Excessive Exhaust Gas May Cause Fire – 2023-2024 Van Hool CX35 & CX45

“This site contains affiliate links for which OEMDTC may be compensated”

May 13, 2024 NHTSA CAMPAIGN NUMBER: 24V332000

Excessive Exhaust Gas May Cause Fire

Excessive exhaust gas can result in smoke poisoning or cause a vehicle fire, increasing the risk of injury.

 

NHTSA Campaign Number: 24V332

Manufacturer ABC BUS Inc

Components EQUIPMENT

Potential Number of Units Affected 230

 

Summary

ABC BUS Inc. is recalling certain 2023-2024 Van Hool CX35 and CX45 vehicles equipped with Hydronic L-II heaters. The burner units may release excessive exhaust gas.

 

Remedy

Owners are advised not to use the heaters until they have been repaired. Dealers will inspect, rework, and calibrate the heaters to avoid excessive exhaust gas values, free of charge. Owner notification letters are expected to be mailed May 27, 2024. Owners may contact ABC Bus customer service at 1-407-287-3184. ABC Bus number for this recall is 24E030.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Chronology :

April 24 2024 ABC Bus, Inc. learned of an equipment recall filed by Eberspacher Climate Control System Intl., 24E030. ABC Bus, Inc. is the importer into the US of buses manufactured by Van Hool in Europe.

April 25, 2024 to May 13, 2024 ABC Bus, Inc. investigated whether the Eberspacher component is installed on Van Hool buses imported into the United States, because the Eberspacher Part 573 report did not list Van Hool as a purchaser of the subject component. ABC Bus, Inc. confirmed that the subject component was installed on a number of Van Hool buses imported into the United States by ABC Bus, Inc..

On May 13, 2024, ABC Bus, Inc. filed a Part 573 report with NHTSA to address the vehicles imported by

ABC Bus, Inc. containing the subject component.

 


24E030 – Excessive Exhaust Gas May Cause Fire – Eberspacher Hydronic L-II Heaters

 

24E030 – Excessive Exhaust Gas May Cause Fire – Eberspacher Hydronic L-II Heaters

 


4 Affected Products

Vehicles

MAKE MODEL YEAR
VAN HOOL CX35 2023-2024
VAN HOOL CX45 2023-2024

 


2 Associated Documents

Defect Notice 573 Report

RCLRPT-24V332-4391.PDF 214.566KB

 


Recall Acknowledgement

RCAK-24V332-6134.pdf 645.695KB

 


Latest Recalls Documents

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=24V332&docType=RCL

 


 

Bestseller No. 1
HOTSTART ENGINE HEATER TPS151GT10-000 COOLANT PRE-HEATER - Original - 1 YEAR WARRANTY
  • MFG. LIST $195.39. Molded from high Impact rust & corrosion resistant "PPS".
  • Vibration and shock tested. Incoloy element for longer service life.
  • Thermostat regulates coolant temperature between 100-120 degrees F.
  • Greatly reduced heat loss for more efficient operation.
  • All parts are field replaceable — Not a throw - away design.
Bestseller No. 2
***Original*** HOTSTART Engine Heater TPS151GT10-000 - Coolant preheater | 1500 watts 120V 12.5A | ON: 100°F (38°C) – Off 120°F (49°C) | 1 Year Warranty!
  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Heating Fluid: Engine Coolant, Water, other No pump needed (thermosiphon principle)
  • Engine Displacement: 350 – 500 CID (5.7–8.2 L)
  • Volts: 120v - kW: 1.5 - AMPS: 12.5 - 60Hz
  • Temperature Range: ON: 100°F (38°C) – OFF 120°F (49°C)
SaleBestseller No. 3
Kat's 13150 1500 Watt Aluminum Circulating Tank Heater (13150X)
  • Uses versatile strap type mounting
  • Thermostatically controlled from 135 to 175 degrees
  • Requires moderate mechanical ability to install
  • Die cast aluminum design for corrosion and impact resistance
  • 1500 Watt
Bestseller No. 4
Zerostart 2204037 Circulation Heater, 5/8" Diameter Inlet/Outlet | CSA Certified | 120 Volts | 1500 Watts
  • Thermostatically controlled: Opens at 190 Degree F, closes at 151 Degree F
  • Vertical installation only
  • Rugged cast aluminum construction is corrosion and impact resistant. Copper heating element provides excellent heat transfer.
  • Circulation Heater has servicable parts for replacement of thermostat, cord, or heating element
  • Dimensions: 2-3/4" x 8-1/2" (7cm x 21. 6cm)
Bestseller No. 5
***Original*** HOTSTART Engine Heater TPS151GT8-000 | Coolant Preheater | 1500 watts 120V 12.5A | ON: 80°F (27°C) – Off 100°F (38°C) |1 Year Warranty!
  • Pre-Heat: Diesel and Gas engines, construction equipment, trucks, marine and industrial applications
  • Heating Fluid: Engine Coolant, Water, other No pump needed (thermosiphon principle)
  • Engine Displacement: 350 – 500 CID (5.7–8.2 L)
  • Volts: 120v - kW: 1.5 - AMPS: 12.5 - 60Hz
  • Temperature Range: ON: 80°F (27°C) – OFF 100°F (38°C)
Bestseller No. 6
Zerostart 3308003 Series 8000 Circulation Heater, 5/8" Diameter Inlet/Outlet | CSA Approved | 120 Volts | 1500 Watts
  • Convenient design and universal mounting strap
  • Integral check valve supports extensive range of plumbing configurations, detachable power cord enhances ease of installation
  • Top-side location of power cord connection provides damage protection from road debris and chemicals
  • Temperature sensing safety thermostat provides overheat protection 147˚F (64˚C) ON - 185˚F (85˚C) OFF
  • CSA approved; volts: 120, watts: 1, 500; plug type: 120 volt, 15 amp; inlet/outlet size: 5/8” (16mm)
Bestseller No. 7
Dorman 902-611 Coolant Heat Storage Tank Pump Compatible with Select Toyota Models
  • Direct replacement - this coolant heat storage tank pump is designed to match the fit and function of the original pump on specified applications
  • Restores functionality - reliable replacement for an original pump that has failed due to fatigue
  • Durable construction - this part is made from quality materials to ensure reliable performance and long service life
  • Trustworthy quality - backed by team of product experts in the United States and more than a century of automotive experience
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
Bestseller No. 8
Hotstart Kim TPS101GT10 Series 120V, 1000 Watt Coolant Heater
  • Thermostatically controlled - turns on at 100 degrees and off at 120 degrees F.
  • Rust-free, resists corrosion, exceptional tensile strength.
  • Vibration and shock tested to extreme limits to guarantee durability.
  • Greatly reduced heat loss for more efficient operation.
  • 5/8" Hose Nipples molded onto the heater for easy connection to standard heater hose.
Bestseller No. 9
JUNYIZE Water Heater 5KW 12V Gasoline Diesel Parking Water Heater with Remote Control, Hydronic Heat Conduction Coolant Heating Engine for Trucks Vans RV Trailers Cars Vehicle (Controller with Screen)
  • [Engine protection]: It’s well known that starting a vehicle can wear and tear the engine in cold winter. The preheating function of our heater perfectly solves the problem of cold start. It’s an independent heating system and installed between the engine and the water tank in series, achieving heating of the cabin and engine w/out starting the car. It overcomes the limitations of heating systems relying on engines. This will extend car life by more than 30%, and greatly reduce maintenance costs
  • [Efficient and Rapid]: When you start the parking heater, it heats the coolant in the water tank and then transmits the warm air to the cabin through a fan. Junyize parking heater can not only heat inside the car but also preheat the engine. In just 15 minutes, ensuring a comfortable environment. When the water temperature reaches 78°C, it automatically stops and the remote control will prompt that the heating is complete. The entire process only consumes up to 0.2L/0.05 gal of fuel.
  • [Remote Control]: Our parking water heater is equipped with a smart LCD display and remote control. Take control of your heating experience with our 33ft long-distance remote control which adjusts the temperature effortlessly, even before stepping into your vehicle. Preheat your vehicle from outside, and keep the interior warm. The large LCD allows you to get a clear view of your heater's status. Perfect for chilly winter mornings.
  • [Wide Application]: As a universal heater for both diesel and gasoline, it fits any 12V motor vehicle. Our heater is suitable for altitudes below 16400 feet/5000 m and operates smoothly in surrounding temperatures ranging from -104 °F to 104 °F / -40 °C to 40 °C. As a heating companion for vehicles, it is widely used for heating the engines of cars, RVs, RV trucks, caravans, campers, pickup, trucks, trailers, snowmobiles, snowmobile trailers, ships, etc.
  • [Points for Attention]: It is necessary to prevent the surrounding objects of the heater from being affected or even damaged by high temperatures. When installing the oil pump, always pay attention to the nozzle tilting upwards, and The best installation angle is between 15.1° and 35°; Can be between 35° and 90°; It must not be between 0°and 15°. It involves extracting a small amount of fuel from the original vehicle fuel tank. New energy vehicles require an external tank.
Bestseller No. 10
JEENDA Engine Block Heater TPS151GT10-000 590-893 1500W 120V Option 100-120F Coolant Pre-Heater for Generators Trucks Gas Engines
  • Part Number:TPS151GT10-000 590-893 590893 084918G
  • 1500W 120V Option 100-120F.Inlet & Outlet Size : 16mm(0.629").
  • Heat Power : 0.5KW, 1.0KW, 1.5KW .Voltage Range : 120V
  • Applications:For diesel and gas engines in genset, heavy duty mobile equipment, marine and industrial,trucks and some cars.
  • If you're not 100% satisfied with this Coolant Pre-Heater, simply return it for a replacement or a full refund in 30 days.

Last update on 2024-05-23 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...