“This site contains affiliate links for which OEMDTC may be compensated” |
September 19, 2022 NHTSA CAMPAIGN NUMBER: 22E076000
Helmets May Not Protect From Impact/FMVSS 218
A helmet that does not provide adequate impact protection increases the risk of injury during a crash.
NHTSA Campaign Number: 22E076
Manufacturer Blackbeards Motorcycle Gear, Inc.
Components EQUIPMENT
Potential Number of Units Affected 522
Summary
Blackbeards Motorcycle Gear, Inc. is recalling certain HamrHead HM-569 helmets in all sizes XXS through XXL, with a manufacture date of December 2020. The helmet may not adequately protect the wearer in the event of a head impact during a crash. As such, these helmets fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 218, “Motorcycle Helmets.”
Remedy
Blackbeards will provide a full refund of the purchase price. Owner notification letters were mailed November 1, 2022. Owners may contact Blackbeards’ customer service at 1-888-878-5281. Blackbeards’ number for this recall is HM5691220.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
BLACKBEARDS MOTORCYCLE GEAR
PO Box 574, Beaufort SC 29901
IMPORTANT SAFETY RECALL
NHTSA Recall No. 22E076
November 1, 2022
Dear Consumer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
WHY IS THIS RECALL BEING CONDUCTED? Blackbeard’s Motorcycle Gear has determined that HamrHead Model HM‐
569 in sizes Medium and XL manufactured in December 2020 failed to conform to Federal Motor Vehicle Safety
Standards (FMVSS) No. 218. Specifically, random samples of the sizes Medium and XL did not meet all S5.1 Impact
Attenuation and S5.2 Penetration compliance standards upon laboratory testing in certain environmental conditions. Helmets affected have a manufacture date of December 2020 that can be found on the warning label inside the helmet. Blackbeards Motorcycle Gear has decided to recall all sizes of the HM‐569 manufactured in December 2020 out of an abundance of caution.
SAFETY RISK: By wearing a noncompliant helmet, the user may not be adequately protected in the event of a crash, increasing the risk of possible personal injury in certain types of accidents.
REMEDY: If you own a HamrHead HM‐569 motorcycle helmet in any size with a manufacture date of December 2020, the manufacturer will send you a refund of the purchase price upon return of the helmet to us. You can check the model number and manufacture date by examining the safety label inside your helmet. This remedy will cost you nothing. The shipping costs to return your helmet will also be covered. After you contact our Recall Services
Department, and your item is verified as being included in this recall, you will receive detailed instructions on preparing your helmet for shipment and returning it to us. Within 15 days of the Recall Services Department receiving your item, a refund will be mailed to you.
WHAT SHOULD YOU DO? Please contact the Recall Services Department in one of the following ways:
By Mail:
Blackbeards Motorcycle Gear
Recall Services Department
PO Box 574
Beaufort, SC 29901
By email: recalls@blackbeardsgear.com
Please be prepared to provide the following information: Original Billing and Shipping Name and Address, Email
Address, Order number, Helmet Model and Size, Original date of purchase, Current correct mailing address
If you have questions or concerns about this recall, you may contact our Recall Information Center at 888‐878‐5281 or email us at: recalls@blackbeardsgear.com
If our Recall Services Department fails or is unable to remedy your recall without charge within a reasonable amount of time, you may contact NHTSA at the address below.
Administrator
National Highway Traffic Safety Administration
1200 New Jersey AVE SE Washington, DC 20590
You may also call the toll‐free Vehicle Safety Hotline at 1‐888‐327‐4236 (TTY: 1‐800‐424‐9153) or go to www.safercar.gov.
We apologize for any inconvenience and thank you for your attention to this safety matter.
Sincerely,
Blackbeards Motorcycle Gear
Chronology :
We were notified on 9/2/2022 by Manuel Maldonado with report # 218-ACT-22-006 and # 218-ACT-22-005 describing test results with specified failures.
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
HAMRHEAD | HM-569 |
4 Associated Documents
Recall Acknowledgement
RCAK-22E076-1631.pdf 823.244KB
Noncompliance Notice 573 Report
RCLRPT-22E076-5997.PDF 242.506KB
Recall 573 Report – September 22, 2022
RCLRPT-22E076-9113.PDF 242.572KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22E076-1693.pdf 77.141KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22E076&docType=RCL
- 【Lightweight】Ultra Lightweight and Durable ABS Shell + Multi-Density EPS liner to meet or exceed FMVSS-218 and DOT Safety Standards.
- 【Ventilated】Multiple vents for optimum ventilation and quick release metal buckle offer solid protection.
- 【Removable & Washable】Equipped with fully removable, washable, and replaceable inner liners that are breathable and absorb sweat.
- 【Protective】The helmet comes with One tinted shield which is on the helmet, beautiful glossy UV protective finish.
- 【Detachable】The nose protector on the helmet can be removed if you needn't it.
- High Resistance ABS Shell With Micrometrically Adjustable Strap
- Meets or Exceeds FMVSS-218 and DOT Safety Standards
- Helmet Liner / Cheek Pads are Lightweight, Soft and Easily Removable and Washable
- Sleek and Lightweight Design Reduces Wind Noise
- Modular Flip-Up Function Anti-Scratch, Anti-Fog and Wide View Clear Visor
- Meets or Exceeds FMVSS-218 and DOT Safety Standards.
- Advanced and extremely durable ABS shell for impeccable impact protection,Designed with quick release buckle and adjustable strap allows riders to easily taking on/off the helmet.
- Detachable Chin Guard,easy to replace.Double visors,clear outer visor is easy to remove and replace, retractable tinted inner lens protect your eyes from strong sunlight, sand
- Ventilation System with mouth vents,the front mouth vent forcing light flow of air helping to keep the rider cool 、comfortable and Breathable.
- High density EPS foam inner,providing good impact absorption, fully removable, washable, and replaceable inner pad,easy to clean; high-quality COOLMAX material fabric that absorbs sweat without compromising comfort or security,keep your head dry and comfortable,more soft and breathable
- Boasting a compact, aerodynamic DOT shell design with sharp and aggressive styling for impeccable impact protection to excel whether short-distance street performance or long-distance touring comfort.
- Multiple conscientiously designed ventilation panels effective in streamlining the cooling process to assist with freshening the rider's experience. Large lower vent shutters for ease of use with riding gloves.
- Trendsetting springs for precise functionality ensuring a superior wind and water sealant layer. Unique 3D molded shield designed to ensure a distortion-free view throughout the entire field of vision.
- Removable Breath Guard rerouting the rider’s breath to reduce shield fogging. Inserted Chin Curtain designed to reduce wind turbulence and noise. Quick-Release Chin Strap for effortless usage.
- Fully removable, washable, and replaceable microfiber inner material that absorbs sweat without compromising comfort or security.
- Helmet shown with optional tinted shield. (Ships with clear shield only)
- Lightweight construction with a strong, durable outer shell to provide maximum protection
- NutraFog II shield which is a ClickRelease shield for fast, easy and tool-free shield replacement
- Velocity Flow Ventilation system designed to provide optimal airflow for comfortable wear
- DOT approved. Meets the FMVSS 218 Standard
- Quick Release Chin Strap Easily Get It On and Off
- Top Quality ABS Shell DOT & FMVSS 218 Approved for Motorcycle Riding, Cycling and Other Outdoor Sports
- Quality Improved Integrated Drop Down Sun Visor, Removable and Replaceable
- Premium Venting Reduces Heat at The Top of The Head
- Solid Flat Black / Gloss Black Design Suitable for Men and Women
- Helmet shown with optional tinted shield. (Ships with clear shield only)
- Lightweight construction with a strong, durable outer shell to provide maximum protection
- NutraFog II shield which is a ClickRelease shield for fast, easy and tool-free shield replacement
- Velocity Flow Ventilation system designed to provide optimal airflow for comfortable wear
- DOT approved. Meets the FMVSS 218 Standard
- 【SAFETY CERTIFICATION】- The Motorcycle Helmets meets the safety standard requirements of DOT FMVSS-218 This means that it has been approved for all road traffic in American. It is a very important safety tool in your outdoor life.
- 【BLUETOOTH HEADSET】- The Motorcycle Bluetooth Helmet uses high-quality Bluetooth technology to provide stereo bass surround sound quality, automatic answering, song playback, and active noise reduction during calls. Ultra strong signal transmission, ultra low power consumption, supports all Bluetooth devices, and can display power directly on the phone.
- 【DUAL VISOR】- The external sunshade is sturdy and elastic, with good impact resistance, while the large area design also maintains a wide field of view; The internal dark sunshade can protect the eyes from sunlight and can be hidden or opened.
- 【COMPOSITE SHELL】 - The body of the technical ABS helmet is of excellent quality, excellent performance and very durable and stable. The interior is made of high density EPS foam, which can be used as a buffer layer and has a strong cushioning effect.
- 【SERVICE AND WARRANTY】- Any questions ,contact us at first time.We are always at your service. FRBRK is fully responsible for all FRBRK products.
- 🚀Please measuring your head before bidding.Take a head measurement with a cloth tape measure.
- 🚀DOT Safety Standard, Comes with a Helmet Bag New In Box
- 🚀Removable and washable padding, adjustable circulation vents with flip-up visor
- 🚀Beautiful glossy UV protective finished
- 🚀S/M/L/XXL size For Adult: 【Sm Centimeter: 55-56CM=21 1/2 - 22inches; Hat Size :6 7/8 - 7inches 】; 【Md Centimeter: 57-58CM=22 1/4 - 22 3/4inches; Hat Size :7 1/8 - 7 1/4inches 】; 【Lg Centimeter: 59-60 CM=23 - 23 1/2 inches; Hat Size :7 3/8 - 7 1/2inches】; 【XL Centimeter: 61-62CM=23 3/4 - 24 1/4 inches; Hat Size: 7 5/8 - 7 3/4inches】;
Last update on 2024-05-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
BLACKBEARDS MOTORCYCLE GEAR
PO Box 574, Beaufort SC 29901 IMPORTANT SAFETY RECALL
NHTSA Recall No. 22E076 November 1, 2022
Dear Consumer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
WHY IS THIS RECALL BEING CONDUCTED? Blackbeard’s Motorcycle Gear has determined that HamrHead Model HM‐ 569 in sizes Medium and XL manufactured in December 2020 failed to conform to Federal Motor Vehicle Safety Standards (FMVSS) No. 218. Specifically, random samples of the sizes Medium and XL did not meet all S5.1 Impact Attenuation and S5.2 Penetration compliance standards upon laboratory testing in certain environmental conditions. Helmets affected have a manufacture date of December 2020 that can be found on the warning label inside the helmet. Blackbeards Motorcycle Gear has decided to recall all sizes of the HM‐569 manufactured in December 2020 out of an abundance of caution.
SAFETY RISK: By wearing a noncompliant helmet, the user may not be adequately protected in the event of a crash, increasing the risk of possible personal injury in certain types of accidents.
REMEDY: If you own a HamrHead HM‐569 motorcycle helmet in any size with a manufacture date of December 2020, the manufacturer will send you a refund of the purchase price upon return of the helmet to us. You can check the model number and manufacture date by examining the safety label inside your helmet. This remedy will cost you nothing. The shipping costs to return your helmet will also be covered. After you contact our Recall Services Department, and your item is verified as being included in this recall, you will receive detailed instructions on preparing your helmet for shipment and returning it to us. Within 15 days of the Recall Services Department receiving your item, a refund will be mailed to you.
WHAT SHOULD YOU DO? Please contact the Recall Services Department in one of the following ways:
By Mail:
Blackbeards Motorcycle Gear Recall Services Department PO Box 574
Beaufort, SC 29901
By email: recalls@blackbeardsgear.com
Please be prepared to provide the following information: Original Billing and Shipping Name and Address, Email Address, Order number, Helmet Model and Size, Original date of purchase, Current correct mailing address
If you have questions or concerns about this recall, you may contact our Recall Information Center at 888‐878‐5281 or email us at: recalls@blackbeardsgear.com
If our Recall Services Department fails or is unable to remedy your recall without charge within a reasonable amount of time, you may contact NHTSA at the address below.
Administrator
National Highway Traffic Safety Administration 1200 New Jersey AVE SE Washington, DC 20590
You may also call the toll‐free Vehicle Safety Hotline at 1‐888‐327‐4236 (TTY: 1‐800‐424‐9153) or go to www.safercar.gov.
We apologize for any inconvenience and thank you for your attention to this safety matter. Sincerely,
Blackbeards Motorcycle Gear
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-076
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Blackbeards Motorcycle Gear, Inc. SEP 22, 2022 NHTSA Recall No. : 22E-076 Manufacturer Recall No. : HM5691220 Manufacturer Information :
Manufacturer Name : Blackbeards Motorcycle Gear, Inc.
Address : BOX 574
Beaufort SC 29901 Company phone : 8557553 Population :
Number of potentially involved : 522 Estimated percentage with defect : 100 %
Equipment Information : Brand / Trade 1 :
Model : HamrHead HM-569 Part No. : – Size : XXS-XXL Function : NR
Descriptive Information : This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Entire imported population of this model will be recalled. Production Dates : DEC 14, 2020 – DEC 16, 2020
Description of Noncompliance :
Description of the Noncompliance :
Blackbeard’s Motorcycle Gear has determined that Model: HM-569 in sizes Medium and XL manufactured in December 2020 failed to conform to Federal Motor Vehicle Safety Standards (FMVSS) No. 218. Specifically, random samples of the sizes Medium and XL did not meet all S5.1 Impact Attenuation and S5.2 Penetration standards upon laboratory testing in certain environmental conditions.
Helmets affected have a manufacture date of December 2020 which can be found on the warning label inside the helmet.
Blackbeards Motorcycle Gear has decided to recall all sizes of the HM-569 manufactured in December 2020 out of an abundance of caution. FMVSS 1 : 218 – Motorcycle helmets FMVSS 2 : NR
Description of the Safety Risk : By wearing a noncompliant helmet, the user may not be adequately protected Part 573 Safety Recall Report 22E-076 Page 2 Description of the Safety Risk : in the event of a crash, increasing the risk of possible personal injury in
certain types of accidents.
Description of the Cause : Quality lapses in fabrication of shell thickness most likely caused by factory operating with limited resources and greatly reduced staffing during the height of the Covid pandemic in China in the fall and winter of 2020. Identification of Any Warning NR
that can Occur : Involved Components : Component Name : HAMRHEAD Component Description : HELMET Component Part Number : HM-569 Supplier Identification : Component Manufacturer
Name : Asia Fiberglass Manufacturing co., Ltd.
Address : Ecological Farm Liuminying
Zhangziyingzhen Daxing Dis Beijing Foreign States 102615 Country : China Chronology :
We were notified on 9/2/2022 by Manuel Maldonado with report # 218-ACT-22-006 and # 218-ACT-22-005 describing test results with specified failures. Description of Remedy :
Description of Remedy Program : Blackbeards Motorcycle Gear will notify all identifiable owners by direct
mail. Owners will be instructed to return the recalled helmet at no charge to them to obtain a full refund of the purchase price. How Remedy Component Differs NR from Recalled Component :
Identify How/When Recall Condition NR was Corrected in Production : The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 22E-076
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Recall Schedule :
Description of Recall Schedule : Blackbeards Motorcycle Gear requires that all consumers call our recall
services number at 1-888-878-5281 or email us at recalls@blackbeardsgear.com to verify that the item purchased is part of this recall, and obtain an RA number before returning the recalled helmet. Once an RA number is issued, Blackbeards Motorcycle Gear will send a prepaid return label for the consumer to use to return the recalled helmet to us at no charge to the consumer. The refund will be processed within 10 days after we receive the recalled item. Blackbeards did not sell to any dealers or distributors so there will be no dealer notifications.
Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : NOV 01, 2022 –
NOV 15, 2022
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR Address : NR
NR Country : NR Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-076
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Submission Date :
Blackbeards Motorcycle Gear, Inc. SEP 19, 2022 NHTSA Recall No. : 22E-076 Manufacturer Recall No. : HM5691220 Manufacturer Information :
Manufacturer Name : Blackbeards Motorcycle Gear, Inc.
Address : BOX 574
Beaufort SC 29901 Company phone : 8557553 Population :
Number of potentially involved : 522 Estimated percentage with defect : 100 %
Equipment Information : Brand / Trade 1 :
Model : HamrHead HM-569 Part No. : HM-569 Size : XXS-XXL Function : NR
Descriptive Information : This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Entire imported population of this model will be recalled. Production Dates : DEC 14, 2020 – DEC 16, 2020
Description of Noncompliance :
Description of the Noncompliance :
Blackbeard’s Motorcycle Gear has determined that Model: HM-569 in sizes Medium and XL manufactured in December 2020 failed to conform to Federal Motor Vehicle Safety Standards (FMVSS) No. 218. Specifically, random samples of the sizes Medium and XL did not meet all S5.1 Impact Attenuation and S5.2 Penetration standards upon laboratory testing in certain environmental conditions.
Helmets affected have a manufacture date of December 2020 which can be found on the warning label inside the helmet.
Blackbeards Motorcycle Gear has decided to recall all sizes of the HM-569 manufactured in December 2020 out of an abundance of caution. FMVSS 1 : 218 – Motorcycle helmets FMVSS 2 : NR
Description of the Safety Risk : By wearing a noncompliant helmet, the user may not be adequately protected Part 573 Safety Recall Report 22E-076 Page 2 Description of the Safety Risk : in the event of a crash, increasing the risk of possible personal injury in
certain types of accidents.
Description of the Cause : Quality lapses in fabrication of shell thickness most likely caused by factory operating with limited resources and greatly reduced staffing during the height of the Covid pandemic in China in the fall and winter of 2020. Identification of Any Warning NR
that can Occur : Involved Components : Component Name : NR Component Description : NR Component Part Number : NR Supplier Identification : Component Manufacturer
Name : Asia Fiberglass Manufacturing co., Ltd.
Address : Ecological Farm Liuminying
Zhangziyingzhen Daxing Dis Beijing Foreign States 102615 Country : China Chronology :
We were notified on 9/2/2022 by Manuel Maldonado with report # 218-ACT-22-006 and # 218-ACT-22-005 describing test results with specified failures. Description of Remedy :
Description of Remedy Program : Blackbeards Motorcycle Gear will notify all identifiable owners by direct
mail. Owners will be instructed to return the recalled helmet at no charge to them to obtain a full refund of the purchase price. How Remedy Component Differs NR from Recalled Component :
Identify How/When Recall Condition NR was Corrected in Production : The information contained in this report was submitted pursuant to 49 CFR §573 Part 573 Safety Recall Report 22E-076
Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Recall Schedule :
Description of Recall Schedule : Blackbeards Motorcycle Gear requires that all consumers call our recall
services number at 1-888-878-5281 or email us at recalls@blackbeardsgear.com to verify that the item purchased is part of this recall, and obtain an RA number before returning the recalled helmet. Once an RA number is issued, Blackbeards Motorcycle Gear will send a prepaid return label for the consumer to use to return the recalled helmet to us at no charge to the consumer. The refund will be processed within 10 days after we receive the recalled item.
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : OCT 19, 2022 – NOV 15, 2022 Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR Address : NR
NR Country : NR Company Phone : NR
* NR – Not Reported
SEOCONTENT-END