
the work at your mutual convenience.
2. If you receive an inquiry from the customer, please direct them to their local Allison distributor to
schedule the work at their mutual convenience.
Spartan Fire, LLC
3. Please provide Spartan with the current owner name, address and phone number.
4. If you have previously performed the inspection or the repairs but have not yet submitted an
invoice for the work, we are requesting that you submit the invoice within 10 calendar days.
COMPLETING THE WORK:
Contact your local Allison distributor for assistance with facilitating the repair and completing the reflash
of the TCM. There is no cost to the vehicle owner for the recall remedy. The repair will take
approximately 1 hour to complete.
DOCUMENTING THE WORK:
Please contact your local Allison distributor to open a case and to submit invoices with Allison.
HANDLING AN OWNER WITH NO CONFIRMATION LETTER:
1. If you are contacted by the current owner who has not received a recall letter, you should verify that
they have an affected vehicle by calling Spartan Fire at 800-867-6478 for verification.
2. If their vehicle is part of the population, please direct them to their local Allison distributor for
completion of the repair.
SPARTAN ASSISTANCE:
If you have technical questions or questions regarding warranty claims, please call 800-867-6478
Thank you for your continued support, and we appreciate your partnership.
Sincerely,
Spartan Fire, LLC
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-156
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Spartan Fire, LLC MAR 08, 2023 NHTSA Recall No. : 23V-156 Manufacturer Recall No. : 23007 Manufacturer Information :
Manufacturer Name : Spartan Fire, LLC Address : 1541 Reynolds Road
Charlotte MI 48813
Company phone : 517-588-4700
Population :
Number of potentially involved : 166 Estimated percentage with defect : 100 %
Vehicle Information :
Vehicle 1 : 2022-2024 Spartan Fire Gladiator, Metro Star, FC-94, and KME Panther Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : The emergency response cab chassis affected by this recall are equipped with an Allison Transmission GEN 6 Transmission Control Module (TCM) with C224 software. Spartan Fire Chassis pulled serial numbers for all the GEN 6 TCMs for the Pumper application and sent to W.W.Williams (authorized distributor for Allison that Spartan uses for purchase of Allison TCMs) to verify the software installed to determine the affected cab chassis. Quantity 21 – Gladiator 2022 trucks affected. Quantity 28 – MetroStar 2022 trucks affected. Quantity 13 – FC-94 2022 trucks affected.
Quantity 1 – KME Panther 2022 trucks affected. Quantity 14 – Gladiator 2023 trucks affected.
Quantity 45 – MetroStar 2023 trucks affected. Quantity 39 – FC-94 2023 trucks affected.
Quantity 4 – KME Panther 2023 trucks affected. Quantity 1 – MetroStar 2024 trucks affected.
Production Dates : AUG 30, 2022 – FEB 03, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : A population of GEN 6 TCMs may fail to achieve 4th gear lock up when initiating the pump mode sequence after reversing the vehicle.
FMVSS 1 : NR
FMVSS 2 : NR Part 573 Safety Recall Report 23V-156 Page 2 Description of the Safety Risk : Failing to engage 4th gear lock up will prevent the vehicle from achieving the full sequence needed to pump water. This increases the risk of personal injury and equipment damage.
Description of the Cause : There is an oversensitive refresh rate for the driveline sensor with TCM software level C224, which causes the failure to engage 4th gear lockup. Identification of Any Warning
that can Occur : The failure could occur without warning. Involved Components : Component Name 1 : Transmission Control Module (TCM) Component Description : GEN 6 TCM with C224 code Component Part Number : NR Supplier Identification : Component Manufacturer
Name : Allison Transmission Address : One Allison Way
Indianapolis Indiana 46222
Country : United States Chronology :
In January 2023 – Spartan Fire received notice from Final Stage Manufacturer of potential issue with 4th gear lock up. Spartan Engineering and customer service started an investigation.
February 2, 2023 – PSR team was created.
February 2 – 14, 2023 – Working with W.W. Williams on issue, potential cause, risk and remedy. February 14 – 17, 2023 – A population was identified with W.W. Williams. Risk assessment completed internally. Stop ship issued within Spartan Fire.
February 22, 2023 – Escalated the issue to REV Group Management.
March 3, 2023 – REV’s senior leadership approved a voluntary recall for this issue. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-156
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Description of Remedy :
Description of Remedy Program : Spartan will work with the vehicle owners and Allison Transmission
service centers to help reflash the TCMs. The vehicles that have been remedied would have been covered through the normal warranty process. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : Same component but will be reflashed with the most modern software. W.W. Williams had Allison Transmission change over all of Spartan Fire’s software levels to C232 on February 21, 2023. The remedy was applied in production at Spartan Chassis for affected inventory and vehicles on February 22, 2023. Recall Schedule :
Description of Recall Schedule : Spartan to begin Dealer and Final Stage Manufacturer notifications by
week of April 10, 2023 and owner notifications the week of April 17, 2023.
Planned Dealer Notification Date : APR 10, 2023 – APR 14, 2023
Planned Owner Notification Date : APR 17, 2023 – APR 21, 2023
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-156
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Spartan Fire, LLC MAR 23, 2023 NHTSA Recall No. : 23V-156 Manufacturer Recall No. : 23007 Manufacturer Information :
Manufacturer Name : Spartan Fire, LLC Address : 1541 Reynolds Road
Charlotte MI 48813
Company phone : 517-588-4700
Population :
Number of potentially involved : 166 Estimated percentage with defect : 100 %
Vehicle Information :
Vehicle 1 : 2022-2024 Spartan Fire Gladiator, Metro Star, FC-94, and KME Panther Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : The emergency response cab chassis affected by this recall are equipped with an Allison Transmission GEN 6 Transmission Control Module (TCM) with C224 software. Spartan Fire Chassis pulled serial numbers for all the GEN 6 TCMs for the Pumper application and sent to W.W.Williams (authorized distributor for Allison that Spartan uses for purchase of Allison TCMs) to verify the software installed to determine the affected cab chassis. Quantity 21 – Gladiator 2022 model year trucks affected. Quantity 28 – MetroStar 2022 model year trucks affected. Quantity 13 – FC-94 2022 model year trucks affected.
Quantity 1 – KME Panther 2022 model year trucks affected. Quantity 14 – Gladiator 2023 model year trucks affected.
Quantity 45 – MetroStar 2023 model year trucks affected. Quantity 39 – FC-94 2023 model year trucks affected.
Quantity 4 – KME Panther 2023 model year trucks affected. Quantity 1 – MetroStar 2024 model year trucks affected.
Production Dates : AUG 30, 2022 – FEB 03, 2023
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : A population of GEN 6 TCMs may fail to achieve 4th gear lock up when initiating the pump mode sequence after reversing the vehicle.
FMVSS 1 : NR
FMVSS 2 : NR Part 573 Safety Recall Report 23V-156 Page 2 Description of the Safety Risk : Failing to engage 4th gear lock up will prevent the vehicle from achieving the full sequence needed to pump water. This increases the risk of personal injury and equipment damage.
Description of the Cause : There is an oversensitive refresh rate for the driveline sensor with TCM software level C224, which causes the failure to engage 4th gear lockup. Identification of Any Warning
that can Occur : The failure could occur without warning. Involved Components : Component Name 1 : Transmission Control Module (TCM) Component Description : GEN 6 TCM with C224 code Component Part Number : NR Supplier Identification : Component Manufacturer
Name : Allison Transmission Address : One Allison Way
Indianapolis Indiana 46222
Country : United States Chronology :
In January 2023 – Spartan Fire received notice from Final Stage Manufacturer of potential issue with 4th gear lock up. Spartan Engineering and customer service started an investigation.
February 2, 2023 – PSR team was created.
February 2 – 14, 2023 – Working with W.W. Williams on issue, potential cause, risk and remedy. February 14 – 17, 2023 – A population was identified with W.W. Williams. Risk assessment completed internally. Stop ship issued within Spartan Fire.
February 22, 2023 – Escalated the issue to REV Group Management.
March 3, 2023 – REV’s senior leadership approved a voluntary recall for this issue. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-156
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Description of Remedy :
Description of Remedy Program : Spartan will work with the vehicle owners and Allison Transmission
service centers to help reflash the TCMs. The vehicles that have been remedied would have been covered through the normal warranty process. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : Same component but will be reflashed with the most modern software. W.W. Williams had Allison Transmission change over all of Spartan Fire’s software levels to C232 on February 21, 2023. The remedy was applied in production at Spartan Chassis for affected inventory and vehicles on February 22, 2023. Recall Schedule :
Description of Recall Schedule : Spartan to begin Dealer and Final Stage Manufacturer notifications by
week of April 10, 2023 and owner notifications the week of April 17, 2023.
Planned Dealer Notification Date : APR 10, 2023 – APR 14, 2023
Planned Owner Notification Date : APR 17, 2023 – APR 21, 2023
* NR – Not Reported
SEOCONTENT-END