Improperly Tightened Lug Nuts – 2019-2021 Doosan Portable Power Air Compressors & Mobile Generators

“This site contains affiliate links for which OEMDTC may be compensated”

October 20, 2021 NHTSA CAMPAIGN NUMBER: 21V826000

Improperly Tightened Lug Nuts

Improperly tightened lug nuts can cause a loss of trailer stability, or the tire could fall off, increasing the risk of a crash.

 

NHTSA Campaign Number: 21V826

Manufacturer Doosan Portable Power

Components WHEELS

Potential Number of Units Affected 734

 

Summary

Doosan Portable Power (Doosan) is recalling certain 2019-2021 Doosan Portable Power Air Compressors and Mobile Generators. The wheel lug nuts may be improperly tightened.

 

Remedy

Owners are advised to not tow their trailer until the remedy has been performed. Dealers will tighten the lug nuts, free of charge. Owner notification letters were mailed November 4, 2021. Owners may contact Doosan customer service at 1-800-633-5206, Option #3.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.

 


Doosan Portable Power
Doosan Portable Power

 


SAFETY RECALL

 

November 4, 2021

 

Technical Service Bulletin:

Wheel Lug Nut Torque Inspection

 

TSB Number: 12-21-6

 

Revision: This TSB replaces TSB dated October 11, 2021 with revised models affected and serial number tables. The units not affected by this SAFETY RECALL have been removed.

 

Class (AA-Safety Mandatory, A-Mandatory, B-Non-Mandatory, Product Improvement, Information Only):

AA-Safety Mandatory

 

Models Affected: Various Portable Air Compressors and Mobile Generators

 

Serial Number Break: See attached charts for affected models and serial numbers

 

Audience: Dealer Service Group and National Rental Accounts

 

Issue: 

The wheel lug nut torque on the portable air compressor and mobile generator equipment identified in this letter may not meet engineering specifications. If out of specification, the equipment may experience vibration, tire wobble, or the wheel(s) could come off during towing.  

 

Solution:

Immediately stop towing the affected equipment until the corrections instructed in this bulletin have been completed. Inspect and correct all affected equipment based on the applicable scenario below:

 

Scenario 1: Unit Has Not Been Towed

Properly torque the wheel lug nuts to the correct specification using the star pattern method (see Figure 1). Refer to the attached charts for correct wheel lug nut torque specification per unit model.

 

Scenario 2: Unit Has Been Towed

Remove the wheels and inspect wheel studs and holes in the wheels for damage.

  • If no damage is observed, reinstall the wheels and torque the lug nuts to the correct specification using the star pattern method (see Figure 1). Refer to the attached charts for correct wheel lug nut torque specification per unit model.
  • If damage is present, further inspect the area around the wheel for additional damage (for example, the wheel hub, leaf springs, etc.) and take clear photographs of all damaged components. Fill out the attached call sheet and call 1-800-633-5206 Option #3 to consult with a Doosan Factory Technician for guidance on parts to be replaced.

 

Instruct owner to re-check wheel lug nut torque again after 20 miles of towing.

 

Reminder: The Operation and Maintenance manual advises to CHECK Wheel Lug Nut torque on a Monthly basis. 

 

Warranty: Campaign #12-21-6 is active in the warranty system for each potentially affected machine.

 

Scenario 1 repair: 1 hour (single axle), 1.25 hour (dual axle), or 1.5 hour (tri axle) labor plus travel time/mileage will be accepted per claim.

 

Scenario 2 repair: Labor time of repair, plus parts (if required), plus travel time/mileage will be accepted per claim. Attach photos of damaged/replaced parts to the warranty claim. All damaged/replaced parts shall be disposed of to prevent reuse.

 

All claims must be submitted as claim type = “Field Modification”.

 

Unit Model/Serial Number/Wheel Lug Nut Torque Charts: 

MOBILE GENERATORS 

Model Total Units Beginning Serial # Ending Serial # Wheel Lug Nut  Torque
G25WDO-3A-T4F 165 501715UCAFH45 503276UGAFH45 100‐120 Ft.‐Lbs.
G40WDO-3A-T4F 12 501771UDAFH46 503028UFAFH46 100‐120 Ft.‐Lbs.
G50WDO-3A-T4F 16 501772UDAFH35 503044UFAFH35 100‐120 Ft.‐Lbs.
G70WDO-3A-T4F 4 502863UFAFH41 503030UFAFH41 100‐120 Ft.‐Lbs.
G70WDO-3Q-T4F 600V 6 501769UDAFH66 502432UEAFH66 100‐120 Ft.‐Lbs.
G125WCU-3Q-T4F 600V 4 501923UDAFH67 502124UDAFH67 100‐120 Ft.‐Lbs.
G240WCU-3Q-T4F 600V 2 501920UDAFH11 501921UDAFH11 100‐120 Ft.‐Lbs.
G325WCU-3Q-T4F 600V 3 501922UDAFH13 501957UDAFH13 100‐120 Ft.‐Lbs.
G400WCU-3B-T4F 91 490767UAADH14 503135UGAFH14 140‐170 Ft.‐Lbs.
G400WCU-3Q-T4F-600V 21 494213UEADH36 503318UHAFH36 140‐170 Ft.‐Lbs.
G570WCU-2B-T4F 31 501918UCAFH80 503122UGAFH80 100‐120 Ft.‐Lbs.

 

MOBILE GENERATORS (Reman) 

Model Affected Serial #’s Wheel Lug Nut  Torque
G570WCU-2B-FX-T2 425744RBAFH76, 437711RBAFH76, 455329RCAFH76 100‐120 Ft.‐Lbs.

 

Unit Model/Serial Number/Wheel Lug Nut Torque Charts: 

PORTABLE AIR COMPRESSORS 

Model Total Units Beginning Serial # Ending Serial # Wheel Lug Nut  Torque
HP375WCU-T2-EX 1 502433UEAFG03 N/A 100‐120 Ft.‐Lbs.
P425/HP375WCU-T4F 140 501733UDAFH17 503003UFAFH17 100‐120 Ft.‐Lbs.
HP450/VHP400WCU-T4F 30 501714UCAFH18 502833UFAFH18 100‐120 Ft.‐Lbs.
XP825/HP750WCU-T4F 27 501831UCAFF72 503134UGAFF72 100‐120 Ft.‐Lbs.

 

PORTABLE AIR COMPRESSORS (Reman) 

Model Affected Serial #’s Wheel Lug Nut  Torque
HP375WCU 389396REAFB11 100‐120 Ft.‐Lbs.
XP375WIR-T3 354296RCAFC48, 363138REAFC48, 412230RFAFC48 100‐120 Ft.‐Lbs.
HP750WCU-T1 312205RDAFH42, 325930RDAFH42 100‐120 Ft.‐Lbs.
HP750WCU-T3 346794RFAFH37, 353590RDAFH37, 354085RFAFH37, 354087RFAFH37, 364987RDAFH37, 392125RFAFH37, 412321RBAFH37, 425922RBAFH37 100‐120 Ft.‐Lbs.
XP825WCU-T1 263729RDAFH43, 283897RGAFH43, 290573RDAFH43,  306991REAFH43, 333214RDAFH43 100‐120 Ft.‐Lbs.
XP825WCU-T3 339744RDAFH40, 364986RCAFH40, 415888RBAFH40 100‐120 Ft.‐Lbs.
HP915WCU-T3 413412REAFH53, 441557REAFH53 100‐120 Ft.‐Lbs.

 


Chronology :

Doosan Portable Power received a report on 7/29/21 of loose wheel lug nuts on four mobile generators. Based on the report, the company initiated an internal investigation. The company determined potential noncompliance with manufacturing requirements, and as of August 15, 2021 the wheel lug not torque on all production units are being tested and validated to ensure Engineering specifications have been achieved. During the investigation, the company received additional reports received on 8/17/21, 9/29/21, 10/4/21, and 10/5/21 of wheels coming off various portable air compressors and mobile generators while being towed.

On 10/04/21, the company contacted NHTSA to initiate reporting the issue. On 10/14/21, the company started notifying national account customers that owned the majority of potentially affected units, provided serial numbers, instructed them to stop towing immediately, and instruction on how to properly check and correct the issue as needed.

 


6 Affected Products

Vehicles

MAKE MODEL YEAR
DOOSAN PORTABLE POWER AIR COMPRESSOR 2019-2021
DOOSAN PORTABLE POWER MOBILE GENERATOR 2019-2021

 


16 Associated Documents

Remedy Instructions and TSB

RCRIT-21V826-1425.pdf 729.866KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [712.76 KB]

 


Recall Acknowledgement

RCAK-21V826-1667.pdf 1016.807KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [0.97 MB]

 


Defect Notice 573 Report

RCLRPT-21V826-3556.PDF 212.45KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [207.47 KB]

 


Remedy Instructions and TSB

RCRIT-21V826-2874.pdf 732.243KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [715.08 KB]

 


Recall 573 Report – Amendment 3

RCLRPT-21V826-8087.PDF 214.359KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [209.33 KB]

 


Recall Quarterly Report #1, 2021-4

RCLQRT-21V826-3575.PDF 211.123KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.17 KB]

 


Recall 573 Report – Amendment 2

RCLRPT-21V826-4331.PDF 213.586KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [208.58 KB]

 


Recall Quarterly Report #2, 2022-1

RCLQRT-21V826-4310.PDF 211.222KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.27 KB]

 


Recall Quarterly Report #2, 2022-1

RCLQRT-21V826-6336.PDF 211.384KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.43 KB]

 


Recall Quarterly Report #1, 2021-4

RCLQRT-21V826-4027.PDF 211.39KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.44 KB]

 


Recall Quarterly Report #3, 2022-2

RCLQRT-21V826-7061.PDF 211.39KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.44 KB]

 


Recall Quarterly Report #4, 2022-3

RCLQRT-21V826-4645.PDF 211.39KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.44 KB]

 


Recall Quarterly Report #2, 2022-1

RCLQRT-21V826-1609.PDF 211.381KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.43 KB]

 


Recall Quarterly Report #1, 2021-4

RCLQRT-21V826-3286.PDF 211.387KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.43 KB]

 


Recall Quarterly Report #3, 2022-2

RCLQRT-21V826-8839.PDF 211.387KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.43 KB]

 


Recall Quarterly Report #4, 2022-3

RCLQRT-21V826-8530.PDF 211.387KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [206.43 KB]

 


Latest Recalls Documents

For the Latest and Most Recent Recalls Information Visit the link below…

https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V826&docType=RCL

 


 

SaleBestseller No. 1
MIKKUPPA M12x1.5 Lug Nuts - Replacement for 2006-2019 Ford Fusion, 2000-2019 Ford Focus, 2001-2019 Ford Escape Aftermarket Wheel - 20pcs Chrome Closed End Lug Nut
  • 🚗 WE' RE DIFFERENT - MIKKUPPA innovative closed end bulge Lug Nuts design provides a safer and more reliable closed end nut than any other on the market. One-piece design compared with other two-piece design, Anti-cracking off and make it aesthetically pleasing while ensuring safe driving. 【This kit does not hold the wheel cover! ! !】
  • 🚗 PERFECT FIT - Replacement for 2004-2019 Acura TSX. 2002-2019 Chevy Trailblazer, 2001-2019 Ford Escape, 2000-2019 Ford Focus, 2006-2019 Ford Fusion, 1999-2019 Honda Accord/CR-V, 2005-2019 KIA Sportage LX EX, 1995-2019 Toyota Avalon, etc.
  • 🚗 SPECIFICATION - M12x1.5 thread - closed end bulge style lug nuts - conical 60 degree seat - 19mm hex - 35.05mm long - 22mm wide - color: silver / chrome. Our nuts have an innovative design in appearance due to personal preference, but the thread specifications fully meet vehicle standards, buy with confidence.
  • 🚗 ONE-PIECE LUG NUTS - The one-piece structure design is more splendid and safer than the two-piece design. Triple chrome, cold forged and heat treated steel, anti-rusting and anti-stripped, high strength and durability.
  • 🚗 WORRY-FREE SHOPPING EXPERIENCE - We go above and beyond to provide the highest quality wheel lug nut and top notch customer service. Contact us and we will give you a satisfactory answer within 24 hours. The 12-month warranty gives you a worry-free shopping experience.
SaleBestseller No. 2
White Knight 1707S-20AM Chrome M12x1.50 Bulge Acorn Lug Nut, 20 Count (Pack of 1)
  • For Select Aftermarket and Factory Wheels.
  • Specifications: M12 x 1.50 Thread Pitch, 1.40” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Bulge Acorn.
  • Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish chrome or black chrome finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
  • ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
  • 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact us for warranty replacement or fitment issues.
Bestseller No. 3
MIKKUPPA M14x1.5 Lug Nuts - One-Piece Chrome OEM Factory Style Large Acorn Seat Lug Nuts 7/8" Hex Replacement for 199-2022 Chevy Silverado 1500, 1999-2022 GMC Sierra 1500 24pcs
  • 🚗 FITMENT - Replacement for 1999-2022 Chevy Silverado 1500, 2012-2022 Suburban, 2001-2022 Tahoe, 2000-2022 GMC Yukon, 1999-2022 Sierra 1500, and fit all m14x1.5 7/8" hex conical seat wheel nuts.
  • 🚗 SPECIFICATION - M14x1.5 Thread - closed end bulge style lug nuts - conical 60 degree seat - 7/8" (22mm)hex - 1.46" Hight - color: silver / chrome.
  • 🚗 ANTI-OXIDATION - Triple chrome, cold forged and heat treated steel(anti-rusting and anti-stripped, high strength and durability).
  • 🚗 QUALITY - One-piece design, meets or exceeds OEM factory standards. It is perfect for those who live in the rust belt or an area that salts the roads during the winter.
  • 🚗 WORRY-FREE SHOPPING EXPERIENCE - Contact us and we will give you a 100% satisfactory answer within 24 hours. The 12-month warranty gives you a worry-free shopping experience.
Bestseller No. 4
White Knight 1304-1S-20AM Zinc 1/2"-20 Open-End Bulge Acorn Lug Nut, 20 Pack
  • For Select Aftermarket or Factory Wheels or Wheels wih Hubcaps Covers
  • 1/2"-20 Thread Pitch, 0.79” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Open-End Acorn.
  • Features: Cold forged carbon steel and tested to industry standards. Durable construction, Stylish zinc finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
  • ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
  • 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact us for warranty replacement or fitment issues.
Bestseller No. 5
MIKKUPPA M14x1.5 Lug Nuts, Replacement for Silverado, Ford, GMC Aftermarket Wheel - 24pcs Chrome Closed End Bulge Acorn Lug Nuts
  • 🚗【1.80" LONG】M14x1.5 thread - closed end bulge style lug nuts - conical 60 degree seat - 19mm hex - 1.80 in. long - 0.90 in. wide - color: Chrome. Our nuts have an innovative design in appearance due to personal preference, but the thread specifications fully meet vehicle standards, buy with confidence.
  • 🚗 【PERFECT FIT】Replacement for 2007-2013 Avalanche, 2015-2021 Colorado, 2003-2014 Express 1500, 1999-2021 Silverado 1500, 2015-2021 Suburban, 2000-2014 Suburban 1500, 1995-2020 Tahoe, 2009-2020 Traverse, 2007-2020 Acadia, 2015-2020 Canyon, 1999-2020 Sierra 1500, 2000-2020 Yukon, 2015-2020 F150/Expedition.
  • 🚗【ONE-PIECE DESIGN】On vehicle testing, one-piece design compared with other two-piece design, Anti-cracking off and make it aesthetically pleasing while ensuring safe driving. Our products have undergone extensive on-vehicle testing to ensure proper fit and long-lasting performance before selling them.
  • 🚗【ANTI-RUST PROCESS】The surface of the lug nut is chrome-plated, after 72 hours of strict salt spray test, which not only makes the nut resistant to oxygen and corrosion, but also gives the nut a bright visual impact. Using infrared drying technology, the paint is integrated with the metal and will Not fall off easily. Manufactured with high-quality SCM 435 Steel (Heat Treated) for stronger.
  • 🚗【WORRY-FREE SHOPPING EXPERIENCE】If there is a problem with the number of missing nuts, please don't hesitate to contact us. Every MIKKUPPA product enjoys a 24-hour response, a 30-day unconditional refund and a 1 year warranty. Professional customer service promise to give you a satisfied solution.
SaleBestseller No. 6
SCITOO M12x1.25 Wheel Lug Bolt 12x1.25 Lug Nut Bolts 20 Pcs Silver Shank Length 28mm Compatible with for Jeep Compass for Renegade for Cherokee, for Fiat, for Chrysler 200, for Dodge Dart
  • 🚙【WHEEL BOLT LUG NUTS COMPATIABLE VEHICLES】M12x1.25 wheel bolt compatible with 2017-2019 for Compass,2014-2023 for Cherokee,2015-2022 for Renegade, 2015-2017 for Chrysler 200, 2013-2016 for Dodge Dart, 2012-2017 for Fiat 500
  • 🚙【FEARTURES】20 Pcs wheel bolts lug nuts are 12*1.25, shank length 28mm. Hex Size:17mm, Seat:Conical/60 grade 35CrMo Lug Nuts are Cold Forged/Exceeds OEM Quality
  • 🚙【HIGH QUALITY】These M12x1.25 wheel studs lugs nuts are made from 35CrMo which have tested and meet or exceed OEM performance requirements
  • 🚙【PLEASE CHECK】 Check your original thread pitch and seat type carefully, this only fit for M12x1.25 and conical/cone seat as shown
  • 🚙【BUYING SERVICE】We provide ONE YEAR WARRANTY for our this product.If you have any questions about products, please feel free contact us, we will provide you with the most satisfactory solution
Bestseller No. 7
White Knight 1707SBK-20AM Black Chrome M12x1.50 Bulge Acorn Lug Nut, 20 Pack
  • Country Of Origin : China
  • Height: 1. 40 Inch
  • Hex Size: 3/4 Inch
  • Package Weight : 2.38 Lbs
Bestseller No. 8
12x1.5 Lug Nuts 20 Pcs Chrome Closed End Mag Style Lug Nuts with Washer 13/16" (21mm) Hex Compatible with Toyota Camry/Corolla/Tacoma Lexus
  • One-piece Solid lug nuts feature durable design and provide perfect replacement for your Tacoma, 4Runner, Corolla, GX470
  • Specifications: 12x1.5 Thread Pitch; 13/16'' (21mm) Hex; 1.49" (38mm) OAL; Closed End; Color: Chrome
  • 10.9-grade Heat-treated premium steel construction, which offers better durability and strength.
  • Replace Part # 9094201058, 9008017036, 90942-01058, 9008-17036, 9094201084
  • One-piece lug nuts unlike OEM OEM Cap Construction lug nuts, which means Reeauto's Lug nuts will definitely not break apart like your TOYOTA, LEXUS stock lug nuts
Bestseller No. 9
White Knight 1307-1S-20AM Zinc M12x1.50 Open-End Bulge Acorn Lug Nut, 20 Pack
  • For Select Aftermarket or Factory Wheels or Wheels wih Hubcaps Covers
  • M12 x 1.50 Thread Pitch, 0.79” Overall Height, 0.90" Diameter, 3/4" Hex, 60° Conical Seating, Open-End Acorn.
  • Features: Cold forged carbon steel and tested to industry standards. Durable construction. Stylish zinc finish. Utilizes traditional hex-body bulge-acorn design for fast and easy installation.
  • ATTENTION: Refer to the owner’s manual or the wheel manufacturer’s guide for the correct thread size, seat style, length, hex and torque specifications. You assume all liability of improper installation which can result in accident and/or injury.
  • 1 year manufacturer warranty. Always check your vehicle fitment before purchasing! Contact us for warranty replacement or fitment issues.
Bestseller No. 10
Toyota Pass Cars with Aftermarket Wheels" rel="nofollow noopener sponsored" target="_blank"> Wheel Accessories Parts 20 Pcs M12 x 1.5 12 x 1.5 Thread Bulge Acorn 35mm 1.38" Long Lug Nuts Chrome 3/4" 19mm Hex Fits Many Chevy Honda Passenger Cars | Toyota Pass Cars with Aftermarket Wheels
  • 20 Pcs | M12 x 1.5 12 x 1.5 Thread | Type: Bulge Acorn | Length : 35mm 1.38" | Finish: Chrome | Hex: 3/4" 19mm | 2 Piece Construction
  • Always use AMAZON CONFIRMED FIT to validate product fitment to your vehicle. This item fits Chevrolet 1982-2002 Camaro 1991-96 Caprice 1984-2019 Corvette 1982+ Malibu 2012-20 Sonic 2013+ Spark|Dodge 1983-87 Charger | Ford 2013-19 C-Max 1995-2000 Contour 1981-2003 Escort 2001-19 Fiesta 2012-18 Focus| Hyundai 2006-17 Azera 2007+ Elantra 2013-14 Elantra Coupe 2013-20 Elantra GT 2022+ Elantra N 2009-16 Genesis 2010-16 Genesis Coupe 2017+ Ioniq 2004+ Sonata 1985-87 Veloster 2019+ Veloster N
  • Designed In USA - Two Piece Design ensures secure clamping in the event of wrong lug nut length. Cap will break protecting you from false torque readings. Giving you peace of mind. Meets or Exceeds OEM Factory Standards.
  • Cold forged carbon steel. High quality precise threads. Built to SAE Standards. Rust resistant finish

Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...