soaked clothing and take a shower. Contaminated leather goods should be removed promptly and discarded.
Engineering Controls (Ventilation etc.)

If general ventilation is not sufficient, provide exhaust ventilation or other engineering controls to keep the
airborne concentrations of vapor and/or mists below the pertinent exposure limits. All electrical equipment
should comply with the NFPA NEC standards.
Work/Hygienic/Maintenance Practices

Before eating, drinking, smoking, use of toilet facilities, or leaving work, wash hands with plenty of mild soap
and water.
Ensure that an emergency eye wash station and a safety shower are near work stations. Do NOT use gasoline,
kerosene, other solvents, or harsh abrasive skin cleaners.

9. Physical and Chemical Properties
Physical States:

[ X ] Gas

Melting Point:

No data.

Boiling Point:

No data.

Autoignition Pt:

No data.

Flash Pt:

< -150.00 F (-101.1 C)

Specific Gravity (Water = 1):

0.71 - 0.77

Vapor Pressure (vs. Air or mm Hg):

No data.

Vapor Density (vs. Air = 1):

No data.

Evaporation Rate:

No data.

Solubility in Water:

Slight

Percent Volatile:

> 80.0 % by weight.

VOC / Volume:

58.8000 WT%

Viscosity:

< 1 CST

[ X ] Liquid

[ ] Solid

Method Used: Estimate

at 25.0 C (77.0 F)

at 25.0 C (77.0 F)

at 25.0 C (77.0 F)

Appearance and Odor

Clear colorless liquid with gaseous propellent with hydrocarbon odor.
Note: Except for VOC percentage, physical properties relate only to liquid constituent of the product.

10. Stability and Reactivity
Stability:

Unstable [

]

Stable [ X ]

Conditions To Avoid - Instability

Keep away from extreme heat, strong acids, and strong oxidizing conditions. Acetone may form explosive
mixtures with chromic anhydride, chromyl alcohol, hexachloromelamine, hydrogen peroxide, permonosulfuric
acid, potassium tertbutoxide, and thioglycol.
Incompatibility - Materials To Avoid

Strong acids, alkalies, and oxidizers such as liquid chlorine, hydrogen peroxide and oxygen. n-Heptane will
dissolve some plastics.
Hazardous Decomposition Or Byproducts

Oxides of carbon and other asphyxiants.

Licensed to Excelda Manufacturing, Inc.

ANSI Z400.1 format

MATERIAL SAFETY DATA SHEET
Silicone Spray
Hazardous Polymerization:

Will occur [

]

Page: 6
Printed: 10/28/2013
Revision: 10/25/2013
Supercedes Revision: 11/03/2009

Will not occur [ X ]

Conditions To Avoid - Hazardous Polymerization

Will Not Occur.

11. Toxicological Information
Toxicological Information

Toxicological Exposure to Ingredients:
n-Heptane:
Gas LC50: Acute: 103,000 mg/m3 for 4 hours (rat)- convulsions;
Dermal LD50: Acute > 2,000 mg/kg rabbit
Intravenous LD50: Acute 222 mg/kg mouse
n-Heptane is a mucous membrane and respiratory tract irritant, but non-irritating to the eyes. It is irritating to the
skin and readily absorbed by either inhalation or dermal exposure. Exposure may cause decreased red blood cell
counts, liver and heart damage, and central nervous system depression. Repeated direct skin application can
produce defatting dermatitis. n-heptane is metabolized in the liver to form alcohols and ketones, including
neurotoxic 2,5 heptanedione which is detectable in small amounts in the urine of exposed humans.

Chronic Toxicological Effects

Chronic effects of ingestion and subsequent aspiration into the lungs may cause pneumatocele (lung cavity)
formation and chronic lung dysfunction.
Reports have associated repeated and prolonged occupational overexposure to solvents with irreversible brain
and nervous system damage (sometimes referred to as "Solvent or Painter's Syndrome"). Intentional misuse by
deliberately concentrating and inhaling this product may be harmful or fatal.
Carcinogenicity/Other Information

This product does not contain any components at concentrations above .1% which are considered carcinogenic by
OSHA, IARC, or NTP.
Carcinogenicity:

NTP? No

IARC Monographs? No

OSHA Regulated? No

12. Ecological Information
General Ecological Information

Ecological effects testing has not been conducted on this material.

13. Disposal Considerations
Waste Disposal Method

Hazard characteristics and regulatory waste stream classification can change with product use. Accordingly, it is
the responsibility of the user to determine the proper storage, transportation, treatment and/or disposal
methodologies for spent materials and residues at the time of disposition.
As packaged, this product meets the RCRA definition of an "ignitable".

14. Transport Information
LAND TRANSPORT (US DOT)
DOT Proper Shipping Name

Licensed to Excelda Manufacturing, Inc.

Aerosols, flammable

ANSI Z400.1 format

MATERIAL SAFETY DATA SHEET
Silicone Spray
DOT Hazard Class:

2.1

DOT Hazard Label:

FLAMMABLE GAS

UN/NA Number:

UN1950

Page: 7
Printed: 10/28/2013
Revision: 10/25/2013
Supercedes Revision: 11/03/2009

Additional Transport Information

This product may be reclassified according to the exceptions contained in 49 CFR173.306.
Note: The information contained in Section 14 pertains to the material as shipped in non-bulk containers. If the
material is shipped in bulk containers, other regulations may apply.

15. Regulatory Information
US EPA SARA Title III
Chemical Name

CAS #

Sec.302 (EHS)

Sec.304 RQ

Sec.313 (TRI)

Sec.110

No

No

No

67-64-1 No

Yes 5000 LB

No

Yes

74-98-6 No

No

No

No

75-28-5 No

No

No

No

63148-62-9 No

No

No

No

CAS #

1.

Heptane

142-82-5 No

2.

Acetone

3.

Propane

4.

Isobutane (2-Methylpropane)

5.

Polydimethylsiloxane

US EPA CAA, CWA, TSCA
EPA CWA NPDES

EPA TSCA

CA PROP 65

1.

Chemical Name
Heptane

142-82-5 No

EPA CAA

No

Inventory, 4 Test,
8A PAIR

No

2.

Acetone

67-64-1 No

No

Inventory, 4 Test

No

3.

Propane

74-98-6 No

No

Inventory

No

4.

Isobutane (2-Methylpropane)

75-28-5 No

No

Inventory

No

5.

Polydimethylsiloxane

63148-62-9 No

No

Inventory, 8A, 8A
PAIR

No

SARA (Superfund Amendments and
Reauthorization Act of 1986) Lists:
Sec.302:

EPA SARA Title III Section 302 Extremely Hazardous Chemical with TPQ. * indicates 10000
LB TPQ if not volatile.

Sec.304:

EPA SARA Title III Section 304: CERCLA Reportable + Sec.302 with Reportable Quantity. **
indicates statutory RQ.

Sec.313:

EPA SARA Title III Section 313 Toxic Release Inventory. Note: -Cat indicates a member of a
chemical category.

Sec.110:

EPA SARA 110 Superfund Site Priority Contaminant List

TSCA (Toxic Substances Control
Act) Lists:
Inventory:

Chemical Listed in the TSCA Inventory.

5A(2):

Chemical Subject to Significant New Rules (SNURS)

6A:

Commercial Chemical Control Rules

8A:

Toxic Substances Subject To Information Rules on Production

8A CAIR:

Comprehensive Assessment Information Rules - (CAIR)

8A PAIR:

Preliminary Assessment Information Rules - (PAIR)

8C:

Records of Allegations of Significant Adverse Reactions

8D:

Health and Safety Data Reporting Rules

8D TERM:

Health and Safety Data Reporting Rule Terminations

Licensed to Excelda Manufacturing, Inc.

ANSI Z400.1 format

MATERIAL SAFETY DATA SHEET
Silicone Spray
12(b):

Page: 8
Printed: 10/28/2013
Revision: 10/25/2013
Supercedes Revision: 11/03/2009

Notice of Export

Other Important Lists:
CWA NPDES:

EPA Clean Water Act NPDES Permit Chemical

CAA HAP:

EPA Clean Air Act Hazardous Air Pollutant

CAA ODC:

EPA Clean Air Act Ozone Depleting Chemical (1=CFC, 2=HCFC)

CA PROP 65:

California Proposition 65

International Regulatory Lists:
EPA Hazard Categories:

This material meets the EPA 'Hazard Categories' defined for SARA Title III Sections 311/312 as indicated:
[X] Yes [ ] No Acute (immediate) Health Hazard
[X] Yes [ ] No Chronic (delayed) Health Hazard
[X] Yes [ ] No Fire Hazard
[X] Yes [ ] No Sudden Release of Pressure Hazard
[ ] Yes [X] No Reactive Hazard
Regulatory Information

TSCA: This product and/or its components are listed on the Toxic Substances control Act (TSCA) inventory.
Prop 65: This material may contain the following chemical substances which are known to the State of
California to cause cancer, birth defects or other reproductive harm; and therefore it may be subject to
requirements of California Health and Safety Code Section 25249.5: Benzene 71-43-2 and Toluene 108-88-3
Regulatory Information Statement

The information contained herein is based on data considered accurate. However, no warranty is expressed or
implied regarding the accuracy of this data or the results to be obtained from the use thereof. Vendor assumes no
responsibility for injury to vendee or third person proximately caused by the material if reasonable safety
procedures are not adhered to as stipulated in the data sheet. Additionally, vendor assumes no responsibility for
injury to vendee or third persons proximately caused by abnormal use of the material even if reasonable safety
procedures are followed. Furthermore, vendee assumes all risk in use of the material.

16. Other Information
Company Policy or Disclaimer

THIS INFORMATION IS FURNISHED WITHOUT WARRANTY, EXPRESSED OR IMPLIED, EXCEPT
THAT IS ACCURATE TO THE BEST KNOWLEDGE OF HINO MOTOR SALES USA. THE DATA ON
THIS SHEET RELATES ONLY TO THE SPECIFIC MATERIAL DESIGNATED HEREIN. HINO MOTOR
SALES USA. ASSUMES NO LEGAL RESPONSIBILITY FOR USE OR RELIANCE UPON THIS DATA.

Licensed to Excelda Manufacturing, Inc.

ANSI Z400.1 format

Page: 1

MATERIAL SAFETY DATA SHEET
Rust Penetrant
Flammability

Health

1

4

Instability

Printed:
Revision:
Supercedes Revision:
Date Created:

0
Special Hazard

10/28/2013
10/25/2013
05/11/2007
04/02/2003

1. Product and Company Identification
Product Code:

730-1452-A

Product Name:

Rust Penetrant

Manufacturer/Supplier/Distributor Information
Company Name:

Hino Motor Sales USA, Inc.
41180 Bridge St.
Novi, MI 48375

Phone Number:

(248)699-9300

Fax Number:

(248)699-9310

Part Number:

HN001234024

Revision Date:

10/25/2013

2. Composition/Information on Ingredients
Chemical Name

CAS #

OSHA PEL

ACGIH TLV

Other Limits

1.

OMS Naptha

64742-48-9 30.0 -40.0 %

No data.

No data.

300 PPM

2.

Hydrotreated light distillate (petroleum)

64742-47-8 40.0 -50.0 %

3.

Propane

4.

Isobutane (2-Methylpropane)

Chemical Name

Concentration

No data.

No data.

No data.

74-98-6 5.0 -15.0 %

No data.

No data.