Hub May Separate from Axle Wheel End – 2022 Liquid Transport Hays-LTI PTNTT Trailers

September 19, 2022 NHTSA CAMPAIGN NUMBER: 22V700000

Hub May Separate from Axle Wheel End

Hub separation from the wheel end may cause loss of vehicle control, increasing the risk of a crash.

 

NHTSA Campaign Number: 22V700

Manufacturer Liquid Transport, Inc

Components POWER TRAIN

Potential Number of Units Affected 3

 

Summary

Liquid Transport, Inc (Liquid Transport) is recalling certain 2022 Hays-LTI PTNTT trailers. The 42mm cartridge bearing washer within the hub assembly may crack, causing the hub to separate from the axle wheel end.

 

Remedy

Liquid Transport will work with the equipment manufacturer, Dexter Axle Company, to replace the 42mm cartridge bearing washer, free of charge. Owners may contact Liquid Transport’s customer service at 1-229-336-7103.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

“After receiving customer complaints/warranty claims on 16-June of a bearing failure, an investigation was initiated to determine the failure mechanism of the issue. Upon further investigation of the claims, it was discovered the washer associated 42mm cartridge bearing washer was cracking leading to potential bearing and hub assembly performance issues including detachment from the axle.” – Dexter Axle Company

 


22E053 – Hub May Separate from Axle Wheel End – Dexter Axle

 

22E053 – Hub May Separate from Axle Wheel End – Dexter Axle

 


1 Affected Product

Vehicle

MAKE MODEL YEAR
HAYS LTI PTNTT 2022

 


2 Associated Documents

Recall Acknowledgement

RCAK-22V700-8594.pdf 646.545KB

RCAK-22V700-8594

 


Defect Notice 573 Report

RCLRPT-22V700-3973.PDF 243.637KB

RCLRPT-22V700-3973

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V700&docType=RCL

 


 

Bestseller No. 1
Valvoline High Performance SAE 80W-90 Gear Oil 1 QT
  • Protects Against Severe Temperatures To Help Extend Service Life
  • Formulated With Extreme-Pressure Additives To Minimize Gear Wear From Shock Loads
  • Helps Protect Against Gear Wear From Scuffing, Scouring, Corrosion And Pitting
  • Recommended For Conventional Hypoid Differentials And Non-Synchronized Manual Transmissions In Passenger Cars, Light Trucks, Sport Utility Vehicles, Vans And Heavy-Duty Trucks Where An Api-Gl5 Or Gl-4 Fluid Is Specified
Bestseller No. 2
Lucas Oil LUC10046 SAE 80W-90 Heavy Duty Gear Oil - 1 Gallon , White
  • Affordable Solutions
  • Provides rust protection
  • Ideal for shock loading applications
  • Can be used in limited slip differentials
SaleBestseller No. 3
Lucas Oil LUC10043 Oil SAE 80W-90 Heavy Duty Gear Oil - 1 Quart
  • Contains special anti-wear and lubricity agents
  • Helps to control heat
  • Excellent for high performance and heavy-duty applications
  • Fit Type: Universal
Bestseller No. 4
GL-5 80W90 Heavy Duty Automotive Gear Oil - 55 Gallon Drum
  • This item does NOT ship to residential, home business or farm addresses, please scroll down to confirm shipping details prior to purchase.
  • Sinopec GL-5 Heavy Duty Automotive Gear Oil is a range of high-performance gear oils, available in six viscosity grades, formulated with high-quality mineral base oils, and an advanced multifunctional additive system to meet the requirements of API GL-5. Designed for the lubrication of hypoid gear sets in passenger vehicles and commercial vehicles, where they offer excellent extreme pressure (EP) and anti-wear properties.
  • Certifications: API GL-5, MIL L-2015D, MAN 343 Type M1, ZF TE_ML 05A, TE-ML 19B, TE-ML 21A
  • Pack Size: 55 Gallon Drum (200L Volume)
Bestseller No. 5
Triax HD Gear Premium LS 80W-90, GL-5 Limited Slip Ready, Manual Transmissions, Hypoid Gear Systems, Differentials, NATO Military Approved, Widest OEM Specification Range (1 Gallon)
  • WIDEST SPEC RANGE ON THE MARKET: widely compatible with a very large number of hypoid gear systems, differentials, transmissions and axle assemblies.
  • SEVERE SERVICE MAX: Exceptional shear stability and oxidation resistance. Polyphosphate EP proprietary additive system offers substantial improvement in performance over previous generation, low cost, gear oils
  • BUILT IN LIMTED SLIP ADDITIVE - Does not require "additional" LS additive. Its built into the product, optimized for all limited slip differentials, including those with built in wet brakes.
  • OUTSTANDING SCUFFING PROTECTION - Superb gear and syncron protection, facilitating extremely long transmission life. Exceeds Load Stage 13 extreme pressure requirements beyond 120,000 lbs / sqi.
  • SHEAR STABLE - Excellent thermal stability and high load capacity without viscosity breakdown, facilitates excellent film strength under high loads, high temp and high shear conditions.
SaleBestseller No. 6
Genuine Ford Fluid XY-80W90-QL SAE 80W-90 Premium Rear Axle Lubricant - 1 Quart
  • Meets warranty requirements and is recommended for conventional and limited-slip differentials of passenger cars, light trucks, vans and buses
  • Formulated for automotive use
  • Use according to owner guide recommendations
  • Recommended by Ford Motor Company
  • Motorcraft SAE 80W-90 Premium Rear Axle Lubricant is an excellent multi-purpose extreme pressure lubricant
Bestseller No. 7
Lube King LU18905P 5 Gallon44; 80W90 Multi-Purpose Gear Lubricant Oil
  • 5 gallon 80w90 multi-purpose gear lubricant oil
  • Specially formulated with high viscosity index base oils & a multi-functional additive system
  • Smooth & quiets operations & provides outstanding protection against scoring, rust, foam,
  • Dimension - 12.5 x 12.5 x 15.5 in.
  • Item weight - 41.79 lbs.
Bestseller No. 8
Quicksilver 8M0128380 80W-90 Motorcycle Hypoid Gear Oil – 1 Quart,Grey
  • PERFORMANCE – Used in shaft drive or separate clutch transmissions for optimum performance and gear longevity
  • PROTECTION – Provides maximum gear protection against wear, corrosion, and oxidation all while maintaining optimum performance
  • PEACE OF MIND – Meets or exceeds API GL-5 / MT-1 & SAE J236
  • HARSH CONDITIONS – Protects against harsh conditions wearing the surface of the gears
  • FITS EVERYTHING – For use in shaft drive or separate clutch transmission applications
Bestseller No. 9
Driven Racing Oil GL-4 Conventional Gear Oil 80w-90 32oz (2 Pack)
  • GL-4 protects yellow metals
  • Provides proper synchronization to prevent clashing in synchronized manual transmissions
  • Contains high-quality base oils for high shear race protection
  • Extended change intervals
  • Recommended for any race or street performance application where GL-4 gear oil is required
Bestseller No. 10
Lucas Oil 10043-12 80w-90 Gear Oil Case/12
  • Lucas Oil Heavy Duty Gear Oil
  • SAE Grade 80W-90
  • Case of (12) 1 Quart Bottles
  • Typical Properties:

Last update on 2022-11-14 / Affiliate links / Images from Amazon Product Advertising API

This product was presentation was made with AAWP plugin.

 

Leave a Comment

Share to...