“This site contains affiliate links for which OEMDTC may be compensated” |
November 5, 2021 NHTSA CAMPAIGN NUMBER: 21V865000
A lack of acceleration can increase the risk of a crash.
NHTSA Campaign Number: 21V865
Manufacturer Yamaha Motor Corporation, USA
Components ENGINE AND ENGINE COOLING
Potential Number of Units Affected 2,462
Summary
Yamaha Motor Corporation, USA (Yamaha) is recalling certain 2016-2021 FJR13 motorcycles. The Engine Control Unit (ECU) programming installed under Recall 20V-813 (990141), that was designed to prevent gear damage, may prevent the engine from accelerating as intended.
Remedy
Owners are advised not to ride their motorcycles until they are repaired. Dealers will reprogram the ECU, free of charge. Motorcycles that were previously repaired under recall 20V-813 will need to return for the new remedy. Owner notification letters were mailed November 30, 2021. Owners may contact Yamaha customer service at 1-800-962-7926. Yamaha’s number for this recall is 990152.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
M2021-010R
11/30/2021
CERTAIN 2016~2021 MODEL FJR1300A, FJR1300AE, AND FJR1300PA MOTORCYCLES
FACTORY MODIFICATION CAMPAIGN – Rev-Limit Condition Under Specific Shifting Operation
INTRODUCTION
Yamaha Motor Corporation, U.S.A. has decided that a defect that relates to motor vehicle safety exists in certain 2016~2021 model FJR1300A, FJR1300AE, and FJR1300PA motorcycles.
In affected motorcycles, when the rider is shifting into second gear under certain conditions, such as if the throttle is applied before the clutch is fully engaged, causing unusually high rpm, the Engine Control Unit (ECU) will react by limiting the maximum engine speed available. This is due to rev-limiter programming intended to protect second gear components from abnormal stress. However, this rev-limiter programming may be overly restrictive, possibly preventing the acceleration performance the rider anticipates, increasing the risk of a crash.
To correct this defect, Yamaha is initiating a Factory Modification Campaign. Affected units must have the ECU reflashed with the updated programing that Yamaha has tested to provide a slightly improved calibration while still providing second gear protection.
Yamaha is notifying all registered owners of affected motorcycles by mail. A copy of our letter is included in this bulletin. The customer should take the letter along with the affected motorcycle to an authorized Yamaha dealer for modification.
If your dealership was invoiced for one or more affected units, a computer report listing all affected motorcycles invoiced to your dealership is included with a mailed copy of this bulletin. Use the list to help ensure all motorcycles are modified. All sold motorcycles that have been registered with Yamaha will show the customer’s name and address.
Your dealership must notify the owner of any affected motorcycle that was actually sold but listed as “unsold” in the report. You must modify all affected motorcycles in your inventory as well as all customer-owned motorcycles brought to you for this service. Any affected motorcycle that you purchase from Yamaha in the future may also require modification. If you purchase a motorcycle from another dealer or Yamaha, check to see if the procedures in this bulletin have already been performed before you sell the motorcycle.
Motorcycles that are affected should not be operated until they are modified. It is a violation of Yamaha policy for your dealership to deliver any affected motorcycle to customers until the procedures in this bulletin are performed.
When the modification on each motorcycle is performed, follow the Warranty Information section of this bulletin to receive reimbursement. Be sure to use the Factory Modification Campaign procedures in Chapter 7 of the Warranty and Y.E.S. Handbook P/N: (LIT-11760-00-21).
AFFECTED RANGE
Check Unit Status on YDS to make sure the Primary ID (PID) is in the Affected Range and is eligible for this repair. The affected unit ranges for this issue are:
Model Year | Model | Model Code | Primary ID | ||
Prefix | From | To | |||
2016 | FJR1300A | B883 | RP29E | 0000002 | 0000822 |
2018 | B88E | ||||
2019 | B88J | ||||
2016 | B884 | RP29Y | 0000002 | 0000151 | |
2018 | B88F | ||||
2019 | B88K | ||||
2016 | FJR1300AE | B963 | RP30E | 0000001 | 0001165 |
2017 | B967 | ||||
2018 | B96D | ||||
2019 | B96H | ||||
2020 | B96M | ||||
2021 | B96T | ||||
2016 | B964 | RP30Y | 0000006 | 0000242 | |
2017 | B968 | ||||
2018 | B96E | ||||
2019 | B96J | ||||
2020 | B96N | ||||
2021 | B96U | ||||
2018 | FJR1300PA | B9R1 | RP31Y | 0000003 | 0000092 |
2020 | B9R3 |
SERVICE PROCEDURES
Reflash the ECU with the corresponding software update using YDT version 3.1.14 or above (earlier versions will not have access to the portal which has the reprogram file). The previously published ECU reprogramming file has been superseded to the latest program.
NOTE:
- Make sure the battery is well-charged or connect a battery charger if necessary. Otherwise the reprogramming process may be halted and not completed.
- The ECU program cannot be rewritten back to the previous program.
- After finishing the reprogramming, error code P0606 will remain in the ECU’s malfunction history. There is no trouble on the unit; therefore, please erase this malfunction code using YDT.
- ECU reprogramming DOES NOT alter any emissions certification settings.
Model | Model Code | ECU Part Number | Software Number | Software Ver. | File No. |
FJR1300A, FJR1300PA | B883 | B88-8591A-10 | Before: 12208040
After: 12208201 |
Before: 00
After: ↑ |
202110_B883_01.rpf |
B884 | |||||
B88E | B88-8591A-50 | Before: 12208140
After: 12208201 |
Before: 00
After: ↑ |
||
B88F | |||||
B88J | B88-8591A-51 | Before: 12208140
After: 12208201 |
Before: 00
After: ↑ |
||
B88K | |||||
B9R1 | B88-8591A-80 | Before: 12208200
After: 12208201 |
Before: 00
After: ↑ |
||
B9R3 | |||||
FJR1300AE (US) | B963 | B96-8591A-10 | Before: 12246040
After: 12246201 |
Before: 00
After: ↑ |
202110_B963_01.rpf |
B964 | |||||
B967 | |||||
B968 | B96-8591A-50 | Before: 12246040
After: 12246201 |
Before: 00
After: ↑ |
||
B96D | |||||
B96E | |||||
B96H | B96-8591A-51 | Before: 12246040
After: 12246201 |
Before: 00
After: ↑ |
||
B96J | |||||
B96M | |||||
B96N | B96-8591A-80 | Before: 12246200
After: 12246201 |
Before: 00
After: ↑ |
||
B96T | |||||
B96U |
After reprogramming the ECU, confirm the software version number as shown to the right. Refer to the software version number list shown in the table on page 3.
Chronology :
November 2021, Yamaha Motor corporation USA was informed by the manufacturer, Yamaha Motor Co., LTD that such a condition could exist in previously modified units. This was determined pursuant to quality control review, testing and a review of foreign models that use substantially similar part design.
Units previously modified under campaign 20V813, product previously reworked by the factory prior to sale will only be subject to ECU reprogramming.
6 Affected Products
Vehicle
MAKE | MODEL | YEAR |
YAMAHA | FJR13 | 2016-2021 |
10 Associated Documents
Recall 573 Report-Amendment 1
RCLRPT-21V865-9472.PDF 217.506KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V865-4244.pdf 175.094KB
Defect Notice 573 Report
RCLRPT-21V865-3787.PDF 216.645KB
Recall Acknowledgement
Recall Quarterly Report #1, 2021-4
RCLQRT-21V865-2265.PDF 211.136KB
Remedy Instructions and TSB
RCRIT-21V865-0449.pdf 856.338KB
Recall 573 Report-Amendment 2
RCLRPT-21V865-7694.PDF 217.687KB
Recall Quarterly Report #2, 2022-1
RCLQRT-21V865-2070.PDF 211.233KB
Recall Quarterly Report #3, 2022-2
RCLQRT-21V865-2266.PDF 211.317KB
Recall Quarterly Report #4, 2022-3
RCLQRT-21V865-9599.PDF 211.417KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V865&docType=RCL
- 🏍️【System Diagnosis Features】The Motocycle diagnostic tool Support engine / ABS / Tire pressure / Anti-theft and other systems, It can quickly read and clear diagnostic trouble codes, view freeze frame, display data stream and do active tests, get vehicle information, You are allowed to perform a complete and deep detection for your motorcycles, rather than send it directly to repair shop, very suitable for diyers.
- 🏍️【Easy To Use】 Code Readers Scan Tools is a handheld motorcycle diagnostic tool for mainstream motorcycle brands and can help technicians diagnose problems faster and make repairs. This tool has functions such as voltage detection, multi-language selection, and unit switching. It has a clear interface and is easy to operate. It is a good helper for motorcycle maintenance.
- 🏍️【Wide Compatibility】Motorcycle Fault Code Readers support the diagnosis of Asian, European and American multi-brand motorcycles, M3-A is suitable for motorcycles of Yamaha, Honda, Kawasaki and OBD2, Supports 11 languages, You can switch the language you need anytime.
- 🏍️【Portable and Convenient】The motorcycle diagnostic requires no Internet connection or setup, and with a lightweight body that can be operated with one hand, you can take it anywhere and use it very conveniently.
- 🏍️【Free Software Upgrade】Connect the device to the computer and wait for the device to be recognized by the computer. After the recognition is successful, a new drive symbol will appear on the computer. Open this and replace the “DIAGNOSE" folder in the drive with the downloaded “DIAGNOSE" upgrade folder, and then power on again. The updated files can be obtained by contacting the customer service.
- 🏍️【Easy To Use】M6 Motorcycle Diagnostic Tool is a handheld motorcycle diagnostic tool for mainstream motorcycle brands and can help technicians diagnose problems faster and make repairs. This tool has functions such as voltage detection, multi-language selection, and unit switching. It has a clear interface and is easy to operate. It is a good helper for motorcycle maintenance.
- 🏍️【104 Service Functions Supported】M6 Motorcycle Diagnostic Tool supports up to 104 service functions that allow technicians to perform factory service procedures such as Oil maintenance lamp reset, ECU reset, making injection adjustments (CO Trimmer), adjusting the throttle valve position sensor (TPS), re-setting auto adaptive parameters, and re-setting the service light, and making idling adjustments.
- 🏍️【Wide Compatibility】support the diagnosis of Asian, European and American multi-brand motorcycles, Supports 11 languages, You can switch the language you need anytime.
- 🏍️【System Diagnosis Features】The Motocycle diagnostic tool Support engine / ABS / Tire pressure / Anti-theft and other systems, It can quickly read and clear diagnostic trouble codes, view freeze frame, display data stream and do active tests, get vehicle information, You are allowed to perform a complete and deep detection for your motorcycles, rather than send it directly to repair shop, very suitable for diyers.
- 🏍️【Read Data Steam】The data stream waveform graph automatically adapts to the data without the need for manual adjustment of amplitude and allows for viewing of specific data streams rather than displaying all data streams at once. It comes equipped with features such as a printer, image viewer, data logging and playback, battery testing, charge detection, error reporting and feedback, and more.
- 🚴🏻【Intelligent dual systemmotorbike tester】 Motorbike Diagnosis + Battery Analysis.
- 🚴🏻【Product Features】 Multi-purpose machine, can be used for motorbike testing,battery testing, car testing, etc.
- 🚴🏻【Signal Simulator】Can simulate crank signals, PWM signals, injector signals, ignition signals.
- 🚴🏻【Support wifi online upgrade】Built-in 2.4G high-speed transmission wif moduleonline cloud service automatic upgrade, convenient and fast.
- 🚴🏻【Supports 13 different languages】English, Chinese Traditional, Spanish, French, Cambodian, Thai, Chinese Turkish.Vietnamese, Indonesian, Portuguese, Japanese, Korean, German.
- 👍【Multifunctional Motorcycle Diagnostic Tool】MT500 PRO is an advanced motorcycle diagnostic tablet developed by ANCEL specifically for motorcycle enthusiasts. Bright 5" touchscreen & Android 5.1.1 OS & 8 Languages; Auto VIN & Scan; Online remote assistance and solve problems, One-click WIFI update; Full systems diagnosis for most popular motorcycle models; 30+ Resets like oil service reset, abs bleeding, etc.
- ✅【Wider Motorcycle Coverage Than Others】 Compare with other similar motorcycle scan tool, MT500PRO added more popular motorcycle brands, it' not only compatible with Harley Yamaha Honda Indian Polaris BRP Victory diagnosis.Newly upgraded in 2023 with the addition of two more popular brands fit for Kawasaki Suzuki diagnosis. Plug and play, easy to use
- ✅ [Manufacturer-level Diagnostic] MT500 PRO is a all-system motorcycle diagnostic tool. It can read and clear trouble codes and turn off the CEL when a check engine light comes on. Besides, it can also scan all the available electronic control modules of your motorcycle including Engine, ABS, TPMS, Suspensions, Ignition, EPS, Service system, Meter system, etc. to read/clear fault codes, and view live data.You can quickly and accurately find existing or potential problems, saving time and money
- ✅ [Excluisive Advance Functions, Save Costs For You] MT500 PRO diagnostic tool with almost all daily maintenance services that necessary advanced functions for most motorcycle to meet the market trends and needs. Auto scan, auto VIN recognition, control module programming and coding, ECU setting, instrument coding, maintenance light reset, CO adjustment, idle speed adjustment, A/F value reset, ABS control unit setting etc. Help you solve all kinds of complex maintenance problems easily
- ✅The ANCEL MT500PRO scanner diagnostic tool providing real-time data display for quick and accurate diagnostics. With its user-friendly touch screen interface, the Moto 100 OBD2 code reader allows for easy navigation and interpretation of the data streams. Whether you are a professional mechanic or a motorcycle enthusiast, this code reader is a valuable tool for troubleshooting and maintaining your motorcycle’s performance
- 💯OBDPROG MOTO 100 Diagnostic Scan Tool Compatible with a wide range of Harley Davidson motorcycles, including Touring, Dyna, Softail, Sportster, Touring CVO, and VRSC V-Rod and more.
- 💯OBDPROG MOTO 100 Diagnostic Scan Tool Compatible with Polaris motorcycles, including RANGER, ATV, Snow, RZR, Slingshot, Commercial, LEV, ACE, General, and Generic and more.
- 🍻[Compatible with over 1000 models and makes] For Indian motorcycles (Chieftain, Scout, Scout Sixty, Scout Bobber, Springfield, and more), For BRP motorcycles (Commander, DS, Defender, Maverick, Outlander, Renegade, Traxter, Spyder, Adventure, Boondocker, and more), For Victory motorcycles (Vision, High-Ball, Cross Country, Cross Roads, and more), For Yamaha motorcycles, and Honda motorcycles. Equipped with a 5.0-inch touch screen and offers easy WiFi updates during the first year at no additional cost. After the first year, a yearly software fee of $80 is applicable.
- 🍻[Clear The Check Engine Light Yourself] Provides full system motorcycle obd2 diagnostic, component reset, and relearn functions for these motorcycles. Can retrieve and clear fault codes from the motorcycle's ECU, and analyze information from ABS, Engine, Transmission, Power Steering, and Meter systems.
- 🍻[Monitor your Bike’s Health] Provides multiple displays of live data, including text, graphics, and gauges, allowing motorcycle owners to monitor oil temperature, pressure, transmission temperature, engine speed, engine coolant temperature, and short-term fuel trim.
- 【Topdiag M100 pro Hand-Held Operation】: Jdiag m100 pro motorcycle scanner is hand-held operation, easy to use, simplo and flexible, fast troubleshooting.
- 【Topdiag M100 Pro Widely Used For Motorcycle Repair】:Suitable for motorcycle maintenance technicians andpersonal vehicle maintenance and repair.
- 【Multiple Battery Test Methods】Jdiag m100 pro motorcycle scanner: Multiple test methods for more professional testing of car batteries.
- 【Support Multi-languages】:English,Traditional Chinese, Viotnamese, Indonesian, Thai, Spain;Turkey, Portugel, French, Khmer.
- 【Jdiag m100 pro motorcycle scanner support Motorcycle list】: Hartford, Aeon, Honda, SYM, Yamaha,Suzuki,Kymco,Kawasaki,Piaggio,PGO,KTM, etc
- Fits 2001-2014 Harley Davidson Fuel Injected models with the 4 pin connector (check detailed compatibility list below).
- Converts 4 pin to 16 pin OBD2 connection for use with your J1850 capable OBD2 scanners or readers.
- Compatible with RPMitUP and Harley Droid App.
- Built to last quality cable and moulded plug. 1 feet. See B09VSYV478 for the 6 pin CAN BUS version.
- With the appropriate OBD2 device and software (not included), you can read and erase error codes, view live data like RPM, Horsepower, Torque, Engine temperature etc.
- [Full System Diagnostics] M200 professional scan tool it can request information from motorcycle or send commands to the autocycle modules. It allows the technician to perform factory service procedures such as✅ABS system test✅Freezing data✅Actuator testing✅DTC enquiry✅Clean the injectors✅Troubleshooting✅CO idle speed adjustment✅Adjusting the throttle valve position sensor(TPS)
- [17+ Services] M200 Scanner Diagnostic Tool is designed for home mechanics and workshops, garages. Support almost all the most popular functions of motorcycles, including Engine, ABS, TPMS, Suspensions, Ignition, EPS, Traction control, Radio, LED headlight. Battery detection, Start test, Charging test, Relay test, etc. Help you handle all kinds of complex maintenance problems easily.
- [With Print Function] The tester is equipped with a built-in printer that can generate printed test reports. These reports typically include the battery test results, including voltage, CCA, SOC, and any additional measurements or diagnostic information. The printed report serves as documentation and can be used for reference or for sharing the results with customers or technicians.
- [Battery Tester] Allows you to assess motorcycle battery health and performance.Voltage measurement, include load testing, charging test, start test. By performing a battery test using a motorcycle diagnostic tool, you can identify any battery-related problems early on and take appropriate action.
- [M200 Works With Your Motorcycle] The M200 is capable of accurately monitoring and diagnosing problems on over 14 different makes of motorcycle. This includes AEON, Apprilia, Benelli, Hartford, Honda, Kawasaki, Kymco, Piaggio, PGO, Suzuki, Sym, Vespa, Yamaha.etc., and is a good choice for motorcycle repair shops, and home mechanics.
- 🔥【2022 MOST Worth Buying Motorcycle Diagnostic Tool】MT500 PLUS is an advanced motorcycle diagnostic tablet developed by ANCEL specifically for motorcycle enthusiasts.🥇Bright 5" touchscreen & Android 5.1.1 OS & 8 Languages;🥇Auto VIN & Scan;🥇Online remote assistance and solve problems, One-click WIFI update;🥇Full systems diagnosis for almost of all EU motorcycle models, such as BMW/Yamaha/KTM/Triumph/Ducati, etc.;🥇30+ Resets;✅1-Year Free Update (Value $200);✅9 extra adapter cables (Value $300)
- 【Wider Coverage for Motorcycles】Most motorcycle scanners on the market are mainly fit for BMW. For the convenience of owners who own different motorcycles, we specially added DUCATI, KTM, TRIUMPH, YAMAHA, HONDA, SUZUKI, KAWASAKI. not only that, it also covers scooters, side-by-side motorcycles, snowmobiles, ATVs, etc. It is easy to plug and play. What's more, considering the different interfaces, it is specially equipped with 9 adapter cables (worth over $300), no need to spend extra money to buy
- Fit for BMW/Yamaha/DUCATI/TRIUMPH】For BMW motorcycles, it supports serial C/F/G/H/K/R/S, year 1996 onward. For Yamaha motorcycles, it supports serial A/B/C/D/F/G/M/N/R/S/T/V/W/X/Y/Z, year 2003 onward. For DUCATI motorcycle, it supports serial 1/7/8/9/D/G/H/M/P/S/X, year 1998 onward. For TRIUMPH motorcycle, it supports serial A/B/D/R/S/T, year 1997 onward. Please confirm compatibility via email, message or Q&A before ordering
- 【Manufacturer-level Diagnostic for Motorbike】MT500 PLUS supported do a dealer-level and comprehensive diagnosis for all electronics control modules of your motorcycles, including Engine, ABS, TPMS, Suspensions, Ignition, EPS, Traction control, Radio, LED headlight, Service system, Meter system. It can read and clear fault codes, allows you to easily diagnose engine problems and turn off the warning light. It makes your easily know the car situation and check the problems
- 【30+ Special Service Functions】MT500 PLUS motorbike scan tool covers almost all commonly used resets, such as TPS reset, Oil Reset, ABS Brake Bleeding, EPB Service, ECU reset, instrument coding, CO adjustment, idle speed adjustment, A/F value reset, windshield adjustment, etc. Helping motorcycle users save money and time in maintenance or repair, at least $300/YEAR
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
SEOCONTENT-START
©2021 YAMAHA MOTOR CORPORATION, U.S.A. MOTORCYCLE 11/30/2021 M2021-010R SAFETY RECALL This modification has top priority. This bulletin must be performed immediately to ensure customer safety. NOTE: Bulletins that announce a recall will have an “R” at the end of the bulletin number. CERTAIN 2016~2021 MODEL FJR1300A, FJR1300AE, AND FJR1300PA MOTORCYCLES FACTORY MODIFICATION CAMPAIGN – Rev-Limit Condition Under Specific Shifting Operation Yamaha Motor Corporation, U.S.A. has decided that a defect that relates to motor vehicle safety exists in certain 2016~2021 model FJR1300A, FJR1300AE, and FJR1300PA motorcycles. In affected motorcycles, when the rider is shifting into second gear under certain conditions, such as if the throttle is applied before the clutch is fully engaged, causing unusually high rpm, the Engine Control Unit (ECU) will react by limiting the maximum engine speed available. This is due to rev-limiter programming intended to protect second gear components from abnormal stress. However, this rev-limiter programming may be overly restrictive, possibly preventing the acceleration performance the rider anticipates, increasing the risk of a crash. To correct this defect, Yamaha is initiating a Factory Modification Campaign. Affected units must have the ECU reflashed with the updated programing that Yamaha has tested to provide a slightly improved calibration while still providing second gear protection. Yamaha is notifying all registered owners of affected motorcycles by mail. A copy of our letter is included in this bulletin. The customer should take the letter along with the affected motorcycle to an authorized Yamaha dealer for modification. If your dealership was invoiced for one or more affected units, a computer report listing all affected motorcycles invoiced to your dealership is included with a mailed copy of this bulletin. Use the list to help ensure all motorcycles are modified. All sold motorcycles that have been registered with Yamaha will show the customer’s name and address. Your dealership must notify the owner of any affected motorcycle that was actually sold but listed as “unsold” in the report. You must modify all affected motorcycles in your inventory as well as all customer-owned motorcycles brought to you for this service. Any affected motorcycle that you purchase from Yamaha in the future may also require modification. If you purchase a motorcycle from another dealer or Yamaha, check to see if the procedures in this bulletin have already been performed before you sell the motorcycle. Motorcycles that are affected should not be operated until they are modified. It is a violation of Yamaha policy for your dealership to deliver any affected motorcycle to customers until the procedures in this bulletin are performed. Page 1 of 5 IN I i I INTRODUCTION When the modification on each motorcycle is performed, follow the Warranty Information section of this bulletin to receive reimbursement. Be sure to use the Factory Modification Campaign procedures in Chapter 7 of the Warranty and Y.E.S. Handbook P/N: (LIT-11760-00-21). Unsold & Sold Units: Use YDS Unit Status to check to be sure the unit is affected and that it is not already modified. If the unit is affected, reflash the ECU with the new software update. Parts Required: No. Warranty: Factory Modification Campaign. See the Warranty Information section of this bulletin. This modification applies to all affected units regardless of ownership or warranty status. Notify Customers: Yes, you must immediately contact any customer whose FJR1300 shows as unregistered on the report enclosed with the mailed copy of this bulletin. Yamaha has sent letters to customers whose motorcycles were registered with Yamaha as of 11/29/2021. Check Unit Status on YDS to make sure the Primary ID (PID) is in the Affected Range and is eligible for this repair. The affected unit ranges for this issue are: Model Year Model Model Code Primary ID Prefix From To 2016 FJR1300A B883 2018 B88E RP29E 0000002 0000822 2019 B88J 2016 B884 2018 B88F RP29Y 0000002 0000151 2019 B88K 2016 FJR1300AE B963 RP30E 0000001 0001165 2017 B967 2018 B96D 2019 B96H 2020 B96M 2021 B96T 2016 B964 RP30Y 0000006 0000242 2017 B968 2018 B96E 2019 B96J 2020 B96N 2021 B96U 2018 FJR1300PA B9R1 RP31Y 0000003 0000092 2020 B9R3 IMPORTANT: Affected Primary IDs may not be consecutive. Always check YDS Unit Status before starting any repair. Page 2 of 5 l.b~ I DEALER ACTION SUMMARY l”‘I AFFECTED RANGE Reflash the ECU with the corresponding software update using YDT version 3.1.14 or above (earlier versions will not have access to the portal which has the reprogram file). The previously published ECU reprogramming file has been superseded to the latest program. NOTE: • Make sure the battery is well-charged or connect a battery charger if necessary. Otherwise the reprogramming process may be halted and not completed. • The ECU program cannot be rewritten back to the previous program. • After finishing the reprogramming, error code P0606 will remain in the ECU’s malfunction history. There is no trouble on the unit; therefore, please erase this malfunction code using YDT. • ECU reprogramming DOES NOT alter any emissions certification settings. Model Model Code ECU Part Number Software Number Software Ver. File No. FJR1300A, FJR1300PA B883 B88-8591A-10 Before: 12208040 After: 12208201 Before: 00 After: ↑ 202110_ B883_01.rpf B884 B88E B88-8591A-50 Before: 12208140 After: 12208201 Before: 00 B88F After: ↑ B88J B88-8591A-51 Before: 12208140 After: 12208201 Before: 00 B88K After: ↑ B9R1 B88-8591A-80 Before: 12208200 After: 12208201 Before: 00 B9R3 After: ↑ FJR1300AE (US) B963 B96-8591A-10 Before: 12246040 After: 12246201 Before: 00 After: ↑ 202110_ B963_01.rpf B964 B967 B968 B96-8591A-50 Before: 12246040 After: 12246201 Before: 00 B96D After: ↑ B96E B96H B96-8591A-51 Before: 12246040 After: 12246201 Before: 00 B96J After: ↑ B96M B96N B96-8591A-80 Before: 12246200 After: 12246201 Before: 00 B96T After: ↑ B96U Page 3 of 5 I~ I SERVICE PROCEDURES Page 4 of 5 After reprogramming the ECU, confirm the software version number as shown to the right. Refer to the software version number list shown in the table on page 3. After completing the procedure, make sure to properly record and submit the warranty claim for this campaign to ensure correct reimbursement and to update the vehicle’s repair history in Yamaha’s database. Refer to the chart on page 3 if you encounter an unfamiliar unit and want to confirm that the ECU programming is the current version. The owner of each registered vehicle will receive a letter announcing this campaign. The customer’s letter includes the Vehicle Identification Number and Recall Number. The modification is authorized for all affected motorcycles, both sold and unsold, regardless of ownership or warranty status. You do not need the customer’s letter to perform the inspection/modification or to file for reimbursement. Submit a Recall Claim as described below using Campaign Number 990152. The labor allowance is 0.3 hours. To submit your Recall Claim on YDS, go to Service > Warranty Claims / Authorization > Claims / Authorization > New. Then, from the menu, select Recall / Service per Bulletin. v If you have any questions about proper procedures for Factory Modification Campaigns, see Chapter 7 in your Warranty and Y.E.S. Handbook (LIT-11760-00-21). ENTER CAMPAIGN CODE (990152) HERE Sample ~~ IDENTIFICATION PROCEDURE l~I WARRANTY INFORMATION WdHewa.im / Au1horiution Io -m•- •-•-.,= @-•-.– I o …… __ _ o_, __ _ ca.pp-.~————–~. oo~———-0 ____ ., .. _ . __ oo————- YAMAHA DIAGNOSTIC TOOL t – X ( Select funct on Choose Reprogram File Reprogram £CU JYARP31Y6LA000071FJR1300PAB 159Km –111 1.. 0 Rem11in 1ime 00:00 R.sult Succffd~ 11 / 19/ 202116:0S (S)Forbidd•n•c.tionsduring reprogramming •Execute theotherappliu!ion · Unplug the cable Add New Claim / Autho rization Unit Recall/ Service Campaign Primal’J’IO: ~ {OR)VINJHI N:i_l ‘1’inishDate:,–il—, EHIEH■■ !Mi I iii iiM 202110 8883 01.rpf ltir!MI ECUhardwar,!senalnumber VIN/PIO ECUh1rdw1r,!number £CU5oftw.,•num!nr ECUsoftwarevers,onnumber ECUmodelcode Adapterlnterf.Jcesen.Jlnumber Reprogram date Protocol version lMESt wwwam FFFFFfFF fFFfFFFF JYARP31Y6LA00007I JYARP31Y6LA000071 FFFFFFFF FFFfFFFF l 122os2oo l – 1 ,22os201 I 00 00 888) 888) 37018788 1B012011 20210304 20211119 ()(010001 OC01000I ,v software a start ver1hcat1on reprogr<1m Prima”J’IO Finish Date Page 5 of 5 IMPORTANT SAFETY RECALL This notice applies to your motorcycle, VIN xxxxxxxxxxxxxxxxx November 30, 2021 990152 Dear Yamaha Owner: Yamaha Motor Corporation, U.S.A. has decided that a defect that relates to motor vehicle safety exists in 2016~2021 model FJR1300A, FJR1300AE, and FJR1300PA motorcycles. Our records indicate that you own the affected vehicle shown above. The reason for this recall: In affected motorcycles, when the rider is shifting into second gear under certain conditions, such as if the throttle is applied before the clutch is fully engaged, causing unusually high rpm, the Engine Control Unit (ECU) will react by limiting the maximum engine speed available. This is due to rev-limiter programming intended to protect second gear components from abnormal stress. However, this rev-limiter programming may be overly restrictive, possibly preventing the acceleration performance the rider anticipates, increasing the risk of a crash. What Yamaha and your dealer will do: Your authorized Yamaha dealer will have the ECU reflashed with updated programming Yamaha has tested to provide a slightly improved calibration while still providing second gear protection. There will be no charge to you for this procedure. What you should do now: Please call your Yamaha dealer to make a service appointment to have this procedure performed. At that same time, you can find out how long they expect to keep your vehicle for this service. Remember to take this letter with you when you take in your vehicle. You should not operate your affected motorcycle, shown above, other than to take it to a dealer, until this inspection and, if necessary, modification is performed. If you are unable to return to the Yamaha dealer who sold you the vehicle, this service will be performed by any authorized Yamaha Motorcycle dealer. For the name of a dealer near you, call 1-800-88-YAMAHA or visit the Yamaha web site at www.yamaha-motor.com. If you have had this repair performed before you received this letter, you may be entitled to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this repair. For more information, contact Yamaha Customer Relations at 1-800-962-7926. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within 10 days. If you need help: If, after contacting your dealership, you have questions or concerns which the dealership is unable to answer, please write to: Yamaha Motor Corporation, U.S.A. Customer Relations Department P.O. Box 6555 Cypress, CA 90630 Or call: 1-800-962-7926 If, after contacting Yamaha Customer Relations, you are still not satisfied that we have done our best to remedy the situation without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Auto Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http: //www.safercar.gov. Refer to NHTSA recall number 21V-865. If you no longer own this Yamaha: If you have sold your FJR1300 to another party, please call us toll-free at 1-800-962-7926 with the name and address of the new owner, along with the Vehicle Identification Number (VIN) shown above your name on this letter. We’re sorry to cause you any inconvenience, but we are sincerely concerned about your safety and continued satisfaction with our products. Thank you for giving your attention to this important matter. Sincerely, Motorsports Service Support Yamaha Motor Corporation, U.S.A. Model: OYAMAHA YAMAHA MOTOR CORPORATION, U.S.A. 6555 Katella Avenue, Cypress, CA 90630-5101 800-962-7926
**************************************************************************************************************
Page 5 of 5 IMPORTANT SAFETY RECALL This notice applies to your motorcycle, VIN xxxxxxxxxxxxxxxxx November 30, 2021 990152 Dear Yamaha Owner: Yamaha Motor Corporation, U.S.A. has decided that a defect that relates to motor vehicle safety exists in 2016~2021 model FJR1300A, FJR1300AE, and FJR1300PA motorcycles. Our records indicate that you own the affected vehicle shown above. The reason for this recall: In affected motorcycles, when the rider is shifting into second gear under certain conditions, such as if the throttle is applied before the clutch is fully engaged, causing unusually high rpm, the Engine Control Unit (ECU) will react by limiting the maximum engine speed available. This is due to rev-limiter programming intended to protect second gear components from abnormal stress. However, this rev-limiter programming may be overly restrictive, possibly preventing the acceleration performance the rider anticipates, increasing the risk of a crash. What Yamaha and your dealer will do: Your authorized Yamaha dealer will have the ECU reflashed with updated programming Yamaha has tested to provide a slightly improved calibration while still providing second gear protection. There will be no charge to you for this procedure. What you should do now: Please call your Yamaha dealer to make a service appointment to have this procedure performed. At that same time, you can find out how long they expect to keep your vehicle for this service. Remember to take this letter with you when you take in your vehicle. You should not operate your affected motorcycle, shown above, other than to take it to a dealer, until this inspection and, if necessary, modification is performed. If you are unable to return to the Yamaha dealer who sold you the vehicle, this service will be performed by any authorized Yamaha Motorcycle dealer. For the name of a dealer near you, call 1-800-88-YAMAHA or visit the Yamaha web site at www.yamaha-motor.com. If you have had this repair performed before you received this letter, you may be entitled to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this repair. For more information, contact Yamaha Customer Relations at 1-800-962-7926. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within 10 days. If you need help: If, after contacting your dealership, you have questions or concerns which the dealership is unable to answer, please write to: Yamaha Motor Corporation, U.S.A. Customer Relations Department P.O. Box 6555 Cypress, CA 90630 Or call: 1-800-962-7926 If, after contacting Yamaha Customer Relations, you are still not satisfied that we have done our best to remedy the situation without charge and within a reasonable time, you may submit a written complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the Auto Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153); or go to http: //www.safercar.gov. Refer to NHTSA recall number 21V-865. If you no longer own this Yamaha: If you have sold your FJR1300 to another party, please call us toll-free at 1-800-962-7926 with the name and address of the new owner, along with the Vehicle Identification Number (VIN) shown above your name on this letter. We’re sorry to cause you any inconvenience, but we are sincerely concerned about your safety and continued satisfaction with our products. Thank you for giving your attention to this important matter. Sincerely, Motorsports Service Support Yamaha Motor Corporation, U.S.A. Model:
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 21V-865 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Yamaha Motor Corporation, USA Submission Date : NOV 30, 2021 NHTSA Recall No. : 21V-865 Manufacturer Recall No. : 990152 Manufacturer Information : Manufacturer Name : Yamaha Motor Corporation, USA Address : 6555 Katella Avenue Cypress CA 90630-5101 Company phone : 800-962-7926 Population : Number of potentially involved : 2,462 Estimated percentage with defect : 5 % Vehicle Information : Vehicle 1 : 2016-2021 Yamaha FJR13 Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : In affected motorcycles, when the rider is shifting into second gear under certain conditions, such as if the throttle is applied before the clutch is fully engaged, causing unusually high rpm, the Engine Control Unit (ECU) will react by limiting the maximum engine speed available. This is due to rev-limiter programming intended to protect second gear components from abnormal stress. However, this rev-limiter programming may be overly restrictive, possibly preventing the acceleration performance the rider anticipates, increasing the risk of a crash. Production Dates : DEC 01, 2015 – AUG 31, 2021 VIN Range 1 : Begin : JYARP29E6GA000002 End : JYARP29EXKA000822 ✔ Not sequential VIN Range 2 : Begin : JYARP29Y3GA000002 End : JYARP29Y8KA000151 ✔ Not sequential VIN Range 3 : Begin : JYARP30E0GA000001 End : JYARP30E8MA001165 ✔ Not sequential VIN Range 4 : Begin : JYARP30Y7GA000006 End : JYARP30Y3MA000242 ✔ Not sequential VIN Range 5 : Begin : JYARP31Y4JA000003 End : JYARP31Y3LA000092 ✔ Not sequential Description of Defect : Description of the Defect : In certain affected motorcycles, when the rider is shifting into second gear under certain conditions, such as if the throttle is applied before the clutch is fully engaged, causing unusually high rpm, the Engine Control Unit (ECU) will react by limiting the maximum engine speed available. This is due to revlimiter programming intended to protect second gear components from abnormal stress. However, this rev-limiter programming may be overly restrictive, possibly preventing the acceleration performance the rider anticipates Part 573 Safety Recall Report 21V-865 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The side of second gear may not be strong enough to handle high speed loads. As a result, cracks may occur due to constant stress applied during repeated gear shift operation and, eventually, the gear could break. If this happens, the transmission and, in turn, the rear wheel, could lock Description of the Cause : when the rider is shifting into second gear under certain conditions, such as if the throttle is applied before the clutch is fully engaged, causing unusually high rpm, the Engine Control Unit (ECU) will react by limiting the maximum engine speed available. This is due to rev-limiter programming intended to protect second gear components from abnormal stress. However, this rev-limiter programming may be overly restrictive, possibly preventing the acceleration performance the rider anticipates Identification of Any Warning that can Occur : In unmodified units, the ridder may experience difficulty shifting, finding neutral and false neutrals may occur prior to gear breakage. Customers are urged not to operate the affected motorcycle until inspection and or modification is performed Involved Components : Component Name 1 : ECU Component Description : Electronic Control Unit Component Part Number : B96-8591A-10 Component Name 2 : ECU Component Description : Electronic Control Unit Component Part Number : B96-8591A-50 Component Name 3 : ECU Component Description : Electronic Control Unit Component Part Number : B96-8591A-51 Component Name 4 : ECU Component Description : Electronic Control Unit Component Part Number : B96-8591A-80 Part 573 Safety Recall Report 21V-865 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : November 2021, Yamaha Motor corporation USA was informed by the manufacturer, Yamaha Motor Co., LTD that such a condition could exist in previously modified units. This was determined pursuant to quality control review, testing and a review of foreign models that use substantially similar part design. Units previously modified under campaign 20V813, product previously reworked by the factory prior to sale will only be subject to ECU reprogramming. Description of Remedy : Description of Remedy Program : Affected units must have the main axle and drive axle assemblies replaced with the stronger parts and the Engine Control Unit (ECU) reprogrammed to prevent excessive rpm leading to second gear damage. Units previously modified under campaign 20V813, product previously reworked by the factory prior to sale will only be subject to ECU reprogramming. How Remedy Component Differs from Recalled Component : Second pinion gear is now forged and 2nd pinion on the main axel and 1st and 5th wheel gear on the drive axle have a small identification groove machined on them to aid identification Identify How/When Recall Condition was Corrected in Production : With the start of September 2021 production, the new style forged 2nd pinion gear on the main transmission axel and 1st and 5th wheel gear on the drive transmission axel are and revised ECU programming are used for engine/transmission assembly and unit production Recall Schedule : Description of Recall Schedule : We anticipate commencing dealer/consumer notification shortly after the owner’s notification letter is approved by NHTSA, the affected VIN range is ascertained, and the Technical Bulletin’s service procedures are confirmed and finalized by Yamaha staff. assuming the Agency can review and approve the customer notification letter within 5 days of receipt (perhaps December 3rd we will have the letter and technical bulletin printed. Normal turnaround time is 3 working days for such a printing. Hence the materials will be ready for mailing approximately December Part 573 Safety Recall Report 21V-865 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 9th. Final copies of these notification documents will be forwarded to the Agency as soon as possible. Planned Dealer Notification Date : DEC 09, 2021 – DEC 10, 2021 Planned Owner Notification Date : DEC 09, 2021 – DEC 10, 2021 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 21V-865 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Yamaha Motor Corporation, USA Submission Date : JAN 07, 2022 NHTSA Recall No. : 21V-865 Manufacturer Recall No. : 990152 Manufacturer Information : Manufacturer Name : Yamaha Motor Corporation, USA Address : 6555 Katella Avenue Cypress CA 90630-5101 Company phone : 800-962-7926 Population : Number of potentially involved : 2,462 Estimated percentage with defect : 5 % Vehicle Information : Vehicle 1 : 2016-2021 Yamaha FJR13 Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : In affected motorcycles, when the rider is shifting into second gear under certain conditions, such as if the throttle is applied before the clutch is fully engaged, causing unusually high rpm, the Engine Control Unit (ECU) will react by limiting the maximum engine speed available. This is due to rev-limiter programming intended to protect second gear components from abnormal stress. However, this rev-limiter programming may be overly restrictive, possibly preventing the acceleration performance the rider anticipates, increasing the risk of a crash. Production Dates : DEC 01, 2015 – AUG 31, 2021 VIN Range 1 : Begin : JYARP29E6GA000002 End : JYARP29EXKA000822 ✔ Not sequential VIN Range 2 : Begin : JYARP29Y3GA000002 End : JYARP29Y8KA000151 ✔ Not sequential VIN Range 3 : Begin : JYARP30E0GA000001 End : JYARP30E8MA001165 ✔ Not sequential VIN Range 4 : Begin : JYARP30Y7GA000006 End : JYARP30Y3MA000242 ✔ Not sequential VIN Range 5 : Begin : JYARP31Y4JA000003 End : JYARP31Y3LA000092 ✔ Not sequential Description of Defect : Description of the Defect : In certain affected motorcycles, when the rider is shifting into second gear under certain conditions, such as if the throttle is applied before the clutch is fully engaged, causing unusually high rpm, the Engine Control Unit (ECU) will react by limiting the maximum engine speed available. This is due to revlimiter programming intended to protect second gear components from abnormal stress. However, this rev-limiter programming may be overly restrictive, possibly preventing the acceleration performance the rider anticipates Part 573 Safety Recall Report 21V-865 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 FMVSS 1 : NR FMVSS 2 : NR Description of the Safety Risk : The side of second gear may not be strong enough to handle high speed loads. As a result, cracks may occur due to constant stress applied during repeated gear shift operation and, eventually, the gear could break. If this happens, the transmission and, in turn, the rear wheel, could lock Description of the Cause : when the rider is shifting into second gear under certain conditions, such as if the throttle is applied before the clutch is fully engaged, causing unusually high rpm, the Engine Control Unit (ECU) will react by limiting the maximum engine speed available. This is due to rev-limiter programming intended to protect second gear components from abnormal stress. However, this rev-limiter programming may be overly restrictive, possibly preventing the acceleration performance the rider anticipates Identification of Any Warning that can Occur : In unmodified units, the ridder may experience difficulty shifting, finding neutral and false neutrals may occur prior to gear breakage. Customers are urged not to operate the affected motorcycle until inspection and or modification is performed Involved Components : Component Name 1 : ECU Component Description : Electronic Control Unit Component Part Number : B96-8591A-10 Component Name 2 : ECU Component Description : Electronic Control Unit Component Part Number : B96-8591A-50 Component Name 3 : ECU Component Description : Electronic Control Unit Component Part Number : B96-8591A-51 Component Name 4 : ECU Component Description : Electronic Control Unit Component Part Number : B96-8591A-80 Part 573 Safety Recall Report 21V-865 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Supplier Identification : Component Manufacturer Name : NR Address : NR NR Country : NR Chronology : November 2021, Yamaha Motor corporation USA was informed by the manufacturer, Yamaha Motor Co., LTD that such a condition could exist in previously modified units. This was determined pursuant to quality control review, testing and a review of foreign models that use substantially similar part design. Units previously modified under campaign 20V813, product previously reworked by the factory prior to sale will only be subject to ECU reprogramming. Description of Remedy : Description of Remedy Program : Affected units must have the main axle and drive axle assemblies replaced with the stronger parts and the Engine Control Unit (ECU) reprogrammed to prevent excessive rpm leading to second gear damage. Units previously modified under campaign 20V813, product previously reworked by the factory prior to sale will only be subject to ECU reprogramming. If customers have already had and paid for this repair to be performed, may be entitled to receive reimbursement for the cost of obtaining a prenotification remedy of the problem associated with this repair. For more information, contact Yamaha Customer Relations at 1-866-894-1626. How Remedy Component Differs from Recalled Component : Second pinion gear is now forged and 2nd pinion on the main axel and 1st and 5th wheel gear on the drive axle have a small identification groove machined on them to aid identification Identify How/When Recall Condition was Corrected in Production : With the start of September 2021 production, the new style forged 2nd pinion gear on the main transmission axel and 1st and 5th wheel gear on the drive transmission axel are and revised ECU programming are used for engine/transmission assembly and unit production Recall Schedule : Description of Recall Schedule : We anticipate commencing dealer/consumer notification shortly after Part 573 Safety Recall Report 21V-865 Page 4 The information contained in this report was submitted pursuant to 49 CFR §573 the owner’s notification letter is approved by NHTSA, the affected VIN range is ascertained, and the Technical Bulletin’s service procedures are confirmed and finalized by Yamaha staff. assuming the Agency can review and approve the customer notification letter within 5 days of receipt (perhaps December 3rd we will have the letter and technical bulletin printed. Normal turnaround time is 3 working days for such a printing. Hence the materials will be ready for mailing approximately December 9th. Final copies of these notification documents will be forwarded to the Agency as soon as possible. Planned Dealer Notification Date : DEC 09, 2021 – DEC 10, 2021 Planned Owner Notification Date : DEC 09, 2021 – DEC 10, 2021 * NR – Not Reported
**************************************************************************************************************
OMB Control No.: 2127-0004 Part 573 Safety Recall Report 21V-865 The information contained in this report was submitted pursuant to 49 CFR §573 Manufacturer Name : Yamaha Motor Corporation, USA Submission Date : NOV 05, 2021 NHTSA Recall No. : 21V-865 Manufacturer Recall No. : 990152 Manufacturer Information : Manufacturer Name : Yamaha Motor Corporation, USA Address : 6555 Katella Avenue Cypress CA 90630-5101 Company phone : 800-962-7926 Population : Number of potentially involved : 2,462 Estimated percentage with defect : 5 % Vehicle Information : Vehicle 1 : 2016-2020 Yamaha FJR13 Vehicle Type : MOTORCYCLES Body Style : OTHER Power Train : GAS Descriptive Information : In previously modified units, under specific usage environment, the changes in the performance characteristics created by the ECU modification did not meet certain customers’ usage requirements such as when performing high-rpm half-clutch startoffs in 1st gear and when excessively operating the throttle while using the clutch. Yamaha has performed extensive additional testing and verification and ascertained that the revised performance characteristics can be reprogramed back into the ECU and maintain the integrity of the transmission and the previous repair campaign Production Dates : DEC 01, 2015 – JUL 16, 2021 VIN Range 1 : Begin : JYARP29E6GA000002 End : JYARP29EXKA000822 ✔ Not sequential VIN Range 2 : Begin : JYARP29Y3GA000002 End : JYARP29Y8KA000151 Not sequential VIN Range 3 : Begin : JYARP30E0GA000001 End : JYARP30E8MA001165 Not sequential VIN Range 4 : Begin : JYARP30Y7GA000006 End : JYARP30Y3MA000242 Not sequential VIN Range 5 : Begin : JYARP31Y4JA000003 End : JYARP31Y3LA000092 Not sequential Description of Defect : Description of the Defect : In certain affected motorcycles, a previous safety recall, 20V-813, directed the replacement of second due to inadequate strength under high stress loads. As a result, cracks may occur due to constant stress applied during repeated gear shift operation and, eventually, the gear could break. If transmission failure occurred and, in turn, the rear wheel could lock, increasing the risk of loss of control, increasing the risk of loss of control and a crash FMVSS 1 : NR FMVSS 2 : NR Part 573 Safety Recall Report 21V-865 Page 2 The information contained in this report was submitted pursuant to 49 CFR §573 Description of the Safety Risk : The side of second gear may not be strong enough to handle high speed loads. As a result, cracks may occur due to constant stress applied during repeated gear shift operation and, eventually, the gear could break. If this happens, the transmission and, in turn, the rear wheel, could lock Description of the Cause : second pinion gear may not be strong enough to handle high speed loads. As a result, cracks may occur due to constant stress applied during repeated gear shift operation Identification of Any Warning that can Occur : difficulty shifting, finding neutral and false neutrals may occur prior to gear breakage. Customers are urged not to operate the affected motorcycle until inspection and or modification is performed Involved Components : Component Name 1 : ECU Component Description : Electronic Control Unit Component Part Number : B96-8591A-10 Component Name 2 : ECU Component Description : Electronic Control Unit Component Part Number : B96-8591A-50 Component Name 3 : ECU Component Description : Electronic Control Unit Component Part Number : B96-8591A-51 Component Name 4 : ECU Component Description : Electronic Control Unit Component Part Number : B96-8591A-80 Supplier Identification : Component Manufacturer Name : NR Part 573 Safety Recall Report 21V-865 Page 3 The information contained in this report was submitted pursuant to 49 CFR §573 Address : NR NR Country : NR Chronology : November 2021, Yamaha Motor corporation USA was informed by the manufacturer, Yamaha Motor Co., LTD that such a condition could exist in previously modified units. This was determined pursuant to quality control review, testing and a review of foreign models that use substantially similar part design. Units previously modified under campaign 20V813, customer owner or those reworked by the factory prior to sale will only be subject to ECU reprogramming. Description of Remedy : Description of Remedy Program : Affected units must have the main axle and drive axle assemblies replaced with the stronger parts and the Engine Control Unit (ECU) reprogrammed to prevent excessive rpm leading to second gear damage How Remedy Component Differs from Recalled Component : Second pinion gear is now forged and 2nd pinion on the main axel and 1st and 5th wheel gear on the drive axle have a small identification groove machined on them to aid identification Identify How/When Recall Condition was Corrected in Production : With the start of November 2020 production, the new style forged 2nd pinion gear on the main transmission axel and 1st and 5th wheel gear on the drive transmission axel are used for engine/transmission assembly Recall Schedule : Description of Recall Schedule : We anticipate commencing dealer/consumer notification shortly after the owner’s notification letter is approved by NHTSA, the affected VIN range is ascertained, and the Technical Bulletin’s service procedures are confirmed and finalized by Yamaha staff. assuming the Agency can review and approve the customer notification letter within 5 days of receipt (perhaps November 12th we will have the letter and technical bulletin printed. Normal turnaround time is 3 working days for such a printing. Hence the materials will be ready for mailing approximately November 18th. Final copies of these notification documents will be forwarded to the Agency as soon as possible. Planned Dealer Notification Date : NOV 19, 2021 – NOV 22, 2021 Planned Owner Notification Date : NOV 19, 2021 – NOV 22, 2021 * NR – Not Reported
**************************************************************************************************************
SEOCONTENT-END