NHTSA ID Number: 10183809
Manufacturer Communication Number: MSDS Sheets
TSB/Document Date: 2020-12-07
Summary
Material Safety Data Sheet
LB TPQ if not volatile.
Sec.304:
EPA SARA Title III Section 304: CERCLA Reportable + Sec.302 with Reportable Quantity. **
indicates statutory RQ.
Sec.313:
EPA SARA Title III Section 313 Toxic Release Inventory. Note: -Cat indicates a member of a
chemical category.
Sec.110:
EPA SARA 110 Superfund Site Priority Contaminant List
TSCA (Toxic Substances Control
Act) Lists:
Inventory:
Chemical Listed in the TSCA Inventory.
5A(2):
Chemical Subject to Significant New Rules (SNURS)
6A:
Commercial Chemical Control Rules
8A:
Toxic Substances Subject To Information Rules on Production
8A CAIR:
Comprehensive Assessment Information Rules - (CAIR)
8A PAIR:
Preliminary Assessment Information Rules - (PAIR)
8C:
Records of Allegations of Significant Adverse Reactions
8D:
Health and Safety Data Reporting Rules
Licensed to Excelda Manufacturing, Inc.
ANSI Z400.1 format
MATERIAL SAFETY DATA SHEET
Cooling System Flush
8D TERM:
Health and Safety Data Reporting Rule Terminations
12(b):
Notice of Export
Page: 6
Printed: 10/28/2013
Revision: 10/17/2013
Other Important Lists:
CWA NPDES:
EPA Clean Water Act NPDES Permit Chemical
CAA HAP:
EPA Clean Air Act Hazardous Air Pollutant
CAA ODC:
EPA Clean Air Act Ozone Depleting Chemical (1=CFC, 2=HCFC)
CA PROP 65:
California Proposition 65
International
Regulatory Lists:
EPA Hazard Categories:
This material meets the EPA 'Hazard Categories' defined for SARA Title III Sections 311/312 as indicated:
[X] Yes [ ] No Acute (immediate) Health Hazard
[ ] Yes [X] No Chronic (delayed) Health Hazard
[ ] Yes [X] No Fire Hazard
[ ] Yes [X] No Sudden Release of Pressure Hazard
[ ] Yes [X] No Reactive Hazard
Regulatory Information
TSCA: All ingredients in this product are listed on the TSCA Inventory or are otherwise exempt.
CA Prop 65: Proposition 65 are NOT required for this product based on the results of a risk assessment.
Regulatory Information Statement
The information contained herein is based on data considered accurate. However, no warranty is expressed or
implied regarding the accuracy of this data or the results to be obtained from the use thereof. Vendor assumes no
responsibility for injury to vendee or third person proximately caused by the material if reasonable safety
procedures are not adhered to as stipulated in the data sheet. Additionally, vendor assumes no responsibility for
injury to vendee or third persons proximately caused by abnormal use of the material even if reasonable safety
procedures are followed. Furthermore, vendee assumes all risk in use of the material.
16. Other Information
Company Policy or Disclaimer
THIS INFORMATION IS FURNISHED WITHOUT WARRANTY, EXPRESSED OR IMPLIED, EXCEPT
THAT IS ACCURATE TO THE BEST KNOWLEDGE OF HINO MOTOR SALES USA. THE DATA ON
THIS SHEET RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED HEREIN. HINO MOTOR
SALES USA. ASSUMES NO LEGAL RESPONSIBILITY FOR USE OR RELIANCE UPON THIS DATA.
Licensed to Excelda Manufacturing, Inc.
ANSI Z400.1 format
Page: 1
MATERIAL SAFETY DATA SHEET
Cooling System Iron Cleaner
Flammability
Health
1
0
Instability
Printed: 10/28/2013
Revision: 10/18/2013
0
Date Created: 10/18/2013
Special Hazard
1. Product and Company Identification
Product Code:
805-114658
Product Name:
Cooling System Iron Cleaner
Manufacturer/Supplier/Distributor Information
Company Name:
Hino Motor Sales USA, Inc.
41180 Bridge St.
Novi, MI 48375
Phone Number:
(248)699-9300
Fax Number:
(248)699-9310
Part Number:
HN001234026
Revision Date:
10/18/2013
2. Composition/Information on Ingredients
Chemical Name
CAS #
1.
7414-83-7 7.0 -13.0 %
Disodium dihydrogen
(1-hydroxyethylidene)bisphosphonate
Concentration
OSHA PEL
ACGIH TLV
Other Limits
No data.
No data.
No data.
Chemical Name
RTECS #
OSHA STEL
OSHA CEIL
ACGIH STEL
ACGIH CEIL
1.
SZ8562240
No data.
No data.
No data.
No data.
Disodium dihydrogen
(1-hydroxyethylidene)bisphosphonate
3. Hazards Identification
Emergency Overview
May cause slight irritation to the skin. May cause moderate irritation to the eyes. Mists/aerosols may cause
irritation to upper respiratory tract.
Route(s) of Entry:
Inhalation? Yes
Skin? Yes
Eyes? Yes
Ingestion? Yes
Potential Health Effects (Acute and Chronic)
Skin: Primary route of exposure; May cause slight irritation to the skin.
Eyes: May cause moderate irritation to the eyes.
Inhalation: Mists/aerosols may cause irritation to upper respiratory tract.
Ingestion: May cause gastrointestinal irritation.
Signs and Symptoms Of Exposure
Eyes: Redness, tearing, irritation or other signs of discomfort.
Skin: Redness, itching, irritation or other signs of discomfort.
Inhalation: Irritation or other discomfort.
Ingestion: Irritation or other discomfort.
Medical Conditions Generally Aggravated By Exposure
Not known.
OSHA Hazard Classes:
HEALTH HAZARDS : Irritant
PHYSICAL HAZARDS : No Physical Hazards
TARGET ORGANS & EFFECTS: Eyes, Skin
Licensed to Excelda Manufacturing, Inc.
ANSI Z400.1 format
MATERIAL SAFETY DATA SHEET
Cooling System Iron Cleaner
Page: 2
Printed: 10/28/2013
Revision: 10/18/2013
4. First Aid Measures
Emergency and First Aid Procedures
In Case of Inhalation
If nasal, throat or lung irritation develops - remove to fresh air and get medical attention.
In Case of Skin Contact
Wash thoroughly with soap and water. Remove contaminated clothing. Get medical attention if irritation
develops or persists.
In Case of Eye Contact
Remove contact lenses. Hold eyelids apart. Immediately flush eyes with plenty of low-pressure water for at least
15 minutes. Get immediate medical attention.
In Case of Ingestion
Do not feed anything by mouth to an unconscious or convulsive victim. Do not induce vomiting. Immediately
contact physician. Dilute contents of stomach using 2-8 fluid ounces (60-240 mL) of milk or water.
Note to Physician
No special instructions
5. Fire Fighting Measures
Flash Pt:
> 200.00 F (93.3 C)
Explosive Limits:
LEL: No data.
Autoignition Pt:
No data available.
Method Used: Pensky-Marten Closed Cup
UEL: No data.
Fire Fighting Instructions
As with all fires involving chemicals, responders should wear full bunker gear including a self-contained
breathing apparatus. Cool containers to keep them from bursting, and remove from high heat areas if possible.
Flammable Properties and Hazards
No unusual hazards, fight fire as appropriate for surrounding chemicals and conditions.
Hazardous Combustion Products
Oxides of carbon, nitrogen and phosphorus; hydrogen chloride
Extinguishing Media
Foam, carbon dioxide, dry chemical.
Unsuitable Extinguishing Media
No data available.
6. Accidental Release Measures
Steps To Be Taken In Case Material Is Released Or Spilled
Contain and absorb on absorbent material. Place in waste disposal container. Flush area with water. Wet area
may be slippery. Spread sand/grit.
Protective Precautions, Protective Equipment and Emergency Procedures
Ventilate area. Use specified protective equipment.
7. Handling and Storage
Precautions To Be Taken in Handling
Avoid contact with eyes, skin and clothing. Do not inhale mists, vapors or fumes. Do not ingest. Wash after
use.
Precautions To Be Taken in Storing
Store below 100F ( 38C). Keep containers closed when not in use. Protect from freezing. If frozen, thaw
completely and mix thoroughly prior to use.
Licensed to Excelda Manufacturing, Inc.
ANSI Z400.1 format
MATERIAL SAFETY DATA SHEET
Cooling System Iron Cleaner
Page: 3
Printed: 10/28/2013
Revision: 10/18/2013
8. Exposure Controls/Personal Protection
Respiratory Equipment (Specify Type)
Air-purifying respirator if appropriate, include any of the following particulate respirators: N95, N99, N100, R95,
R99, R100, P95, P99 or P100.
Eye Protection
Splash proof chemical goggles.
Protective Gloves
Rubber, viton or neoprene gloves - Wash off after each use. Replace as necessary.
Other Protective Clothing
No data available.
Engineering Controls (Ventilation etc.)
Provide adequate ventilation. General ventilation should be adequate, however if application results in the
generation of spray, mists, fumes or vapors, or if application is performed in a poorly ventilated area such as a
confined space, additional mechanical ventilation may be required.
Work/Hygienic/Maintenance Practices
Following good manufacturing practices including washing following the handling of this product and before
eating, drinking or smoking.
9. Physical and Chemical Properties
Physical States:
[ ] Gas
Freezing Point:
18.00 F (-7.8 C)
Boiling Point:
No data.
Autoignition Pt:
No data.
Flash Pt:
> 200.00 F (93.3 C)
Specific Gravity (Water = 1):
1.105
Vapor Pressure (vs. Air or mm Hg):
~ 18 MMHG
Vapor Density (vs. Air = 1):
< 1.00 - air=1
Evaporation Rate:
< 1.00 (Ether=1)
Solubility in Water:
100 %
Percent Volatile:
No data.
VOC / Volume:
0.0000 WT%
Viscosity:
13 CPS
pH:
~ 6.00
[ X ] Liquid
[ ] Solid
Method Used: Pensky-Marten Closed Cup
at 70.0 F (21.1 C)
at 70.0 F (21.1 C)
Appearance and Odor
Colorless to amber liquid with a mild odor
10. Stability and Reactivity
Stability:
Unstable [
]
Stable [ X ]
Reactivity
Contact with water reactive compounds may cause fire or explosion.
Conditions To Avoid - Instability
Stable under normal storage conditions.
Incompatibility - Materials To Avoid
May react with strong oxidizers.
Hazardous Decomposition Or Byproducts
Oxides of carbon, nitrogen and phosphorus; hydrogen chloride.
Licensed to Excelda Manufacturing, Inc.
ANSI Z400.1 format
Page: 4
MATERIAL SAFETY DATA SHEET
Cooling System Iron Cleaner
Hazardous Polymerization:
Will occur [
]
Printed: 10/28/2013
Revision: 10/18/2013
Will not occur [ X ]
Conditions To Avoid - Hazardous Polymerization
None known.
11. Toxicological Information
Toxicological Information
No data available.
Chronic Toxicological Effects
No data available.
Carcinogenicity/Other Information
No data available.
Carcinogenicity:
NTP? No
IARC Monographs? No
OSHA Regulated? No
12. Ecological Information
General Ecological Information
No data available.
13. Disposal Considerations
Waste Disposal Method
Dispose in accordance with all Federal, State/Provincial and local laws and regulations.
14. Transport Information
LAND TRANSPORT (US DOT)
DOT Proper Shipping Name
Not Regulated
Additional Transport Information
No data available.
15. Regulatory Information
US EPA SARA Title III
Chemical Name
CAS #
Sec.304 RQ
Sec.313 (TRI)
Sec.110
1.
7414-83-7 No
No
No
No
Chemical Name
CAS #
EPA CWA NPDES
EPA TSCA
CA PROP 65
1.
7414-83-7 No
No
Inventory
No
Disodium dihydrogen
(1-hydroxyethylidene)bisphosphonate
Sec.302 (EHS)
US EPA CAA, CWA, TSCA
Disodium dihydrogen
(1-hydroxyethylidene)bisphosphonate
EPA CAA
SARA (Superfund Amendments and
Reauthorization Act of 1986) Lists:
Sec.302:
EPA SARA Title III Section 302 Extremely Hazardous Chemical with TPQ. * indicates 10000
LB TPQ if not volatile.
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: MSDS Sheets
Replacement Service Bulletin Number:
MFR Communication Date: 2012-08-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase
- OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.