“This site contains affiliate links for which OEMDTC may be compensated” |
May 13, 2022 NHTSA CAMPAIGN NUMBER: 22E038000
Fuel pump failure can cause an engine stall, increasing the risk of a crash.
NHTSA Campaign Number: 22E038
Manufacturer Plastic Omnium
Components FUEL SYSTEM, GASOLINE
Potential Number of Units Affected 41,409
Summary
Plastic Omnium (Plastic Omnium) has submitted a Defect Information Report based upon the recall determinations made by Nissan North America, Inc. (recall 21V-957), and Mitsubishi Motors North America, Inc. (recall 22V-027). The fuel tank assemblies contain a fuel pump that may fail.
Remedy
The affected vehicle manufacturers will determine the appropriate remedy for their vehicles and mail owner notification letters. Nissan owners can contact Nissan customer service at 1-800-867-7669. Mitsubishi owners can contact MMNA customer service at 1-888-648-7820.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
December 9th, 2021: Nissan North America Inc filed a Part 573 defect information report identifying a defect in certain Nissan Rogue Vehicles. (See Recall No. 21V-957)
Feb 3rd, 2022: Mitsubishi Motors North America Inc filed a Part 573 defect information report identifying a defect in certain Mitsubishi Outlander Vehicles. (See Recall No. 22V-027)
March – April, 2022 – NHTSA contacted Plastic Omnium in regards to the above recalls. Plastic Omnium contacted the OEM’s in regards to the recalls and worked with NHTSA to obtain information requested.
May 1st, 2022: Based on NHTSA’s request and the two recall reports submitted by two vehicle manufacturers Nissan and Mitsubishi, Plastic Omnium agreed to submit a defect information report under 49 CFR 573.3(f) due to the safety-related defect determinations made by its customers, Nissan and Mitsubishi, concerning the component from TI Automotive. Plastic Omnium’s understanding is that Nissan and Mitsubishi are working directly with TI Automotive on any defects related to this concern.
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
PLASTIC OMNIUM | FUEL TANK ASSEMBLY |
3 Associated Documents
Defect Notice 573 Report
RCLRPT-22E038-6106.PDF 219.558KB
Recall Acknowledgement
RCAK-22E038-1908.pdf 645.911KB
Recall 573 Report – 5/18/2022
RCLRPT-22E038-8363.PDF 219.633KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22E038&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- Universal Design: The included adapters, hoses and fittings cover all fuel injection systems and most Gas Engine Cars, Motorcycles, Trucks, SUVs, ATVs, UTVs, RVs. ( Does not compatible with Bosch, CIS Jetronic, TB System on GM vehicles. )
- Ideal For Mechanics: Fuel Injection Pump Pressure / Oil Combustion Spraying Pressure Gauge Teste.
- Durable: Designed for repeated use with high quality materials.
- Convenient and Safe Design: Fuel pressure tester with a quick release valve button could offer single-handed operation inflation and deflation.
- Measuring Range: 0-140psi (0-10 bar)
- Dual Dial For Accurate Reading, With A 140 PSI /10 Bar Scale
- Deluxe Manometer Fuel Injection Pressure Tester Gauge Kit
- Set comes in a specially designed molded case to make storage easy and organized.
- A time saving quick coupler connection at the end of he gauge hose makes a speedy and efficient couple possible with most adapters.
- The included adapters, hoses and fittings cover all fuel injection systems and most cars and trucks world wide!
- Universal Fuel Injection Tester Kit: Our fuel injection pressure tester kit includes a range of adapters, hoses, and fittings, enabling you to connect to various fuel injection systems and perform thorough fuel pressure tests. Make sure to check compatibility before use.
- Precise Pressure Readings: This fuel pressure tester gauge provides accurate readings from 0-140psi (0-10 bar), aiding in the diagnosis of fuel pump performance and pressure consistency.
- Durable Construction: Crafted from high-quality materials, our fuel injection pump pressure tester is designed for repeated use, ensuring it lasts through numerous tests and troubleshooting sessions.
- Convenient and Safe: Our oil pressure tester is designed with your ease of use and safety in mind. The quick-release valve button facilitates effortless single-handed operation for both inflation and deflation, streamlining the testing process. This thoughtful design not only enhances your convenience but also ensures a safer experience, making it an indispensable tool in your toolkit.
- Wide Application: Our comprehensive kit is compatible with most gasoline/gas engine fuel injection pump systems, making it a versatile tool for diagnosing fuel-related issues in cars, trucks, motorcycles, and more (excluding Bosch, CIS Jetronic, and GM TB systems).
- Sensitive pointer is precise and easy to read. Return to zero automatically with 0 to 140psi (0-10bar) measuring range. A tight connection between meter and hose achieves an accurate testing results.
- To prevent inadvertent discharge of fuel, this fuel injection pressure tester is equipped with quick connect system and pressure release valve fittings with long drain hose to make sure safe and fast use.
- Used on any engine you need to read fuel psi on.Helps identify and diagnose low fuel pressure, a faulty fuel pressure regulator, leaking injectors, fuel leaks, and clogged fuel filters.The included adapters, hoses and fittings cover all fuel injection systems and most cars and trucks world wide.
- Durable & Wear-proof Workmanship-- Made of high quality copper and rubber, our professional fuel tester is firm, rustproof, wear-proof for long time use.Convenient and portable for quick, easy use wherever the job.
- All kits are provided with lifetime technical support and one-year limited warranty.If there is any problem during the purchase period, please contact us at any time, and we will provide the most professional and timely service.
- 【Universal Design】:Fuel pressure Tester kit suits a variety of gasoline engines on car, truck, SUV, Motorcycle, ATV, RV, etc (Bosch, CIS Jetronic, Throttle Body System on GM vehicles excluded), not for diesel high pressure injection pump or direct-injection engine.
- 【Ideal For Mechanics】:measuring range:0-140psi / 0-10bar,Fuel Injection Pump Pressure / Oil Combustion Spraying Pressure Gauge Teste,Automotive fuel injector tester tests if the fuel supply & injection system work normally, help to judge if there are broken internal components or faulty oil lines.
- 【Multipurpose Use】:The 15" hose connects snugly to any 1/4" standard Schrader valve; the 8" hose fits all M6 fuel pressure test ports; and the M8, M10, M12, and M14 adapters make sure this tool kit can be used on a variety of cars, trucks, motorcycles, and more.
- 【Convenient And Safe Design】:Fuel pressure tester with a quick release valve button could offer single-handed operation inflation and deflation.
- 【Satisfied Customer Service】:This fuel injection pump pressure test kit helps to find most auto fuel system issues, it is a must have kit for DIYer or professional mechanic.Any quality related problem in 1 year, we will replace the fittings for free or refund.
- UNIVERSAL DESIGN ---Used on any engine you need to read fuel psi on.Helps identify and diagnose low fuel pressure, a faulty fuel pressure regulator, leaking injectors, fuel leaks, and clogged fuel filters.The included adapters, hoses and fittings cover all fuel injection systems and most cars and trucks world wide!
- FORD ADAPTERS INCLUDED ---Come with 3 adapters with hoses fit with most of the Ford vehicles.
- PARAMETER---Double Scale Gauge:0-10bar,0-140psi.Three size adapters :6.30mm(SAE 1/4)7.89mm(SAE 5/16)9.49mm(SAE 3/8).
- OTC's Fuel Pressure Test Kit quickly and easily locates any malfunctioning fuel system component - fuel filters, pressure regulators, fuel lines, and fuel pumps - without removing it from the vehicle
- Large, easy to read gauge features an impact resistant rubber encased housing
- 0-100 psi, 0-700 kPa
- High quality solid brass fittings, hose, and tubing for long lasting performance and reliability
- Convenient pressure relief valve allows for safe, clean testing
- 3.5" Versatile fuel pressure gauge kit features a special expanded 1lb. increment dual dial for accurate reading, with a scale of 0-140 PSI /0-10 bar scale.
- Designed with a relief valve and 6 feet of tubing to relieve the pressure and fuel safely.
- Gauge designed with shockproof cover and hook for convenient use
- Kit comes with adapters, hoses and fittings, suitable for most cars and trucks and fuel injection systems.
- The fuel pressure gauge kit equipped with pressure release valve makes it safe and fast to use, also allows checking for sufficient fuel flow.
- Performs running, residual, rail and flow rate pressure tests
- Kit includes adapters, hoses and fittings to test fuel injection systems
- Also includes two popular adapters for import vehicles as well as a GM TBI adapter
- Professional dual scale gauge reads 0-100 PSI and 0-700 kPa with relief valve, fuel discharge hose and rubber boot
- All packaged in a professional, heavy-duty, blow molded carrying case
Last update on 2024-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-038
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Plastic Omnium
Submission Date : MAY 18, 2022
NHTSA Recall No. : 22E-038
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Plastic Omnium
Address : 2710 Bellingham Dr
Troy MI 48083
Company phone : 7347413492
Population :
Number of potentially involved : 41,409
Estimated percentage with defect : 1 %
Equipment Information :
Brand / Trade 1 : Fuel Tank Assembly
Model : FWD ORVR
Part No. : 17201 6RE0B
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : OCT 16, 2020 – MAY 21, 2021
Part 573 Safety Recall Report 22E-038 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 2 : Fuel Tank Assembly
Model : AWD
Part No. : 1700B773V
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : FEB 08, 2021 – OCT 12, 2021
Part 573 Safety Recall Report 22E-038 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 3 : Fuel Tank Assembly
Model : FWD
Part No. : 1700B771V
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : FEB 28, 2021 – OCT 12, 2021
Part 573 Safety Recall Report 22E-038 Page 4
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 4 : Fuel Tank Assembly
Model : AWD ORVR
Part No. : 17201 6RE1B
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : OCT 16, 2020 – MAY 21, 2021
Description of Defect :
Description of the Defect : As stated by Nissan and Mitsubishi in 21V957 and 22V027, due to
inappropriate manufacturing process at the supplier, the commutator
and wires in the fuel pump may not be fused correctly during production,
resulting in poor continuity. As a result, the commutator and the brushes in the
fuel pump could wear abnormally in use, causing the fuel pump to be
inoperative. If this occurs, the engine may stall while driving or cannot be
started.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : As stated by Nissan and Mitsubishi in 21V957 and 22V027, if the fuel pump
does not operate, the engine may stall while driving, which
increases risk of a crash
Description of the Cause : Reference Nissan Recall Report 21V-957
Reference Mitsubishi Recall Report 22V-027
Part 573 Safety Recall Report 22E-038 Page 5
The information contained in this report was submitted pursuant to 49 CFR §573
Identification of Any Warning
that can Occur :
Reference Nissan Recall Report 21V-957
Reference Mitsubishi Recall Report 22V 027
Involved Components :
Component Name : Fuel Pump Module
Component Description : Fuel Pump (2WD)
Component Part Number : 1760A634
Component Name : Fuel Pump Module
Component Description : Fuel Pump (4WD)
Component Part Number : 1760A631
Component Name : Fuel Pump Module
Component Description : Fuel Pump (2WD)
Component Part Number : 17040 6RE0A
Component Name : Fuel Pump Module
Component Description : Fuel Pump (4WD)
Component Part Number : 17040 6RE1A
Supplier Identification :
Component Manufacturer
Name : TI Automotive Japan Gunma Ltd.
Address : 1-23-1 Kunisadacho
Isesaki-shi Gunma-ken Foreign States 379-221
Country : Japan
Chronology :
Part 573 Safety Recall Report 22E-038 Page 6
The information contained in this report was submitted pursuant to 49 CFR §573
December 9th, 2021: Nissan North America Inc filed a Part 573 defect information report identifying a defect
in certain Nissan Rogue Vehicles. (See Recall No. 21V-957)
Feb 3rd, 2022: Mitsubishi Motors North America Inc filed a Part 573 defect information report identifying a
defect in certain Mitsubishi Outlander Vehicles. (See Recall No. 22V-027)
March – April, 2022 – NHTSA contacted Plastic Omnium in regards to the above recalls. Plastic Omnium
contacted the OEM’s in regards to the recalls and worked with NHTSA to obtain information requested.
May 1st, 2022: Based on NHTSA’s request and the two recall reports submitted by two vehicle manufacturers
Nissan and Mitsubishi, Plastic Omnium agreed to submit a defect information report under 49 CFR 573.3(f) due
to the safety-related defect determinations made by its customers, Nissan and Mitsubishi, concerning the
component from TI Automotive. Plastic Omnium’s understanding is that Nissan and Mitsubishi are working
directly with TI Automotive on any defects related to this concern.
Description of Remedy :
Description of Remedy Program : Because Nissan and Mitsubishi are recalling the subject component, any
notice, remedy, and recall-completion reporting would be completed by
the vehicle manufacturers for their respective recalls. Please refer to
Nissan Recall Report No. 21V-957 and Mitsubishi Recall Report No.
22V-027.
How Remedy Component Differs
from Recalled Component :
NR
Identify How/When Recall Condition
was Corrected in Production :
NR
Recall Schedule :
Description of Recall Schedule : Recall Schedule and notification to be managed by Nissan and Mitsubishi.
Reference Nissan Recall report 21V-957 and Mitsubishi Recall report
22V-027
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : NR – NR
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Part 573 Safety Recall Report 22E-038 Page 7
The information contained in this report was submitted pursuant to 49 CFR §573
Name : Nissan Motor Co
Address : NR
Kyushu 00
Country : JP
Company Phone : NR
Name : Mitsubishi Motors
Address : NR
00
Country : JP
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-038
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Plastic Omnium
Submission Date : MAY 13, 2022
NHTSA Recall No. : 22E-038
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Plastic Omnium
Address : 2710 Bellingham Dr
Troy MI 48083
Company phone : 7347413492
Population :
Number of potentially involved : 41,409
Estimated percentage with defect : 1 %
Equipment Information :
Brand / Trade 1 : Fuel Tank Assembly
Model : FWD ORVR
Part No. : 17201 6RE0B
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : OCT 16, 2020 – MAY 21, 2021
Part 573 Safety Recall Report 22E-038 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 2 : Fuel Tank Assembly
Model : AWD ORVR
Part No. : 17201 6RE1B
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : OCT 16, 2020 – MAY 21, 2021
Part 573 Safety Recall Report 22E-038 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 3 : Fuel Tank Assembly
Model : FWD
Part No. : 1700B771V
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : FEB 28, 2021 – OCT 12, 2021
Part 573 Safety Recall Report 22E-038 Page 4
The information contained in this report was submitted pursuant to 49 CFR §573
Brand / Trade 4 : Fuel Tank Assembly
Model : AWD
Part No. : 1700B773V
Size : NR
Function : NR
Descriptive Information : Plastic Omnium makes this submission at NHTSA’s request based on the recall of
vehicles by Nissan North America, Inc. (21V957) and Mitsubishi Motors North
America, Inc. (22V027) that were equipped with Plastic Omnium fuel systems
(P/Ns 172016RE0B, 172016RE1B, 1700B771V, and 1700B773V) that
incorporated TI Automotive fuel-pump modules (P/Ns 1760A634, 1760A6341,
17040 6RE0A, and 17040 6RE1A). As explained by Nissan and Mitsubishi, the
fuel-pump modules may have been subject to an inappropriate manufacturing
process at TI Automotive. Plastic Omnium only supplied fuel systems with the
suspect fuel-pump modules to Nissan and Mitsubishi. Each fuel system part
number is specifically designed for each OEM (Nissan/Mitsubishi) and is not
shipped to other OEM’s.
The total number of potentially affected parts specified herein is the number of
fuel systems incorporating the suspect fuel-pump modules that Plastic Omnium
supplied to the recalling vehicle manufacturers and that were manufactured
within the identified production ranges.
The information provided herein is based on information available to Plastic
Omnium at the time of the submission and may not include all information
available to the vehicle manufacturers.
Production Dates : FEB 08, 2021 – OCT 12, 2021
Description of Defect :
Description of the Defect : As stated by Nissan and Mitsubishi in 21V957 and 22V027, due to
inappropriate manufacturing process at the supplier, the commutator
and wires in the fuel pump may not be fused correctly during production,
resulting in poor continuity. As a result, the commutator and the brushes in the
fuel pump could wear abnormally in use, causing the fuel pump to be
inoperative. If this occurs, the engine may stall while driving or cannot be
started.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : As stated by Nissan and Mitsubishi in 21V957 and 22V027, if the fuel pump
does not operate, the engine may stall while driving, which
increases risk of a crash
Description of the Cause : Reference Nissan Recall Report 21V-957
Reference Mitsubishi Recall Report 22V-027
Part 573 Safety Recall Report 22E-038 Page 5
The information contained in this report was submitted pursuant to 49 CFR §573
Identification of Any Warning
that can Occur :
Reference Nissan Recall Report 21V-957
Reference Mitsubishi Recall Report 22V 027
Involved Components :
Component Name : Fuel Pump Module
Component Description : Fuel Pump (2WD)
Component Part Number : 1760A634
Component Name : Fuel Pump Module
Component Description : Fuel Pump (4WD)
Component Part Number : 1760A631
Component Name : Fuel Pump Module
Component Description : Fuel Pump (2WD)
Component Part Number : 17040 6RE0A
Component Name : Fuel Pump Module
Component Description : Fuel Pump (4WD)
Component Part Number : 17040 6RE1A
Supplier Identification :
Component Manufacturer
Name : TI Automotive Japan Gunma Ltd.
Address : 1-23-1 Kunisadacho
Isesaki-shi Gunma-ken Foreign States 379-221
Country : Japan
Chronology :
Part 573 Safety Recall Report 22E-038 Page 6
The information contained in this report was submitted pursuant to 49 CFR §573
December 9th, 2021: Nissan North America Inc filed a Part 573 defect information report identifying a defect
in certain Nissan Rogue Vehicles. (See Recall No. 21V-957)
Feb 3rd, 2022: Mitsubishi Motors North America Inc filed a Part 573 defect information report identifying a
defect in certain Mitsubishi Outlander Vehicles. (See Recall No. 22V-027)
March – April, 2022 – NHTSA contacted Plastic Omnium in regards to the above recalls. Plastic Omnium
contacted the OEM’s in regards to the recalls and worked with NHTSA to obtain information requested.
May 1st, 2022: Based on NHTSA’s request and the two recall reports submitted by two vehicle manufacturers
Nissan and Mitsubishi, Plastic Omnium agreed to submit a defect information report under 49 CFR 573.3(f) due
to the safety-related defect determinations made by its customers, Nissan and Mitsubishi, concerning the
component from TI Automotive. Plastic Omnium’s understanding is that Nissan and Mitsubishi are working
directly with TI Automotive on any defects related to this concern.
Description of Remedy :
Description of Remedy Program : Nissan and Mitsubishi will be determining remedy. Reference Nissan
Recall report 21V-957 and Mitsubishi Recall report 22V-027
How Remedy Component Differs
from Recalled Component :
NR
Identify How/When Recall Condition
was Corrected in Production :
NR
Recall Schedule :
Description of Recall Schedule : Recall Schedule and notification to be managed by Nissan and Mitsubishi.
Reference Nissan Recall report 21V-957 and Mitsubishi Recall report
22V-027
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : NR – NR
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Part 573 Safety Recall Report 22E-038 Page 7
The information contained in this report was submitted pursuant to 49 CFR §573
Name : Mitsubishi Motors
Address : NR
00
Country : JP
Company Phone : NR
Name : Nissan Motor Co
Address : NR
Kyushu 00
Country : JP
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END