5A(2):

Chemical Subject to Significant New Rules (SNURS)

6A:

Commercial Chemical Control Rules

8A:

Toxic Substances Subject To Information Rules on Production

8A CAIR:

Comprehensive Assessment Information Rules - (CAIR)

8A PAIR:

Preliminary Assessment Information Rules - (PAIR)

8C:

Records of Allegations of Significant Adverse Reactions

8D:

Health and Safety Data Reporting Rules

8D TERM:

Health and Safety Data Reporting Rule Terminations

12(b):

Notice of Export

Other Important Lists:
CWA NPDES:

EPA Clean Water Act NPDES Permit Chemical

CAA HAP:

EPA Clean Air Act Hazardous Air Pollutant

CAA ODC:

EPA Clean Air Act Ozone Depleting Chemical (1=CFC, 2=HCFC)

CA PROP 65:

California Proposition 65

International Regulatory Lists:
EPA Hazard Categories:

This material meets the EPA 'Hazard Categories' defined for SARA Title III Sections 311/312 as indicated:
[X] Yes [ ] No Acute (immediate) Health Hazard
[X] Yes [ ] No Chronic (delayed) Health Hazard
[X] Yes [ ] No Fire Hazard
[X] Yes [ ] No Sudden Release of Pressure Hazard
[ ] Yes [X] No Reactive Hazard
Regulatory Information

This material contains one or more chemical(s) known to the State of California to cause cancer, birth defects or
other reproductive harm.
Regulatory Information Statement

The information contained herein is based on data considered accurate. However, no warranty is expressed or
implied regarding the accuracy of this data or the results to be obtained from the use thereof. Vendor assumes no
responsibility for injury to vendee or third person proximately caused by the material if reasonable safety
procedures are not adhered to as stipulated in the data sheet. Additionally, vendor assumes no responsibility for
injury to vendee or third persons proximately caused by abnormal use of the material even if reasonable safety
procedures are followed. Furthermore, vendee assumes all risk in use of the material.

16. Other Information
Company Policy or Disclaimer

THIS INFORMATION IS FURNISHED WITHOUT WARRANTY, EXPRESSED OR IMPLIED, EXCEPT
THAT IS ACCURATE TO THE BEST KNOWLEDGE OF HINO MOTOR SALES USA. THE DATA ON
THIS SHEET RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED HEREIN. HINO MOTOR
SALES USA. ASSUMES NO LEGAL RESPONSIBILITY FOR USE OR RELIANCE UPON THIS DATA.

Licensed to Excelda Manufacturing, Inc.

ANSI Z400.1 format

Page: 1

MATERIAL SAFETY DATA SHEET
Cooling System Flush
Flammability

Health

1

1

Instability

Printed: 10/28/2013
Revision: 10/17/2013

0

Date Created: 10/17/2013

Special Hazard

1. Product and Company Identification
Product Code:

805-116473

Product Name:

Cooling System Flush

Manufacturer/Supplier/Distributor Information
Company Name:

Hino Motor Sales USA, Inc.
41180 Bridge St.
Novi, MI 48375

Phone Number:

(248)699-9300

Fax Number:

(248)699-9310

Part Number:

HN001234025

Revision Date:

10/17/2013

2. Composition/Information on Ingredients
Chemical Name
1.

CAS #

Ethylenediamine tetraacetic acid, tetrasodium
salt

Concentration

64-02-8 5.0 -10.0 %

Chemical Name

RTECS #

1.

AH5075000 No data.

Ethylenediamine tetraacetic acid, tetrasodium
salt

OSHA STEL

OSHA PEL

ACGIH TLV

Other Limits

No data.

No data.

No data.

OSHA CEIL

ACGIH STEL

ACGIH CEIL

No data.

No data.

No data.

3. Hazards Identification
Emergency Overview

Causes eye irritation. May cause skin and respiratory tract irritation. May be harmful if swallowed.
Route(s) of Entry:

Inhalation? Yes

Skin? Yes

Eyes? Yes

Ingestion? Yes

Potential Health Effects (Acute and Chronic)

Eye contact: Can cause severe eye irritation. Can injure eye tissue.
Skin contact: Can cause skin irritation.
Ingestion: Swallowing small amounts of this material during normal handling is not likely to cause harmful
effects. Swallowing large amounts may be harmful.
Inhalation: It is possible to breathe this material under certain conditions of handling and use (for example,
during heating, spraying, or stirring). Breathing small amounts of this material during normal handling is not
likely to cause harmful effects. Breathing large amounts may be harmful. Symptoms are not expected at air
concentrations below the recommended exposure limits.
Recommended Exposure Limits

Contains no substances with occupational exposure limit values.
Signs and Symptoms Of Exposure

Signs and symptoms of exposure to this material through breathing, swallowing, and/or passage of the material
through the skin may include:, stomach or intestinal upset (nausea, vomiting, diarrhea), irritation (nose, throat,
airways), Cough, Difficulty in breathing, lung edema (fluid buildup in the lung tissue), lung damage, damage to
the mouth, throat, and/or airways, shock
Eye contact: Stinging, tearing, redness, and swelling of eyes.
Skin contact: Redness and burning of skin, and other skin damage.
Licensed to Excelda Manufacturing, Inc.

ANSI Z400.1 format

MATERIAL SAFETY DATA SHEET
Cooling System Flush

Page: 2
Printed: 10/28/2013
Revision: 10/17/2013

Medical Conditions Generally Aggravated By Exposure

Preexisting disorders of the following organs (or organ systems) may be aggravated by exposure to this material:
Skin, lung (for example, asthma-like conditions)
OSHA Hazard Classes:

HEALTH HAZARDS : Irritant
PHYSICAL HAZARDS : No Physical Hazards
TARGET ORGANS & EFFECTS: Eyes, Skin, Respiratory System

4. First Aid Measures
Emergency and First Aid Procedures
In Case of Inhalation

If symptoms develop, move individual away from exposure and into fresh air. If symptoms persist, seek medical
attention. If breathing is difficult, administer oxygen. Keep person warm and quiet; seek immediate medical
attention.
In Case of Skin Contact

Remove contaminated clothing. Flush exposed area with large amounts of water. If skin is damaged, seek
immediate medical attention. If skin is not damaged and symptoms persist, seek medical attention. Launder
clothing before reuse.
In Case of Eye Contact

If symptoms develop, immediately move individual away from exposure and into fresh air.
Flush eyes gently with water for at least 15 minutes while holding eyelids apart; seek immediate medical
attention.
In Case of Ingestion

Seek medical attention. If individual is drowsy or unconscious, do not give anything by mouth; place individual
on the left side with the head down. Contact a physician, medical facility, or poison control center for advice
about whether to induce vomiting. If possible, do not leave individual unattended.

5. Fire Fighting Measures
Flash Pt:

> 250.00 F (121.1 C)

Explosive Limits:

LEL: No data.

Autoignition Pt:

No data available.

UEL: No data.

Fire Fighting Instructions

Precautions for fire-fighting
Wear full firefighting turn-out gear (full Bunker gear), and respiratory protection (SCBA). DO NOT direct a
solid stream of water or foam into hot, burning pools of liquid since this may cause frothing and increase fire
intensity. Frothing can be violent and possibly endanger any firefighter standing too close to the burning liquid.
Use water spray to cool fire exposed containers and structures until fire is out if it can be done with minimal risk.
Avoid spreading burning material with water used for cooling purposes.
Flammable Properties and Hazards

No unusual hazards.
Hazardous Combustion Products

Ammonia, toxic fumes, nitrogen oxides (NOx), carbon dioxide and carbon monoxide
Extinguishing Media

Dry chemical, Carbon dioxide (CO2), Water spray
Unsuitable Extinguishing Media

No data available.

Licensed to Excelda Manufacturing, Inc.

ANSI Z400.1 format

MATERIAL SAFETY DATA SHEET
Cooling System Flush

Page: 3
Printed: 10/28/2013
Revision: 10/17/2013

6. Accidental Release Measures
Steps To Be Taken In Case Material Is Released Or Spilled

Keep in suitable, closed containers for disposal. Soak up with inert absorbent material (e.g. sand, silica gel, acid
binder, universal binder, sawdust).
Protective Precautions, Protective Equipment and Emergency Procedures

Persons not wearing protective equipment should be excluded from area of spill until clean-up has been
completed.
Environmental Precautions

Prevent spreading over a wide area (e.g. by containment or oil barriers). Do not let product enter drains. Do not
flush into surface water or sanitary sewer system.
Comply with all applicable federal, state, and local regulations.

7. Handling and Storage
Precautions To Be Taken in Handling

Containers of this material may be hazardous when emptied. Since emptied containers retain product residues
(vapor, liquid, and/or solid), all hazard precautions given in the data sheet must be observed.
Precautions To Be Taken in Storing

Store in a cool, dry, ventilated area.

8. Exposure Controls/Personal Protection
Respiratory Equipment (Specify Type)

A NIOSH-approved air-purifying respirator with an appropriate cartridge and/or filter may be
permissible under certain circumstances where airborne concentrations are expected to exceed exposure limits (if
applicable) or if overexposure has otherwise been determined. Protection provided by air- purifying respirators is
limited. Use a positive pressure, air-supplied respirator if there is any potential for uncontrolled release, exposure
levels are not known or any other circumstances where an air- purifying respirator may not provide adequate
protection.
Eye Protection

Wear chemical splash goggles when there is the potential for exposure of the eyes to liquid, vapor or mist.
Maintain eye wash station near work area.
Protective Gloves

Wear resistant gloves (consult your safety equipment supplier). Discard gloves that show tears, pinholes, or signs
of wear.
Other Protective Clothing

Wear normal work clothing including long pants, long-sleeved shirts and foot covering to prevent direct contact
of the product with the skin. Launder clothing before reuse. If skin irritation develops, contact your facility
health and safety professional or your local safety equipment supplier to determine the proper personal protective
equipment for your use.
Engineering Controls (Ventilation etc.)

These recommendations provide general guidance for handling this product. Personal protective equipment
should be selected for individual applications and should consider factors which affect exposure potential, such
as handling practices, chemical concentrations and ventilation. It is ultimately the responsibility of the employer
to follow regulatory guidelines established by local authorities.
Provide sufficient mechanical (general and/or local exhaust) ventilation to maintain exposure below exposure
guidelines (if applicable) or below levels that cause known, suspected or apparent adverse effects.
Work/Hygienic/Maintenance Practices

No data available.

Licensed to Excelda Manufacturing, Inc.

ANSI Z400.1 format

MATERIAL SAFETY DATA SHEET
Cooling System Flush

Page: 4
Printed: 10/28/2013
Revision: 10/17/2013

9. Physical and Chemical Properties
Physical States:

[ ] Gas

Melting Point:

No data.

Boiling Point:

212.00 F (100.0 C)

Autoignition Pt:

No data.

Flash Pt:

> 250.00 F (121.1 C)

Specific Gravity (Water = 1):

1.045

Vapor Pressure (vs. Air or mm Hg):

23.333 hPa at 68.0 F (20.0 C)

Vapor Density (vs. Air = 1):

No data.

Evaporation Rate:

No data.

Solubility in Water:

No data.

Percent Volatile:

No data.

pH:

~ 9.0

[ X ] Liquid

[ ] Solid

at 20.0 C (68.0 F)

Appearance and Odor

No data available.

10. Stability and Reactivity
Stability:

Unstable [

]

Stable [ X ]

Conditions To Avoid - Instability

HIgh heat.
Incompatibility - Materials To Avoid

Oxidizing agents, Strong bases, strong mineral acids
Hazardous Decomposition Or Byproducts

Ammonia, nitrogen oxides (NOx), toxic fumes, carbon dioxide and carbon monoxide
Hazardous Polymerization:

Will occur [

]

Will not occur [ X ]

Conditions To Avoid - Hazardous Polymerization

None known.

11. Toxicological Information
Toxicological Information

Acute oral toxicity ETHYLENEDIAMINETETRAACETIC ACID, TETRASODIUM SALT: LD 50 Rat:
630-1,260 mg/kg
Acute inhalation toxicity ETHYLENEDIAMINETETRAACETIC ACID, TETRASODIUM SALT: no data
available
Acute dermal toxicity ETHYLENEDIAMINETETRAACETIC ACID, TETRASODIUM SALT: LD 50 Rabbit:
> 5,000 mg/kg
Chronic Toxicological Effects

No data available.
Carcinogenicity/Other Information

This material is not listed as a carcinogen by the International Agency for Research on Cancer (IARC), the
National Toxicology Program (NTP), or the Occupational Safety and Health Administration
(OSHA).
Reproductive hazard
Ethylenediamine tetraacetic acid (EDTA) and its sodium salts have been reported to cause birth defects in
laboratory animals. Birth defects occurred only at exposure levels that harmed the pregnant animal. These effects
are likely associated with zinc deficiency due to the removal of zinc from the body by EDTA.
Licensed to Excelda Manufacturing, Inc.

ANSI Z400.1 format

Page: 5

MATERIAL SAFETY DATA SHEET
Cooling System Flush
Carcinogenicity:

NTP? No

IARC Monographs? No

Printed: 10/28/2013
Revision: 10/17/2013

OSHA Regulated? No

12. Ecological Information
General Ecological Information

Toxicity to fish ETHYLENEDIAMINETETRAACETIC ACID, TETRASODIUM SALT: 96 h LC 50 Bluegill
(Lepomis macrochirus): 472.00 -500.00 mg/l Method: Static; Mortality
Toxicity to daphnia and other aquatic invertebrates ETHYLENEDIAMINETETRAACETIC ACID,
TETRASODIUM SALT: 24 h EC 50 Water flea (Daphnia magna): 570.00 -640.00 mg/l Mortality

13. Disposal Considerations
Waste Disposal Method

Dispose in accordance with all Federal, State/Provincial and local laws and regulations.

14. Transport Information
LAND TRANSPORT (US DOT)
DOT Proper Shipping Name

Not regulated

Additional Transport Information

No data available.

15. Regulatory Information
US EPA SARA Title III
Chemical Name
1.

Ethylenediamine tetraacetic acid, tetrasodium
salt

CAS #

Sec.302 (EHS)

64-02-8 No

Sec.304 RQ

Sec.313 (TRI)

Sec.110

No

No

No

EPA CWA NPDES

EPA TSCA

CA PROP 65

No

Inventory

No

US EPA CAA, CWA, TSCA
Chemical Name
1.

Ethylenediamine tetraacetic acid, tetrasodium
salt

CAS #

EPA CAA

64-02-8 No

SARA (Superfund Amendments and
Reauthorization Act of 1986) Lists:
Sec.302:

EPA SARA Title III Section 302 Extremely Hazardous Chemical with TPQ. * indicates 10000