“This site contains affiliate links for which OEMDTC may be compensated” |
May 27, 2022 NHTSA CAMPAIGN NUMBER: 22V386000
Rear Hinge Assembly Insufficiently Welded
An insufficient weld may cause the rear hinge assembly to fail, increasing the risk of an injury.
NHTSA Campaign Number: 22V386
Manufacturer Ox Bodies, Inc.
Components STRUCTURE
Potential Number of Units Affected 4,696
Summary
Ox Bodies, Inc. (Ox Bodies) is recalling certain 2019-2021 Stampede, Maverick, Chisholm, Trash Body, Flat Dump, Stock Yard, Load King, Aluminum, Chipper, Chisholm Lite, Frontier, and Trailmaker dump bodies. The weld in the rear hinge assemblies of the dump bodies may be insufficient.
Remedy
Ox Bodies will repair the rear hinge assembly welds, free of charge. Owner notification letters were mailed on July 15, 2022. Owners may contact Ox Bodies’ customer service at 1-205-932-5720.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Ox Bodies, Inc. has determined that a defect which relates to motor vehicle safety exists in certain replacement rear hinges outsourced from an outside supplier and used in the manufacture of Ox Bodies vehicles from June 2019 through August 2021. Our records indicate that your vehicle (identified by VIN above) may be affected. We are initiating a safety recall to address this condition.
REASON FOR RECALL
It has come to our attention that the rear hinge outsourced during this time and used to install the dump body to the truck frame has a potential weld defect. Should the rear hinge assembly weld fail, the body could detach and/or cause the truck to become unstable, increasing the risk of property damage, a vehicle crash without warning, and/or personal injury or death. As a result, dump bodies manufactured with this outsourced rear hinge will need to be inspected and repaired to resolve this issue.
WHAT WE WILL DO
Ox Bodies will repair and reinforce the hinge free of charge. The repair will take approximately two hours to complete.
WHAT YOU SHOULD DO
Please contact Ox Bodies (see contact information below) as soon as possible to arrange a service date to have the rear hinge assembly repaired. Ox Bodies will arrange for the repair of your vehicle without charge upon being contacted.
Contact Information:
Ox Bodies Service Email: oxservice@tbei.com *preferred contact method Ox Bodies Service Voice Messaging: (205) 932-8185 We will strive to respond within 48 hours.
We recommend that you immediately inspect your rear hinge assembly welds for any separation or cracking. Be sure to thoroughly clean the rear hinge assembly before inspection. If weld separation or cracking is found, do not use your vehicle and please contact Ox Bodies immediately to expedite your repair.
If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. For more information, contact Ox Bodies Warranty Department at 205-932-8148.
If a designated repair facility is unable to complete these repairs without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1-888-327-4236; (TTY: 1-800-424-9153); or go to http://www.safercar.gov.
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten (10) days.
We regret any inconvenience that this action may cause you, but we are taking these steps in the interest of your safety and satisfaction with your Ox Bodies product.
Chronology :
March – April 2022: Ox Bodies received three reports of hinge failures during March and April 2022. These failures appeared to be the result of poor welds/weld penetration similar to conditions Ox Bodies had previously observed. (Ox Bodies’ supplier made process improvements in October/November 2020.) A review of warranty data identified 12 prior warranty claims received from March 2020 – November 2021 related to the rear hinge assembly.
April – May 20, 2022: Field and warranty data were analyzed, and the potential safety risk(s) of a failed hinge was evaluated and considered. A review of warranty data identified 12 prior warranty claims received from March 2020 – November 2021 related to the rear hinge assembly.
May 20, 2022: Based upon its evaluation of the existing data and consideration of potential safety risks, Ox Bodies decided to conduct a safety recall to repair the welds on the hinge assemblies on the subject vehicles/bodies.
To date, no injuries have been reported related to this condition.
36 Affected Products
Vehicles
MAKE | MODEL | YEAR |
OX BODIES | ALUMINIUM | 2019-2021 |
OX BODIES | CHIPPER | 2019-2021 |
OX BODIES | CHISHOLM | 2019-2021 |
OX BODIES | CHISHOLM LITE | 2019-2021 |
OX BODIES | FLAT DUMP | 2019-2021 |
OX BODIES | FRONTIER | 2019-2021 |
OX BODIES | LOAD KING | 2019-2021 |
OX BODIES | MAVERICK | 2019-2021 |
OX BODIES | STAMPEDE | 2019-2021 |
OX BODIES | STOCK YARD | 2019-2021 |
OX BODIES | TRAILMAKER | 2019-2021 |
OX BODIES | TRASH BODY | 2019-2021 |
13 Associated Documents
Defect Notice 573 Report
RCLRPT-22V386-2859.PDF 218.921KB
Recall Acknowledgement
RCAK-22V386-7264.pdf 646.218KB
Recall 573 Report- 06/29/2022
RCLRPT-22V386-3375.PDF 219.03KB
Recall 573 Report-06/29/2022
RCLRPT-22V386-2405.PDF 219.03KB
Recall 573 Report-06/29/2022
RCLRPT-22V386-6446.PDF 219.03KB
Recall 573 Report- 06/29/2022
RCLRPT-22V386-7683.PDF 219.03KB
Recall 573 Report- 06/29/2022
RCLRPT-22V386-5823.PDF 219.03KB
Recall 573 Report-06/29/2022
RCLRPT-22V386-2350.PDF 219.03KB
Recall 573 Report- 09/08/2022
RCLRPT-22V386-4643.PDF 247.668KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22V386-6998.pdf 234.579KB
Recall Quarterly Report #1, 2022-3
RCLQRT-22V386-8856.PDF 211.129KB
Recall Quarterly Report #2, 2022-4
RCLQRT-22V386-2295.PDF 211.225KB
Recall Quarterly Report #3, 2023-1
RCLQRT-22V386-5697.PDF 211.316KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V386&docType=RCL
- [MORE POWERFUL] Up to 135 Amp output allows you to weld mild steel up to 2/5” in the plate. Suitable for 2LB .030” & .035” flux core wire.
- [MULTI-PROCESS] 3-in-1 Welder, capable of Gasless MIG/Stick/Lift TIG. (need to buy an extra lift TIG torch) Meets your various welding needs.
- [DIGITAL DISPLAY] Advanced digital display, increases the visual clarity and improves the efficiency of the operation.
- [SYNERGIC CONTROL] When adjusting the wire feeding speed, the voltage will be automatically matched. Suitable for beginners and professionals.
- [SAFETY FIRST] Automatic compensation for voltage fluctuation, over current protection, over load protection.
- SYNERGIC CONTROL: The recommend current and wire feeding speed will be automatically matched after selected diameter of the welding wire(you can choose .030”/.035”/.040" flux core wire). The MIG welder is easier for beginners or those that are learning to weld and want to make small repairs around the house. 1 Free Flux Core Wire .030".
- 3-IN-1 WELDER: 3 welding modes Flux Core Gasless MIG/ Lift TIG/ MMA meet your different requirements (Need to buy extra Lift tig torch). Adjust the current and 10-speed variable feed controls for perfectly managed flux-cored welding of carbon steel, stainless or even thicker steel, Ideal for home DIY, outdoor repairs, rusty metal, farm and road equipment, and maintenance and repairs.
- SAFETY PROTECTION: The welder comes with an attached MIG torch and power cable, you can weld after unpacking the box, it’s convenient to use. Built-in over-current protection, over-load protection, overheating, and over-voltage function that extend the lifespan of the machine.
- PORTABLE AND COMPACT: The machine weighs only 11.79 pounds, and you can freely carry it anywhere with a handle or shoulder strap. Package includes 1* MIG130 Welder, 1* MIG Torch, 1*Ground Clamp, 1* Electronic Holder, 1* .030"/2lb Flux Cored Wire,1* 0.8/.030" conductive Nozzle,1* 0.9/.035" conductive Nozzle,1* Brush&Hammer,1* User Manual.
- WARM SERVICE & 2-YEAR WARRANTY: 30-Day Money Back Guarantee and 2-Year Warranty. Ideal for fathers day gifts. Every single of our welder machines passed various authoritative Laboratory tests in simulating extremely harsh environments before leaving our ARCCAPTAIN factory that conforms to the high standards.
- WELD ANYWHERE: Plug in the Weld-Pak 90i MIG wire feed welder anywhere 120V input power is available; It's designed to use with flux-cored welding wire (1/4” max thickness) or solid MIG wire (3/16" max thickness)
- ACCESSORIES INCLUDED: The machine comes with a full list of accessories including a welding gun, nozzle, contact tip, work cable and clamp; Metal case provides protection from the elements
- LIGHT & PORTABLE: Ideal for maintenance and mobile welders, thanks to its small and lightweight (15 lbs) inverter design and shoulder strap for portability; A good choice for professionals but it’s an easy to use welder for beginners too
- SMOOTH & EASY OPERATION: Has simple control with two knobs for wire speed and voltage; Inverter power source makes it more efficient to operate and provides smoother weld characteristics compared to traditional welders
- PERFECT FOR SMALL WELD JOBS: This machine is best for DIY projects, hobbyists, home repairs and more; Infinite welding voltage allows fine-tuning of weld characteristics
- Synergic Control: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.
- Multi-functions in one machine: Suitable for stick, lift TIG(torch is not included), flux MIG, gas MIG
- Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate.
- Big enough to apply to 2 and 10 pounds rolls of wire. Ready to feed .030"(0.8mm) with solid core wire, and .035" (0.9mm)with flux core wire.Can Handle E7018 basic electrode.
- Dual voltage input design: Welding machine can be plugged into 110(120)V / 220(230)V dual voltage (Automatic fitting).
- 4 in 1 Welding Machine:This is a multifunctional welding machine,suitable for MMA, Lift TIG, flux MIG, gas MIG,4 welding modes for you to choose.
- Synergic Control: Adjusting the amperage or choosing different wire thicknesses,the voltage and wire feeding speed will automatically change.Even a beginner can easily use it.
- Gas/Gasless Welding: You can choose Flux Core Wire(Gasless) or Solid Wire(Gas). This Welder Can handle 2 lb and 10 lb rolls of wire 0.8mm~1.0mm Flux Core Wire/Solid Wire, MAX Welding Thickness 8.0mm.
- Lift TIG/ARC Welding: Lift TIG available,TIG Torch fits WP17V, not included in the package.TIG Welding thickness 1.0MM-8.0MM, Suitable for thin work-pieces such as stainless steel, alloy steel, carbon steel etc.Arc Welding fits rods E6013.
- Powerful And Safe Machine:This 200A Welding machine can weld mild up to 8.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.
- 【EASY TO USE】: The welding machine has included with voltage control knob,wire speed adjustment knob and with synergic control, automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. Even beginners can use it easily.
- 【POWERFUL AND SAGE WELDER MACHINE】: This 130A Welding machine can weld mild up to 3.0mm plate,equipped with overload and overheating system,feel free to use,it’s very safe.Big enough to handle 2.2 pound rolls of wire.
- 【PORTABLE DESIGN】: Lightweight and compact design, with a comfortable hand grip that makes it easy to carry wherever you want; It only weighs 8.6 lbs., so you can effortlessly take it as far as you can.
- 【WIDE APPLICATIONS】: It can be used with a wide variety of metals and alloys. Suitable for home users, DIY craft enthusiasts, beginners and small projects.
- 【PACKAGE INCLUDES】: 130 MIG welding machine; Mig torch; Ground clamp; Brush&Hammer; 1lb .030" flux cored welding wire; Contact Tip*2.
- 【POWERFUL 3-IN-1 MIG WELDER】The 135Amp MIG welder that included Gas/Solid Wire MIG(GMAW), Gasless Flux Core MIG(FCAW), Stick/MMA. The machine is delivered ready for operation without adjustments with 0.8 mm diameter filler wire.Also, 0.6 mm, 0.9 mm or 1.0mm solid wire or cored wire can be used as filler wire.
- 【SYNERGIC CONTROL】Adjusting the welding power according to sheet thickness affects simultaneously both wire feed speed and amount of current lead to the wire. This is a good starting point for welding in different operating situations.It's suitable for both hobby and professional use.
- 【IGBT TECHNOLOGY】IGBT intelligent inverter technology. IGBT power device with unique control mode improves the reliability of welding machine. The flux core welder works more efficiently, reduces energy loss, and welds better.
- 【PACKAGE INCLUDED】1*MIG/MMA Welder; 1*8.2ft CCA cable with 200A Electrode holder; 1*8.2ft CCA cable with 200A Earth clamp; 1*8.2ft Power cable with American standard plug; 1*8.2ft fixed MIG; 1*slag hammer; 1*User Manual
- 【SAFETY & DURABLE】The machine has passed a variety of professional tests and certifications before leaving the factory.The welding gun has an overheating protector which prevents operation when the machine is overheated. The machine is also protected from too low or too high supply voltage.
- ➠【𝐒𝐲𝐧𝐞𝐫𝐠𝐢𝐜 𝐌𝐈𝐆 𝐂𝐨𝐧𝐭𝐫𝐨𝐥】The wire feeding speed (current) and welding voltage will be automatically matched after selected diameter of the welding wire (.030/.035 inch flux core wire). The MIG welder is easier to make a beginner becoming a master welder.
- ➠【𝐒𝐦𝐚𝐫𝐭 𝐒𝐭𝐢𝐜𝐤 𝐖𝐞𝐥𝐝】Bulit-in smart Hot-start and Arc-force provide easy, quick and reliable arc start, and stable welding current, this mini welder has ideal performance for the most E6013, E6011, E6010, E7018 and E308-16 rods.
- ➠【𝐋𝐢𝐟𝐭 𝐓𝐈𝐆 𝐅𝐮𝐧𝐜𝐭𝐢𝐨𝐧】This 3 in 1 welder has excellent Lift-arc TIG function, just touch the tungsten rod to the workpiece and lift off, easily arc starting, don't need to scratch it, it's like you getting a TIG welder for free.
- ➠【𝐒𝐚𝐟𝐞 𝐚𝐧𝐝 𝐒𝐭𝐚𝐛𝐥𝐞】This multiprocess welder built-in automatic Anti-stick, compensation for voltage fluctuation, over current protection, over heat protection, short circuit damage protection, to make sure the welding kit safely operation and long life.
- ➠【𝐖𝐢𝐝𝐞 𝐀𝐩𝐩𝐥𝐢𝐜𝐚𝐭𝐢𝐨𝐧 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞】The wire feed welder is capable of welding all kinds of ferrous metals such as carbon steel, medium carbon steel, mild steel, stainless steel and cast iron. Only weighs 10.1 lbs, easy to carry with a handle or shoulder strap(included), very suitable for outdoor maintenance, farm, road equipment, and home DIY.
- Simple user interface - Seven segment display with basic knob controls.
- Process Capabilities - MIG, Flux-Cored and Spool Gun.
- Dual Input Voltage - 120V and 230V inputs so you can plug into any common power supply.
- Ergonomic Case - Sleek and robust case design with multiple lift points for ease of mobility around the shop.
- Lightweight and Portable - Only 41 lbs
- 【POWERFUL 3-IN-1 WELDER】Composed with Flux MIG, Lift TIG and Stick/MMA. Our powerful 3-in-1 welding machine meets your requirement for different welding situations like home DIY, outdoor maintenance and repairs, etc. (NOTE: the lift tig torch is not included)
- 【SYNERGIC CONTROL】Equipped with precise data, this flux core welder will automatically match the most suitable voltage, wire feeding speed by adjusting amperage, which is quite friendly for both professional welding worker and beginner. You can also adjust machine parameters by manually In order to best suit for your demand.
- 【SAFE & INTELLIGENT】Our MIG welder features overheat and overload protection will automatically shut off while overheated, and the built-in fan will consistently cool down your welder for 1-2 mins after shutdown. Additionally, the intelligent IGBT technology helps the welder reduce energy loss and works more efficiently.
- 【LIGHTWEIGHT & DURABLE】Item Dimensions: 13.6(L) x 6.6(W) x 11.15(H) inches, welder machine weight: 10.14lbs. This lightweight 135amp stick welder designed with two portable handles, allows you to take it anywhere, and you can add a shoulder belt by your own if need. Besides, IP21 water rating better protect your welder and extend its service life.
- 【SET INCLUDES】To spend you less money and bring you more convenience, our 3-in-1 welder set includes a solar powered auto darkening welding helmet (viewing size: 3.66"x1.69"), a pair of 932°F/500℃ heat resistant leather welding gloves and a roll of E71T-GS .030" 2lb flux core welding wire.
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
IMPORTANT SAFETY RECALL Recall No. 22V386 This notice applies to your vehicle, VIN # July 15, 2022 Customer name Customer Address 1 City, State, Zip Dear Ox Bodies Customer: This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. Ox Bodies, Inc. has determined that a defect which relates to motor vehicle safety exists in certain replacement rear hinges outsourced from an outside supplier and used in the manufacture of Ox Bodies vehicles from June 2019 through August 2021. Our records indicate that your vehicle (identified by VIN above) may be affected. We are initiating a safety recall to address this condition. REASON FOR RECALL It has come to our attention that the rear hinge outsourced during this time and used to install the dump body to the truck frame has a potential weld defect. Should the rear hinge assembly weld fail, the body could detach and/or cause the truck to become unstable, increasing the risk of property damage, a vehicle crash without warning, and/or personal injury or death. As a result, dump bodies manufactured with this outsourced rear hinge will need to be inspected and repaired to resolve this issue. WHAT WE WILL DO Ox Bodies will repair and reinforce the hinge free of charge. The repair will take approximately two hours to complete. WHAT YOU SHOULD DO Please contact Ox Bodies (see contact information below) as soon as possible to arrange a service date to have the rear hinge assembly repaired. Ox Bodies will arrange for the repair of your vehicle without charge upon being contacted. Contact Information: Ox Bodies Service Email: oxservice@tbei.com *preferred contact method Ox Bodies Service Voice Messaging: (205) 932-8185 We will strive to respond within 48 hours. We recommend that you immediately inspect your rear hinge assembly welds for any separation or cracking. Be sure to thoroughly clean the rear hinge assembly before inspection. If weld separation or cracking is found, do not use your vehicle and please contact Ox Bodies immediately to expedite your repair. 2 | P a g e If you had this repair performed before you received this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall. For more information, contact Ox Bodies Warranty Department at 205-932-8148. If a designated repair facility is unable to complete these repairs without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE, Washington, DC 20590, or call the toll-free Vehicle Safety Hotline at 1-888-327-4236; (TTY: 1-800-424-9153); or go to http://www.safercar.gov. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten (10) days. We regret any inconvenience that this action may cause you, but we are taking these steps in the interest of your safety and satisfaction with your Ox Bodies product. Sincerely, Kevin Griggs Quality/Warranty Manager, Ox Bodies, Inc.
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-386 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Ox Bodies, Inc. Submission Date : JUN 29, 2022 NHTSA Recall No. : 22V-386 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Ox Bodies, Inc. Address : PO BOX 886 719 COLUMBUS STREET EAST FAYETTE AL 35555 Company phone : 205-932-5720 Population : Number of potentially involved : 4,696 Estimated percentage with defect : 5 % Vehicle Information : Vehicle 1 : 2019-2021 Ox Bodies, Inc. Stampede Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 2943 Stampede models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2019-2021 Ox Bodies, Inc. Maverick Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : 2-DOOR Power Train : DIESEL Descriptive Information : 1356 Maverick models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-386 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 3 : 2019-2021 Ox Bodies, Inc. Chisholm Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 139 Chisholm models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 4 : 2019-2021 Ox Bodies, Inc. Trash Body Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 80 Trash Body models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 5 : 2019-2021 Ox Bodies, Inc. Flat Dump Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 47 Flat Dump models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 6 : 2019-2021 Ox Bodies, Inc. Trailmaker Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 5 Trailmaker models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-386 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 7 : 2019-2021 Ox Bodies, Inc. Load King Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 35 Load King models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 8 : 2019-2021 Ox Bodies, Inc. Aluminum Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 22 Aluminum models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 9 : 2019-2021 Ox Bodies, Inc. Chipper Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 14 Chipper models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 10 : 2019-2021 Ox Bodies, Inc. Chisholm Lite Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 9 Chishom Lite models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-386 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 11 : 2019-2021 Ox Bodies, Inc. Frontier Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 8 Frontier models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 12 : 2019-2021 Ox Bodies, Inc. Stock Yard Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 38 Stock Yard models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The weld in the rear hinge assemblies of the subject dump bodies may have insufficient weld penetration. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A hinge assembly with insufficient weld penetration may be susceptible to failure, increasing risk of property damage or personal injury to vehicle occupants or others. Description of the Cause : insufficient weld penetration during production by supplier Identification of Any Warning that can Occur : Cracks may be visible on rear hinge assemblies prior to failure. Involved Components : Component Name 1 : rear hinge assembly Component Description : rear hinge assembly Component Part Number : 2214483 Part 573 Safety Recall Report 22V-386 Page 5 The information contained in this report was submitted pursuant to 49 CFR §573 Supplier Identification : Component Manufacturer Name : Fayette Fabrication, LLLP Address : 904 2nd Avenue SE Fayette Alabama 35555 Country : United States Chronology : March – April 2022: Ox Bodies received three reports of hinge failures during March and April 2022. These failures appeared to be the result of poor welds/weld penetration similar to conditions Ox Bodies had previously observed. (Ox Bodies’ supplier made process improvements in October/November 2020.) A review of warranty data identified 12 prior warranty claims received from March 2020 – November 2021 related to the rear hinge assembly. April – May 20, 2022: Field and warranty data were analyzed, and the potential safety risk(s) of a failed hinge was evaluated and considered. May 20, 2022: Based upon its evaluation of the existing data and consideration of potential safety risks, Ox Bodies decided to conduct a safety recall to repair the welds on the hinge assemblies on the subject vehicles/ bodies. To date, no injuries have been reported related to this condition. Description of Remedy : Description of Remedy Program : The weld of the subject rear hinge assemblies will be repaired. Owners will be advised to contact Ox Bodies to arrange to have the repair performed. Ox Bodies will submit a recall-specific reimbursement plan. How Remedy Component Differs from Recalled Component : The weld of the subject rear hinge assemblies will be repaired. Identify How/When Recall Condition was Corrected in Production : After August 1, 2021, Ox Bodies used rear hinge assemblies manufactured in-house by Ox Bodies. Recall Schedule : Description of Recall Schedule : Ox Bodies will notify owners using available VIN data in accordance with the Planned Owner Notification Dates. There are no dealers to be notified. Planned Dealer Notification Date : NR – NR Part 573 Safety Recall Report 22V-386 Page 6 The information contained in this report was submitted pursuant to 49 CFR §573 Planned Owner Notification Date : JUL 15, 2022 – JUL 22, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-386 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Ox Bodies, Inc. Submission Date : SEP 08, 2022 NHTSA Recall No. : 22V-386 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Ox Bodies, Inc. Address : PO BOX 886 719 COLUMBUS STREET EAST FAYETTE AL 35555 Company phone : 205-932-5720 Population : Number of potentially involved : 4,696 Estimated percentage with defect : 5 % Vehicle Information : Vehicle 1 : 2019-2021 Ox Bodies, Inc. Stampede Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 2943 Stampede models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2019-2021 Ox Bodies, Inc. Maverick Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : 2-DOOR Power Train : DIESEL Descriptive Information : 1356 Maverick models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-386 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 3 : 2019-2021 Ox Bodies, Inc. Chisholm Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 139 Chisholm models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 4 : 2019-2021 Ox Bodies, Inc. Trash Body Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 80 Trash Body models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 5 : 2019-2021 Ox Bodies, Inc. Flat Dump Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 47 Flat Dump models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 6 : 2019-2021 Ox Bodies, Inc. Stock Yard Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 38 Stock Yard models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-386 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 7 : 2019-2021 Ox Bodies, Inc. Load King Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 35 Load King models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 8 : 2019-2021 Ox Bodies, Inc. Aluminum Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 22 Aluminum models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 9 : 2019-2021 Ox Bodies, Inc. Chipper Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 14 Chipper models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 10 : 2019-2021 Ox Bodies, Inc. Chisholm Lite Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 9 Chishom Lite models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-386 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 11 : 2019-2021 Ox Bodies, Inc. Frontier Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 8 Frontier models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 12 : 2019-2021 Ox Bodies, Inc. Trailmaker Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 5 Trailmaker models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The weld in the rear hinge assemblies of the subject dump bodies may have insufficient weld penetration. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A hinge assembly with insufficient weld penetration may be susceptible to failure, increasing risk of property damage or personal injury to vehicle occupants or others. Description of the Cause : insufficient weld penetration during production by supplier Identification of Any Warning that can Occur : Cracks may be visible on rear hinge assemblies prior to failure. Involved Components : Component Name 1 : rear hinge assembly Component Description : rear hinge assembly Component Part Number : 2214483 Part 573 Safety Recall Report 22V-386 Page 5 The information contained in this report was submitted pursuant to 49 CFR §573 Supplier Identification : Component Manufacturer Name : Fayette Fabrication, LLLP Address : 904 2nd Avenue SE Fayette Alabama 35555 Country : United States Chronology : March – April 2022: Ox Bodies received three reports of hinge failures during March and April 2022. These failures appeared to be the result of poor welds/weld penetration similar to conditions Ox Bodies had previously observed. (Ox Bodies’ supplier made process improvements in October/November 2020.) A review of warranty data identified 12 prior warranty claims received from March 2020 – November 2021 related to the rear hinge assembly. April – May 20, 2022: Field and warranty data were analyzed, and the potential safety risk(s) of a failed hinge was evaluated and considered. A review of warranty data identified 12 prior warranty claims received from March 2020 – November 2021 related to the rear hinge assembly. May 20, 2022: Based upon its evaluation of the existing data and consideration of potential safety risks, Ox Bodies decided to conduct a safety recall to repair the welds on the hinge assemblies on the subject vehicles/ bodies. To date, no injuries have been reported related to this condition. Description of Remedy : Description of Remedy Program : The weld of the subject rear hinge assemblies will be repaired. Owners will be advised to contact Ox Bodies to arrange to have the repair performed. Ox Bodies will submit a recall-specific reimbursement plan. How Remedy Component Differs from Recalled Component : The weld of the subject rear hinge assemblies will be repaired. Identify How/When Recall Condition was Corrected in Production : After August 1, 2021, Ox Bodies used rear hinge assemblies manufactured in-house by Ox Bodies. Recall Schedule : Description of Recall Schedule : Ox Bodies will notify owners using available VIN data in accordance with the Planned Owner Notification Dates. There are no dealers to be notified. Part 573 Safety Recall Report 22V-386 Page 6 The information contained in this report was submitted pursuant to 49 CFR §573 Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : JUL 15, 2022 – JUL 22, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-386 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Ox Bodies, Inc. Submission Date : MAY 27, 2022 NHTSA Recall No. : 22V-386 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Ox Bodies, Inc. Address : PO BOX 886 719 COLUMBUS STREET EAST FAYETTE AL 35555 Company phone : 205-932-5720 Population : Number of potentially involved : 4,696 Estimated percentage with defect : 5 % Vehicle Information : Vehicle 1 : 2019-2021 Ox Bodies, Inc. Stampede Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 2943 Stampede models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2019-2021 Ox Bodies, Inc. Maverick Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : 2-DOOR Power Train : DIESEL Descriptive Information : 1356 Maverick models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-386 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 3 : 2019-2021 Ox Bodies, Inc. Chisholm Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 139 Chisholm models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 4 : 2019-2021 Ox Bodies, Inc. Trash Body Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 80 Trash Body models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 5 : 2019-2021 Ox Bodies, Inc. Flat Dump Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 47 Flat Dump models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 6 : 2019-2021 Ox Bodies, Inc. Stock Yard Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 38 Stock Yard models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-386 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 7 : 2019-2021 Ox Bodies, Inc. Load King Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 35 Load King models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 8 : 2019-2021 Ox Bodies, Inc. Aluminum Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 22 Aluminum models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 9 : 2019-2021 Ox Bodies, Inc. Chipper Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 14 Chipper models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 10 : 2019-2021 Ox Bodies, Inc. Chisholm Lite Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 9 Chishom Lite models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-386 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 11 : 2019-2021 Ox Bodies, Inc. Frontier Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 8 Frontier models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 12 : 2019-2021 Ox Bodies, Inc. Trailmaker Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : 5 Trailmaker models are covered by this recall. The production date range represents the entire period during which the subject hinges were installed on these dump bodies/vehicles. Production Dates : MAY 28, 2019 – AUG 01, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : The weld in the rear hinge assemblies of the subject dump bodies may have insufficient weld penetration. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : A hinge assembly with insufficient weld penetration may be susceptible to failure, increasing risk of property damage or personal injury to vehicle occupants or others. Description of the Cause : insufficient weld penetration during production by supplier Identification of Any Warning that can Occur : Cracks may be visible on rear hinge assemblies prior to failure. Involved Components : Component Name 1 : rear hinge assembly Component Description : rear hinge assembly Component Part Number : 2214483 Part 573 Safety Recall Report 22V-386 Page 5 The information contained in this report was submitted pursuant to 49 CFR §573 Supplier Identification : Component Manufacturer Name : Fayette Fabrication, LLLP Address : 904 2nd Avenue SE Fayette Alabama 35555 Country : United States Chronology : March – April 2022: Ox Bodies received three reports of hinge failures during March and April 2022. These failures appeared to be the result of poor welds/weld penetration similar to conditions Ox Bodies had previously observed. (Ox Bodies’ supplier made process improvements in October/November 2020.) April – May 20, 2022: Field and warranty data were analyzed, and the potential safety risk(s) of a failed hinge was evaluated and considered. May 20, 2022: Based upon its evaluation of the existing data and consideration of potential safety risks, Ox Bodies decided to conduct a safety recall to repair the welds on the hinge assemblies on the subject vehicles/ bodies. To date, no injuries have been reported related to this condition. Description of Remedy : Description of Remedy Program : The weld of the subject rear hinge assemblies will be repaired. Owners will be advised to contact Ox Bodies to arrange to have the repair performed. Ox Bodies will submit a recall-specific reimbursement plan. How Remedy Component Differs from Recalled Component : The weld of the subject rear hinge assemblies will be repaired. Identify How/When Recall Condition was Corrected in Production : After August 1, 2021, Ox Bodies used rear hinge assemblies manufactured in-house by Ox Bodies. Recall Schedule : Description of Recall Schedule : Ox Bodies will notify owners using available VIN data in accordance with the Planned Owner Notification Dates. There are no dealers to be notified. Planned Dealer Notification Date : NR – NR Planned Owner Notification Date : JUN 27, 2022 – JUL 01, 2022 Part 573 Safety Recall Report 22V-386 Page 6 The information contained in this report was submitted pursuant to 49 CFR §573 * NR – Not Reported
SEOCONTENT-END