February 16, 2023 NHTSA CAMPAIGN NUMBER: 23V089000
Turn Signals are not Bright Enough/FMVSS 108
Dim turn signal indicator lights may reduce the visibility of the vehicle to other drivers, increasing the risk of a crash.
NHTSA Campaign Number: 23V089
Manufacturer Dennis Eagle Inc.
Components EXTERIOR LIGHTING
Potential Number of Units Affected 140
Summary
Dennis Eagle, Inc. (Dennis Eagle) is recalling certain 2020-2021 Proview vehicles. The front turn signal indicator lights may not flash brightly enough. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
Dealers will replace the lights, free of charge. The manufacturer has not yet provided a schedule for recall notification. Owners may contact Dennis Eagle customer service at 1-813-440-8136. Dennis Eagles number for this recall is FSI1691-CP013.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
2/6/23 a vehicle was found to have the wrong lamps fitted after investigation the incorrect lamp has been specified
2 Affected Products
Vehicle
MAKE | MODEL | YEAR |
DENNIS EAGLE | PROVIEW | 2020-2021 |
3 Associated Documents
Recall 573 Report-03/17/2023
RCLRPT-23V089-4948.PDF 212.614KB
Noncompliance Notice 573 Report
RCLRPT-23V089-2580.PDF 212.604KB
RCLRPT-23V089-2580
Recall Acknowledgement
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V089&docType=RCL
- (Set of 2 Bulbs) 54SMD 3014 & 3SMD 3030 high Brightness chips per bulb, Working Voltage: 9v-30v
- Fits: 7440A 7440NA 7440 7440SV 7443NA 7441 7443 7443R 7444 7444NA 992 WY21W W21/5W W21W etc. Easy installation, plug and play.
- Application: Turn Signal Lights, Brake Lights, Tail Lights, Side Marker Lights, Corner Lights, Blinker Lights etc. Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage: Non-polarity design, more than 300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution, built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
- 【Compatibility】Designed to fit most motorcycles with 12v working voltage and 8mm mounting hole, such as harly touring, sportster, Atvs, Utvs, Yamaha and honda models and more.Please see the description page for detailed applicable models.
- 【3X Brigter Than Halogen Bulbs】Built in high power SMD chips, prolong life service time and 3x brighter lighting output, which greatly improved your visibility while ridding at night or rainy days, make riding safer.
- 【Durable and Stylish】Aluminum housing, with precise processing and strict testing to ensure the durability and reliability of the product, waterproof, antiscratch, no faded with long time usage.
- 【Easy to Install】Easy installation, you can just direct it if your motorcycle with a 8mm mounting hole; If your motorcycles without a 8mm mounting hole, you can drill a 8mm hole on your motorcycles or ATVs/UTVs/Scooters and then mount it to your motorcycles. IC controlled, no higher flashing.
- 【What You Will Get】2Pcs motorcycle led turn signal lights. You are backed by 3- Month since from order purchasing, please contact us if you have any questions. Solutions will be offered once detail is confirmed.
- 【Compatibility】The SXS street legal kit fit for all ATV, UTV, golf cart, dune buggy or 4x4 project,such as yamaha, honda, polaris and etc.
- 【Including 8Pcs LED Turn Signals】Come with 4pcs amber lights,4pcs rear red turn signals, make your UTV, ATV or 4x4 project street legal. Easy to install, just drill 3/4 inch hole and push these led turn signals in, then mounting them on all 4 corns of your UTV, ATV or 4x4 project.
- 【Street Legal Kit】Upgraded packaging, we have added a bunch of wiring harnesses to make it easier for you to install the turn signals. And flasher replay, it contains everything you needed.
- 【Installation Note】Easy to install for anyone with a basic understanding of 12v electrical systems.But professional install was highly recommend.
- 【What You Will Get】1Set SXS LED street legal kit.You are backed by 3- Month since from order purchasing, please contact us if you have any questions. Solutions will be offered once detail is confirmed.
- Fitment: Compatible with Yamaha FJ-09, FZ-07, FZ-09, FZ6R, FZ8, FZS1000 FZ1, FZS600 FZ6, MT-07, MT-09, YZF-R1, YZF-R3, YZF-R3 ABS, YZF-R3, YZF-R6, YZF-R6, YZF-R6S, and other DC 12V system motorcycles equipped with 10mm mount hole turn signals
- Super Bright: Equipped with 14pcs SMD high brightness chips per turn signals, brighter than halogen bulb, bright light output makes you more noticeable when driving to increase safety. Recommend adding flasher relay if your blinkers get hyper flash
- Flush Mount Easy Installation: Plug and play, no modification required, come with strong adhesive tape for perfect fit, Just splice two wires into turn singnal harness. black wire for negative, yellow wire for turn signal lights
- Waterproof: Made from high quality ABS PC lens, sealed well on the edge, water tight and dustproof, stay illuminated in extremely hot, cold, rainy or snowy days. Great improvement over your old dull blinkers
- Package Including: 1 pair led motorcycle turn signa.l light front indicators. worry-free 180 days manufacture warranty, and friendly customer service
- Compatibility: 12V 12 LED Motorcycle Flowing Turn Signals Indicator Light.
- High quality: Motorcycle turn signal is made of ABS plastic, which has high transparency and good wear resistance that guaranteed by quality; Flexible rubber connection base is not easy to break, effectively prevent fracture.
- New features: New version of the turn signal adds daytime running lights and brake lights. Notice: When the Turn Signal is on, the Daytime Running Light or the Brake Light will turn off; When the Turn Signal is Turned off, The Daytime Running Light or the Brake Light will Returns to its birghtness.
- Easy to Install: Black Wire is Negative, Yellow Wire is Turn Signal Light, White Wire is DRL, Red Wire is Brake Light, Directly Mount to the Original Turn Signal Light Place.
- Buy with confidence: The package contains 2pcs DRL/Turn Signal lights and 2pcs Brake/ Turn Signal lights. Any issues or questions please feel free to contact us, we are always here to satisfy all of you.
- ➤ Hooke Road JK Turn Signal Lights fit for 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 Jeep Wrangler JK, JKU, Sports, Sahara, Freedom, Rubicon Unlimited 2 Door 4 Door
- ➤ These JK turn signal lights are made of durable Light-Weight ABS plastic housing; Rust proof and shockproof. Light Source: LED Light, Lights are in Amber when turn on
- ➤ Super bright, Faster on/off Response time for driving safety
- ➤ Simple Plug and play installation with no modification required
- 【Compatibility】: Universal fit most street standard custom bike cruiser bobber chopper scooter dirt bike with 10mm mounting bolt. Such as compatible with Honda Rebel / Interstate / Fury / Shadow (NOTE: NOT fit Honda Magna,1980-1990 Honda Shadow!!!), Harley, Kawasaki, Suzuki, Yamaha, Triumph and other brands 12V motorbikes.
- 【Top Material】: Our motorcycle turn signals are made of high quality steel and ABS housing. The delicate chrome finish makes it look very fine and makes your car more beautiful. The IP67 waterproof plastic is very resistant to damage and can work even when traveling in heavy rain.
- 【Unique Shape & Super Bright】: We have adopted a very unique exterior design, with high brightness halogen bulbs and a round lampshade to make it look very different and beautiful. This amber motorcycle turn signal can be used as a front and rear turn signal for your front and rear lighting needs. It illuminates brighter than other bulbs, greatly improving visibility and making your driving safer.
- 【Quick Installation】: Two installation methods. If your original blinkers' mounting bolt is 10mm, just remove your stock turn signal light and install the new light on where the old one was removed. Or drill an 10mm hole on where you to mount the new turn signals to DIY your motorcycle.
- 【Package Includes】: You will get 4 motorcycle turn signals, which will be enough for your needs. We will try our best to provide customer good quality at great cost and create you a more enjoyable driving experience. If you have any questions, please feel free to contact us, we will reply as soon as possible.
- Package contents: you will receive 4 pieces motorcycle indicators flowing turn signal lights, black shell, amber lights, the number of turn signals is enough to meet your motorcycle's daily using and replacement, you can also share them with your friends, lover, and family member
- Ultra-bright brightness: mini stalk arrow light motorcycle turn signals lights is very small, with beautiful LED lights; It is composed of 14 ultra-high-brightness amber LED lights, which makes it safer to ride motorcycles at night
- Parameter information: the working voltage: voltage of motorcycle lamp: 12V; Power: about 1.5W; Color temperature: 3500K; Service life: 50000H, can provide efficient and continuous brightness, and please check the related data carefully before buying
- Convenient to install: motorbike LED indicator blinker amber lamp is simple and easy to install and can be directly bolted for general installation; It only takes a few minutes to complete the installation, allowing your motorcycle to emit bright lights in the dark
- Good compatibility: the motorcycle indicators flowing turn signal lights are compatible with a variety of 12 V locomotives, straddle locomotives, motorcycles, electric vehicles, ATVs, off-road motorcycles, cars, etc., practical enough to meet you a plenty of using needs
- 【CANBUS Ready】7440 led bulb with built in resistor, solve the decoding problems of 95% vehicles. Perfectly fits for front/rear turn signals, no more having to hack your wiring to ensure you avoid "bulb-out" warnings, no more hyper flash.
- 【Light Up the Road】Each 7440 bulb has 24pcs high quality LED chips. 24w, 2400lm, truly 500% brighter than halogen bulb, Fit Size: 7440 7440A 7440AL 7440NA 7440LL 7441 W21W WY21W. much brighter which makes it easier to see when your turning.
- 【High-Tech Cooling System】New Gerneration lasfit 7440 T20 Bulb features something called the Intelligent Temperature Control System or ITCS. It features layers of design that keep this bulb cool on the hottest of days, long life span to accompany you on longer journeys.
- 【Drive Safely】Load MINI fuses is a core part of the this bulb's foundation, protect the bulbs and your cars against the instantaneous high current, you will experience greater safety from a brighter light, better performance through its unique design.
- 【1 Year warranty】 365 Days hassle free warranty with U.S. local customer support. Notice: These 7440 amber bulbs are polarity sensitive. If the LED does not light up after inserting, simply remove it, flip the direction and reinstall. Warranty does NOT cover labor, diagnostics, towing, rental car, or any other expense related to an item being defective/damaged.
- 【4PCS Turn Signal Lights】Comes with 4 PCS Turn Signal Lights, Suitable for Motorcycle Motorbike Scooter Quad Cruiser Harley Kawasaki Yamaha Suzuki Off Road
- 【Unique Flowing LED Lighting Design】Y Shape,Equipped with 12LED, Amber Color and Flowing Mode, Cool Design, Great for Turn Signal and Indicators Usage
- 【Water Sealed】IP65 Waterproof, Material in Durable and Waterproof Plastic, Make it Resistant to Water Damage
- 【Light Size】Dimension: 11.8x3x2.5cm, Cable Length: 24.5cm
- 【Easy to Install】Plug Type: Black Line is Negative, Red Line is Positive, Easy Installation, Directly Mount to the Original Turn Signal Light Place
Last update on 2023-03-15 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-089 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Dennis Eagle Inc. Submission Date : MAR 17, 2023 NHTSA Recall No. : 23V-089 Manufacturer Recall No. : FSI1691 – CP013 Manufacturer Information : Manufacturer Name : Dennis Eagle Inc. Address : 2101 47th Street Sarasota FL 34234 Company phone : 201 9463 Population : Number of potentially involved : 140 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2020-2021 DENNIS EAGLE PROVIEW Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : 2-DOOR Power Train : DIESEL Descriptive Information : ALL PRODUCT BUILT Production Dates : JAN 01, 2020 – FEB 10, 2023 VIN Range 1 : Begin : 1D92BGCB0KF791006 End : 1D92KKGB7PG791244 Not sequential Description of Noncompliance : Description of the Noncompliance : Front Directional Indicators fitted to the ProView are not compliant with the requirements of Federal Motor Vehicle Safety Standard FMVSS 1 : 108 – Lamps, reflective devices, and assoc. Equipment FMVSS 2 : NR Description of the Safety Risk : A dim Front Directional Indicator may reduce the visibility of the vehicle to other drivers, increasing the risk of a crash or injury. Description of the Cause : Incorrect lamp fitted Identification of Any Warning that can Occur : N/A Involved Components : Part 573 Safety Recall Report 23V-089 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : COL Indicator LED Component Description : Indicator Hella Component Part Number : 1041339 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : 2/6/23 a vehicle was found to have the wrong lamps fitted after investigation the incorrect lamp has been specified Description of Remedy : Description of Remedy Program : Dealers will be requested to replace the lamps for the correct parts, who will then claim back from Dennis Eagle How Remedy Component Differs from Recalled Component : Incorrect component is European specification identified with a E on the lens and the correct component is a federal specification marked with a DOT Identify How/When Recall Condition was Corrected in Production : We have now sourced the correct lamps and will be fitting from production date 2/20/23 Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 23V-089 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Dennis Eagle Inc. Submission Date : FEB 16, 2023 NHTSA Recall No. : 23V-089 Manufacturer Recall No. : FSI1691 – CP013 Manufacturer Information : Manufacturer Name : Dennis Eagle Inc. Address : 2101 47th Street Sarasota FL 34234 Company phone : 201 9463 Population : Number of potentially involved : 140 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2020-2021 DENNIS EAGLE PROVIEW Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : 2-DOOR Power Train : DIESEL Descriptive Information : ALL PRODUCT BUILT Production Dates : JAN 01, 2020 – FEB 10, 2023 VIN Range 1 : Begin : 1D92BGCB0KF791006 End : 1D92KKGB7PG791244 Not sequential Description of Noncompliance : Description of the Noncompliance : Front Directional Indicators fitted to the ProView are not compliant with the requirements of Federal Motor Vehicle Safety Standard FMVSS 1 : 108 – Lamps, reflective devices, and assoc. Equipment FMVSS 2 : NR Description of the Safety Risk : Incorrectly placed lights may decrease visibility to following drivers, increasing the risk of a crash. Description of the Cause : Incorrect lamp fitted Identification of Any Warning that can Occur : N/A Involved Components : Part 573 Safety Recall Report 23V-089 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : COL Indicator LED Component Description : Indicator Hella Component Part Number : 1041339 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : 2/6/23 a vehicle was found to have the wrong lamps fitted after investigation the incorrect lamp has been specified Description of Remedy : Description of Remedy Program : Dealers will be requested to replace the lamps for the correct parts, who will then claim back from Dennis Eagle How Remedy Component Differs from Recalled Component : Incorrect component is European specification identified with a E on the lens and the correct component is a federal specification marked with a DOT Identify How/When Recall Condition was Corrected in Production : We have now sourced the correct lamps and will be fitting from production date 2/20/23 Recall Schedule : Description of Recall Schedule : NR Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR * NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END