“This site contains affiliate links for which OEMDTC may be compensated” |
March 18, 2022 NHTSA CAMPAIGN NUMBER: 22E022000
Helmets May Not Protect From Impact/FMVSS 218
A helmet that does not provide adequate impact protection increases the risk of injury during a crash.
NHTSA Campaign Number: 22E022
Manufacturer Midwest Motorsports LLC
Components EQUIPMENT
Potential Number of Units Affected 738
Summary
Midwest Motorsports LLC (Midwest) is recalling certain Kylin helmets, model number K77, in sizes L, XL and XXL. The helmets may not adequately protect the wearer in the event of a head impact during a crash. As such, these helmets fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 218, “Motorcycle Helmets.”
Remedy
Midwest will notify the helmet purchasers and instruct them to return the helmets for a full refund. Owner notification letters were mailed May 5, 2022. Owners may contact Midwest customer service at 1-616-935-7443.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Midwest Motorsports 1634 Marion Ave Grand Haven, Mi 49417
IMPORTANT SAFETY RECALL NOTICE
NHTSA CAMPAIGN NUMBER: 22E-022
Notice date: May 4, 2022
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Number of Units Affected: 738
Hazard: In certain types of accidents the helmet may not provide adequate protection, increasing the risk of injury.
Recall Description: Midwest Motorsports LLC has determined that Kylin motorcycle helmets Model K77 in size L, XL and XXL manufactured in September of 2020 (“Recalled Helmets”) may fail to conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 218. Specifically, the Kylin K77 XXL helmets did not meet Section 5.2 Penetration requirements. The model, size and manufacture date will be shown on a label sewn into the liner
Midwest Motorsports requests that all customers email us at sales@midwestmotorsports.net to obtain an RMA number BEFORE returning the RECALLED HELMET. After receipt of the recalled helmet Midwest Motorsports will issue a refund for the full original retail cost.
If the recalled helmet was previously replaced due to the condition as explained in this letter the owner is entitled to a reimbursement for the cost of replacement up to the full original retail cost of the recalled helmet.
If you no longer own this helmet, please forward any information you have on the new owner to sales@midwestmotorsports.net
If Midwest Motorsports fails to issue a refund to consumers within a reasonable time you may contact the Administrator at:
National Highway Traffic Safety Administration
1200 New Jersey Avenue SE
Washington, DC 20590
or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to https://www..nhtsa.gov
Midwest Motorsports LLC
Phone 616-935-7443
sales@midwestmotorsports.net
Chronology :
In June 25, 2021 A compliance test was performed at ACT Labs and the helmet did not pass the penetration requirement
The striker contacted the surface of the test headform at the rear left location on the ambient, low temperature and high temperature samples
summary of all warranty claims — none received
field or service reports — None received
1 Affected Product
Equipment
BRAND | PART NO. | PRODUCTION DATES |
KYLIN | K77 |
10 Associated Documents
Recall Acknowledgement
RCAK-22E022-6729.pdf 775.901KB
Noncompliance Notice 573 Report
RCLRPT-22E022-8315.PDF 213.049KB
Recall 573 Report – 4/1/2022
RCLRPT-22E022-7002.PDF 213.195KB
Owner Notification Letter(Part 577)
RCONL-22E022-7719.pdf 53.767KB
Recall Quarterly Report #1, 2022-2
RCLQRT-22E022-6413.PDF 211.139KB
Recall Quarterly Report #2, 2022-3
RCLQRT-22E022-1886.PDF 211.236KB
Recall 573 Report – 10/18/22
RCLRPT-22E022-1646.PDF 213.449KB
Recall Quarterly Report #4, 2023-1
RCLQRT-22E022-5866.PDF 211.432KB
Recall Quarterly Report #5, 2023-2
RCLQRT-22E022-0473.PDF 211.54KB
Recall Quarterly Report #6, 2023-3
RCLQRT-22E022-9184.PDF 211.763KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22E022&docType=RCL
- High Resistance ABS Shell With Micrometrically Adjustable Strap
- Meets or Exceeds FMVSS-218 and DOT Safety Standards
- Helmet Liner / Cheek Pads are Lightweight, Soft and Easily Removable and Washable
- Sleek and Lightweight Design Reduces Wind Noise
- Modular Flip-Up Function Anti-Scratch, Anti-Fog and Wide View Clear Visor
- ★Meets or Exceeds FMVSS-218, DOT, and ECE-2205 Safety Standards.
- ★High-quality ABS shell with multi-Density EPS Foam inner liner.
- ★Premium lining: moisture wicking, breathable.The adjustment belt works perfectly and is well made,One-touch buckle adjustment system.
- ★Weight: 1.9 Ib,Retro German Army helmets, both men and women can use
- ★ Helmet size: It can fit your head in all sizes. M:57-58cm/22.5-22.8in,L:59-60cm/23.2-23.6in,XL:61-62cm/24-24.4in
- Boasting a compact, aerodynamic DOT shell design with sharp and aggressive styling for impeccable impact protection to excel whether short-distance street performance or long-distance touring comfort.
- Multiple conscientiously designed ventilation panels effective in streamlining the cooling process to assist with freshening the rider's experience. Large lower vent shutters for ease of use with riding gloves.
- Trendsetting springs for precise functionality ensuring a superior wind and water sealant layer. Unique 3D molded shield designed to ensure a distortion-free view throughout the entire field of vision.
- Removable Breath Guard rerouting the rider’s breath to reduce shield fogging. Inserted Chin Curtain designed to reduce wind turbulence and noise. Quick-Release Chin Strap for effortless usage.
- Fully removable, washable, and replaceable microfiber inner material that absorbs sweat without compromising comfort or security.
- DURABLE ABS MATERIAL: High-quality ABS material that provides superior protection and durability, ensuring safety during your rides.
- DUAL VISOR SYTEM: Comes with clear outer visor and built-in sunshield,easy to remove and replace.
- CONVERTIBLE DESIGN: The helmet features a convertible design, enabling seamless transitions between full-face and open face configurations, providing flexibility for different riding conditions and personal preferences.
- DETACHABLE VISOR&CHIN GUARD: Equipped with a removable visor and chin guard, this helmet offers enhanced functionality. The detachable components allow for easy customization and maintenance, enhancing your riding experience.
- COMFORT AND STYLE: Combining safety with style, High density EPS more firmer that provide good shock absorption,removable and washable liner and pad.
- ◆Classic, super-slim, open-face design with retro paint and custom graphics.
- ◆Quick Release Buckle - for easily getting on and off and holding the helmet securely on your head.
- ◆Full face motorcycle helmet, meets or exceeds DOT safety standards to ensure quality and safety, perfect for street motorcycles like cruisers.
- ◆Lightweight polycarbonate/ABS shell construction with removable/Washable interior, padded wind collar drastically reduces wind and road noise
- ◆Wicks moisture and wears like the technical fabric it is.
- Great and Beautiful UV protective finished,Light weight extremely durable
- Well vented all purpose product for summer,winter riding Main and off-road riding
- Sleek modular design,Flip up modular helmets
- Helmet Size: Large(59-60 CM,23 - 23 1/2 Inch),Hat Size :7 3/8 - 7 1/2
- Pacakge Included: 1x Helmet,1xHelmet Bag
- LEGALITY: The half motorcycle helmets comply with U.S. safety regulations and DOT FMVSS NO.218 certified
- Fashion Mask: The included fashion mask is designed to provide excellent breathability, ensuring fresh airflow while keeping out dust and debris. It allows you to breathe easily and comfortably, enhancing your overall riding comfort.
- Breathable Construction: Say goodbye to sweaty rides! This motorcycle half helmet is equipped with excellent heat dissipation structure, allowing air to circulate efficiently and preventing heat buildup. Enjoy a cool and comfortable riding experience, even on hot days.
- Lightweight and Easy to Wear: Weighing in at a lightweight, this cool helmet is designed to reduce strain, making it easy to wear for extended periods. The fine design ensures a snug fit without compromising comfort, allowing you to focus on the road ahead.
- Beautiful and Durable: Crafted with attention to detail, this skull cap half helmet boasts a beautiful finish that adds a touch of elegance to your riding gear. The high-quality ABS materials used in its construction ensure durability, providing long-lasting protection and style for your motorcycle adventures.
- Helmet shown with optional tinted shield. (Ships with clear shield only)
- Lightweight construction with a strong, durable outer shell to provide maximum protection
- NutraFog II shield which is a ClickRelease shield for fast, easy and tool-free shield replacement
- Velocity Flow Ventilation system designed to provide optimal airflow for comfortable wear
- DOT approved. Meets the FMVSS 218 Standard
- 【DLPACKJ】DLPACKJ Novel & Stylish german motorcycle helmet Design
- 【EXTREME COMFORT】 Moisture wicking fabric keeps your head cooler and more comfortable. Custom formed interior, for a super comfortable fit
- 【QUICK RELEASE】padded chin strap with quick release plastic buckle make it simple to get the helmet on and off
- 【APPLICABLE OCCASIONS】 Skull cap helmet can be used by adult men and women. It is suitable for motorcycles, scooters, street cars, mopeds, Four-wheeled vehicle.
- 【AFTER-SALE SERVICE】If the helmet size is not suitable, we provide free replacement service. Before confirming that the helmet is suitable, try to keep the packaging intact so as not to affect the exchange, thank you for your understanding
Last update on 2024-06-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
Midwest Motorsports 1634 Marion Ave Grand Haven, Mi 49417
IMPORTANT SAFETY RECALL NOTICE
NHTSA CAMPAIGN NUMBER: 22E-022
Notice date: May 4, 2022
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Number of Units Affected: 738
Hazard: In certain types of accidents the helmet may not provide adequate protection, increasing the risk of injury.
Recall Description: Midwest Motorsports LLC has determined that Kylin motorcycle helmets Model K77
in size L, XL and XXL manufactured in September of 2020 (“Recalled Helmets”) may fail to conform to
Federal Motor Vehicle Safety Standard (FMVSS) No. 218. Specifically, the Kylin K77 XXL helmets did not
meet Section 5.2 Penetration requirements. The model, size and manufacture date will be shown on a label sewn into the liner
Midwest Motorsports requests that all customers email us at sales@midwestmotorsports.net to obtain an RMA number BEFORE returning the RECALLED HELMET. After receipt of the recalled helmet Midwest Motorsports will issue a refund for the full original retail cost.
If the recalled helmet was previously replaced due to the condition as explained in this letter the owner is entitled to a reimbursement for the cost of replacement up to the full original retail cost of the recalled helmet.
If you no longer own this helmet, please forward any information you have on the new owner to sales@midwestmotorsports.net
If Midwest Motorsports fails to issue a refund to consumers within a reasonable time you may contact the Administrator at:
National Highway Traffic Safety Administration
1200 New Jersey Avenue SE
Washington, DC 20590
or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153) or go to http://www..nhtsa.gov
Midwest Motorsports LLC
Phone 616-935-7443
sales@midwestmotorsports.net
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-022
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Midwest Motorsports LLC
Submission Date : MAR 18, 2022
NHTSA Recall No. : 22E-022
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Midwest Motorsports LLC
Address : 1634 Marion Ave
Grand Haven MI 49456
Company phone : 616-935-7443
Population :
Number of potentially involved : 186
Estimated percentage with defect : 100 %
Equipment Information :
Brand / Trade 1 : Kylin
Model : K77
Part No. : K77
Size : XXL
Function : NR
Descriptive Information : This is amount of size XXL helmets in this “lot” produced in September of 2020
Production Dates : SEP 14, 2020 – SEP 28, 2020
Description of Noncompliance :
Description of the
Noncompliance :
The helmet allowed a penetration during testing
FMVSS 1 : 218 – Motorcycle helmets
FMVSS 2 : NR
Description of the Safety Risk : A penetration of the helmet could occur during an accident
Description of the Cause : NR
Identification of Any Warning
that can Occur :
None
Involved Components :
Part 573 Safety Recall Report 22E-022 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Component Name : NR
Component Description : NR
Component Part Number : NR
Supplier Identification :
Component Manufacturer
Name : YUEQING Motorcycle Fittings Co Ltd
Address : No 100 Haiqiao Rd
Niubidong Yueqing Zhejiang Foreign States 325600
Country : China
Chronology :
A test was performed in April of 2020 at ACT Labs in California
Description of Remedy :
Description of Remedy Program : These helmets cannot be repaired. All the buyers from this lot will be
informed of the recall and requested to return their helmet for a refund
How Remedy Component Differs
from Recalled Component :
NR
Identify How/When Recall Condition
was Corrected in Production :
This was the last lot of K77 helmets that we purchased.
Recall Schedule :
Description of Recall Schedule : NR
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : MAY 06, 2022 – MAY 18, 2022
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Part 573 Safety Recall Report 22E-022 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-022
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Midwest Motorsports LLC
Submission Date : APR 01, 2022
NHTSA Recall No. : 22E-022
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Midwest Motorsports LLC
Address : 1634 Marion Ave
Grand Haven MI 49456
Company phone : 616-935-7443
Population :
Number of potentially involved : 738
Estimated percentage with defect : 100 %
Equipment Information :
Brand / Trade 1 : Kylin
Model : K77
Part No. : K77
Size : L, XL & XXL
Function : NR
Descriptive Information : This is amount of size L/XLXXL helmets in this “lot” produced in September of
2020. The previous shipment (lot) with a manufacture date of 04/2020 were
tested at ACT Suzhou in size L and XXL and the helmets passed all requirements
Production Dates : SEP 14, 2020 – SEP 28, 2020
Description of Noncompliance :
Description of the
Noncompliance :
The helmet allowed a penetration during testing
FMVSS 1 : 218 – Motorcycle helmets
FMVSS 2 : NR
Description of the Safety Risk : A penetration of the helmet could occur during an accident
Description of the Cause : NR
Identification of Any Warning
that can Occur :
None
Involved Components :
Part 573 Safety Recall Report 22E-022 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Component Name : NR
Component Description : NR
Component Part Number : NR
Supplier Identification :
Component Manufacturer
Name : YUEQING Motorcycle Fittings Co Ltd
Address : No 100 Haiqiao Rd
Niubidong Yueqing Zhejiang Foreign States 325600
Country : China
Chronology :
A test was performed in April of 2020 at ACT Labs in California
Description of Remedy :
Description of Remedy Program : These helmets cannot be repaired. All the buyers from this lot will be
informed of the recall and requested to return their helmet for a refund
How Remedy Component Differs
from Recalled Component :
NR
Identify How/When Recall Condition
was Corrected in Production :
This was the last lot of K77 helmets that we purchased.
Recall Schedule :
Description of Recall Schedule : No dealers purchased this K77 helmet in size L/XL/XXL from this lot.
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : MAY 06, 2022 – MAY 18, 2022
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Part 573 Safety Recall Report 22E-022 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004
Part 573 Safety Recall Report 22E-022
The information contained in this report was submitted pursuant to 49 CFR §573
Manufacturer Name : Midwest Motorsports LLC
Submission Date : OCT 18, 2022
NHTSA Recall No. : 22E-022
Manufacturer Recall No. : NR
Manufacturer Information :
Manufacturer Name : Midwest Motorsports LLC
Address : 1634 Marion Ave
Grand Haven MI 49456
Company phone : 616-935-7443
Population :
Number of potentially involved : 738
Estimated percentage with defect : 100 %
Equipment Information :
Brand / Trade 1 : Kylin
Model : K77
Part No. : K77
Size : L, XL & XXL
Function : NR
Descriptive Information : This is amount of size L/XLXXL helmets in this “lot” produced in September of
2020. The previous shipment (lot) with a manufacture date of 04/2020 were
tested at ACT Suzhou in size L and XXL and the helmets passed all requirements
Production Dates : SEP 14, 2020 – SEP 28, 2020
Description of Noncompliance :
Description of the
Noncompliance :
The helmet allowed a penetration during testing
FMVSS 1 : 218 – Motorcycle helmets
FMVSS 2 : NR
Description of the Safety Risk : There is an increased risk of penetration of the helmet during an accident that
could cause an injury.
Description of the Cause : NR
Identification of Any Warning
that can Occur :
None
Involved Components :
Part 573 Safety Recall Report 22E-022 Page 2
The information contained in this report was submitted pursuant to 49 CFR §573
Component Name : NR
Component Description : NR
Component Part Number : NR
Supplier Identification :
Component Manufacturer
Name : YUEQING Motorcycle Fittings Co Ltd
Address : No 100 Haiqiao Rd
Niubidong Yueqing Zhejiang Foreign States 325600
Country : China
Chronology :
In June 25, 2021 A compliance test was performed at ACT Labs and the helmet did not pass the penetration
requirement
The striker contacted the surface of the test headform at the rear left location on the ambient, low
temperature and high temperature samples
summary of all warranty claims — none received
field or service reports — None received
Description of Remedy :
Description of Remedy Program : These helmets cannot be repaired. All the buyers from this lot will be
informed of the recall and requested to return their helmet for a refund
How Remedy Component Differs
from Recalled Component :
NR
Identify How/When Recall Condition
was Corrected in Production :
This was the last lot of K77 helmets that we purchased.
Recall Schedule :
Description of Recall Schedule : No dealers purchased this K77 helmet in size L/XL/XXL from this lot.
Part 573 Safety Recall Report 22E-022 Page 3
The information contained in this report was submitted pursuant to 49 CFR §573
Planned Dealer Notification Date : NR – NR
Planned Owner Notification Date : MAY 06, 2022 – MAY 18, 2022
Purchaser Information :
The following manufacturers purchased this defective/noncompliant equipment for possible use or
installation in new motor vehicles or new items of motor vehicle equipment:
Name : NR
Address : NR
NR
Country : NR
Company Phone : NR
* NR – Not Reported
SEOCONTENT-END