“This site contains affiliate links for which OEMDTC may be compensated” |
March 30, 2022 NHTSA CAMPAIGN NUMBER: 22V205000
Reduced brake performance increases the risk of a crash.
NHTSA Campaign Number: 22V205000
Manufacturer Daimler Trucks North America, LLC
Components SERVICE BRAKES, AIR
Potential Number of Units Affected 13
Summary
Daimler Trucks North America, LLC (DTNA) is recalling certain 2023 Western Star 4900 trucks. The inversion valve air lines may have been incorrectly installed, potentially reducing brake performance.
Remedy
All vehicles have been remedied, therefore no owner notification letters are necessary. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL-924.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check for Daimler Trucks North America Recalls
There will be no publications for safety recall 22V-205.
All vehicles within this recall campaign have been repaired prior to the publication of a Dealer’s Bulletin or Owner Notification. All impacted serial numbers were inspected/repaired from 3/24/2022 – 4/13/2022.
Chronology :
On March 17, 2022, DTNA compliance was notified by the manufacturing facility regarding the inversion valve plumbing quality spill within a contained population. On March 23, 2022, as soon as DTNA had sufficient information from its investigation, and out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 4900 vehicles built within the above mentioned manufacturing date range, equipped with a certain chassis frame mounted inversion valve.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
WESTERN STAR | 4900 | 2023 |
9 Associated Documents
Defect Information Report
RMISC-22V205-6232.pdf 684.588KB
Recall Acknowledgement
RCAK-22V205-8933.pdf 645.174KB
Recall 573 Report
RCLRPT-22V205-8304.PDF 213.361KB
Letter to NHTSA – All Vehicles Remedied
RCONL-22V205-1050.pdf 288.715KB
Recall Quarterly Report #1, 2022-1
RCLQRT-22V205-2839.PDF 211.233KB
Recall Quarterly Report #2, 2022-2
RCLQRT-22V205-3731.PDF 211.233KB
Recall Quarterly Report #3, 2022-3
RCLQRT-22V205-5078.PDF 211.31KB
Manufacturer Notices(to Dealers,etc)
RCMN-22V205-0476.pdf 288.715KB
Recall Quarterly Report #4, 2022-4
RCLQRT-22V205-9909.PDF 211.419KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V205&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- high performance with low noise
- Cross References: R4709G2, 01027, 819707, 4719ES2, L3367, E10272, E-10272, A1819700, 819700, 819776, 974110, K091345, 819707, 819772, 819770, A1819700, PR4709ESII, 620-PR4709ESII
- Premium 23K Air Brake Shoes & Hardware Kit For Eaton 16-1/2" x 7" 'ES II' Extended Service Brakes
- This is the 2nd generation of Eaton Extended Service brake shoe that uses hold-down springs that attach to the shoe web. The first generation Extended Service brake shoe has anchor end hold-down springs that attach to tabs on the brake shoe table. You can use these 2nd generation brake shoes if you currently have the 1st generation on your truck as long as you use the included hardware kit
- Fits 16-1/2" x 7" Eaton 'ES II' Extended Service air brakes
- Premium 23,000 lb Brake Lining
- Cross References: E5503, E-5503, A193222D2006, 01008, M3189, TDAA3222D2006, A3222L2066, 4707D, 4707Q, L3011, A193222D200, R4707, 21855, 4707R, 4707XT, HV774707QG, XSEG24707QP
- Fits 16-1/2" Diameter x 7" Wide Meritor 'Q Plus' Quick Change Brakes
- New Brake Shoes (No Core Charge)
- Shoe FMSI Number: 4707
- Has The Plus (+) Symbol In The Brake Shoe Table
- Premium Replacement 23k Friction
- New Lined Shoes
- No Core Charge
- Hardware Included
- FMVSS 121 APPROVED
- Compatibility:LT890 can be easily installed with Eaton air brake shoe anchor springs, compatible with all Eaton air brake shoe anchor springs, universally suitable for trucks
- Durable:LT890 truck brake spring tool is made of high quality steel, which is more durable. The red protective layer on the surface prevents corrosion and prolongs the service life
- Easy Work:This truck brake spring tool can easily install the air brake shoe anchor spring. The outward handle cleverly uses the design concept of the labor-saving lever, which is easier to grasp and apply pressure
- Breakthrough:The handle part adopts a plastic sleeve, which is easier to grasp and apply pressure, allowing you to easily take it by yourself and work more easily
- Quality Service:We provide hassle-free replacement, you can buy with confidence. If you have any questions about steel truck brake spring tools, please feel free to contact us
- Premium Replacement 23k Friction
- New Lined Shoes
- No Core Charge
- Hardware Included
- FMVSS 121 APPROVED
- Premium Replacement 20k Friction
- New Lined Shoes
- No Core Charge
- Hardware Included
- FMVSS 121 APPROVED
- Reduced Stopping Distance 23K
- New Lined Shoes
- No Core Charge
- Hardware Included
- FMVSS 121 APPROVED
- Wide Compatibility: This replacement rear parking brake shoes are specifically designed for select Buick Cadillac Chevrolet GMC and Oldsmobile models, ensuring a precise fit.Replace for 781PG 781B 111.07810 110.07810 8889357430 8889357470 89027098 12472852 12477910 12477911 12482786 15817020 88935747 88967122 88982875.
- Superior Performance: Crafted with high-quality materials, these brake shoes deliver reliable and consistent braking performance, offering safety and peace of mind.
- Organic Construction: Made with organic materials, these brake shoes provide excellent stopping power while reducing noise and minimizing wear on the drums.
- Dependable Replacement: Replace your worn-out or damaged parking brake shoes with this set to restore the functionality of your braking system and maintain optimal vehicle control.
- Easy Installation: Designed for convenience, these brake shoes are easy to install and compatible with the original equipment. They come with some necessary accessories for a hassle-free installation process.
- Feature:The LT895 tool is designed to remove and replace brake spring quickly and easily without the danger of scraping or hand injuries. No need to struggling with doing brakes on a Kenworth truck or drive axle brake, works on both 7” and 9” brake shoes. The LT895 easily installs Eaton air brake shoe anchor springs.
- Durable:LT895 truck brake spring tool is made of high quality steel, which is more durable. The red protective layer on the surface prevents corrosion and prolongs the service life
- Breakthrough:The handle part adopts a plastic sleeve, which is easier to grasp and apply pressure, allowing you to easily take it by yourself and work more easily
- Easy Work:This truck brake spring tool can easily install the air brake shoe anchor spring. The outward handle cleverly uses the design concept of the labor-saving lever, which is easier to grasp and apply pressure
- Quality Service:We provide hassle-free replacement, you can buy with confidence. If you have any questions about steel truck brake spring tools, please feel free to contact us
Last update on 2024-04-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Defect Information Report (Section 573.6) FL-924 Date of Submission: March 31, 2022 Manufacturer: Daimler Trucks North America LLC P.O. BOX 3849 Portland, Oregon 97208 Type of Report: X Safety Defect Non-Compliance Vehicle Information Model Yr. Start: 2023 Model Yr. End: 2023 Make: Western Star Model: 4900 Production Dates: Begin: 02/28/2022 End: 03/08/2022 Type: Truck Descriptive Information: On a limited production run of WST 4900 vehicles built within the above manufacturing date range at a DTNA manufacturing plant, equipped with a certain chassis frame mounted inversion valve, a supply shortage led to use of a replacement valve. On vehicles with the replacement valve, production operators at the manufacturing facility may have been interchanging the brake airline that connects the control port with the one that connects the balance port. Number potentially involved: 13 Estimated percentage of involve with defect: 100% Basis for Determination of the Recall Population: vehicles known to have received the replacement valve. Defect / Noncompliance Description For this Defect/Noncompliance: Describe the defect or noncompliance: Swapped airlines at the inversion valve, which if coupled with failure points in the primary air circuit, may potentially result in reduced brake effectiveness. If a noncompliance, provide the applicable FMVSS: N/A Describe the safety risk: Reduced brake effectiveness may lead to a vehicle crash. Identify any warning, which can precede or occur: In certain cases, related to air leaks, an auditory warning and a dash telltale will alert the driver about loss of brake air pressure and diminished brake effectiveness. If applicable, identify the manufacture of the defective or noncompliant component: N/A Involved Components Component Name: Inversion Valve Plumbing Component Description: Pneumatic Valve Plumbing Component Part Number: Plumbing to BW 103081 Chronology of Defect / Noncompliance Determination Provide the chronology of events leading up to the defect decision or test data for the noncompliance decision. On March 17, 2022, DTNA compliance was notified by the manufacturing facility regarding the inversion valve plumbing quality spill within a contained population. On March 23, 2022, as soon as DTNA had sufficient information from its investigation, and out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 4900 vehicles built within the above mentioned manufacturing date range, equipped with a certain chassis frame mounted inversion valve. Identify the Remedy Describe the defect/noncompliance remedy program, including the manufacturer’s plan for reimbursement. Airlines connected to inversion valve will be inspected and repaired accordingly. Repairs will be performed by Daimler Truck North America authorized service facilities. Details of the reimbursement plan will be included in the owner’s notification letter. Identify the Recall Schedule Describe the recall schedule for notifications: Customer notification will be made by first class mail using Daimler Truck North America records to determine the customers affected. Planned Dealer Notification Begin Date: 05/29/2022 Planned Dealer Notification End Date: 05/29/2022 Planned Owner Notification Begin Date: 05/29/2022 Planned Owner Notification End Date: 05/29/2022 Manufacture’s identification code for this recall (if applicable): FL-924 DTNA Representative; Tiffani Torgeson Manager, Compliance and Regulatory Affairs
**************************************************************************************************************
Daimler Trucks North America, LLC 4747 N. Channel Avenue Portland OR 97217-7699 Phone: 503-745-8000 April 18, 2022 Michelle Rice Recall Analyst Department of Transportation National Highway Traffic Safety Administration 1200 New Jersey Avenue SE., Washington, DC 20590 Office: 202-366-1060 Subject: Western Star 4900 Inversion Valve Plumbed Backwards NHTSA NS No. 22V-205 Manufacturer number: FL-924 Ms. Rice, There will be no publications for safety recall 22V-205. All vehicles within this recall campaign have been repaired prior to the publication of a Dealer’s Bulletin or Owner Notification. All impacted serial numbers were inspected/repaired from 3/24/2022 – 4/13/2022. Please contact me if you have any questions. Sincerely, Tiffani Torgeson Executive Manager, Vehicle Safety Compliance and Regulatory Affairs Daimler Trucks North America Tiffani Torgeson Executive Manager, Vehicle Safety Compliance and Regulatory Affairs
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-205 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Daimler Trucks North America, LLC Submission Date : MAR 30, 2022 NHTSA Recall No. : 22V-205 Manufacturer Recall No. : FL-924 Manufacturer Information : Manufacturer Name : Daimler Trucks North America, LLC Address : 4747 N. Channel Avenue Portland OR 97217-3849 Company phone : 800-745-8000 Population : Number of potentially involved : 13 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2023-2023 Western Star 4900 Vehicle Type : Body Style : Power Train : NR Descriptive Information : On a limited production run of WST 4900 vehicles built within the above manufacturing date range at a DTNA manufacturing plant, equipped with a certain chassis frame mounted inversion valve, a supply shortage led to use of a replacement valve. On vehicles with the replacement valve, production operators at the manufacturing facility may have been interchanging the brake airline that connects the control port with the one that connects the balance port. Production Dates : FEB 28, 2022 – MAR 08, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Description of Defect : Description of the Defect : Swapped airlines at the inversion valve, which if coupled with failure points in the primary air circuit, may potentially result in reduced brake effectiveness. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : Reduced brake effectiveness may lead to a vehicle crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Part 573 Safety Recall Report 22V-205 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Component Name 1 : Inversion Valve Plumbing Component Description : Pneumatic Valve Plumbing Component Part Number : Plumbing to BW 103081 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : On March 17, 2022, DTNA compliance was notified by the manufacturing facility regarding the inversion valve plumbing quality spill within a contained population. On March 23, 2022, as soon as DTNA had sufficient information from its investigation, and out of abundance of caution, DTNA decided to conduct a voluntary safety recall on certain WST 4900 vehicles built within the above mentioned manufacturing date range, equipped with a certain chassis frame mounted inversion valve. Description of Remedy : Description of Remedy Program : Airlines connected to inversion valve will be inspected and repaired accordingly. Repairs will be performed by Daimler Truck North America authorized service facilities. Details of the reimbursement plan will be included in the owner’s notification letter. How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : Customer notification will be made by first class mail using Daimler Truck North America records to determine the customers affected. Planned Dealer Notification Date : MAY 29, 2022 – MAY 29, 2022 Planned Owner Notification Date : MAY 29, 2022 – MAY 29, 2022 Part 573 Safety Recall Report 22V-205 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 * NR – Not Reported
SEOCONTENT-END