| “This site contains affiliate links for which OEMDTC may be compensated” |
March 17, 2022 NHTSA CAMPAIGN NUMBER: 22V166000
Bolt On Steering Column Not Tightened Properly
Loss of steering control increases the risk of a crash.
NHTSA Campaign Number: 22V166
Manufacturer Newmar Corporation
Components STEERING
Potential Number of Units Affected 58
Summary
Newmar Corporation (Newmar) is recalling certain 2021-2022 New Aire and Dutch Star motorhomes. The upper bolt connecting the steering column may not have been properly tightened, causing the nut to loosen off the bolt, potentially resulting in loss of steering control.
Remedy
Dealers will inspect and tighten the upper and lower bolts as necessary, free of charge. Owner notification letters were mailed on May 16, 2022. Owners may contact Newmar’s customer service at 1-800-731-8300.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
This notice is being sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
REASON FOR THIS RECALL
Newmar Corporation has decided that a defect, which relates to motor vehicle safety, exists in specific motorhomes built on Freightliner and Spartan Chassis.
On certain Newmar Class A motorhomes built on Freightliner and Spartan chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash.
These motorhomes require immediate service. Continued use poses a potential safety hazard.
The Safety Risk
The upper nut/bolt connecting the steering column not being torqued down correctly could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash.
WHAT WE WILL DO
Newmar Corp. will provide owners of all affected motorhomes a remedy for the potential defect at no charge for parts or labor. Units identified, as having a possible steering column issue will have the upper and lower nut/bolt checked for the correct torque as specified by the chassis manufacture installation instructions and if needed tightened to the correct torque. The total expected time for repair is .8 hrs. However, due to scheduling times the service provider may need the vehicle longer.
WHAT YOU NEED TO DO
As this defect does affect motor vehicle safety, it is recommended that you call Newmar service department immediately at 1‐800‐731‐8300. An associate will assist you in making an appointment to have this repair completed.
Federal regulations require that any vehicle lessor receiving this recall notification must forward a copy of this notice to the lessee within ten days.
If you have had the repair performed before receiving this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre‐notification remedy. For additional information, contact Newmar Corporation at:
Service Department
Newmar Corporation
355 N Delaware St
Nappanee, IN 46550‐0030
Newmar dealers are best equipped to obtain parts and provide service to ensure your vehicle is corrected as promptly as possible. HOWEVER, if you take your vehicle to your dealer on the scheduled date and this condition is not remedied on that date or within five days; please contact the Newmar Corporation Customer Service Department at 1‐800‐731‐8300. You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., SE., Washington DC 20590; or call the toll‐free Vehicle Safety Hotline at 1‐888‐327‐4236 (TTY: 1‐800‐424‐9153); or go to http://www.safercar.gov.
If you no longer own this vehicle, please furnish us the complete name and address of the person or dealership you sold or traded your vehicle to. Thank you for your cooperation.
Your safety and satisfaction with your Newmar product is important to us and we regret any inconvenience to you. Sincerely,
Newmar Corporation
NEWMAR CORPORATION · 355 N DELAWARE ST · NAPPANEE, IN 46550-0030
(800) 731-8300 · WWW.NEWMARCORP.COM
Chronology :
Newmar Corporation is reporting this recall following an initial warranty claim on 03/09/22 that initiated a safety review meeting of the issue. It was determined at the safety review meeting on 3/10/22 a recall should be issued with the initial 58 units noted in this recall. After initial filing Newmar’s manufacturing team did an additional review of the plant process of the steering column bolt installation and out of an abundance of caution the population list was updated to include additional vehicles as shown above in the vehicle information. The population list includes units built on Freightliner and Spartan Chassis.
4 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| NEWMAR | DUTCH STAR | 2021-2022 |
| NEWMAR | NEW AIRE | 2021-2022 |
11 Associated Documents
Recall Acknowledgement
RCAK-22V166-8562.pdf 645.757KB
Loading...
Reload document 
Open in new tab
Defect Notice 573 Report
RCLRPT-22V166-5224.PDF 213.849KB
Loading...
Recall 573 Report- 05/17/2022
RCLRPT-22V166-2878.PDF 217.392KB
Loading...
Recall 573 Report- 05/17/2022
RCLRPT-22V166-3330.PDF 217.392KB
Loading...
Recall Quarterly Report #1, 2022-2
RCLQRT-22V166-5227.PDF 211.126KB
Loading...
Recall Quarterly Report #2, 2022-3
RCLQRT-22V166-5239.PDF 211.225KB
Loading...
Recall Quarterly Report #3, 2022-4
RCLQRT-22V166-5647.PDF 211.309KB
Loading...
ISSUED Owner Notification Letter (Part 577)
RCONL-22V166-5153.pdf 220.845KB
Loading...
Miscellaneous Document – 573 Recall Report
RMISC-22V166-5742.pdf 215.703KB
Loading...
Miscellaneous Document – 573 Defect Information Report
RMISC-22V166-1249.pdf 217.042KB
Loading...
Miscellaneous Document – 573 Report Cover Letter
RMISC-22V166-8798.pdf 165.714KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=22V166&docType=RCL
- Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
- Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
- Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
- Accessories included: 1/2" Drive 5" long Extension Bar and 1/2" Drive to 3/8" Drive Reducer
- Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
- PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
- DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
- PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
- COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
- ±3% HIGH PRECISION AND COOL APPEARANCE: 1/2 inch drive torque wrench (10-170ft.-lb/13.6-230.5Nm)has a calibration error range of ±3%, high precision, and comes with a corresponding serial number, which is easy to trace the original data, and you can use it with confidence.Hairich torque wrench not only has superior quality but also has a superior appearance. The classic combination of black and red is fashionable and textured, allowing you to enjoy a visual feast during use.
- PREMIUM MATERIAL AND DURABLE: Experience the ultimate durability and antiskid with the torque wrench. The main body of Hairich torque wrench set is made of chrome vanadium steel alloy, which is more strong and more durable. The head of the inch-pound torque wrench adopts a ratchet design with a reversing device to improve work efficiency. The square knurled handle is made of aluminum titanium alloy, which is ergonomic and comfortable to hold for long-time use.
- DUAL SCALE AND QUICK SETTING: Laser Printed by dual-range（ft-lb and Nm). Our professional torque wrench is easy to read and provides direct unit conversion, When the set torque value is reached, the torque wrench will make an audible and felt click to remind you to stop applying force. Pull down the lock knob and hold it until the torque setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value.
- ERGONOMIC DESIGN AND POWERFUL: Every design of our industrial torque wrench conforms to ergonomic, easy to handle.72-tooth ratchet, 5° ratcheting arc head, a quick-release button for easy loading and unloading, and an aluminum non-slip handle for excellent grip and control. A recent research review that, 72-tooth ratchets are very professional tooth ratchets, you just only rotate 5 degrees to finish it. Not easy to slip and wear, can be used in small spaces, and is more durable and powerful.
- EASY OPERATION AND SAFETY: Thanks to its bidirectional drive ratchet head, our torque wrench can be measured both clockwise and counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque. Notice: At low Nm settings under 5 Nm the "click" sound can be too light to hear.
- 【High Precision&Quick Reading】: 3/8 torque wrench has high contrast and dual range scale( 5-45 Ft-Lb/6.8-61 Nm),making it clear and easy to read. We have professional torque wrench production technology, and after 20000 tests, the calibration error range of the torque wrench is ± 3%, making it an essential helper for you.
- 【Safe and Reliable Operation】: Equipped with a bidirectional drive ratchet head, torque can be measured clockwise or counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque.
- 【High Quality and Durable Material】: Made of hardened chromium vanadium steel alloy (Cr-V). At the same time, the bottom buckle tail plug adopts a red anodizing process to improve the product's oxidation resistance during use and enhance surface wear resistance. 72 tooth ratchet head, made of chromium molybdenum steel. High quality materials resist corrosion and are durable.
- 【Quick Torque Setting】: Simple and fast torque setting, pull down the locking knob and hold it down to rotate to the torque you need. Release the hand and the locking knob will automatically rebound to lock the torque value. And the designer referred to the appearance of the flashlight handle and designed a non slip and labor-saving knurled handle, making it more comfortable and easy to hold when using.
- 【Easy to Store and Widely Use】: You will receive the 3/8-inch drive click torque wrench with a sturdy plastic shell storage box, which is very delicate and durable. Torque wrench is suitable nuts and bolts on various occasions, such as bike, motorcycle, car spark, and is the best helper for you🎁. 🔔 And we provide 12 months warranty. If you have any questions, please feel free to contact us.
- 【3Pcs Torque Wrench Set】 The calibration error range is ±3%, each torque wrench has a calibration certificate. The 3-in-1 torque wrench set can meet your different needs. Including 1/4 inch 20-240in.lb, 3/8 inch 5-45ft.lb, 1/2 inch 20-160ft.lb.
- 【Safe & Reliable】 When the 1/2 torque wrench reaches the preset torque value, it makes a clear "click" sound, accompanied by an obvious hand vibration that reminds you no longer to apply force, prevent damage caused. 72-tooth reversible ratchet head, it can be used both clockwise and counterclockwise directions.
- 【Quick Release Button】 This 3/8 torque wrench has a quick release button with which accessories can easily be installed and removed, the accessories can grip and is not easy to fall down. It is more convenient to use. The torque wrench is made of CR-MO with a higher hardness.
- 【Easy to Set】First pull down the locking knob and hold it down and then start setting the desired torque value. Release the hand and the locking knob will automatically rebound to lock the torque value. If you do not use, please set the torque key to the minimal torque value.
- 【Widely Use】The torque wrenches can satisfy you in bicycle, motorcycle, car, truck and wheel screws, wheel nuts and in the device installation, electrical engineering, etc. We provide 12 months warranty. If you have any questions, please feel free to contact us.
- PORTABILITY: Torque wrench 1/2 inch drive has a durable case for portability or storage
- ADDED COMFORT: Bi-material handle for comfort and grip of the 1/2 torque wrench
- HASSLE FREE USE: Locking feature adjusts quick and easily for hassle free use
- QUICK IDENTIFICATION: Scales stamped into housing showing inch and metric torque settings
- Meets or Exceeds ASME Specifications
- 🔧【𝐌𝐢𝐥𝐢𝐭𝐚𝐫𝐲-𝐠𝐫𝐚𝐝𝐞 𝐒𝐭𝐞𝐞𝐥】ETOOLAB torque wrench utilizes military-grade steel as its base material, coupled with professional surface rust protection methods tailored to usage habits. While ensuring user comfort, it enhances product strength, wear resistance, and rust resistance. offers a more comfortable experience and a longer lifespan!
- 👍【𝐄𝐚𝐬𝐲-𝐭𝐨-𝐑𝐞𝐚𝐝】The scale of this 1/2 drive torque wrench is laser-engraved, using a black background with white markings. dinamometrica de 1/2 ensures clear and easy readability of the scale, even in sunlight. With a dual-scale design, users can conveniently read torque values in two different units according to their preferences, without the need for conversion!
- ⚙️【±𝟑% 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧 & 𝐒𝐢𝐦𝐩𝐥𝐞 𝐋𝐨𝐜𝐤𝐢𝐧𝐠 𝐑𝐢𝐧𝐠】Our torque wrench 1/2 drive meets the high precision standard of ±3% and comes with a traceable serial certificate. You can use it with confidence! Moreover, its graduation ring is tightly locked, with smaller incremental values, ensuring precise and consistent torque output even after multiple uses. This reduces the hassle of frequent adjustments. It is undoubtedly an excellent tool for your work!
- 🔊【𝐋𝐨𝐮𝐝 𝐂𝐥𝐢𝐜𝐤 𝐒𝐨𝐮𝐧𝐝】This torque wrenches has been upgraded to have a louder "Click" sound. We conducted over 25,000 tests to ensure that each product produces a click sound volume of no less than 45dB when the torque value exceeds 34 lbf·ft. When you hear the distinct click sound, it indicates that the preset torque has been reached, signaling you to stop applying force. You no longer need to worry about damaging your mechanical components.
- 💯【𝐔𝐬𝐞𝐫-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲】Our torque wrench set features a 72-tooth dual-directional ratchet head, allowing for easy operation in both clockwise and counterclockwise directions. It is designed with an adjustable locking ring, making it effortless to adjust the preset torque value. Additionally, it includes a quick-release head design, allowing it to replace the wrench head accessories more easily!
- Includes 1-pc. 3/8 in. drive torque wrench; Storage case; Product manual with torque conversion chart
- Wrench emits a click that can be heard and felt when the preset value is reached
- Permanently marked, high-contrast dual-range scale is easy to read, even in low light
- Reversible ratchet head drives in both directions and measures torque in clockwise direction
- Durable all-steel construction has no plastic parts to break or wear out
- Includes 1-pc. 1/4 in. drive micrometer torque wrench (20-200 in.-lb.) with storage case and product manual; 1-pc. 3/8 in. drive micrometer torque wrench (10-80 ft.-lb.) with storage case and product manual; 1-pc. 1/2 in. drive micrometer torque wrench (25-250 ft.-lb.) with storage case and product manual
- Wrenches emit a click that can be heard and felt when the preset value is reached
- Permanently marked, high-contrast dual-range scale is easy to read, even in low light
- Reversible ratchet heads drive in both directions and measure torque in clockwise direction
- Durable all-steel construction has no plastic parts to break or wear out
- 【PRECISION】 - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate . Before shipping, we take 200 times calibration tests to make sure all wrenches performance well .
- 【DURABLE】 - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- 【 RELIABLE & SAFE】: When small torque wrench set torque value is reached, the wrench will emits slight click sound to remind you to stop applying force to prevent overtorque damage to your items.
- 【LONG-LASTING】 - Rust & corrosion protection with our unique and newly invented Chrome finish treatment.
- 【 DUAL-DIRECTION MEASURES & WIDE USE】: The paddle of the mini torque wrench head can adjust the direction of use at any time,so that the wrench can be used both clockwise and counterclockwise directions. More widely used for Installation equipment, Electrical engineering, bicycle/motorcycle maintenance, Product assembly.With a storage box and an instruction manual.
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
NEWMAR CORPORATION NEWMARCORP.COM NEWMAR CORPORATION · 355 N DELAWARE ST · NAPPANEE, IN 46550-0030 (574) 773-7791 · FAX (574) 773-5153 · WWW.NEWMARCORP.COM Page 1 of 1 03/17/2022 VIA E‐MAIL RECEIPT CONFIRMATION REQUESTED Mr. Greg Rea Associate Administrator for Enforcement NHTSA NEF‐200, Room W45‐306 1200 New Jersey Avenue, SE Washington, DC 20590 Re: Newmar Corporation Part 573 Defect and Noncompliance Information Report Mr. Rea: Following is a compulsory ‘defect and noncompliance information report’ pursuant to 49 U.S.C. Chapter 301 and 49 CFR Part 573.6. Newmar Corporation is reporting this recall campaign concerning specific steering column upper bolt on Newmar Class A motorhomes installed on Freightliner chassis. Newmar Corp. will assume responsibility for coordinating and executing this recall, in its entirety. If you need any additional information regarding this recall campaign, please feel free to contact me at (574) 773‐7791, Ext. 3443. Sincerely, Rodney Newcomer Codes and Compliance Manager Newmar Corporation rnewcomer@newmarcorp.com
**************************************************************************************************************
NEWMAR CORPORATION NEWMARCORP.COM NEWMAR CORPORATION · 355 N DELAWARE ST · NAPPANEE, IN 46550-0030 (574) 773-7791 · FAX (574) 773-5153 · WWW.NEWMARCORP.COM Page 1 of 2 03/17/2022 Defect and Noncompliance Information Report Newmar Corporation was made aware of a potential equipment defect relating to motor vehicle safety that may exist in the vehicles listed below. Newmar Corporation is furnishing notification to the National Highway Traffic Safety Administration pursuant to 49 U.S.C. Chapter 301 and 49 CFR Part 573.6. Newmar Corporation’s campaign identification number will be assigned by NHTSA. Final Stage Vehicle Manufacturer Newmar Corporation 355 N Delaware St. Nappanee, IN 46550‐0030 Inquiries should be directed to: Sherrena Beer Consumer Affairs Newmar Corporation 355 N. Delaware St. Nappanee, IN 46550‐0030 Phone: (574) 773‐7791 Fax: (574) 773‐2007 Identification of Vehicles The vehicle models involved in this recall are: 2021, 2022 New Aire and Dutch Star Class A motorhomes. These vehicles were manufactured by Newmar Corporation between 01/15/2021 and 07/28/2021. Comprehensive Vehicle Population The total number of vehicles included in this campaign is 58. Effected Population Assessment 100% of the vehicles identified above may contain defective equipment. Page 2 of 2 Defect Description On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. Manufacturer: Newmar Corporation 355 N. Delaware St. Nappanee, IN 46550 Ph. 574‐773‐7791 Principle Event Chronology Newmar Corporation is reporting this recall following an initial warranty claim on 03/09/22 that initiated a safety review meeting of the issue. It was determined at the safety review meeting on 3/10/22 a recall should be issued with the initial 58 units noted in this recall. Newmar Corporation is not aware of any property damage, injury, or death, in vehicles manufactured by Newmar Corporation, attributed directly or indirectly to this defect. At the time of this letter Newmar Corporation has received one warranty claim for this recall. Defect Remedy Program Newmar Corporation will be conducting this recall in its entirety. Units identified as having a possible steering column issue will have the upper and lower nut/bolt checked for the correct torque and if needed tightened to the correct torque. All repairs will be at no cost to customer. If the customer has had the repair performed before receiving this letter, they may be eligible to receive reimbursement for the cost of obtaining a pre‐notification remedy. For additional information, contact Newmar Corporation at: Service Department Newmar Corporation 355 N Delaware St Nappanee, IN 46550‐0030 Distributed Notices and Other Communications None This report prepared by: Rodney Newcomer Codes and Compliance Manager Newmar Corporation
**************************************************************************************************************
NEWMAR CORPORATION NEWMARCORP.COM NEWMAR CORPORATION · 355 N DELAWARE ST · NAPPANEE, IN 46550-0030 (574) 773-7791 · FAX (574) 773-5153 · WWW.NEWMARCORP.COM Page 1 of 2 05/15/2022 Defect and Noncompliance Information Report Newmar Corporation was made aware of a potential equipment defect relating to motor vehicle safety that may exist in the vehicles listed below. Newmar Corporation is furnishing notification to the National Highway Traffic Safety Administration pursuant to 49 U.S.C. Chapter 301 and 49 CFR Part 573.6. Newmar Corporation’s campaign identification number will be assigned by NHTSA. Final Stage Vehicle Manufacturer Newmar Corporation 355 N Delaware St. Nappanee, IN 46550‐0030 Inquiries should be directed to: Sherrena Beer Consumer Affairs Newmar Corporation 355 N. Delaware St. Nappanee, IN 46550‐0030 Phone: (574) 773‐7791 Fax: (574) 773‐2007 Identification of Vehicles The vehicle models involved in this recall are: 2021, 2022 New Aire Class A motorhomes. 2021, 2022 Dutch Star Class A motorhomes. 2021, 2022 Ventana Class A motorhomes. 2021, 2022 Kountry Star Class A motorhomes. 2021, 2022 Mountain Aire Class A motorhomes. 2021, 2022 Essex Class A motorhomes. 2021, 2022 London Aire Class A motorhomes. 2021, 2022 King Aire Class A motorhomes. These vehicles were manufactured by Newmar Corporation between 01/15/2021 and 02/28/2022. Comprehensive Vehicle Population The total number of vehicles included in this campaign is 1277. Effected Population Assessment 100% of the vehicles identified above may contain defective equipment. Page 2 of 2 Defect Description On certain Newmar Class A motorhomes built on Freightliner and Spartan chassis, a problem with the uppernut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. Manufacturer: Newmar Corporation 355 N. Delaware St. Nappanee, IN 46550 Ph. 574‐773‐7791 Principle Event Chronology Newmar Corporation is reporting this recall following an initial warranty claim on 03/09/22 that initiated a safety review meeting of the issue. It was determined at the safety review meeting on 3/10/22 a recall should be issued with the initial 58 units noted in this recall. After initial filing of recall, Newmar manufacturing team reviewed the assembly plant process and determined that out of an abundance of caution an additional population of affected vehicles should be added. Newmar Corporation is not aware of any property damage, injury, or death, in vehicles manufactured by Newmar Corporation, attributed directly or indirectly to this defect. At the time of this letter Newmar Corporation has received one warranty claim for this recall. Defect Remedy Program Newmar Corporation will be conducting this recall in its entirety. Units identified as having a possible steering column issue will have the upper and lower nut/bolt checked for the correct torque and if needed tightened to the correct torque. All repairs will be at no cost to customer. If the customer has had the repair performed before receiving this letter, they may be eligible to receive reimbursement for the cost of obtaining a pre‐notification remedy. For additional information, contact Newmar Corporation at: Service Department Newmar Corporation 355 N Delaware St Nappanee, IN 46550‐0030 Distributed Notices and Other Communications None This report prepared by: Rodney Newcomer Codes and Compliance Manager Newmar Corporation
**************************************************************************************************************
NEWMAR CORPORATION . NEWMARCORP.COM NEWMAR CORPORATION · 355 N DELAWARE ST · NAPPANEE, IN 46550-0030 (800) 731-8300 · WWW.NEWMARCORP.COM P A Page 1 of 2 IMPORTANT SAFETY RECALL This notice applies to your vehicle VIN. #_______________________ Name Address City, State Zip code Date: 05/11/2022 Motor Vehicle Recall Notification ‐ Recall Campaign No. 22V‐166 Dear Valued Customer: This notice is being sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act. REASON FOR THIS RECALL Newmar Corporation has decided that a defect, which relates to motor vehicle safety, exists in specific motorhomes built on Freightliner and Spartan Chassis. On certain Newmar Class A motorhomes built on Freightliner and Spartan chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. These motorhomes require immediate service. Continued use poses a potential safety hazard. The Safety Risk The upper nut/bolt connecting the steering column not being torqued down correctly could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. WHAT WE WILL DO Newmar Corp. will provide owners of all affected motorhomes a remedy for the potential defect at no charge for parts or labor. Units identified, as having a possible steering column issue will have the upper and lower nut/bolt checked for the correct torque as specified by the chassis manufacture installation instructions and if needed tightened to the correct torque. The total expected time for repair is .8 hrs. However, due to scheduling times the service provider may need the vehicle longer. WHAT YOU NEED TO DO As this defect does affect motor vehicle safety, it is recommended that you call Newmar service department immediately at 1‐800‐731‐8300. An associate will assist you in making an appointment to have this repair completed. Federal regulations require that any vehicle lessor receiving this recall notification must forward a copy of this notice to the lessee within ten days. If you have had the repair performed before receiving this letter, you may be eligible to receive reimbursement for the cost of obtaining a pre‐notification remedy. For additional information, contact Newmar Corporation at: Service Department Newmar Corporation 355 N Delaware St Nappanee, IN 46550‐0030 NEWMAR CORPORATION · 355 N DELAWARE ST · NAPPANEE, IN 46550-0030 (574) 773-7791 · Fax (574)773-5153 · WWW.NEWMARCORP.COM P A Page 2 of 2 Newmar dealers are best equipped to obtain parts and provide service to ensure your vehicle is corrected as promptly as possible. HOWEVER, if you take your vehicle to your dealer on the scheduled date and this condition is not remedied on that date or within five days; please contact the Newmar Corporation Customer Service Department at 1‐800‐731‐8300. You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., SE., Washington DC 20590; or call the toll‐free Vehicle Safety Hotline at 1‐888‐327‐4236 (TTY: 1‐800‐424‐9153); or go to http://www.safercar.gov. If you no longer own this vehicle, please furnish us the complete name and address of the person or dealership you sold or traded your vehicle to. Thank you for your cooperation. Your safety and satisfaction with your Newmar product is important to us and we regret any inconvenience to you. Sincerely, Newmar Corporation
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-166 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Newmar Corporation Submission Date : MAR 17, 2022 NHTSA Recall No. : 22V-166 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Newmar Corporation Address : 355 North Delaware Street PO Box 30 Nappanee IN 46550 Company phone : 574-773-7791 Population : Number of potentially involved : 58 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2022 Newmar New Aire Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. New Aire = 13 Production Dates : JAN 15, 2021 – JUL 28, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2021-2022 Newmar Dutch Star Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. Dutch Star = 45 Production Dates : JAN 15, 2021 – JUL 28, 2021 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-166 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Defect : Description of the Defect : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Component Name 1 : Steering Column Upper Bolt/Nut Component Description : Bolt/Nut Component Part Number : NR Supplier Identification : Component Manufacturer Name : Daimler Trucks North America, LLC Address : PO Box 3849 Portland Oregon 972208 Country : United States Chronology : Newmar Corporation is reporting this recall following an initial warranty claim on 03/09/22 that initiated a safety review meeting of the issue. It was determined at the safety review meeting on 3/10/22 a recall should Part 573 Safety Recall Report 22V-166 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 be issued with the initial 58 units noted in this recall. Description of Remedy : Description of Remedy Program : Newmar Corporation will be conducting this recall in its entirety. Units identified as having a possible steering column issue will have the upper and lower nut/bolt checked for the correct torque and if needed tightened to the correct torque. All repairs will be at no cost to customer. If the customer has had the repair performed before receiving this letter, they may be eligible to receive reimbursement for the cost of obtaining a prenotification remedy. For additional information contact Newmar Service Department, 355 N. Delaware St, Nappanee, IN 46550 How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : On or before 05/16/2022, customer/dealer letters will be sent out. Planned Dealer Notification Date : MAY 16, 2022 – MAY 16, 2022 Planned Owner Notification Date : MAY 16, 2022 – MAY 16, 2022 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 22V-166 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Newmar Corporation Submission Date : MAY 17, 2022 NHTSA Recall No. : 22V-166 Manufacturer Recall No. : NR Manufacturer Information : Manufacturer Name : Newmar Corporation Address : 355 North Delaware Street PO Box 30 Nappanee IN 46550 Company phone : 574-773-7791 Population : Number of potentially involved : 1,277 Estimated percentage with defect : 100 % Vehicle Information : Vehicle 1 : 2021-2022 Newmar New Aire Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. New Aire = 152 Production Dates : JAN 15, 2021 – FEB 28, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 2 : 2021-2022 Newmar Dutch Star Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. Dutch Star = 493 Production Dates : JAN 15, 2021 – FEB 28, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-166 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 3 : 2021-2022 Newmar Ventana Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. Ventana=300 Production Dates : JAN 15, 2021 – FEB 28, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 4 : 2021-2022 Newmar London Aire Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. London Aire=75 Production Dates : JAN 15, 2021 – FEB 28, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 5 : 2021-2022 Newmar King Aire Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. King Aire=29 Production Dates : JAN 15, 2021 – FEB 28, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-166 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Vehicle 6 : 2021-2022 Newmar Kountry Star Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. Kountry Star=142 Production Dates : JAN 15, 2021 – FEB 28, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 7 : 2021-2022 Newmar Essex Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. Exxex=33 Production Dates : JAN 15, 2021 – FEB 28, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Vehicle 8 : 2021-2022 Newmar Mountain Aire Vehicle Type : BUSES, MEDIUM & HEAVY VEHICLES Body Style : OTHER Power Train : DIESEL Descriptive Information : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. Mountain Aire=53 Production Dates : JAN 15, 2021 – FEB 28, 2022 VIN Range 1 : Begin : NR End : NR Not sequential Part 573 Safety Recall Report 22V-166 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 Description of Defect : Description of the Defect : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : On certain Newmar Class A motorhomes built on Freightliner chassis, a problem with the upper nut/bolt connecting the steering column not being torqued down correctly which could result in the nut coming loose and falling off the bolt. This could result in the loss of steering control and increase the risk of a crash. Description of the Cause : NR Identification of Any Warning that can Occur : NR Involved Components : Component Name 1 : Steering Column Upper Bolt/Nut Component Description : Bolt/Nut Component Part Number : NR Supplier Identification : Component Manufacturer Name : Freightliner Address : NR NR Country : United States Chronology : Newmar Corporation is reporting this recall following an initial warranty claim on 03/09/22 that initiated a safety review meeting of the issue. It was determined at the safety review meeting on 3/10/22 a recall should be issued with the initial 58 units noted in this recall. After initial filing Newmar’s manufacturing team did an Part 573 Safety Recall Report 22V-166 Page 5 The information contained in this report was submitted pursuant to 49 CFR §573 additional review of the plant process of the steering column bolt installation and out of an abundance of caution the population list was updated to include additional vehicles as shown above in the vehicle information. The population list includes units built on Freightliner and Spartan Chassis. Description of Remedy : Description of Remedy Program : Newmar Corporation will be conducting this recall in its entirety. Units identified as having a possible steering column issue will have the upper and lower nut/bolt checked for the correct torque and if needed tightened to the correct torque. All repairs will be at no cost to customer. If the customer has had the repair performed before receiving this letter, they may be eligible to receive reimbursement for the cost of obtaining a prenotification remedy. For additional information contact Newmar Service Department, 355 N. Delaware St, Nappanee, IN 46550 How Remedy Component Differs from Recalled Component : NR Identify How/When Recall Condition was Corrected in Production : NR Recall Schedule : Description of Recall Schedule : On or before 05/16/2022, customer/dealer letters will be sent out. Planned Dealer Notification Date : MAY 16, 2022 – MAY 16, 2022 Planned Owner Notification Date : MAY 16, 2022 – MAY 16, 2022 * NR – Not Reported
SEOCONTENT-END