NHTSA ID Number: 10183809
Manufacturer Communication Number: MSDS Sheets
TSB/Document Date: 2020-12-07
Summary
Material Safety Data Sheet
No data.
75-28-5 5.0 -15.0 %
No data.
No data.
No data.
OSHA STEL
OSHA CEIL
ACGIH STEL
ACGIH CEIL
NA
No data.
No data.
No data.
No data.
RTECS #
1.
OMS Naptha
2.
Hydrotreated light distillate (petroleum)
OA5504000
No data.
No data.
No data.
No data.
3.
TX2275000
No data.
No data.
No data.
No data.
4.
Isobutane (2-Methylpropane)
TZ4300000
No data.
No data.
No data.
No data.
3. Hazards Identification
Emergency Overview
Extremely flammable. Combustible liquid and vapor. Contents under pressure. A component is harmful, or fatal,
if swallowed. Aspiration hazard. May cause severe skin irritation after prolonged or repeated contact. A
component may cause allergic skin reaction. Causes eye irritation.
Route(s) of Entry:
Inhalation? Yes
Skin? Yes
Eyes? Yes
Ingestion? Yes
Potential Health Effects (Acute and Chronic)
EYE: Eye Irritant. Contact may cause stinging, watering, redness, and swelling.
SKIN: Skin Irritant. Contact may cause redness and burning of the skin. Prolonged or repeated contact may
cause drying and cracking of the skin and severe skin damage. No harmful effects from skin absorption have
been reported.
INHALATION: No information available. Studies by other exposure routes suggest a low degree of toxicity.
INGESTION: A component of this material is toxic. May be harmful, or fatal, if swallowed. Aspiration HazardThis material can enter lungs during swallowing or vomiting and cause lung inflammation and damage.
Signs and Symptoms Of Exposure
Effects of overexposure may include irritation of the nose and throat, irritation of the digestive tract, headaches,
nausea, vomiting, diarrhea, signs of nervous system depression , abdominal pain, an allergic skin reaction through
repeated contact, pneumonitis, blood disorders, and jaundice.
Licensed to Excelda Manufacturing, Inc.
ANSI Z400.1 format
MATERIAL SAFETY DATA SHEET
Rust Penetrant
Page: 2
Printed: 10/28/2013
Revision: 10/25/2013
Supercedes Revision: 05/11/2007
Medical Conditions Generally Aggravated By Exposure
Skin disorders, blood disorders and liver disorders.
OSHA Hazard Classes:
HEALTH HAZARDS : Irritant
PHYSICAL HAZARDS : Compressed Gas, Flammable Gas, Flammable Liquid/Solid
TARGET ORGANS & EFFECTS: Lungs, Eyes, Skin, Blood, Liver, Central Nervous System, Respiratory
System
4. First Aid Measures
Emergency and First Aid Procedures
EYES: Move victim away from exposure and into fresh air. If irritation or redness develops, flush eyes with
clean water and seek medical attention. For direct contact, hold eyelids apart and flush the affected eye(s) with
clean water for at least 15 minutes. Seek medical attention.
SKIN: Remove contaminated shoes and clothing, and flush affected area(s) with large amounts of water. If skin
surface is damaged, apply a clean dressing and seek medical attention. If skin surface is not damaged, cleanse
affected area thoroughly by washing with mild soap and water. If irritation or redness develops, seek medical
attention.
INHALATION: If respiratory symptoms develop, move victim away from source of exposure and into fresh air.
If symptoms persist, seek medical attention. If victim is not breathing immediately begin artificial respiration. If
breathing difficulties develop, oxygen should be administered by qualified personnel. Seek immediate medical
attention.
INGESTION: Aspiration hazard: Do not induce vomiting or give anything by mouth because this material can
enter the lungs and cause severe lung damage. If victim is drowsy or unconscious, place on the left side with the
head down. If possible, do not leave victim unattended.
Seek medical attention.
Note to Physician
If an allergic reaction to this material develops, avoid further contact.
5. Fire Fighting Measures
Flash Pt:
< -150.00 F (-101.1 C)
Explosive Limits:
LEL: No data.
Autoignition Pt:
No data available.
Method Used: Estimate
UEL: No data.
Fire Fighting Instructions
Emergency responders in the danger area should wear bunker gear and self-contained breathing apparatus for
fires beyond the incipient stage. In addition, wear other appropriate protective equipment as conditions warrant.
Isolate damage area, keep unauthorized personnel out. Stop spill/release if it can be done with minimal risk.
Move undamaged containers from danger area if it can be done with minimal risk. Water spray may be useful
in minimizing or dispersing vapors. Cool equipment exposed to fire with water, if it can be done with minimal
risk. Avoid spreading burning liquid with water used for cooling purposes.
Flammable Properties and Hazards
Contents under pressure, exposure to high temperatures (greater than 130 F) may result in the eruption of
containers and release of highly flammabnle gaseous vapors. Released gasses may cause flash fire. Released
liquid is combustible and may generate ignitable vapors at, or near, its flashpoint.
Flashpoint of compressed gas is < -150 F
Flashpoint of liquid is 140 F
Licensed to Excelda Manufacturing, Inc.
ANSI Z400.1 format
MATERIAL SAFETY DATA SHEET
Rust Penetrant
Page: 3
Printed: 10/28/2013
Revision: 10/25/2013
Supercedes Revision: 05/11/2007
Hazardous Combustion Products
Oxides of carbon including carbon dioxide and carbon monoxide.
Extinguishing Media
Foam, CO2, Dry chemical or halon is recommended. Use water spray to cool fire exposed surfaces and to protect
personnel.
Halon may decompose into toxic material. Carbon dioxide can displace oxygen. Use caution when applying
halon or carbon dioxide in confined spaces.
Unsuitable Extinguishing Media
Water may be ineffective for extinguishment, unless under favorable conditions by experienced fire fighters.
6. Accidental Release Measures
Steps To Be Taken In Case Material Is Released Or Spilled
Keep all sources of ignition and hot metal surfaces away from spill/release. Use explosion proof equipment.
Stay upwind and away from spill/release. Isolate danger area and keep unauthorized personnel out. Stop
spill/release if it can be done with minimal risk. Wear appropriate protective equipment including respiratory
protection as conditions warrant. Prevent spilled material form entering sewers, storm drains, other unauthorized
treatment drainage systems, and natural waterways. Dike far ahead of spill for later recovery or disposal Use
foam on spills to minimize vapors. Spilled material may be absorbed into an appropriate absorbent material.
Notify fire authorities and appropriate federal, state, and local agencies. Immediate cleanup of any spill is
recommended. If spill of any amount is made into or upon navigable waters, the contiguous zone, or adjoining
shorelines, notify the National Response Center (800-424-8802).
7. Handling and Storage
Precautions To Be Taken in Handling
Use ventilation adequate to keep exposures below recommended exposure limits. Avoid contact with eyes, skin,
and clothing. Avoid prolonged or repeated contact with skin. Do not taste or swallow. Vapor can be ignited by
static discharge. The use of respiratory protection is advised when concentrations exceed any established
exposure limits. Wash thoroughly after handling. Do not wear contaminated clothing or shoes. Use good
personal hygiene practice.
Precautions To Be Taken in Storing
Use and store this material in cool, dry, well-ventilated areas away from heat, direct sunlight, hot metal surfaces,
and all sources of ignition. Post area "NO Smoking or Open Flame." Keep away from any incompatible material.
Protect container against physical damage. Indoor storage should meet OSHA standards and appropriate fire
codes.
Other Precautions
Empty containers retain residue (liquid and/or vapor) and may be dangerous. Do not pressurize, cut, weld,
braze, solder, drill, grind, or expose such containers to heat, flame, sparks, or other sources of ignition. They
may explode and cause injury or death. All containers should be disposed of in an environmentally safe manner
and in accordance with governmental regulations.
8. Exposure Controls/Personal Protection
Respiratory Equipment (Specify Type)
The use of respiratory protection is advised when concentrations are expected to exceed the established exposure
limits. Depending on the airborne concentration, use a respirator with appropriate cartridges or supplied-air
equipment.
Eye Protection
Approved eye protection to safeguard against potential eye contact, irritation, or injury is recommended.
Licensed to Excelda Manufacturing, Inc.
ANSI Z400.1 format
MATERIAL SAFETY DATA SHEET
Rust Penetrant
Page: 4
Printed: 10/28/2013
Revision: 10/25/2013
Supercedes Revision: 05/11/2007
Protective Gloves
Impervious gloves.
Other Protective Clothing
Eye wash and quick drench shower facilities should be available in the work area. Thoroughly clean shoes and
wash contaminated clothing before reuse. It is recommended that impervious clothing be worn.
Engineering Controls (Ventilation etc.)
If current ventilation practices are not adequate to maintain airborne concentrations below the established
exposure limits, additional ventilation or exhaust systems may be required. Where explosive mixtures may be
present, electrical systems safe for such locations must be used.
Work/Hygienic/Maintenance Practices
No data available.
9. Physical and Chemical Properties
Physical States:
[ X ] Gas
Melting Point:
No data.
Boiling Point:
No data.
Autoignition Pt:
No data.
Flash Pt:
< -150.00 F (-101.1 C)
Specific Gravity (Water = 1):
0.79 - 0.81
Vapor Pressure (vs. Air or mm Hg):
No data.
Vapor Density (vs. Air = 1):
No data.
Evaporation Rate:
No data.
Solubility in Water:
No data.
Percent Volatile:
No data.
VOC / Volume:
48.8000 WT%
[ X ] Liquid
[ ] Solid
Method Used: Estimate
at 25.0 C (77.0 F)
Appearance and Odor
Aerosol mixture of liquid and compressed gas. Liquid is thin, light amber colored liquid; characteristic vanilla
odor.
Other than VOC information, all other physical property data is based solely on the liquid component of the
mixture.
10. Stability and Reactivity
Stability:
Unstable [
]
Stable [ X ]
Conditions To Avoid - Instability
High temperatures, sparks and open flame.
Incompatibility - Materials To Avoid
Avoid contact with strong oxidizing agents.
Hazardous Decomposition Or Byproducts
Combustion can yield major amounts of oxides of carbon and minor amounts of oxides of sulfur and nitrogen.
Hazardous Polymerization:
Will occur [
]
Will not occur [ X ]
Conditions To Avoid - Hazardous Polymerization
None known.
Licensed to Excelda Manufacturing, Inc.
ANSI Z400.1 format
MATERIAL SAFETY DATA SHEET
Rust Penetrant
Page: 5
Printed: 10/28/2013
Revision: 10/25/2013
Supercedes Revision: 05/11/2007
11. Toxicological Information
Toxicological Information
No data available.
Chronic Toxicological Effects
No data available.
Carcinogenicity/Other Information
No data available.
Carcinogenicity:
NTP? No
IARC Monographs? No
OSHA Regulated? No
12. Ecological Information
General Ecological Information
No data available.
13. Disposal Considerations
Waste Disposal Method
Dispose of in accordance with all Federal, State, Provincial and local laws and regulations. As packaged this
product exhibits the characteristic of ignitability.
14. Transport Information
LAND TRANSPORT (US DOT)
DOT Proper Shipping Name
Aerosols, flammable
DOT Hazard Class:
2.1
DOT Hazard Label:
FLAMMABLE GAS
UN/NA Number:
UN1950
Additional Transport Information
As packaged, this material may be eligible to be reclassified according to 49 CFR 173.306.
15. Regulatory Information
US EPA SARA Title III
Chemical Name
CAS #
Sec.304 RQ
Sec.313 (TRI)
Sec.110
1.
OMS Naptha
64742-48-9 No
Sec.302 (EHS)
No
No
No
2.
Hydrotreated light distillate (petroleum)
64742-47-8 No
No
No
No
3.
74-98-6 No
No
No
No
4.
Isobutane (2-Methylpropane)
75-28-5 No
No
No
No
US EPA CAA, CWA, TSCA
Chemical Name
CAS #
EPA CWA NPDES
EPA TSCA
CA PROP 65
1.
OMS Naptha
64742-48-9 No
EPA CAA
No
Inventory
No
2.
Hydrotreated light distillate (petroleum)
64742-47-8 No
No
Inventory
No
3.
74-98-6 No
No
Inventory
No
4.
Isobutane (2-Methylpropane)
75-28-5 No
No
Inventory
No
SARA (Superfund Amendments and
Reauthorization Act of 1986) Lists:
Sec.302:
EPA SARA Title III Section 302 Extremely Hazardous Chemical with TPQ. * indicates 10000
LB TPQ if not volatile.
Sec.304:
EPA SARA Title III Section 304: CERCLA Reportable + Sec.302 with Reportable Quantity. **
indicates statutory RQ.
Sec.313:
EPA SARA Title III Section 313 Toxic Release Inventory. Note: -Cat indicates a member of a
chemical category.
Licensed to Excelda Manufacturing, Inc.
ANSI Z400.1 format
MATERIAL SAFETY DATA SHEET
Rust Penetrant
Sec.110:
Page: 6
Printed: 10/28/2013
Revision: 10/25/2013
Supercedes Revision: 05/11/2007
EPA SARA 110 Superfund Site Priority Contaminant List
TSCA (Toxic Substances Control
Act) Lists:
Inventory:
Chemical Listed in the TSCA Inventory.
- 💯【Conta.ct us for Support Directly】If you met any...
- 🔥🔥🔥【2026 AUTEL FLAGSHIP MK900BT MK900-BT, NEW...
- 🚗【3000+ ACTIVE TESTS (50➡3000+), SAME AS MS...
- 🚗【40+ HOT SERVICES FOR 150 MAKES (28+➡40+)】Full...
- 🚗【OE ALL SYSTEM DIAGNOSE, AUTO SCAN 2.0: SCAN LICENSE...
- 【TURN OFF CEL】 This AL319 car scanner diagnostic tool...
- 【EXTENSIVE APPLICATION】 Autel AL319 Compatible with...
- 【FOR END USER & DIYERS】 This error code reader AL319 is...
- 【USER-FRIENDLY DESIGN】 This OBD2 scanner and check...
- 【HIGH-QUALITY SERVICES】 12 months war.ranty from the...
If the PDF is very large, it may not load in the preview below.
Some older TSBs had multiple PDFs — visit the NHTSA Website to view all PDFs.
If the TSB PDF does not show, download or view it on the NHTSA Website.
Click on the (+) Plus Sign
Then Click on Associated Document(s)
Search NHTSA Database for Recalls
Search NHTSA Database for Vehicle Investigations
View Latest Vehicle Investigations
Search NHTSA Database for Vehicle Complaints
View Latest Vehicle Complaints
TSB/Document ID: MSDS Sheets
Replacement Service Bulletin Number:
MFR Communication Date: 2012-08-01
MFR Internal Campaign ID/Software Version:
Communication Type: Service Bulletin/Repair Instructions
NHTSA Components: POWER TRAIN
MFR Component System:
MFR Component Subsystem:
Previous TSB | Next TSB |
- [Notice] When you receive a used device, it may be a customer return resold by Amazon without inspection. You can exchange it for a new one through Amazon. As this situation is unavoidable, we sincerely apologize. For any issues, contacting us via Amazon's "Messages" is the best way. THINKSCAN 689BT Bidirectional Scan Tool Can Be Used Immediately After It is Turned On, Without Complicated Registration Process, Which is More Convenient & Quick.
- Full Bi-Directional Control & 3000+ Active Tests: Take control and test components like actuators, fuel injectors, relays, and cooling fans in real time. You’ll quickly see if the problem is in the part itself or the control module — saving you hours of guesswork and frustrating trial-and-error.
- Advanced ECU Coding Capabilities: Handle module matching and hidden feature activation with confidence. When you replace an ECU or want to customize settings, this obd2 scanner diagnostic bi directional tool gives you the professional-level capabilities you need without the dealership price tag.
- 34+ Useful Reset and Maintenance Functions: Complete everyday service tasks smoothly with a wide range of helpful reset and maintenance functions. Whether you’re keeping up with regular upkeep or tackling a specific job, this scanner makes maintenance simpler and less stressful for both DIYers and pros.
- Comprehensive Full System Diagnostics: Diagnose every major system — Engine, Transmission, ABS, SRS, TPMS, and more — all in one place. Finally stop wondering if you’re missing something important; get the full picture and clear codes with ease.
- Top Reasons to Choose the D7S OBD2 Scanner: XTOOL D7S car scan tool, an upgrade of XTOOL D7, offers comprehensive features for automotive technicians, workshops, and DIY enthusiasts 1. Upgraded Hardware: 2+64GB memory, rear camera, intuitive interface, foldable bracket 2. Complete Diagnostics: FCA
Autoauth, OE-level all system scan, 39+ maintenance services, 4K+ bidirectional, CANFD/DoIP protocol 3. Advanced Capabilities: ECU c0ding, PMI functions 4. Wide Compatibility: Support 10,000+ models, covering 99% vehicle brands 5. Multi-language: Available in 22+ languages, No IP Restrictions 6. 3-Year Updates: Save 300 bucks on software updates for the latest features and optimizations - 2026 Upgraded D7S Car Scanner Features: The newly 2026 D7S V2.0 scanner for car brings exciting features for advanced vehicle diagnostics and enhanced user experience 1. FCA AutoAuth: Now supports FCA SGW module for Chrysler, for Jeep, for Dodge (2018+), for Fiat (2017+), enabling faster vehicle communication without gateway restrictions 2. PMI (Offline ECU Pr0gramming): Allows for Ford, for Lincoln, and for Mazda ECU pr0gramming for new modules 3. Optimized Diagnostic Report 2.0: Personalized reports with logos and customer info for auto shops. Note: Compatibility varies by cars, please check before order
- 39+ Services/Resets/Adaptations/Relearns/Calibrations: XTOOL D7S full system car scanner diagnostic tool tackles 99% of common car issues through its 36+ special functions, including Oil Reset, EPB, SAS, BMS, Throttle Reset, Injector C0ding, ABS Bleed, TPMS Reset, Power Balance, etc and also covers specific-vehicle functions like Crank Sensor Relearn, ABS Initialization, Cylinder Power Balance, Fuel Trim Reset, Idle Relearn etc. This car diagnostic scanner enhances efficiency, making repairs and maintenance hassle-free. Tip: DO NOT for All vehicles, please check compatibility first
- Cost-effective ECU C0ding Scan Tool for Specific Brands: Enhance your vehicle's performance with XTOOL D7S! This obd2 scanner all systems bidirectional offers advanced capabilities at an affordable price, supports online for BMW, for Benz and offline for BENZ, for MIT, along with PMI functions for Ford, for Mazda, and for Lincoln
. Ideal for technicians and DIY enthusiasts, this automotive scanner diagnostic tool optimizes vehicle performance and enhances the driving experience. Note: Not for all cars and modules, please send car VIN to check the compatibility before purchase - OE All System Diagnostic & 8 Pids Graphing: XTOOL D7S is a comprehensive all system bi directional obd2 scanner that delivers dealer-level diagnostics, completely controlling over your vehicle’s performance and health. This automotive scan tool can read and clear DTCs, view live data and ECU information, retrieve freeze frames, and perform active tests and full obd2 functions. This bi-directional scan tool can can identify your vehicle's make, model, and year information with just one click and show up to 8 PIDs live data with options for CSV viewing, playback, and recording for in-depth analysis. It is easy-to-use for both professionals and beginners, helping pinpoint issues efficiently
- 【✅Compared to BOSSCOMM IF742, IF745 Offers Full-System Diagnostics】The BOSSCOMM IF745 car diagnostic scanner is an upgraded model of IF742. In addition to supporting all OBD2 Code Reader functions and 6 reset options (ABS/EPB/SAS/BMS/Oil/Throttle), it expands diagnostics from 4 systems (Check Engine/ABS/SRS/Transmission) to vehicle All systems, including Steering, Suspension, and Body Electronics. This provides deeper, more comprehensive diagnostic capabilities.
- 【✨10 OBD2 Functions】The BOSSCOMM IF745 scan tool’s DTC Lookup instantly translates fault codes into user-friendly explanations, its I/M Readiness feature streamlines emissions testing with a single tap, and Freeze Frame lets you pinpoint the exact moment of a fault for in-depth root-cause diagnosis. Combined with a live data dashboard and advanced diagnostics (O2S, OBMon, EVAP), it delivers comprehensive insights for confident troubleshooting.
- 【✨Deep Diagnostics for All Vehicle System Modules】Beyond code reading/clearing and ECU information retrieval, our all-in-one data stream feature lets you inspect all current fault codes and their locations across the vehicle’s systems. This vehicle code reader helps you turn off dashboard warning lights and perform a comprehensive self-check of your car at home—no more back-and-forth trips to the repair shop or hefty inspection fees.
- 【✨6 Essential Resets: ABS Bleeding, Oil, EPB, SAS, Throttle, BMS】The BOSSCOMM IF745 obd2 scanner diagnostic tool swiftly purges air from brake lines to restore braking sensitivity, fine-tunes maintenance cycles to eliminate false alerts, resolves parking brake issues with one-click control, recalibrates steering sensors for stability, optimizes engine idling/acceleration for smoother performance, and deeply resets battery systems to extend lifespan and range via precise parameter adjustments.❗NOTE: Does NOT support bidirectional control, coding, or programming.
- 【✨10,000+ Car Models, AutoVIN, 13 Languages】The BOSSCOMM IF745 vehicle scanner diagnostic tool covers 73+ global car brands and offers support in 13 languages, making it perfect for DIYers, auto mechanics, or as a thoughtful gift. With a single-click AutoVIN feature, it instantly retrieves vehicle serial numbers, streamlining diagnostics for users globally. This adaptable tool balances user-friendliness with precision, catering to both personal and professional requirements.✅Unsure about compatibility? Compatibility will vary on vehicles' model and year, pls reach us via 📧 [email protected] 📧 before purchase.
This product presentation was made with AAWP plugin.