“This site contains affiliate links for which OEMDTC may be compensated” |
October 20, 2021 NHTSA CAMPAIGN NUMBER: 21V824000
Improperly Crimped Lifting Cable
An improperly crimped cable may come out of place during a lifting operation, possibly causing the generator set to fall, increasing the risk of injury.
NHTSA Campaign Number: 21V824
Manufacturer Sutphen Corporation
Components EQUIPMENT
Potential Number of Units Affected 1
Summary
Sutphen Corporation (Sutphen) is recalling one 2020 Fire Truck equipped with a Cummins generator set. The lifting cables may be improperly crimped.
Remedy
Cummins will inspect the lifting cable, and either replace the cable or install a warning label, free of charge. Owner notification letters were mailed in October 29, 2021. Owners may contact Sutphen’s customer service at 1-614-889-1005.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Chronology :
May 13, 2021 – An incident occurred at the Cummins assembly plant during which an alternator fell onto an assembly table after the lifting cable pulled out of the ferrule. No injury occurred. That same day, an OEM customer notified Cummins that a unit fell while being lifted at the OEM facility. Cummins initiated a stop ship/stop build and instructed account managers to notify affected OEM’s not to use the cable to lift the gensets pending further investigation of the issue.
May 13 – June 21, 2021 – Cummins conducted an investigation into the issue, including working with the supplier to conduct tests on the cable crimp to evaluate the resulting lifting capability.
May 27, 2021 – Cummins began production with properly crimped cables.
June 17 – July 27 – Cummins assessed the safety risk of this condition.
July 21, 2021 – Cummins published a quality campaign to the field. (TSB210146-07132021 was submitted to NHTSA on August 6, 2021, in accordance with 49 CFR Part 579.5.)
August 10, 2021 – Based upon the results of the investigation, Cummins’ Product Safety Defect Board decided to conduct a safety campaign to address this condition in the subject population. To date, there have been no injuries related to this condition.
21E075 Cummins Generator Lifting Cable
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
SUTPHEN | FIRE TRUCK | 2020 |
6 Associated Documents
Recall 573 Report
RCLRPT-21V824-2086.PDF 214.163KB
Recall 573 Report
RCLRPT-21V824-4910.PDF 214.163KB
Recall Acknowledgement
RCAK-21V824-9788.pdf 645.475KB
Recall Quarterly Report #1, 2021-4
RCLQRT-21V824-4016.PDF 211.121KB
Recall Quarterly Report #2, 2022-1
RCLQRT-21V824-5908.PDF 211.219KB
Recall Quarterly Report #3, 2022-2
RCLQRT-21V824-7446.PDF 211.303KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V824&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- 【What You Get】- Wire rope crimping tool kit includes 1pcs heavy duty crimping plier, 1 roll of wire rope cable whose size is 1/16 inch×328ft, 200pcs aluminum crimping sleeves and 50pcs stainless steel thimbles. You don't need extra accessories for your craft about wires.
- 【Crimper&Cutter】- Crimping tool is made of heavy duty stainless steel, hard and sturdy, the crimping positions are 0.1-0.5mm, 0.5-1.0mm, 1.0-2.0mm, 2.2mm, it is equipped with non-slip grips and self locking mechanism which makes it easy to use and lock. It is equipped with 2 cutters for cutting cables.
- 【328ft Wire Rope】- Wire rope cable is made of 304 stainless steel and made by 7×7 strands construction core 1/16 inch steel cable, it is rust-proof, corrosion-resistant and wear-resistant. The breaking strength is 368lbs. Wire rope cable can be used as needed.
- 【Sleeves & Thimbles】- Thimbles are made of stainless steel, the size of the thimbles are M5. Crimping sleeves are made of aluminum and the size of sleeves are 1.5mm(1/16 inch), they are designed to prevent crushing or overstressing wire rope at the terminal end which is used to protect the eye of a wire rope or sling.
- 【Wide Application】- Wire rope crimping tool kit is widely used for wire rope applications and anything else that require strong cable like dog leashes, clothes lines, marine and industrial rigging, homemade balustrade, outdoor sunshade, garden hanging lamp, etc.
- IWS-1608M including 4 crimping positions from 3/64-inch to 1/8-inch, for aluminium oval and double sleeves, annealed copper sleeves.
- High-carbon steel material, heat-treated and polished jaw ensures tight and clean compression, improves durability for long-time use with rust protection.
- Ergonomic handles with non-slip grips bring extra power transmission, comfort to use with less effort.
- Well worth crimping tool with sloid construction, crimping force adjusted in the factory, and it can be adjusted after hundreds of times use.
- Specialized tool for DIY enthusiast or a professional, recommend a 2-handed use with the body strength or somewhere you can lean against.
- 【Complete Kit】- You will get a battery cable wire lug crimping tool, a cable cutter, 170pcs copper ring terminal block, 210pcs heat shrinkable tube, the size and quantity are complete to meet your various needs.
- 【10-1/0 Lug Crimper】- Professional cable terminal crimping tools are 6mm²/10mm²/16mm²/25mm²/35mm²/50mm² (similar to AWG 10, 8, 5, 3, 2, 0). It uses high-precision jaws to ensure a tight connection after crimping.
- 【Electrolytic Grade Copper】- All ring terminals are made of electrolytic grade copper to achieve maximum conductivity. The heat shrinkable tube is made of high-quality polyethylene material, which is thick and durable.
- 【Labor-saving Crimping】- The handle of the crimping device is up to 10" long and is wrapped with soft rubber. The ergonomic lever structure design can increase friction and make you more labor-saving when crimping.
- 【Heat Shrinkable Tube】- The heat shrinkable tube is made of high-quality polyethylene material, which is thick and durable.
- 【CRIMPING RANGE AND CUTTING RANGE】: Crimping range 12 AWG-2/0 AWG, Max. Cutting 2/0 AWG
- 【MOLD INCLUDE】: Including 9 pairs of the largest hexagon crimping dies (12, 10, 8, 6, 4, 2, 1/0, 2/0AWG)(1/8 "for stainless steel wire rope)
- 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working
- 【Improve】 Innovative collet structure: 1.Increase the mold guide, the mold will not shake left and right. 2.Combined with the overall quenching technology, the pliers head is strong and will not break. Innovative handle return spring: One hand can operate both handles. Compared to products without return springs, it is easier to operate the handle with one hand, and one person can complete the crimping job independently.
- 【Can't cut wire rope】This set includes a cable scissors. Scissors are only suitable for cutting copper or aluminum cables.
- EASY USE TIP: Loading connector & cable then crimps with the aid of hammer.Recommend 2 to 4 lb sledgehammer,with a bigger hammer you don't have to hit it as many times.Also works well in a shop vise.
- Crimping Type: Indent. Terminal Type: Uninsulated.
- WIRE GAUGE: Crimps 8 gauge to 4/0 gauge connectors.8 AWG, 6 AWG, 4 AWG, 2 AWG, 1 AWG, 0 AWG, 00 AWG, 000 AWG, 0000 AWG.
- PROFESSIONAL CRIMP: Ideal for battery and welding cables.
- Full refund for any manufacture defective.
- Hydraulic crimping tool specification: Crimping range 12 AWG-2/0 AWG, Stroke 0.45 Inch
- Hydraulic crimping tool 9 pairs of dies: 12.10.8.6.4.2.1/0. 2/0 AWG and 1/8 "for stainless steel wire rope
- 【Wide Application】 The crimper tool is great for battery and welding cables , power Wires , and electrical cables ,even can be rotated 180° freely for narrow space working
- 【Comfortable grip】 The vinyl-dipped grip is very comfortable and easy to use and Wont slip
- 【Easy operation】The mold can be easily replaced by one-way fixed latch
- 【Versatilel】For AWG 8,6,4,2,1,1/0 battery cable lugs, compatiable with copper&aluminum cable lug,non-welding and standard electrical connection.
- 【Product upgrade】It will bring embossing AWG value to the cable lugs after crimping for a visual checking. Facilitates the selection of the correct parts for later repairs.
- 【Precise dies】Hexagonal rotating dies are processed with Wire EDM Cutting, more accurate than normal casting dies. Ensure solid compressions.
- 【Comfortable operation】Comfortable grip with antislip surface saves strength and improves user's experience for easy handling and control.
- 【Solid construction】Made of high quality carbon steel which can offer long service life. Ensure solid compressions.
- High precision wire rope crimping tool is made of heavy duty stainless steel hard and sturdy,Aircraft Cable And wire rope thimbles made of aluminum and 304 stainless steel, provides maximum corrosion resistance and excellent protection against surface of wire rope.
- It have 4 Crimping Positions: 0.1-0.5mm, 0.5-1.0mm, 1.0-2.0mm, 2.2mm.can easily crimp sleeve and more from 50-450 lb test line
- It with non-slip grips and self locking mechanism design and makes it more relax cuts cable precisely,This one comes with a non-slip grip and a safety lock.
- Crimping tool coordinate with barrel ferrule can be widely used for railings, dog ropes, clotheslines, fishing crimping sleeves hanging picture or other marine and industrial rigging and guardrail nets
- Products include 1pcs of wire rope crimping tool,160pcs 1/16" double barrel ferrules,12pcs 1/16" wire rope thimbles,20 meters 1/16" Aircraft Cable
- The overall length of this Hand Swager Crimper is 24 inch
- This Swaging Tool is for wire rope in crimping capacity: 3/16"(5.0mm); Swaging capacity: 1/16"(1.5mm)-5/64"(2.0mm), 5/64"(2.0mm)- 7/64"(2.8mm), 1/8"(3.0mm)-7/50"(3.5mm), 5/32"(4.0mm), 3/16"(5.0mm)
- This Wire Rope Crimping Tool is designed for crimping copper and aluminum oval sleeves and stop sleeves
- The jaw of our hand swager crimper is made of forged alloy steel, long handle design for labor saving
- This hand swager crimper gives you a tight and clean compression on each crimping, and 5 CAVITY for wide using situation
- ✅【EXCELLENT QUALITY】: YUZES YQK-70 hydraulic crimping tool made of durable materials with high strength and good toughness. Combined with the overall quenching technology, the pliers head is strong and will not break.Dies are made of hardened steel with chrome finish, crimped stainless steel fitting terminal is more tight.
- ✅【CRIMPERS TOOL INCLUDE】: Wire crimper tool includes 9 pairs of the largest hexagon crimping dies:#4, #6, #8, #10, #16, #25, #35, #50, #70mm² (12, 10, 8, 6, 4, 2, 1/0, 2/0AWG)for crimpingfor cable railing kits
- ✅【VERSATILE CRIMPING MACHINE】: Crimpers can be used for the manufacture of vehicle battery cables, straight-through cable manufacturing, a variety of home-use tasks, hydraulic crimping tool can be freely rotated 180° to adapt to the different environments in which it works.
- ✅【EASY OPERATION】: On-Off control for quick operation, one person can complete the crimping job independently. The C-style head makes operation easier and better. After the clamping is completed, just turn back the button, the swagging tool will release automatically.
- ✅【WIDE APPLICATION】: The wire crimper tool is great for battery and welding cables , power wires , various deck railing kits, and electrical cables; and also can crimps 12 AWG to 2/0 AWG size of copper and aluminum wires
Last update on 2024-04-15 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.