“This site contains affiliate links for which OEMDTC may be compensated” |
March 22, 2022 NHTSA CAMPAIGN NUMBER: 22E024000
Broken spokes can cause wheel failure, increasing the risk of a crash.
NHTSA Campaign Number: 22E024
Manufacturer LeMans Corporation
Components WHEELS
Potential Number of Units Affected 51
Summary
LeMans Corporation (LeMans) is recalling certain Drag Specialties replacement laced motorcycle rear wheels, part number 0204-0369, and wheel size 16″ x 3.00″. Replacement wheels provided under recall 21E-054 were welded incorrectly during production, which may cause the spokes to break.
Remedy
LeMans will provide a full refund for the wheel, and any associated labor for wheel removal, free of charge. Owners who received a replacement wheel under recall 21E-054 will need to replace their wheel again. Owner notification letters were mailed April 8, 2022. Owners may contact LeMans Corporation customer service at 1-608-758-1111.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
On or about March 4, 2022, LeMans was advised that some number of spokes had broken in a Part No. 0204-0369 rear wheel that had been provided as a replacement remedy in connection with recall 21E-054. LeMans requested photos of the wheel and asked to have the wheel returned to LeMans. Shortly afterward, LeMans was informed that spokes had broken in another replacement wheel.
Upon learning of the second issue, LeMans contacted the fabricating manufacturer. On March 15, 2022, the fabricating manufacturer informed LeMans that some of the hubs of 0204 0369 wheels were welded improperly and indicated that wheels manufactured after June 1, 2021 should be recalled.
Based upon that information, LeMans decided to conduct a safety recall to address this defect.
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
DRAG SPECIALTIES | LACED MOTORCYCLE WHEEL |
15 Associated Documents
Recall Acknowledgement
Defect Notice 573 Report
RCLRPT-22E024-6294.PDF 213.731KB
Manufacturer Notices(to Dealers,etc) – dealer email
RCMN-22E024-1499.pdf 140.242KB
Manufacturer Notices(to Dealers,etc)
RCMN-22E024-7623.pdf 217.367KB
Recall 573 Report – 4/8/2022
RCLRPT-22E024-2629.PDF 213.739KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22E024-8188.pdf 149.115KB
ISSUED Owner Notification Letter(Part 577)
RCONL-22E024-3893.pdf 149.276KB
Recall 573 Report – 4/18/2022
RCLRPT-22E024-4939.PDF 213.814KB
Recall 573 Report – 5/3/2022
RCLRPT-22E024-4580.PDF 213.858KB
Recall Quarterly Report #1, 2022-2
RCLQRT-22E024-2801.PDF 211.109KB
Recall Quarterly Report #2, 2022-3
RCLQRT-22E024-5070.PDF 211.206KB
Recall Quarterly Report #3, 2022-4
RCLQRT-22E024-7862.PDF 211.293KB
Recall Quarterly Report #4, 2023-1
RCLQRT-22E024-3976.PDF 211.394KB
Recall Quarterly Report #5, 2023-2
RCLQRT-22E024-2622.PDF 211.501KB
Recall Quarterly Report #6, 2023-3
RCLQRT-22E024-2852.PDF 211.722KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22E024&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- SUPERIOR QUALITY 14G STAINLESS STEEL SPOKES FOR LONG TERM USE: These spokes are design to endure all biking conditions. They will not rust while chrome-plated steel does. They are also stronger and can resist corrosion better. Made in Europe.
- BRASS NIPPLE INCLUDED: High precision and quality nickel-plated brass nipples (silver color) are included. Nipple length : 14.6 mm
- PERFECT FOR REPLACEMENT OR BUILDING NEW WHEELS : It is suitable for 26 inch bike, 27-29 inch bike, 700c, MTB wheelset 26 inch. They also works for treking, road, city and E-bike. If you have problematic/lose spokes, then these can be used to repair. They are also great for building new wheelset for your dream bike, because you can choose your own hub and rims.
- AVAILABLE SIZE FROM 254-294 MM: The head is J-bend which mean it has 90-degree bend in the spoke head at one end, which leads it to resemble the letter J.
- WHAT SPOKE LENGTH DO I NEED: The length of spoke depends on dimension of hubs, rim and lacing pattern. You can use online spoke length calculator to determine it or simply consult with your wheel builder. For repair, you can simply remove a spoke from the wheel and measure its total length. You can use a conversion chart from inches to millimeters to order spokes.
- Enough Quantity: you will receive 216 pieces of bike spoke covers in 12 colors, including red, dark blue, light blue, dark green, light green, black, white, fluorescent, orange, purple, yellow and pink, adequate and various to meet your daily use and replacement needs
- Quality Material to Use: these spoke skins for dirt bikes are made of plastic, with high temperature resistance, reliable and lasting, not easy to fade, providing you with a nice experience
- Appropriate Size to Install: the dirt bike spoke covers measure about 24 cm/ 9.4 inches in length, lightweight and without increasing the burden to your bike; They are easy to install, you just need to measure the spoke length, and cut the spoke cover to the proper size, then open the slit on the side and press it in spoke, no glue or extra fasteners are required
- Decorative and Protective: these motocross spoke decorations can not only make your bike stylish and cool, but also effectively keep dirt and rust away from your bike spokes, to extend spokes' service life
- Widely Applicable: the plastic spoke protector is suitable for most brands and types of dirt bike, motorcycle, bicycles, mountain bike, road bike, folding bike, touring bike, kids bike, wheelchair and so on
- Package includes: 12 x 304 Stainless Steel Spokes + 12 x Nipples
- Made of high quality stainless steel, fine workmanship, environmental protection, electroplating surface, rust, corrosion resistance, long service life, durable
- Length: 260mm; Diameter: 0.2mm
- Type: 14G MTB Spoke
- Standard of spoke measurement: Distance from inner wall of elbow to top of other end
- Package includes: 12 x 14G MTB Spokes + 12 x 12mm Nipples
- Length: 290mm; Diameter: 2mm
- It is made of high-quality stainless steel, with fine workmanship, environmental protection, electroplated surface, rust prevention, corrosion resistance, long service life and durability
- Product: 14G MTB Spokes
- Spoke measurement standard: the distance from the inner wall of the elbow to the top of the other end
- Very beautiful luminous beads
- All standard bicycle spokes for any type of bicycle
- The luminous color bead is installed on the bicycle banner, which is very dazzling at night
- Easy to use, snap on,Round length 0.5"
- Package includes 108 round spoke beads
- Premium Material:Made of quality plastic, durable and not easy to deform and fade, designed with vivid color.Lightweight and portable.The bicycle spoke beads decoration would make an excellent way to decorate your bikes, and adding pleasure to your riding trip.
- Easy to Installation:Easy to snap the spoke beads on your children bicycle spokes and transform the wheels in seconds.Easy to install and remove,suitable for most standard type of bike spoke.Enough quantity and nice bicycle spoke decoration.
- Assorted Colors and Shapes:A variety of color design,simple and cute,is loved by children.The bicycle spoke beads in vivid and lively color can catch the attention easily and light up the kid's moods.Except decor your bicycle. It is not only makes you been seen safely on roads and also increases your rate of second glance when riding.
- Ideal Festival Gift:It's perfect as gifts for kids,such as children's day, Halloween, Christmas, Easter, birthday, New Year etc.Beautiful and practical decoration,make your bike more attractive and stylish.
- Wide Application:The spoke beads are both suitable for the front and back wheels of the bicycle; your kids will have the coolest bikes.Suitable for decorating bicycle and helping to cultivate child's hands-on skills.
- 12 inch Spokes have good toughness and well anti impact resistance, reduce the impact resistance of wheel.
- Fit for SSR 50cc 125cc 150cc XR CRF Chinese Dirt Pit Bike Front Or Rear 2.5-12 3.00-12 80/100-12 Wheel Rims Hub motorcycles.
- Wheel spoke kit includes enough spokes(36 pcs) to rebuild your motorcycle wheel.
- package incloud:36pcs spokes,1 pcs Inner tube protective strip
- pls check your Tire and rim size before buying ,the spoke fits Front 2.75-12 Rear 3.00-12 80/100-12 Tire Wheel and C Style Rim Hub Only
- Material: Stainless Steel, 9H hardness
- Size: Circular spoke wrench: 1.57'' x 1.57''x 0.47''; 14Model Spoke Wrench: 2'' x 1.45''x 0.53''
- Bicycle spoke wrench, must-have tool for adjusting the spokes to be tightened and correct the deformation of the rim.
- Suitable for spoke nipple sizes 10, 11, 12, 13, 14, 15.
- Portable: Small and lightweight, weighting 1.94 oz.
- Package included 108 pcs round spoke bead,Assorted Colors
- All standard bicycle spokes for any type of bicycle
- Make your bike look more special
- Easy to use, snap on,Round length 0.5"
- Great for decorating your kid's bike
Last update on 2024-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
LeMans Corporation ◼ 3501 Kennedy Road ◼ PO Box 5222 ◼ Janesville, WI 53547-5222
FAX 608/758-1144 PHONE 608/758-1111
IMPORTANT SAFETY RECALL
APRIL 2022
SAFETY RECALL NOTICE
NHTSA Recall No. 22E-024
To: Owners of Certain Drag Specialties Replacement Laced Wheels
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
LeMans Corporation, d/b/a/Drag Specialties (“LeMans”), has decided that a defect related to motor vehicle safety exists in certain Drag Specialties Replacement Laced Wheels based on information provided by the fabricating manufacturer. This notice applies to chrome, rear, 16” x 3.00” size wheels, Part No. 0204-0369, manufactured from June 1, 2021, through November 30, 2021, and shipped by LeMans to dealers after July 9, 2021. Specifically, the holes for the spokes in the hub of some these wheels are misaligned, which could cause wheel failure resulting in a crash without warning, increasing the risk of injury or death. According to dealership records, it appears that you purchased one of the covered wheels.
WHAT THE MANUFACTURER WILL DO
At this time, neither LeMans nor the fabricating manufacturer offers a wheel for this fitment that could serve as a replacement for the recalled wheels. Therefore, LeMans has concluded that the only appropriate remedy to address this defect is to provide a refund to the customer. We have instructed your dealer to reimburse you the price you paid for the wheel itself and any costs you incur in removing the defective wheel from your bike and installing a new replacement wheel.
WHAT YOU SHOULD DO
If you have a wheel covered by this recall, i.e., if you purchased and were shipped a Part No. 0204-0369 wheel after July 9, 2021, please immediately stop using the wheel.
Please contact your dealer promptly to make arrangements for:
a) Returning the wheel to the dealership. If you are not able to remove the wheel and bring it to the dealership for a refund, the dealer can make arrangements to pick up your motorcycle to remove the defective wheel, at no cost to you.
Page 2 of 2
b) Finding a replacement wheel. If the dealer does not have a replacement wheel in stock, the dealer will work with you to locate one and install it for you.
c) Obtaining a refund from the dealer once the recalled wheel has been surrendered to the dealer for return to LeMans.
If you have any questions about this recall, please contact LeMans at (800) 369-1000 (please enter Prompt #1 for “Dealer Services”) or by email at magraves@parts-unltd.com.
If you have any problems obtaining a refund, you can contact NHTSA at the address below:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
Alternatively, you may call the DOT Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153) or go to www.safercar.gov.
Please know that LeMans and Drag Specialties are committed to quality and safety, and we apologize for any inconvenience this notification may cause. We will be happy to work with you in any reasonable way that supports your satisfaction and safety.
Thank you for being a valuable Drag Specialties customer.
Mary Graves
magraves@parts-unltd.com
**************************************************************************************************************
LeMans Corporation ◼ 3501 Kennedy Road ◼ PO Box 5222 ◼ Janesville, WI 53547-5222
FAX 608/758-1144 PHONE 608/758-1111
IMPORTANT SAFETY RECALL
APRIL 2022
NHTSA Recall No. 22E-024
To: Owners of Certain Drag Specialties Replacement Laced Wheels
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. LeMans Corporation, d/b/a Drag Specialties (“LeMans”) has decided that a defect, which relates to motor vehicle safety, exists in certain Drag Specialties Replacement Laced Wheels Part No. 0204-0369 manufactured after June 1, 2021 (“New Recalled Wheels”) provided to owners affected by previous NHTSA Recall 21E-054. This decision was based on information and a recommendation provided by the fabricating manufacturer.
In June 2021, LeMans conducted a recall to address a safety defect in certain Drag Specialties Replacement Laced Wheels; specifically, chrome, rear, 16” x 3.00” size wheels, Part No. 0204-0369, manufactured from July 1, 2019, through June 1, 2021, and delivered after August 21, 2019 (“Original Recalled Wheels”). As a remedy for that defect, LeMans offered all purchasers of Original Recalled Wheels a similar replacement wheel, based on an assurance from the fabricating manufacturer that the problem that caused the defect had been corrected for all wheels manufactured after June 1, 2021.
However, LeMans recently received complaints of spokes breaking in wheels manufactured after that date. If the spokes were to break in these wheels, it could cause wheel failure resulting in a crash without warning, increasing the risk of injury or death. According to dealership records, it appears that you received a New Recalled Wheel pursuant to the earlier recall.
WHAT THE MANUFACTURER WILL DO
At this time, neither LeMans nor the fabricating manufacturer offers a wheel for this fitment that could serve as a replacement for the New Recalled Wheels. Therefore, LeMans has concluded that the only appropriate remedy to address this defect is to provide a refund to the customer. We have instructed your dealer to reimburse you the price you paid for the Original Recalled Wheel and any costs incurred in removing the defective wheel from your bike and installing a new replacement wheel.
WHAT YOU SHOULD DO
If you have a wheel covered by this recall, i.e., if you received a Part No. 0204-0369 wheel after July 9, 2021, please immediately stop using the wheel.
Page 2 of 2
Please contact your dealer promptly to make arrangements for:
a) Returning the New Recalled Wheel to the dealership. If you are not able to remove the wheel and bring it to the dealership for a refund, the dealer can make arrangements to pick up your motorcycle to remove the defective wheel, at no cost to you.
b) Finding a replacement wheel. If the dealer does not have a replacement wheel in stock, the dealer will work with you to locate one and install it for you.
c) Obtaining a refund from the dealer once the New Recalled Wheel has been surrendered to the dealer for return to LeMans.
If you have any questions about this recall, please contact LeMans at (800) 369-1000 (please enter Prompt #1 for “Dealer Services”) or by email at magraves@parts-unltd.com.
If you have any problems obtaining a refund, you can contact NHTSA at the address below:
Administrator
National Highway Traffic Safety Administration
1200 New Jersey Avenue, SE
Washington, DC 20590
Alternatively, you may call the DOT Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153) or go to www.safercar.gov.
Please know that LeMans and Drag Specialties are committed to quality and safety, and we apologize for any inconvenience this notification may cause. We will be happy to work with you in any reasonable way that supports your satisfaction and safety.
Thank you for being a valuable Drag Specialties customer.
Mary Graves
magraves@parts-unltd.com
**************************************************************************************************************
LeMans Corporation ◼ 3501 Kennedy Road ◼ PO Box 5222 ◼ Janesville, WI 53547-5222
FAX 608/758-1144 PHONE 608/758-1111
IMPORTANT SAFETY RECALL
APRIL 2022
SAFETY RECALL NOTICE TO DEALERS SELLING CERTAIN DRAG SPECIALTIES REPLACEMENT LACED WHEELS
NHTSA Recall No. 22E-024
Re: Drag Specialties Replacement Laced Wheels Chrome, Rear, 16” x 3.00” (Part No. 0204-0369)
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
REASON FOR THIS RECALL
LeMans Corporation, d/b/a Drag Specialties (“LeMans”) has decided, based on information provided by the fabricating manufacturer, that a defect related to motor vehicle safety exists in certain Drag Specialties Replacement Laced Wheels. This notice applies to chrome, rear, 16” x 3.00” size wheels, Part No. 0204-0369, manufactured from June 1, 2021, through November 30, 2021 (“Recalled Wheels”). (An earlier recall – NHTSA Recall No 21E-054 – applied to Part No. 0204-0369 wheels manufactured from July 1, 2019, through June 1, 2021). Specifically, the holes for the spokes in the hub of some of these wheels are misaligned, which could cause wheel failure resulting in a crash without warning, increasing the risk of injury or death.
WHAT LEMANS WILL DO
At this time, neither LeMans nor the fabricating manufacturer offers a wheel for this fitment that could serve as a replacement for the Recalled Wheels. Therefore, LeMans has concluded that the only appropriate remedy to address this defect – as well as the defect covered by Recall No. 21E-054 – is to provide a refund to the customer of the full purchase price that he or she paid, as well as any costs incurred in removing the defective wheel and installing a new replacement wheel. We will reimburse you the price that you paid for the wheel, as well as any removal and installation costs.
Page 2 of 3
WHAT YOU SHOULD DO
1. If you are still in possession of wheels covered by this recall, you should immediately cease all sales of these wheels and return them to LeMans. Please contact LeMans by phone at (800) 369-1000 (please enter Prompt #1 for “Dealer Services”), or by email at magraves@parts-unltd.com, for instructions on how to return the Recalled Wheels that remain in your unsold inventory.
2. LeMans has prepared a letter to be sent to all purchasers of the Recalled Wheels that notifies them of this defect and instructs them to contact a dealer to obtain a refund. We have prepared a similar letter to be sent to all customers who received one of the Recalled Wheels pursuant to Recall No. 21E-054. A copy (or copies) of the appropriate letter(s) to be sent to your customer(s) is enclosed. Please promptly send a copy of the appropriate letter to each person who purchased one of the Recalled Wheels from your dealership or received a Recalled Wheel pursuant to the prior recall, using one of the enclosed postage prepaid envelopes, and please keep a record of to whom those letters are sent. If you do not have the name and mailing address of those customers who received a Recalled Wheel from your dealership, please advise LeMans of that fact, along with the number of such unidentifiable customers, and any contact information you may have for those customers.
3. If you are contacted by the owner of a Part No. 0204-0369 motorcycle wheel who received the notification letter referred to in the previous paragraph, please do the following.
a. Please remind the owner to immediately stop riding on the Recalled Wheel.
b. Ask the owner to return the Recalled Wheel to you to obtain a refund.
c. If an owner advises you that he or she is not able to remove the wheel and/or bring it to the dealership, please make arrangements to pick up the motorcycle from the owner and have it brought to you (LeMans will reimburse you for the costs of these arrangements as well as any costs associated with the arrangements referred to in subparagraph g).
d. Remove the wheel from the customer’s motorcycle.
e. If a replacement wheel has been obtained by/for the customer, install the new wheel.
f. Refund the consumer’s purchase price.
g. After the Recalled Wheel has been replaced, make arrangements to have the motorcycle picked up by, or returned to, the owner.
Please note that the procedures set out in this paragraph also apply if you are contacted by the owner of a wheel covered by Recall No. 21E-054 that had not been replaced with a new wheel pursuant to that earlier recall.
4. If you are contacted by the owner of a Part No. 0204-0369 motorcycle wheel who did NOT receive a notification letter, but who learned of this recall in some other manner, please ask the owner when he or she purchased and received the wheel to determine whether the wheel is covered by this recall. If the owner does not know the date of purchase and receipt, please check your records to attempt to identify that date. If the wheel was shipped by LeMans after August 21, 2019, or if neither you nor the owner can confirm when the wheel was shipped by LeMans, the wheel will be considered to be covered by either this recall or Recall No. 21E-054, and you should proceed as set forth in Paragraph 3, above. However, if you determine that the wheel was shipped by LeMans
Page 3 of 3
prior to August 21, 2019, please advise the owner that the wheel is not covered by either this recall or the prior recall.
5. Please return all wheels that you remove or receive from your customer under these recalls to LeMans. Please contact LeMans by phone at (800) 369-1000 (Prompt #1), or by email at magraves@parts-unltd.com, for instructions on how to return those wheels.
6. Please also contact LeMans for instructions on how to submit a request for credit.
Please be advised that it is a violation of Federal law to sell any new or used item of motor vehicle equipment covered by this notification until the defect has been remedied.
Thank you very much for your cooperation.
Mary Graves
Dealer Services Manager
magraves@parts-unltd.com
**************************************************************************************************************
Re: IMPORTANT SAFETY RECALL
Drag Specialties Replacement Laced Wheels Chrome, Rear, 16” x 3.00” (Part No. 0204-0369)
Your Recalled Wheel Order Date: _____________________
Dear ___________________,
This email confirms our recent phone call to your dealership.
In June 2021, LeMans Corporation, d/b/a Drag Specialties (“LeMans”) conducted a recall to address a safety defect in certain Drag Specialties Replacement Laced Wheels; specifically, chrome, rear, 16” x 3.00” size wheels, Part No. 0204-0369, manufactured from July 1, 2019, through June 1, 2021, and delivered after August 21, 2019 (“Original Recalled Wheels”). As a remedy for that defect, LeMans offered all purchasers of Original Recalled Wheels a similar replacement wheel, based on an assurance from the fabricating manufacturer that the problem that caused the defect had been corrected for all wheels manufactured after June 1, 2021. However, LeMans has recently received complaints of spokes breaking in wheels manufactured after that date. Therefore, based on information and a recommendation provided by the fabricating manufacturer, LeMans has decided that a defect related to motor vehicle safety exists in the Part No. 0204-0369 wheels manufactured after June 1, 2021 (“New Recalled Wheels”). If the spokes were to break in these wheels, it could cause wheel failure resulting in a crash without warning, increasing the risk of injury or death.
Our records show you ordered one of these wheels on the above date, either as a replacement for one of the Original Recalled Wheels, or for sale to a new customer.
Please immediately do the following:
1. If you are still in possession of any of the New Recalled Wheels, you should immediately cease all sales of those wheels and return any remaining inventory to LeMans for destruction, using a prepaid UPS shipping label to be provided by LeMans. LeMans will credit your account for the full cost of such a wheel upon receipt of the wheel. Please note that it is a violation of Federal law to sell or deliver a wheel covered by this defect determination.
2. Please contact all customers to whom you have provided one or more of the New Recalled Wheels (either as a replacement for an Original Recalled Wheel or as a new sale) to immediately notify them of this defect and to ask them to not ride a motorcycle equipped with a New Recalled Wheel.
At this time, neither LeMans nor the fabricating manufacturer offers a wheel for this fitment that could serve as a replacement for the New Recalled Wheels. Therefore, LeMans has concluded that the only appropriate remedy to address this defect is to provide a refund to the customer. Owners of the New Recalled Wheels will be asked to return their wheel to their dealer to receive a refund of the full purchase price they paid for the wheel (either the price of an Original Recalled Wheel or of a New Recalled Wheel, as applicable). Dealers will be asked to return the recalled wheels to LeMans for destruction, using a prepaid UPS shipping label to be provided by LeMans. Upon receipt of the wheel,
LeMans will credit you the amount that you paid for the wheel. LeMans will also cover any labor costs to remove the recalled wheel and to install a new replacement wheel.
If the owner of a New Recalled Wheel is not able to remove the wheel and bring it to the dealership, LeMans will reimburse the cost to pick up the motorcycle from the owner and return it.
You may want to conduct research to identify alternative wheel options from other sources that you could offer the owner of a recalled wheel.
LeMans is working with NHTSA to finalize written correspondence providing formal notification of this recall to owners. After NHTSA has approved the owner notification letter, you will be sent copies of that letter for you to send to your customers. In the meantime, we ask that you do the above.
Thank you for your cooperation.
Mary Graves
Dealer Services Manager
magraves@parts-unltd.com
(800) 369-1000
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-024
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : LeMans Corporation
Submission Date : MAR 22, 2022
NHTSA Recall No. : 22E-024
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : LeMans Corporation
Address : 3501 KENNEDY RD.
JANESVILLE WI 53547
Company phone : 999
Population :
Number of potentially involved : 51
Estimated percentage with defect : 30 %
Equipment Information :
Brand / Trade 1 : Drag Specialties
Model : laced motorcycle rear wheel
Part No. : 0204-0369
Size : 16″ x 3.00″
Function : rear wheel
Descriptive Information : The recall population was determined by the fabricating manufacturer, Asia
Surge Enterprise Company Ltd., based on its production and shipping records. It
includes all Part No. 0204-0369 wheels shipped to the United States that were
not covered by Recall No. 21E-054.
Production Dates : JUN 01, 2021 – NOV 30, 2021
Description of Defect :
Description of the Defect : The spokes of the wheels can break, which can lead to failure of the wheel.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : If there is a wheel failure, it could result in a crash without warning.
Description of the Cause : The spokes were welded to the wheel hub in the wrong position.
Identification of Any Warning
that can Occur :
In some cases, spoke breakage can cause looseness or instability of the rear
wheel.
Involved Components :
Part 573 Safety Recall Report 22E-024 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Component Name : NR
Component Description : NR
Component Part Number : NR
Supplier Identification :
Component Manufacturer
Name : Asia Surge Enterprise Company Ltd.
Address : 39, Lane 392 Fu Der 1st Road
Shi-chih New Taipei City Foreign States 22150
Country : Taiwan, Province of China
Chronology :
On or about March 4, 2022, LeMans was advised that some number of spokes had broken in a Part No.
0204-0369 rear wheel that had been provided as a replacement remedy in connection with recall 21E-054.
LeMans requested photos of the wheel and asked to have the wheel returned to LeMans. Shortly afterward,
LeMans was informed that spokes had broken in another replacement wheel.
Upon learning of the second issue, LeMans contacted the fabricating manufacturer. On March 15, 2022, the
fabricating manufacturer informed LeMans that some of the hubs of 0204 0369 wheels were welded
improperly and indicated that wheels manufactured after June 1, 2021 should be recalled.
Based upon that information, LeMans decided to conduct a safety recall to address this defect.
Description of Remedy :
Description of Remedy Program : Because neither LeMans nor the fabricating manufacturer offers a wheel
that could serve as a replacement for the recalled wheels, LeMans will
offer to refund the full purchase price of the wheel, as well as any labor
costs associated with removing the wheel and/or installing a replacement
wheel obtained by the owner from another source.
How Remedy Component Differs
from Recalled Component :
Not applicable
Identify How/When Recall Condition
was Corrected in Production :
Not applicable
Part 573 Safety Recall Report 22E-024 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Recall Schedule :
Description of Recall Schedule : TBD
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : NR – NR
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-024
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : LeMans Corporation
Submission Date : APR 18, 2022
NHTSA Recall No. : 22E-024
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : LeMans Corporation
Address : 3501 KENNEDY RD.
JANESVILLE WI 53547
Company phone : 999
Population :
Number of potentially involved : 51
Estimated percentage with defect : 30 %
Equipment Information :
Brand / Trade 1 : Drag Specialties
Model : laced motorcycle rear wheel
Part No. : 0204-0369
Size : 16″ x 3.00″
Function : rear wheel
Descriptive Information : The recall population was determined by the fabricating manufacturer, Asia
Surge Enterprise Company Ltd., based on its production and shipping records. It
includes all Part No. 0204-0369 wheels shipped to the United States that were
not covered by Recall No. 21E-054.
Production Dates : JUN 01, 2021 – NOV 30, 2021
Description of Defect :
Description of the Defect : The spokes of the wheels can break, which can lead to failure of the wheel.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : If there is a wheel failure, it could result in a crash without warning.
Description of the Cause : The spokes were welded to the wheel hub in the wrong position.
Identification of Any Warning
that can Occur :
In some cases, spoke breakage can cause looseness or instability of the rear
wheel.
Involved Components :
Part 573 Safety Recall Report 22E-024 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Component Name : NA
Component Description : NA
Component Part Number : NA
Supplier Identification :
Component Manufacturer
Name : Asia Surge Enterprise Company Ltd.
Address : 39, Lane 392 Fu Der 1st Road
Shi-chih New Taipei City Foreign States 22150
Country : Taiwan, Province of China
Chronology :
On or about March 4, 2022, LeMans was advised that some number of spokes had broken in a Part No.
0204-0369 rear wheel that had been provided as a replacement remedy in connection with recall 21E-054.
LeMans requested photos of the wheel and asked to have the wheel returned to LeMans. Shortly afterward,
LeMans was informed that spokes had broken in another replacement wheel.
Upon learning of the second issue, LeMans contacted the fabricating manufacturer. On March 15, 2022, the
fabricating manufacturer informed LeMans that some of the hubs of 0204 0369 wheels were welded
improperly and indicated that wheels manufactured after June 1, 2021 should be recalled.
Based upon that information, LeMans decided to conduct a safety recall to address this defect.
Description of Remedy :
Description of Remedy Program : Because neither LeMans nor the fabricating manufacturer offers a wheel
that could serve as a replacement for the recalled wheels, LeMans will
offer to refund the full purchase price of the wheel, as well as any labor
costs associated with removing the wheel and/or installing a replacement
wheel obtained by the owner from another source.
How Remedy Component Differs
from Recalled Component :
Not applicable
Identify How/When Recall Condition
was Corrected in Production :
Not applicable
Part 573 Safety Recall Report 22E-024 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Recall Schedule :
Description of Recall Schedule : Dealer notification letters were mailed out on April 8 and the planned
owner notification is to begin approximately April 13.
Planned Dealer Notification Date : APR 08, 2022 – NR
Planned Owner Notification Date : APR 13, 2022 – NR
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-024
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : LeMans Corporation
Submission Date : MAY 03, 2022
NHTSA Recall No. : 22E-024
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : LeMans Corporation
Address : 3501 KENNEDY RD.
JANESVILLE WI 53547
Company phone : 999
Population :
Number of potentially involved : 51
Estimated percentage with defect : 30 %
Equipment Information :
Brand / Trade 1 : Drag Specialties
Model : laced motorcycle rear wheel
Part No. : 0204-0369
Size : 16″ x 3.00″
Function : rear wheel
Descriptive Information : The recall population was determined by the fabricating manufacturer, Asia
Surge Enterprise Company Ltd., based on its production and shipping records. It
includes all Part No. 0204-0369 wheels shipped to the United States that were
not covered by Recall No. 21E-054.
Production Dates : JUN 01, 2021 – NOV 30, 2021
Description of Defect :
Description of the Defect : The spokes of the wheels can break, which can lead to failure of the wheel.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : If there is a wheel failure, it could result in a crash without warning.
Description of the Cause : The spokes were welded to the wheel hub in the wrong position.
Identification of Any Warning
that can Occur :
In some cases, spoke breakage can cause looseness or instability of the rear
wheel.
Involved Components :
Part 573 Safety Recall Report 22E-024 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Component Name : Drag Specialties laced motorcycle wheel
Component Description : rear wheel, size 16″ x 3.00″
Component Part Number : 0204-0369
Supplier Identification :
Component Manufacturer
Name : Asia Surge Enterprise Company Ltd.
Address : 39, Lane 392 Fu Der 1st Road
Shi-chih New Taipei City Foreign States 22150
Country : Taiwan, Province of China
Chronology :
On or about March 4, 2022, LeMans was advised that some number of spokes had broken in a Part No.
0204-0369 rear wheel that had been provided as a replacement remedy in connection with recall 21E-054.
LeMans requested photos of the wheel and asked to have the wheel returned to LeMans. Shortly afterward,
LeMans was informed that spokes had broken in another replacement wheel.
Upon learning of the second issue, LeMans contacted the fabricating manufacturer. On March 15, 2022, the
fabricating manufacturer informed LeMans that some of the hubs of 0204 0369 wheels were welded
improperly and indicated that wheels manufactured after June 1, 2021 should be recalled.
Based upon that information, LeMans decided to conduct a safety recall to address this defect.
Description of Remedy :
Description of Remedy Program : Because neither LeMans nor the fabricating manufacturer offers a wheel
that could serve as a replacement for the recalled wheels, LeMans will
offer to refund the full purchase price of the wheel, as well as any labor
costs associated with removing the wheel and/or installing a replacement
wheel obtained by the owner from another source.
How Remedy Component Differs
from Recalled Component :
Not applicable
Identify How/When Recall Condition
was Corrected in Production :
Not applicable
Part 573 Safety Recall Report 22E-024 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Recall Schedule :
Description of Recall Schedule : Dealer notification letters were mailed out on April 8 and the planned
owner notification is to begin approximately April 13.
Planned Dealer Notification Date : APR 08, 2022 – NR
Planned Owner Notification Date : APR 13, 2022 – NR
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-024
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : LeMans Corporation
Submission Date : APR 08, 2022
NHTSA Recall No. : 22E-024
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : LeMans Corporation
Address : 3501 KENNEDY RD.
JANESVILLE WI 53547
Company phone : 999
Population :
Number of potentially involved : 51
Estimated percentage with defect : 30 %
Equipment Information :
Brand / Trade 1 : Drag Specialties
Model : laced motorcycle rear wheel
Part No. : 0204-0369
Size : 16″ x 3.00″
Function : rear wheel
Descriptive Information : The recall population was determined by the fabricating manufacturer, Asia
Surge Enterprise Company Ltd., based on its production and shipping records. It
includes all Part No. 0204-0369 wheels shipped to the United States that were
not covered by Recall No. 21E-054.
Production Dates : JUN 01, 2021 – NOV 30, 2021
Description of Defect :
Description of the Defect : The spokes of the wheels can break, which can lead to failure of the wheel.
FMVSS 1 : NR
FMVSS 2 : NR
Description of the Safety Risk : If there is a wheel failure, it could result in a crash without warning.
Description of the Cause : The spokes were welded to the wheel hub in the wrong position.
Identification of Any Warning
that can Occur :
In some cases, spoke breakage can cause looseness or instability of the rear
wheel.
Involved Components :
Part 573 Safety Recall Report 22E-024 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Component Name : NA
Component Description : NA
Component Part Number : NA
Supplier Identification :
Component Manufacturer
Name : Asia Surge Enterprise Company Ltd.
Address : 39, Lane 392 Fu Der 1st Road
Shi-chih New Taipei City Foreign States 22150
Country : Taiwan, Province of China
Chronology :
On or about March 4, 2022, LeMans was advised that some number of spokes had broken in a Part No.
0204-0369 rear wheel that had been provided as a replacement remedy in connection with recall 21E-054.
LeMans requested photos of the wheel and asked to have the wheel returned to LeMans. Shortly afterward,
LeMans was informed that spokes had broken in another replacement wheel.
Upon learning of the second issue, LeMans contacted the fabricating manufacturer. On March 15, 2022, the
fabricating manufacturer informed LeMans that some of the hubs of 0204 0369 wheels were welded
improperly and indicated that wheels manufactured after June 1, 2021 should be recalled.
Based upon that information, LeMans decided to conduct a safety recall to address this defect.
Description of Remedy :
Description of Remedy Program : Because neither LeMans nor the fabricating manufacturer offers a wheel
that could serve as a replacement for the recalled wheels, LeMans will
offer to refund the full purchase price of the wheel, as well as any labor
costs associated with removing the wheel and/or installing a replacement
wheel obtained by the owner from another source.
How Remedy Component Differs
from Recalled Component :
Not applicable
Identify How/When Recall Condition
was Corrected in Production :
Not applicable
Part 573 Safety Recall Report 22E-024 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Recall Schedule :
Description of Recall Schedule : NR
Planned Dealer Notification Date : APR 08, 2022 – NR
Planned Owner Notification Date : APR 13, 2022 – NR
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
SEOCONTENT-END