“This site contains affiliate links for which OEMDTC may be compensated” |
March 7, 2023 NHTSA CAMPAIGN NUMBER: 23V148000
Steer Axle Fasteners Not Tightened Properly
Steer axle assembly separation can result in a loss of vehicle control, increasing the risk of a crash.
NHTSA Campaign Number: 23V148
Manufacturer Terex Advance Mixer, Inc.
Components STEERING
Potential Number of Units Affected 20
Summary
Terex Advance Mixer, Inc. (Terex) is recalling certain 2022 Front Discharge Mixer Commander vehicles. The front-drive steer axle fasteners may not have been tightened sufficiently and could come loose, resulting in a complete separation of the axle assembly joints.
Remedy
Meritor will inspect and repair the axle assembly joints, free of charge. Owner notification letters were mailed May 18, 2023. Owners may contact Terex customer service at 1-800-678-5961.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
ISSUE:
Terex Advance has decided, based on information provided by Meritor, that a defect, which relates to motor vehicle safety, exists in certain 2022 Front Discharge Mixer Commander vehicles equipped with front axles built between January 18, 2022, and December 11, 2022. The front-drive steer axle fasteners may have improperly torqued joints.
An improperly torqued joint can loosen over time which may cause the steering axle assembly to separate, resulting in a loss of vehicle control and increasing the risk of a crash.
Chronology :
Mar. 2, 2023 – Terex Advance Mixer and Meritor had a conference call where Meritor shared that 20 axles that where shipped to Terex Advance Mixer had a defect.
Mar. 7,2023 – After internal discussions and analysis of the Meritor information, Terex Advance Mixer deemed this condition to be safety related. Therefore, a 573 defect report was initiated.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
TEREX ADVANCE | FRONT DISCHARGE MIXER | 2022 |
9 Associated Documents
Defect Notice 573 Report
RCLRPT-23V148-6498.PDF 212.703KB
Recall Acknowledgement
RCAK-23V148-2143.pdf 646.403KB
Recall 573 Report-AMENDMENT 2 – 05/16/2023
RCLRPT-23V148-4062.PDF 213.296KB
Owner Notification Letter(Part 577)
RCONL-23V148-1646.pdf 314.645KB
Recall 573 Report – 5/25/2023
RCLRPT-23V148-4956.PDF 213.653KB
Recall 573 Report – 5/23/2023
RCLRPT-23V148-5089.PDF 213.314KB
Recall Quarterly Report #1, 2023-2
RCLQRT-23V148-9203.PDF 211.129KB
Recall Quarterly Report #2, 2023-3
RCLQRT-23V148-7474.PDF 211.366KB
Recall Quarterly Report #3, 2023-4
RCLQRT-23V148-1015.PDF 211.451KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=23V148&docType=RCL
- Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
- Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
- Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
- Accessories included: 1/2" Drive 5" long Extension Bar and 1/2" Drive to 3/8" Drive Reducer
- Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
- PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
- DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
- PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
- COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
- ±3% HIGH PRECISION AND COOL APPEARANCE: 1/2 inch drive torque wrench (10-170ft.-lb/13.6-230.5Nm)has a calibration error range of ±3%, high precision, and comes with a corresponding serial number, which is easy to trace the original data, and you can use it with confidence.Hairich torque wrench not only has superior quality but also has a superior appearance. The classic combination of black and red is fashionable and textured, allowing you to enjoy a visual feast during use.
- PREMIUM MATERIAL AND DURABLE: Experience the ultimate durability and antiskid with the torque wrench. The main body of Hairich torque wrench set is made of chrome vanadium steel alloy, which is more strong and more durable. The head of the inch-pound torque wrench adopts a ratchet design with a reversing device to improve work efficiency. The square knurled handle is made of aluminum titanium alloy, which is ergonomic and comfortable to hold for long-time use.
- DUAL SCALE AND QUICK SETTING: Laser Printed by dual-range(ft-lb and Nm). Our professional torque wrench is easy to read and provides direct unit conversion, When the set torque value is reached, the torque wrench will make an audible and felt click to remind you to stop applying force. Pull down the lock knob and hold it until the torque setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value.
- ERGONOMIC DESIGN AND POWERFUL: Every design of our industrial torque wrench conforms to ergonomic, easy to handle.72-tooth ratchet, 5° ratcheting arc head, a quick-release button for easy loading and unloading, and an aluminum non-slip handle for excellent grip and control. A recent research review that, 72-tooth ratchets are very professional tooth ratchets, you just only rotate 5 degrees to finish it. Not easy to slip and wear, can be used in small spaces, and is more durable and powerful.
- EASY OPERATION AND SAFETY: Thanks to its bidirectional drive ratchet head, our torque wrench can be measured both clockwise and counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque. Notice: At low Nm settings under 5 Nm the "click" sound can be too light to hear.
- 【High Precision&Quick Reading】: 3/8 torque wrench has high contrast and dual range scale( 5-45 Ft-Lb/6.8-61 Nm),making it clear and easy to read. We have professional torque wrench production technology, and after 20000 tests, the calibration error range of the torque wrench is ± 3%, making it an essential helper for you.
- 【Safe and Reliable Operation】: Equipped with a bidirectional drive ratchet head, torque can be measured clockwise or counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque.
- 【High Quality and Durable Material】: Made of hardened chromium vanadium steel alloy (Cr-V). At the same time, the bottom buckle tail plug adopts a red anodizing process to improve the product's oxidation resistance during use and enhance surface wear resistance. 72 tooth ratchet head, made of chromium molybdenum steel. High quality materials resist corrosion and are durable.
- 【Quick Torque Setting】: Simple and fast torque setting, pull down the locking knob and hold it down to rotate to the torque you need. Release the hand and the locking knob will automatically rebound to lock the torque value. And the designer referred to the appearance of the flashlight handle and designed a non slip and labor-saving knurled handle, making it more comfortable and easy to hold when using.
- 【Easy to Store and Widely Use】: You will receive the 3/8-inch drive click torque wrench with a sturdy plastic shell storage box, which is very delicate and durable. Torque wrench is suitable nuts and bolts on various occasions, such as bike, motorcycle, car spark, and is the best helper for you🎁. 🔔 And we provide 12 months warranty. If you have any questions, please feel free to contact us.
- 【3Pcs Torque Wrench Set】 The calibration error range is ±3%, each torque wrench has a calibration certificate. The 3-in-1 torque wrench set can meet your different needs. Including 1/4 inch 20-240in.lb, 3/8 inch 5-45ft.lb, 1/2 inch 20-160ft.lb.
- 【Safe & Reliable】 When the 1/2 torque wrench reaches the preset torque value, it makes a clear "click" sound, accompanied by an obvious hand vibration that reminds you no longer to apply force, prevent damage caused. 72-tooth reversible ratchet head, it can be used both clockwise and counterclockwise directions.
- 【Quick Release Button】 This 3/8 torque wrench has a quick release button with which accessories can easily be installed and removed, the accessories can grip and is not easy to fall down. It is more convenient to use. The torque wrench is made of CR-MO with a higher hardness.
- 【Easy to Set】First pull down the locking knob and hold it down and then start setting the desired torque value. Release the hand and the locking knob will automatically rebound to lock the torque value. If you do not use, please set the torque key to the minimal torque value.
- 【Widely Use】The torque wrenches can satisfy you in bicycle, motorcycle, car, truck and wheel screws, wheel nuts and in the device installation, electrical engineering, etc. We provide 12 months warranty. If you have any questions, please feel free to contact us.
- PORTABILITY: Torque wrench 1/2 inch drive has a durable case for portability or storage
- ADDED COMFORT: Bi-material handle for comfort and grip of the 1/2 torque wrench
- HASSLE FREE USE: Locking feature adjusts quick and easily for hassle free use
- QUICK IDENTIFICATION: Scales stamped into housing showing inch and metric torque settings
- Meets or Exceeds ASME Specifications
- 🔧【𝐌𝐢𝐥𝐢𝐭𝐚𝐫𝐲-𝐠𝐫𝐚𝐝𝐞 𝐒𝐭𝐞𝐞𝐥】ETOOLAB torque wrench utilizes military-grade steel as its base material, coupled with professional surface rust protection methods tailored to usage habits. While ensuring user comfort, it enhances product strength, wear resistance, and rust resistance. offers a more comfortable experience and a longer lifespan!
- 👍【𝐄𝐚𝐬𝐲-𝐭𝐨-𝐑𝐞𝐚𝐝】The scale of this 1/2 drive torque wrench is laser-engraved, using a black background with white markings. dinamometrica de 1/2 ensures clear and easy readability of the scale, even in sunlight. With a dual-scale design, users can conveniently read torque values in two different units according to their preferences, without the need for conversion!
- ⚙️【±𝟑% 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧 & 𝐒𝐢𝐦𝐩𝐥𝐞 𝐋𝐨𝐜𝐤𝐢𝐧𝐠 𝐑𝐢𝐧𝐠】Our torque wrench 1/2 drive meets the high precision standard of ±3% and comes with a traceable serial certificate. You can use it with confidence! Moreover, its graduation ring is tightly locked, with smaller incremental values, ensuring precise and consistent torque output even after multiple uses. This reduces the hassle of frequent adjustments. It is undoubtedly an excellent tool for your work!
- 🔊【𝐋𝐨𝐮𝐝 𝐂𝐥𝐢𝐜𝐤 𝐒𝐨𝐮𝐧𝐝】This torque wrenches has been upgraded to have a louder "Click" sound. We conducted over 25,000 tests to ensure that each product produces a click sound volume of no less than 45dB when the torque value exceeds 34 lbf·ft. When you hear the distinct click sound, it indicates that the preset torque has been reached, signaling you to stop applying force. You no longer need to worry about damaging your mechanical components.
- 💯【𝐔𝐬𝐞𝐫-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲】Our torque wrench set features a 72-tooth dual-directional ratchet head, allowing for easy operation in both clockwise and counterclockwise directions. It is designed with an adjustable locking ring, making it effortless to adjust the preset torque value. Additionally, it includes a quick-release head design, allowing it to replace the wrench head accessories more easily!
- Includes 1-pc. 3/8 in. drive torque wrench; Storage case; Product manual with torque conversion chart
- Wrench emits a click that can be heard and felt when the preset value is reached
- Permanently marked, high-contrast dual-range scale is easy to read, even in low light
- Reversible ratchet head drives in both directions and measures torque in clockwise direction
- Durable all-steel construction has no plastic parts to break or wear out
- Includes 1-pc. 1/4 in. drive micrometer torque wrench (20-200 in.-lb.) with storage case and product manual; 1-pc. 3/8 in. drive micrometer torque wrench (10-80 ft.-lb.) with storage case and product manual; 1-pc. 1/2 in. drive micrometer torque wrench (25-250 ft.-lb.) with storage case and product manual
- Wrenches emit a click that can be heard and felt when the preset value is reached
- Permanently marked, high-contrast dual-range scale is easy to read, even in low light
- Reversible ratchet heads drive in both directions and measure torque in clockwise direction
- Durable all-steel construction has no plastic parts to break or wear out
- 【PRECISION】 - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate . Before shipping, we take 200 times calibration tests to make sure all wrenches performance well .
- 【DURABLE】 - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- 【 RELIABLE & SAFE】: When small torque wrench set torque value is reached, the wrench will emits slight click sound to remind you to stop applying force to prevent overtorque damage to your items.
- 【LONG-LASTING】 - Rust & corrosion protection with our unique and newly invented Chrome finish treatment.
- 【 DUAL-DIRECTION MEASURES & WIDE USE】: The paddle of the mini torque wrench head can adjust the direction of use at any time,so that the wrench can be used both clockwise and counterclockwise directions. More widely used for Installation equipment, Electrical engineering, bicycle/motorcycle maintenance, Product assembly.With a storage box and an instruction manual.
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Terex Advance 7727 Freedom Way Fort Wayne, IN 46818
800-433-6691
Terex Advance
IMPORTANT SAFETY RECALL
SN 23V-148
Date: Draft
Customer Name
Customer Address
Customer City, State & Zip Code
Model Affected: Commander
Subject: Meritor Steer Axle Improperly Torqued Joints
This notice applies to your vehicle, [VIN].
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
ISSUE:
Terex Advance has decided, based on information provided by Meritor, that a defect, which relates to motor vehicle safety, exists in certain 2022 Front Discharge Mixer Commander vehicles equipped with front axles built between January 18, 2022, and December 11, 2022. The front-drive steer axle fasteners may have improperly torqued joints.
An improperly torqued joint can loosen over time which may cause the steering axle assembly to separate, resulting in a loss of vehicle control and increasing the risk of a crash.
ACTION:
What the Owner Must Do:
You are receiving this Notice because you have a truck that has been identified as falling within the suspect series. As the owner, you must immediately inspect the equipment and correct if required:
Terex Advance 7727 Freedom Way Fort Wayne, IN 46818
800-433-6691
• Immediately inspect for the issue, using the inspection guide provided by Meritor and contained in this Notice.
• If the fasteners are found improperly torqued or loose, immediately conduct the repairs outlined or contact Meritor’s On Trac Performance Plus Call Center.
CONTINUED USE:
1. Inform all users about the content of this notice and complete the actions in the Notice before use.
2. If suspect condition is found, immediately remove from service and repair.
3. If suspect condition is not found or once the equipment has been repaired, continue to follow inspection and maintenance instructions as specified in the manuals.
WHAT TEREX WILL DO:
Terex Advance will provide Meritor’s inspection instructions to determine if your vehicle(s) is impacted by this issue. The inspection instructions are contained in this Notice. In addition, Terex will provide the contact information for Meritor’s On Trac Performance Plus Call Center:
Phone: 866-668-7221
Email: ontrac@Meritor.com
Meritor On Trac will inspect and repair improperly torqued joints, as necessary, free of charge.
Please inspect and arrange any necessary repairs as soon as possible, no later than 60 days after receipt of replacement parts.
After contacting Terex Advance, if you are still not able to have the safety defect remedied, without charge and within a reasonable time, you may wish to write the: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington DC 20590 or call 1-888-327-4236 (TTY: 1-800-424-9153): or go to http://www.safercar.gov/http://www.safercar.gov.
If you have had your unit repaired for this issue prior to receipt of this notice, you may be eligible for reimbursement. For more information, please contact Terex Advance at the above contact information.
Terex Advance 7727 Freedom Way Fort Wayne, IN 46818
800-433-6691
If you no longer own this machine, please contact Terex Advance at the above contact information in order to help ensure the new owner receives this important safety information.
If you have leased this equipment to another person, you are required by Federal Law to forward a copy of this notice to the lessee by first-class mail within ten days of your receipt of this notice.
Terex Advance 7727 Freedom Way Fort Wayne, IN 46818
800-433-6691
Customer Name Date
Customer Address
Customer City, State & Zip Code
IMPORTANT SAFETY RECALL
NHTSA Recall No. 23V-148
This notice applies to your vehicle(s), see VIN list below.
Dear Terex Advance Owner,
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
REASON FOR NOTICE:
Terex Advance has decided, based on information provided by Meritor, that a defect, which relates to motor vehicle safety, exists in certain 2022 Front Discharge Mixer Commander vehicles equipped with front axles built between January 18, 2022, and December 11, 2022,. The front-drive steer axle fasteners may have improperly torqued joints.
An improperly torqued joint could result in steering axle assembly separation which may result in a loss of vehicle control, increasing the risk of an accident.
WHAT TEREX WILL DO:
Terex Advance will provide Meritor’s inspection instructions to determine if your vehicle(s) is impacted by this issue. The inspection instructions are contained in this Notice. In addition, Terex will provide the contact information for Meritor’s On Trac Performance Plus Call Center:
Phone: 866-668-7221
Email: ontrac@Meritor.com
Terex Advance 7727 Freedom Way Fort Wayne, IN 46818
800-433-6691
Meritor On Trac will inspect and repair improperly torqued joints, as necessary, free of charge.
WHAT THE OWNER MUST DO:
If you have a truck that has been identified as falling within the suspect series, you are receiving this notification. Terex Advance Mixer is requiring that you take the following immediate action:
• Immediately inspect for the suspect condition, using the inspection guide contained in this notice.
• If Fasteners are found improperly torqued or loose immediately remove vehicle from operation and do not operate until repaired.
• If the fasteners are found improperly torqued or loose, immediately conduct the repairs outlined in this notice or contact Meritor’s On Trac Performance Plus Call Center.
Please inspect and arrange any necessary repairs as soon as possible after receipt of replacement parts.
After contacting Terex Advance, if you are still not able to have the safety defect remedied, without charge and within a reasonable time, you may wish to write the: Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington DC 20590 or call 1-888-327-4236 (TTY: 1-800-424-9153): or go to http://www.safercar.gov/http://www.safercar.gov.
If you have had your unit repaired for this issue prior to receipt of this notice, you may be eligible for reimbursement. For more information, please contact Terex Advance at the above contact information.
If you no longer own this machine, please contact Terex Advance at the above contact information in order to help ensure the new owner receives this important safety information.
If you have leased this equipment to another person, you are required by Federal Law to forward a copy of this notice to the lessee by first-class mail within ten days of your receipt of this notice.
Thank you for your immediate attention on this important matter.
Terex Advance 7727 Freedom Way Fort Wayne, IN 46818
800-433-6691
Our records indicate the following machines registered to you, are involved in Safety Notice 23V-148
Model
Vehicle Identification Number
Model List
VIN Numbers
Terex Advance 7727 Freedom Way Fort Wayne, IN 46818
800-433-6691
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-148
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Terex Advance Mixer, Inc. MAR 07, 2023 NHTSA Recall No. : 23V-148 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Terex Advance Mixer, Inc.
Address : 7727 Freedom Way
Fort Wayne IN 46818 Company phone : 999
Population :
Number of potentially involved : 20 Estimated percentage with defect : NR
Vehicle Information : Vehicle 1 : 2022-2022 Front Discharge Mixer Commander Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Meritor contacted Terex Advance Mixer and informed them that 20 MX-23810 Axles, that were shipped to Terex, had a defect. Meritor provided all of the affected axle serial numbers and Terex determined what vehicles those axles were installed on.
Production Dates : JAN 18, 2022 – DEC 05, 2022
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Meritor MX-23810 axles may contain bolted joints that are suspect to improperly torqued fasteners at the steer arms, king pin caps, caliper to knuckle, and tie rod castle nuts. A improperly torqued fastener may become loose.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Loss of vehicle control or property damage could result from the loosening of a fastener, particularly if the vehicle has multiple fasteners affected by the condition.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 23V-148
Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Component Name 1 : NR Component Description : NR Component Part Number : NR
Supplier Identification : Component Manufacturer
Name : Meritor, Inc
Address : 22021 Skyway Church Rd.
Maxton North Carolina 28364 Country : United States
Chronology :
Mar. 2, 2023 – Terex Advance Mixer and Meritor had a conference call where Meritor shared that 20 axles that where shipped to Terex Advance Mixer had a defect.
Mar. 7,2023 – After internal discussions and analysis of the Meritor information, Terex Advance Mixer deemed this condition to be safety related. Therefore, a 573 defect report was initiated.
Description of Remedy :
Description of Remedy Program : NR How Remedy Component Differs NR from Recalled Component :
Identify How/When Recall Condition NR was Corrected in Production : Recall Schedule :
Description of Recall Schedule : NR
Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-148
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Terex Advance Mixer, Inc. MAY 23, 2023 NHTSA Recall No. : 23V-148 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Terex Advance Mixer, Inc.
Address : 7727 Freedom Way
Fort Wayne IN 46818 Company phone : 999
Population :
Number of potentially involved : 20 Estimated percentage with defect : NR
Vehicle Information : Vehicle 1 : 2022-2022 Front Discharge Mixer Commander Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Meritor contacted Terex Advance Mixer and informed them that 20 MX-23810 Axles, that were shipped to Terex, had a defect. Meritor provided all of the affected axle serial numbers and Terex determined what vehicles those axles were installed on.
Production Dates : JAN 18, 2022 – DEC 05, 2022
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Meritor MX-23810 axles may contain bolted joints that are suspect to improperly torqued fasteners at the steer arms, king pin caps, caliper to knuckle, and tie rod castle nuts. A improperly torqued fastener may become loose.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Loss of vehicle control or property damage could result from the loosening of a fastener, particularly if the vehicle has multiple fasteners affected by the condition.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 23V-148 Page 2 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer
Name : Meritor, Inc
Address : 22021 Skyway Church Rd.
Maxton North Carolina 28364 Country : United States Chronology :
Mar. 2, 2023 – Terex Advance Mixer and Meritor had a conference call where Meritor shared that 20 axles that where shipped to Terex Advance Mixer had a defect.
Mar. 7,2023 – After internal discussions and analysis of the Meritor information, Terex Advance Mixer deemed this condition to be safety related. Therefore, a 573 defect report was initiated. Description of Remedy :
Description of Remedy Program : All customers that could possibly be impacted by this issue will be
contacted and provided inspection instructions to determine if their vehicle is impacted by this issue. If it is parts and any labor costs associated with the remedy of the condition will be reimbursed to the customer. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The components are the same. The parts just need to be properly installed. NR Recall Schedule :
Description of Recall Schedule : NR Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : MAY 18, 2023 – MAY 22, 2023 The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-148
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-148
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Terex Advance Mixer, Inc. MAY 25, 2023 NHTSA Recall No. : 23V-148 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Terex Advance Mixer, Inc.
Address : 7727 Freedom Way
Fort Wayne IN 46818 Company phone : 999
Population :
Number of potentially involved : 20 Estimated percentage with defect : 75 %
Vehicle Information : Vehicle 1 : 2022-2022 Front Discharge Mixer Commander Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Meritor contacted Terex Advance Mixer and informed them that 20 MX-23810 Axles, that were shipped to Terex, had a defect. Meritor provided all of the affected axle serial numbers and Terex determined what vehicles those axles were installed on.
Production Dates : JAN 18, 2022 – DEC 05, 2022
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Meritor MX-23810 axles may contain bolted joints that are suspect to improperly torqued fasteners at the steer arms, king pin caps, caliper to knuckle, and tie rod castle nuts. A improperly torqued fastener may become loose.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Loss of vehicle control or property damage could result from the loosening of a fastener, particularly if the vehicle has multiple fasteners affected by the condition. Results in increased risk of a crash.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 23V-148 Page 2 Component Name 1 : AXLE,FRONT,MERITOR MX810,5.38,W/O DCDL
Component Description : NR Component Part Number : 35637 Component Name 2 : AXLE,FRONT,MERITOR MX-23-810,5.38,W/O DCDL,NEW CAL
Component Description : NR Component Part Number : 39272 Component Name 3 : AXLE,FRONT,MERITOR MX-23-810,5.58,W/O DCDL,NEW CAL
Component Description : NR Component Part Number : 39276 Supplier Identification : Component Manufacturer
Name : Meritor, Inc
Address : 22021 Skyway Church Rd.
Maxton North Carolina 28364 Country : United States Chronology :
Mar. 2, 2023 – Terex Advance Mixer and Meritor had a conference call where Meritor shared that 20 axles that where shipped to Terex Advance Mixer had a defect.
Mar. 7,2023 – After internal discussions and analysis of the Meritor information, Terex Advance Mixer deemed this condition to be safety related. Therefore, a 573 defect report was initiated. The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-148
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Description of Remedy :
Description of Remedy Program : All customers that could possibly be impacted by this issue will be
contacted and provided inspection instructions to determine if their vehicle is impacted by this issue. If it is parts and any labor costs associated with the remedy of the condition will be reimbursed to the customer. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The components are the same. The parts just need to be properly installed. NR
Recall Schedule :
Description of Recall Schedule : No Dealers, we are direct to customer.
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : MAY 18, 2023 – MAY 22, 2023
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 23V-148
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Terex Advance Mixer, Inc. MAY 16, 2023 NHTSA Recall No. : 23V-148 Manufacturer Recall No. : NR Manufacturer Information :
Manufacturer Name : Terex Advance Mixer, Inc.
Address : 7727 Freedom Way
Fort Wayne IN 46818 Company phone : 999
Population :
Number of potentially involved : 20 Estimated percentage with defect : NR
Vehicle Information : Vehicle 1 : 2022-2022 Front Discharge Mixer Commander Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL
Descriptive Information : Meritor contacted Terex Advance Mixer and informed them that 20 MX-23810 Axles, that were shipped to Terex, had a defect. Meritor provided all of the affected axle serial numbers and Terex determined what vehicles those axles were installed on.
Production Dates : JAN 18, 2022 – DEC 05, 2022
VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect :
Description of the Defect : Meritor MX-23810 axles may contain bolted joints that are suspect to improperly torqued fasteners at the steer arms, king pin caps, caliper to knuckle, and tie rod castle nuts. A improperly torqued fastener may become loose.
FMVSS 1 : NR FMVSS 2 : NR
Description of the Safety Risk : Loss of vehicle control or property damage could result from the loosening of a fastener, particularly if the vehicle has multiple fasteners affected by the condition.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
NR
Involved Components : Part 573 Safety Recall Report 23V-148 Page 2 Component Name 1 : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer
Name : Meritor, Inc
Address : 22021 Skyway Church Rd.
Maxton North Carolina 28364 Country : United States Chronology :
Mar. 2, 2023 – Terex Advance Mixer and Meritor had a conference call where Meritor shared that 20 axles that where shipped to Terex Advance Mixer had a defect.
Mar. 7,2023 – After internal discussions and analysis of the Meritor information, Terex Advance Mixer deemed this condition to be safety related. Therefore, a 573 defect report was initiated. Description of Remedy :
Description of Remedy Program : All customers that could possibly be impacted by this issue will be
contacted and provided inspection instructions to determine if their vehicle is impacted by this issue. If it is parts and any labor costs associated with the remedy of the condition will be reimbursed to the customer. How Remedy Component Differs from Recalled Component :
Identify How/When Recall Condition was Corrected in Production : The components are the same. The parts just need to be properly installed. NR Recall Schedule :
Description of Recall Schedule : NR
Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NR – NR The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 23V-148
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
* NR – Not Reported
SEOCONTENT-END