NHTSA ID Number: 11006912
Manufacturer Communication Number: 2024.26.100_082024.pdf
TSB/Document Date: 2024-09-04
Summary
Tesla
does not provide physical owner's manual copies. Instead, all available owner’s manual content is integrated into the vehicle software, and only the content relevant for a given vehicle, based on vehicle configuration and software version installed, is displayed on its touchscreen. This file contains all available owner’s manual content for the vehicle converted to PDF format, and given the distribution method and NHTSA’s submission format requirements, it is the best available representative copy of owner’s manual content. However, a customer who accesses the owner’s manual via their vehicle’s touchscreen would only see the parts of this PDF file that are relevant to their vehicle.
What this alert means:
Charging has been interrupted because the Mobile Connector has detected a high temperature in the charge handle that
connects to your vehicle's charge port.
What to do:
Make sure the Mobile Connector is fully inserted into your vehicle's charge port inlet.
Inspect the charge port inlet and the Mobile Connector handle for any obstructions or moisture. Make sure any obstruction in
the charge port or Mobile Connector handle has been removed and any moisture has been allowed to dry, then try re-inserting
the Mobile Connector handle into the charge port.
Also make sure the charge handle of the Mobile Connector is not covered by anything, and that there is no heat source nearby.
Owner's Manual
542
Troubleshooting
If the alert persists in normal ambient temperatures (under 100°F or 38°C), and occurs during multiple charging attempts, this
may indicate a condition affecting the Mobile Connector or your vehicle. It is recommended that you schedule service at your
convenience.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 92 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.
UMC_a010
Mobile Connector to adapter connection hot
Let cool - Plug adapter fully into Mobile Connector
What this alert means:
Charging has been interrupted because the Mobile Connector has detected a high temperature at the connection between the
wall plug adapter and the control box.
What to do:
Make sure the wall plug adapter is fully connected to the Mobile Connector control box.
Also make sure the wall plug adapter is not covered by anything, and that there is no heat source nearby.
After unplugging from the power source (wall outlet), inspect the wall plug adapter connection and the Mobile Connector
control box connection for any obstructions or moisture. Make sure any obstruction has been removed and any moisture has
been allowed to dry, then try re-inserting the wall plug adapter into the Mobile Connector and then connecting to the power
source (wall outlet).
Once the Mobile Connector control box temperature has decreased and any obstruction has been removed, the alert should
clear and charging should possible.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 92 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.
UMC_a011
Charging equipment communication error
Try again or try different equipment
What this alert means:
Your vehicle is unable to charge because it cannot communicate effectively with the Mobile Connector. The Mobile Connector
cannot confirm via proximity detection that the charge handle is fully connected to your vehicle.
What to do:
First, confirm the lack of effective communication is caused by the Mobile Connector rather than an issue with your vehicle.
This is usually the case.
To confirm this, try charging the vehicle using different external charging equipment.
• If the vehicle begins charging, the issue was likely with the Mobile Connector.
• If the vehicle still does not charge, the issue may be with the vehicle.
Inspect the charge port inlet and the Mobile Connector handle for any obstructions (use a flashlight as necessary). Make sure
any obstruction has been removed and any moisture has been allowed to dry, then try re-inserting the Mobile Connector
handle into the charge port.
543
Owner's Manual
Troubleshooting
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 92 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.
For more information on charging, see Charging Instructions on page 389.
UMC_a012
Charging equipment communication error
Try again or try different equipment
What this alert means:
Your vehicle is unable to charge because it cannot communicate effectively with the Mobile Connector. The Mobile Connector
detects that it cannot generate or maintain a valid control pilot signal.
What to do:
First, confirm the lack of effective communication is caused by the Mobile Connector rather than an issue with your vehicle.
This is usually the case.
To confirm this, try charging the vehicle using different external charging equipment.
• If the vehicle begins charging, the issue was likely with the Mobile Connector.
• If the vehicle still does not charge, the issue may be with the vehicle.
Inspect the charge port inlet and the Mobile Connector handle for any obstructions (use a flashlight as necessary). Make sure
any obstruction has been removed and any moisture has been allowed to dry, then try re-inserting the Mobile Connector
handle into the charge port.
This alert is usually specific to external charging equipment and power sources and does not typically indicate an issue with
your vehicle that can be resolved by scheduling service.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 92 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.
For more information on charging, see Charging Instructions on page 389.
UMC_a013
Wall plug adapter error - Charge rate reduced
Plug adapter fully into Mobile Connector and retry
What this alert means:
Your Mobile Connector is unable to communicate with the wall plug adapter. Because your Mobile Connector cannot monitor
the wall plug adapter temperature, charge current is automatically reduced to 8A.
What to do:
1. Unplug your Mobile Connector, including the wall plug adapter, completely from the wall outlet.
2. Make sure the connection between the wall plug adapter and the main body of your Mobile Connector is secure.
a. Disconnect the wall plug adapter completely from the main body of your Mobile Connector.
Owner's Manual
544
Troubleshooting
b. Fully reinsert the wall plug adapter into the main body of your Mobile Connector by pushing it into the socket until it
snaps into place.
3. Try charging again by plugging the Mobile Connector, including wall plug adapter, fully into the wall outlet.
4. If the alert persists, try using a different wall plug adapter (see steps above to make sure the adapter is fully connected to
your Mobile Connector).
a. If the alert is no longer present, the issue is likely with the wall plug adapter you were using previously.
b. If the alert persists, the issue is likely with your Mobile Connector.
If needed, obtain another wall plug adapter or Mobile Connector.
In the meantime, you can continue to charge with the same equipment. The charge rate will be reduced, as charge current will
be limited to 8A while this condition persists.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 92 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.
UMC_a014
Wall plug adapter error - Charge rate reduced
Plug adapter fully into Mobile Connector and retry
What this alert means:
Your Mobile Connector is unable to communicate with the wall plug adapter. Because your Mobile Connector cannot identify
the type of wall outlet the wall plug adapter is connected to, charge current is automatically reduced to 8A.
What to do:
1. Unplug your Mobile Connector, including the wall plug adapter, completely from the wall outlet.
2. Make sure the connection between the wall plug adapter and the main body of your Mobile Connector is secure.
a. Disconnect the wall plug adapter completely from the main body of your Mobile Connector.
b. Fully reinsert the wall plug adapter into the main body of your Mobile Connector by pushing it into the socket until it
snaps into place.
3. Try charging again by plugging the Mobile Connector, including wall plug adapter, fully into the wall outlet.
4. If the alert persists, try using a different wall plug adapter (see steps above to make sure the adapter is fully connected to
your Mobile Connector).
a. If the alert is no longer present, the issue is likely with the wall plug adapter you were using previously.
b. If the alert persists, the issue is likely with your Mobile Connector.
If needed, obtain another wall plug adapter or Mobile Connector. In the meantime, you can continue to charge with the same
equipment. The charge rate will be reduced, as charge current will be limited to 8A while this condition persists.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 92 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.
UMC_a015
Wall plug adapter error - Charge rate reduced
Plug adapter fully into Mobile Connector and retry
What this alert means:
545
Owner's Manual
Troubleshooting
Your Mobile Connector is unable to communicate with the wall plug adapter. Because your Mobile Connector cannot identify
the type of wall outlet the wall plug adapter is connected to, charge current is automatically reduced to 8A.
What to do:
1. Unplug your Mobile Connector, including the wall plug adapter, completely from the wall outlet.
2. Make sure the connection between the wall plug adapter and the main body of your Mobile Connector is secure.
a. Disconnect the wall plug adapter completely from the main body of your Mobile Connector.
b. Fully reinsert the wall plug adapter into the main body of your Mobile Connector by pushing it into the socket until it
snaps into place.
3. Try charging again by plugging the Mobile Connector, including wall plug adapter, fully into the wall outlet.
4. If the alert persists, try using a different wall plug adapter (see steps above to make sure the adapter is fully connected to
your Mobile Connector).
a. If the alert is no longer present, the issue is likely with the wall plug adapter you were using previously.
b. If the alert persists, the issue is likely with your Mobile Connector.
If needed, obtain another wall plug adapter or Mobile Connector. In the meantime, you can continue to charge with the same
equipment. The charge rate will be reduced, as charge current will be limited to 8A while this condition persists.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 92 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.
UMC_a016
Mobile Connector control box temperature high
Maximum charge rate reduced
What this alert means:
Charge current has been temporarily reduced because the Mobile Connector has detected increased temperature inside its
control box housing.
What to do:
Make sure the Mobile Connector is not covered by anything, and that there is no heat source nearby. If the problem persists in
normal ambient temperatures (under 100°F or 38°C), service is required.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 92 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.
UMC_a017
Charge rate reduced - Wall plug temperature high
Wall outlet and wiring inspection recommended
What this alert means:
High temperature detected by Mobile Connector alerts indicate the outlet used to charge is becoming too warm, so charging
has been slowed to protect the outlet.
This is not typically an issue with your vehicle or your Mobile Connector, but rather an issue with the outlet. A warm outlet may
be caused by a plug that is not fully inserted, a loose building wiring connection to the outlet, or an outlet that is beginning to
wear out.
What to do:
Owner's Manual
546
Troubleshooting
Make sure your adapter is fully plugged into the outlet. If charging speed does not return to normal, contact an electrician to
inspect the outlet and building wiring connections to the outlet and complete any repairs needed.
If the outlet is worn, it should be replaced with a high-quality outlet. Consider upgrading to a Tesla Wall Connector for greater
convenience and highest charging speed.
UMC_a018
Charge rate reduced - Handle temperature high
Check charge handle or charge port for debris
What this alert means:
Charge current has been temporarily reduced because the Mobile Connector has detected increased temperature in the
charge handle that connects to your vehicle's charge port.
What to do:
Make sure the Mobile Connector is fully inserted into your vehicle's charge port inlet.
Inspect the charge port inlet and the Mobile Connector handle for any obstructions or moisture. Make sure any obstruction in
the charge port or Mobile Connector handle has been removed and any moisture has been allowed to dry, then try re-inserting
the Mobile Connector handle into the charge port.
Also make sure the charge handle of the Mobile Connector is not covered by anything, and that there is no heat source nearby.
If the alert persists in normal ambient temperatures (under 100°F or 38°C), and occurs during multiple charging attempts, this
may indicate a condition affecting the Mobile Connector or your vehicle. It is recommended that you schedule service at your
convenience.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 92 for more details.
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.
UMC_a019
Mobile Connector to adapter connection hot
Maximum charge rate reduced
What this alert means:
Charge current has been reduced because the Mobile Connector has detected a high temperature at the connection between
the wall plug adapter and the control box.
What to do:
Make sure the wall plug adapter is fully connected to the Mobile Connector control box.
After unplugging from the power source (wall outlet), inspect the wall plug adapter connection and the Mobile Connector
control box connection for any obstructions or moisture.
It is recommended that any debris / foreign objects be removed. Make sure any obstruction has been removed and any
moisture has been allowed to dry, then try re-inserting the wall plug adapter into the Mobile Connector and then connecting to
the power source (wall outlet).
Also make sure the wall plug adapter is not covered by anything, and that there is no heat source nearby. If the alert persists in
normal ambient temperatures (under 100°F or 38°C), and occurs during multiple charging attempts, this may indicate a
condition affecting the Mobile Connector or your vehicle. It is recommended that you schedule service at your convenience.
You can also try charging your vehicle using a Tesla Supercharger or Destination Charging location, all of which can be located
through the map on your vehicle's touchscreen display. See Maps and Navigation on page 92 for more details.
547
Owner's Manual
Troubleshooting
For more information on troubleshooting Mobile Connector status lights and charging issues, refer to the product's owner's
manual.
VCLEFT_a130 / VCREAR_a130
Critical issue detected
PULL OVER SAFELY
What this alert means:
Your vehicle has detected a potential issue with its electrical system and/or steering system, and has initiated a controlled
shutdown process intended to provide you with an opportunity to pull over at a safe location.
This alert does not mean your vehicle has lost all electrical power or steering functionality, or that the steer-by-wire system is
unavailable. This alert indicates a possible issue with one of the multiple redundant sensors and actuators designed to make
sure the steer-by-wire system always remains available while driving, or with the electrical system's ability to provide power to
the steer-by-wire system.
Your vehicle's speed and power will be limited. Your vehicle will gradually lose all drive torque, and you must pull over.
After you have pulled over and shifted into Park (P), you will have the option to drive again. Your vehicle will be limited to a very
low speed for emergency operation, such as repositioning your vehicle before it is towed.
What to do:
Pull over at a safe location, and bring your vehicle to a complete stop, at your earliest reasonable opportunity.
Once your vehicle is in Park (P) with the parking brake applied, you may choose to accept the stated conditions in the
message displayed on the touchscreen and shift out of Park (P). Your vehicle's speed and power will be very limited. This
limited drive torque will allow you to reposition your vehicle slightly at the parked location or prepare your vehicle to be towed,
but your vehicle should not be driven on public roads in this condition.
It is possible that exiting and re-entering your vehicle may clear the alert and restore functionality. If you attempt this
successfully, and no further alert messages display in the touchscreen indicating potential electrical or steering system issues,
or inability to drive, continue to your destination.
If this alert occurs again during your next drive, or occurs multiple times over subsequent drives, it is recommended that you
schedule service.
VCLEFT_a194
Electrical system power reduced
Vehicle may shut down unexpectedly
What this alert means:
The electrical system cannot maintain the voltage required to support all vehicle features.
If this alert is present while you are driving, it is possible your vehicle will shut down unexpectedly.
If this alert is present when your vehicle is in Park or when it first wakes, it is possible your vehicle may not have adequate
electrical power to start driving. A separate vehicle alert may be present to indicate that condition.
What to do:
It is recommended that you eliminate or reduce your use of any non-essential features. This can help your vehicle maintain
adequate electrical power for essential functions.
If this alert remains active, schedule service immediately. Without service, your vehicle may shut down unexpectedly or may
not restart.
Owner's Manual
548
Troubleshooting
VCLEFT_a208
Schedule service to replace low voltage battery
Software will not update until battery is replaced
What this alert means:
The low voltage battery is showing degraded performance and needs to be replaced. Until the low voltage battery is replaced,
vehicle software updates will not complete.
What to do:
It is recommended that you have the low voltage battery replaced at your earliest convenient opportunity.
You can schedule service via your Tesla Mobile App, or with an independent service provider that offers low voltage battery
replacement for your vehicle. Please note that independent service provider options may vary, based on your vehicle
configuration and your location.
If the low voltage battery does not have enough electrical power to turn on your vehicle or open the doors, follow the
instructions in Jump Starting on page 473.
For more information on the battery system, see High Voltage Battery Information on page 105.
VCLEFT_a207
Electrical system power reduced
Vehicle shutting down
What this alert means:
The low voltage battery cannot provide the electrical support necessary to drive or continue driving. Your vehicle is shutting
down to preserve energy for essential functions other than driving.
Your vehicle cannot be driven or continue driving while this condition continues.
What to do:
If this alert is present while you are driving, your vehicle needs to come to a stop immediately. It is recommended that you:
• Pull over safely immediately
• Use your Mobile App to contact Tesla Roadside Assistance immediately, or seek other roadside assistance if preferred
If you do not pull over safely within a short time, your vehicle may shut down unexpectedly. It is also possible that your vehicle
will not restart once parked.
When this alert is present, the electrical system cannot maintain the voltage required to support all vehicle features. Many
vehicle functions may no longer work.
It is possible your vehicle may lose all electrical power. If this occurs, you can still use the manual door releases to exit the
vehicle if necessary. For more information, see Opening Doors from the Interior on page 205.
This alert may be present due to various vehicle conditions. For more information and further recommended actions, check for
other active vehicle alerts.
If this alert remains present, it is recommended that you schedule service immediately. Without service, your vehicle may not
drive, may shut down unexpectedly, or may not restart.
VCLEFT_a592
Electrical system is unable to support all features
Switching off features to conserve energy
What this alert means:
549
Owner's Manual
Troubleshooting
The electrical system cannot support all vehicle features. Your vehicle is shutting down nonessential features to preserve
energy for essential functions.
If you are driving when this alert is present, it is possible your vehicle may shut down unexpectedly. It is also possible that your
vehicle will not restart once parked.
Nonessential features may be unavailable, including seat heaters, cabin climate control, and in-vehicle entertainment. This is
expected behavior intended to help your vehicle maintain adequate electrical power for essential functions, including the
ability to operate headlights, windows and doors, hazard lights, and the front trunk (frunk).
It is possible your vehicle may lose all electrical power. If this occurs, you can still use the manual door releases to exit the
vehicle if necessary. For more information, see Opening Doors from the Interior on page 205.
What to do:
This alert may be present due to various vehicle conditions. For more information and further recommended actions, check for
other active vehicle alerts.
VCLEFT_a221
Electrical system is unable to support all features
Schedule service
What this alert means:
The low voltage battery cannot provide the electrical support necessary to drive or continue driving.
It is possible your vehicle will shut down unexpectedly. It is also possible that your vehicle will not restart after the current
drive.
You may notice that some nonessential features are not available. This is expected behavior due to your vehicle preserving
energy for essential functions.
What to do:
If this alert is present while you are driving, your vehicle needs to come to a stop as soon as possible. Pull over safely at your
earliest opportunity.
It is recommended that you eliminate or reduce your use of any nonessential features. This can help your vehicle maintain
adequate electrical power for essential functions other than driving, until it can be serviced.
If this alert remains present, it is recommended that you schedule service immediately. Without service, your vehicle may not
drive, may shut down unexpectedly, or may not restart.
VCLEFT_ a365 / VCREAR_ a365
Incline too steep to park vehicle and trailer
Parking brake may not hold - Move to flatter area
What this alert means:
Your vehicle has detected an attempt to park on a slope of 10% grade or greater while Trailer Mode is active. This alert
displays whenever Trailer Mode is active and your vehicle is parked on a steep slope, even if no trailer is attached.
What to do:
• No trailer attached: Exit Trailer Mode manually via your vehicle touchscreen, so the alert no longer displays when parking on
steep slopes without a trailer.
◦ For more information, see Trailer Mode in Towing a Trailer on page 306.
• Trailer attached: It is recommended that you park your vehicle and trailer in a more level area.
◦ The parking brake may not hold both vehicle and trailer on slopes of 10% grade or greater.
For more information, see Trailer Mode and Parking with a Trailer in Towing a Trailer on page 306.
Owner's Manual
550
Troubleshooting
VCLEFT_a402
Electrical system backup power is unavailable
Vehicle will consume more energy while idle
What this alert means:
The backup power source for the electrical system, the low voltage battery, is not available or cannot provide the voltage
required to support all vehicle features.
The primary source of electrical power, the high voltage battery system, will continue to support vehicle functions, even when
your vehicle is idle. For more information on the high voltage battery, see High Voltage Battery Information on page 105.
You may notice that some nonessential features are not available. This is expected behavior due to your vehicle preserving
energy for essential functions.
You may also notice that your vehicle consumes more energy than usual when you are not driving it, or that your vehicle
displays a lower projected range than you would normally expect after charging. This is normal vehicle behavior when this alert
is present, and it will continue until the backup power source is restored.
There is a chance that an issue affecting the primary power source could cause your vehicle to shut down unexpectedly.
What to do:
It is recommended that you limit or avoid the use of any nonessential features. This can help your vehicle maintain adequate
electrical power for essential functions.
It is recommended that you schedule service at your earliest opportunity, so the backup power source for the electrical system
can be restored.
VCLEFT_a496
Vehicle is preparing to shut down
PULL OVER SAFELY
What this alert means:
The electrical system cannot provide adequate support to drive or continue driving. Your vehicle is preparing to shut down to
preserve energy for essential functions other than driving.
Your vehicle cannot be driven or continue driving while this condition continues.
What to do:
If this alert is present while you are driving, your vehicle needs to come to a stop as soon as possible. It is recommended that
you:
• Pull over safely at your earliest opportunity
• Use your Mobile App to contact Tesla Roadside Assistance immediately, or seek other roadside assistance if preferred
If you do not pull over safely within a short time, your vehicle may shut down unexpectedly. It is also possible that your vehicle
will not restart once parked.
It is possible your vehicle may lose all electrical power. If this occurs, you can still use the manual door releases to exit the
vehicle if necessary. For more information, see Opening Doors from the Interior on page 205.
This alert may be present due to various vehicle conditions. For more information and further recommended actions, check for
other active vehicle alerts.
551
Owner's Manual
Troubleshooting
VCSEC_a221
Air pressure below recommendation for tires
Check pressure and refill air as needed
What this alert means:
This alert does NOT indicate that there is a flat tire.
The tire pressure monitoring system (TPMS) has detected that the air pressure in one or more of your tires is at least 20%
lower than the recommended cold tire pressure.
See Tire Pressures on page 415 for detailed information on where to find the recommended cold pressure (RCP) for your
vehicle's tires, how to check tire pressures, and how to keep your tires properly inflated.
This alert may appear in cold weather because the air in your tires naturally contracts when it becomes cold, decreasing tire
pressures.
What to do:
Add air to maintain the recommended cold tire pressure. Although drops in tire pressure are expected in colder weather, the
recommended cold tire pressure should be maintained at all times.
The alert may clear as the vehicle is driven. This is because the tires will warm up and the tire pressure will increase. Even if the
alert clears, the tires should still be refilled with air once they have cooled.
The alert will clear once the Tire Pressure Monitoring System detects that each of your tires is inflated to the recommended
cold pressure.
• The alert and Tire Pressure indicator light may still be present immediately after you have filled your tires to the
recommended cold pressure, but both should clear once you have driven a short distance.
• You may need to drive over 15 mph (25 km/h) for at least 10 minutes for the Tire Pressure Monitoring System to measure
and report your updated tire pressures.
If you repeatedly see this alert for the same tire, have the tire inspected for a slow leak. You can visit a local tire shop or
schedule service using your Tesla Mobile App.
For more information on tire pressure and inflation, see Inspecting and Maintaining Tires on page 419.
VCSEC_a228
Air pressure in tires very low
PULL OVER SAFELY - Check for flat tire
What this alert means:
This alert indicates that one or more of the tires on your vehicle is extremely low or flat.
The tire pressure monitoring system (TPMS) has detected that the air pressure in one or more of your tires is significantly
lower than the recommended cold tire pressure.
What to do:
You should pull over carefully as soon as possible. In a safe location, check for a flat tire.
You can request Tesla roadside assistance options (mobile tire, loaner wheel, tow) if required. See Contacting Tesla Roadside
Assistance on page 145 for more information.
In a non-emergency situation, it is recommended that you visit a local tire shop for assistance or schedule service using your
Tesla Mobile App.
See Tire Pressures on page 415 for detailed information on where to find the recommended cold pressure (RCP) for your
vehicle's tires, how to check tire pressures, and how to keep your tires properly inflated.
Owner's Manual
552
Troubleshooting
The alert should clear once the Tire Pressure Monitoring System has a consistent tire pressure measurement for each of your
tires that is no longer significantly below the recommended cold pressure (RCP).
• The alert and Tire Pressure indicator light may still be present immediately after you have filled your tires to the
recommended cold pressure, but both should clear once you have driven a short distance.
• You may need to drive over 15 mph (25 km/h) for at least 10 minutes for the Tire Pressure Monitoring System to measure
and report your updated tire pressures.
For more information on tire pressure and inflation, see Inspecting and Maintaining Tires on page 419.
553
Owner's Manual
Consumer Information
About this Owner Information
Document Applicability
For the latest and greatest information that is customized to your vehicle, view the Owner’s Manual on your vehicle’s
touchscreen by touching Controls > Service > Owner's Manual. The information is specific to your vehicle depending on the
features you purchased, vehicle configuration, market region and software version. In contrast, owner information that is
provided by Tesla elsewhere is updated as necessary and may not contain information unique to your vehicle.
Information about new features is displayed on the touchscreen after a software update, and can be viewed at any time by
touching Controls > Software > Release Notes. If the content in the Owner's Manual on how to use your vehicle conflicts with
information in the Release Notes, the Release Notes take precedence.
Illustrations
The illustrations provided in this document are for demonstration purposes only. Depending on vehicle options, software
version and market region, the information displayed on the touchscreen in your vehicle may appear slightly different.
Feature Availability
Some features are available only on some vehicle configurations and/or only in specific market regions. Options or features
mentioned in the Owner's Manual does not guarantee they are available on your specific vehicle. See Feature Availability
Statement on page 150 for more information.
Errors or Inaccuracies
All specifications and descriptions are known to be accurate at time of publishing. However, because continuous improvement
is a goal at Tesla, we reserve the right to make product modifications at any time. To communicate any inaccuracies or
omissions, or to provide general feedback or suggestions regarding the quality of the Owner's Manual, send an email to
ownersmanualfeedback@tesla.com.
Location of Components
Owner information may specify the location of a component as being on the left or right side of the vehicle. As shown, left (1)
and right (2) represent the side of the vehicle when sitting inside.
Copyrights and Trademarks
© 2012-2024 Tesla, Inc. All information in this document and all vehicle software is subject to copyright and other intellectual
property rights of Tesla, Inc. and its licensors. This material may not be modified, reproduced or copied, in whole or in part,
without the prior written permission of Tesla, Inc. and its licensors. Additional information is available upon request. Tesla uses
software created by the Open Source community. HD Radio is a registered trademark of iBiquity Digital Corporation. The
following are trademarks or registered trademarks of Tesla, Inc. in the United States and other countries:
Owner's Manual
554
Consumer Information
All other trademarks contained in this document are the property of their respective owners and their use herein does not
imply sponsorship or endorsement of their products or services. The unauthorized use of any trademark displayed in this
document or on the vehicle is strictly prohibited.
555
Owner's Manual
Consumer Information
Feature Availability Statement
Your Tesla is constantly changing, with new features being added and improved upon with every software update. However,
depending on the firmware release operating on your vehicle, your vehicle may not be equipped with all features or may not
operate exactly as described in this Owner’s Manual. The features on your vehicle vary depending on market region, vehicle
configuration, options purchased, software updates, and more.
Referencing options or features mentioned in this Owner’s Manual does not guarantee they are available on your specific
vehicle. The best way to ensure you are getting the latest and greatest features is update your vehicle’s software as soon as
you receive the notification to do so. You can also set your preferences to Controls > Software > Software Preferences >
Advanced. See Software Updates on page 116 for more information. For the features available on your vehicle, always comply
with local laws and limits to ensure the safety of you, your passengers, and those around you.
Owner's Manual
556
Consumer Information
Disclaimers
Event Data Recorder (EDR)
Cybertruck is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near
crash-like situations, data such as an airbag deployment or hitting a road obstacle, to better understand how the vehicle's
systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of
time, typically 30 seconds or less. The EDR in Cybertruck is designed to record data such as:
• How various systems in your vehicle were operating;
• Whether or not the driver and passenger safety belts were buckled/fastened;
• How far (if at all) the driver was pressing the accelerator and/or brake pedal; and,
• How fast the vehicle was traveling.
The data can help provide a better understanding of the circumstances in which crashes and injuries occur.
NOTE: EDR data is recorded by your vehicle only if a non-trivial crash situation occurs; no data is recorded by the EDR under
normal driving conditions and no personal data (for example, name, gender, age, and crash location) is recorded. However,
other parties, such as law enforcement, could combine the EDR data with person identifying data they routinely acquire during
a crash investigation.
To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to
the vehicle manufacturer, other parties, such as law enforcement, that have this special equipment, can read the information if
they have access to the vehicle or the EDR. Tesla may also access the EDR remotely in some crash circumstances.
Vehicle Telematics
Cybertruck is equipped with electronic modules that monitor and record data from various vehicle systems, including the
motor, Autopilot components, Battery, braking and electrical systems. The electronic modules record information about
various driving and vehicle conditions, including braking, acceleration, trip and other related information regarding your
- Advanced VCI Box, Industry-leading J2534 Pass-Thru...
- High-Speed OEM-Level Diagnostics & Programming: Unlock true...
- Coverage for 17 Car Brands & Ultra Reliability: Works...
- User-Friendly RLink Platform & Expert Support: TOPDON’s...
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J...
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: 2024.26.100_082024.pdf
Replacement Service Bulletin Number:
MFR Communication Date: 2024-08-31
MFR Internal Campaign ID/Software Version: 2024.26.100
Communication Type: Over The Air
NHTSA Components: UNKNOWN OR OTHER
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used escaner automotriz device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way, and we’ll provide a solution within 24 hours. THINKSCAN 689BT Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- [Good News] THINKSCAN 689BT is the most competitive automotive scan tool to date, offering wireless updates with no subscription fees(valued 500Buc.ks) . With all the features of THINKTOOL PD8,PRO, built on Android 10 platform with 4-core CPU, 4GB RAM
and 64GB ROM, serving up to 5X faster than older MAX/MINI/PLUS vehicle scanners escaner automotriz, no more slow and delayed feedbacks, it's time to update your garage tool. - [Big Money Saver] Premium THINKSCAN 689BT Wireless Diagnostic Scanner Escaner Automotriz, save up to 400USD per year, includes all useful features: Full bi-directional controls, ECU coding, 34+ services, OEM all system diagnostics, Worldwide vehicles coverage, CAN FD & DoIP, FCA AutoAuth（The 689BT only provides a login and purchase portal, and users are required to register for an FCA account and pay a membership fee in order to perform the relevant automotive diagnostics)
- [3000+ Active Tests]Active testing is one of the most useful features in automotive maintenance and greatly improves mechanic efficiency. THINKCAR 689BT bidirectional scanner can send action commends to vehicle sub-systems or components for active test without using vehicle controls. It can perform various tests such as: EVAP Test, Fuel Trim Reset, Injector Buzz Test, Window/ Mirror/ Door Lock Test, Pump and Value Tests, etc. Get functions from "Diagnose>Car Model>System>Active Test".
- [Hot Advanced Features] 689BT bidirectional tool scanner for car newly adds ECU Coding, Power Balance, Flash Hidden Functions, Reset Adaptive Data, Match Replaced Components, Customize OE-Settings. Such as: 1. changing the color of interior lights 2. switching on/off the auto hold, 3. customizing dash kits 4. activating the auto side mirror folding function 5. disables auto start-stop. Note: Coding functions vary by model&year.
- 【15+ Advanced Reset & Calibration Functions】The Thinkdiag scanner provides 15+ professional maintenance functions, including:✔ Oil Reset | ✔ ABS Bleeding | ✔ Injector Coding | ✔ SAS Reset✔ TPMS Reset | ✔ BMS Reset | ✔ Transmission Adaptation | ✔ AFS Reset | ✔ Sunroof Calibration | ✔ Brake Reset | ✔ Suspension Relearn | ✔ Electronic Throttle Relearn | ✔ Seat Calibration | + More reset/relearn/calibrate/adaptive functions under automotive full systems diagnostic menu. Ideal professional OBDII scanner for mechanics and DIY enthusiasts, Thinkdiag delivers professional OE-level diagnostics with adaptive relearn capabilities for precise vehicle servicing.
- 【Full-System Diagnostics OBD2 Scanner Bluetooth】 Thinkdiag OBD2 Scanner supports all Systems diagnostic function, it can read/clear DTCs, read live data, read control module information, actuation tests and maintenance functions for ECM, BCM, SRS, TCM, BMS, TPMS, SAS, A/C system etc... It works with most car models after 1996, cover more than 120+ car brands. All car make and reset software come with 1 year update without any charge, much valuable and powerful than 1000 dollars level scanners in the market.
- 【Potential Feature Activation】 Thinkdiag diagnose obd2 scanner Bluetooth allows you to match the replaced components with ECU, activate potential functions for BMW, for GM, for Benz etc. Adjust some annoying features, adapt vehicle's settings to improve performance. No matter you are private owner or professional technician, Thinkdiag is a powerful and handy scanner in your repair tool list. Potential features are not suitable for every car models, please check with us before purchase. This superior function required newest Android OS device, it performs better on Android cell phone.
- 【Bidirectional Test/Active Test】 Thinkdiag car code reader actuates solenoids and actuators for active testing, send commands to systems/components to test their real-time working status, without using manual vehicle controls which saves much diagnostic time and effort to identify malfunction causes. You can check windows, doors, mirrors, sunroof, fans, fuel pump and other parts working status by actuation test function, thinkdiag supports 10000+ active tests. When you process Automotive full system diagnostic, you can do active test on every supported module.
- 【Intelligent Diagnostic Tool with Auto-VIN】Thinkdiag Bluetooth OBD2 scanner makes your smart phone device become a professional vehicle diagnostic tool, it compatible with Android and iOS system. Auto-VIN function supports the Thinkdiag identifies the most car models automatically, if autovin failed, you can choose car info manually. Full system Vehicle health report will be automatically created after diagnosis, report can be shared. Live Data Stream combined 4-in-1 Graphing+Data Record better for monitoring vehicle performance and analyze the abnormal parameter.
- 【Powerful Bidirectional Control -- Active Test】Good News! The THINKSCAN 662 obd2 scanner has bidirectional control function,which is the most popular feature among mechanics.This function is mainly used to test whether the executing components in the electronic control system can work normally,By requesting information from the vehicle's ECU or sending commands to the ECU module to execute commands and identify maintenance status,quickly locate the cause of the fault.Such as ABS,Fuel Injectors,Adjusting Throttle,Coolant Fans,Radiator Fans,Coolant Pumps,EV.AP Test, Fuel Trim Reset,Injector Buzz Test,Pump/ Value Test,etc. Effectively shorten diagnosis time and reduce diagnosis costs.
- 【Unlock Pro-Level Diagnostics With Half Costs】 THINKSCAN 662 obd2 scanner diagnostic tool Delivers Premium Scanning Power for Half the Price! The OBD2 scanner can handle common issues with ECM,TCM,ABS,SRS. It can easily read and clear fault codes, analyze data streams, and ensure quick identification of problems. THINKSCAN 662 bidirectional scan tool has 12 practical reset functions, including Airbag Reset,ABS Bleeding,BMS,Brake Reset, D.P.F,Throttle Adaptation,Injector Coding,OIL Reset,steering angle Reset,Gearbox,TPMS,and more. The car scanner diagnostic tool very suitable for DIY enthusiasts, car repair technicians, and small and medium-sized repair shops.
- 【Multi Functional Intelligent Car Scanner Diagnostic Tool】 Automatic VIN + Real-time Data + DTC Lookup + Historical Diagnostic Records: This OBD2 scanner features auto serch technology, allowing for car recognition without the need for manual input. The real-time data of the car ECU is read and displayed in the form of text or a 4-in-1 merged waveform chart. You can save, share, print or send the entire inspection report via email for analysis. Historical diagnostic reports help you quickly identify vehicle issues and understand the condition of the vehicle. The built-in 'feedback' module provides customized repair Operation recommendations from our certified professionals.
- 【Upgraded Hardware + Ergonomically Engineered】 THINKSCAN 662 OBD2 scanner has a friendly combination of touch screen and physical buttons with an ergonomic appearance for comfortable use.Experience 2x faster scans and 50% longer lifespan vs standard models.This scanner para autos boast a 4-core 1.8GHz CPU,6.2-inch HD touch screen,2GB RAM + 32GB ROM storage capacity,a long-lasting 4150mAh battery,Android 8 ensures lightning-fast bootup and processing.The scanner is robust with rubberized protection that you can store and use in the trunk or garage.Whether you are engaged in Home car maintenance or road rescue car repair,this car scanner can help you perfectly solve car problems.
- 【Effortless Setup & Scanning - Intuitive for All Skill Levels】No More Complicated Scanners! The User Interface is as User-Friendly as THINKCAR 689BT! Truly Plug-and-Play,The downward sliding setup shortcut portal and drawer function shortcut portal make you use this scan tool as easy as using your own cell phone.The car scanner supports setup screenshot,screen recording,volume adjustment,this scan tool includes product e-manuals,instructional videos,and fault code libraries,users can check the usage guide,perfect for DIY car owners,Maintenance technician.If your father,husband,brother,boyfriend enjoys car repairs,THINKSCAN 662 is a great gift choice, and it has amazing family value.
Last update on 2026-06-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.