“This site contains affiliate links for which OEMDTC may be compensated” |
July 21, 2021 NHTSA CAMPAIGN NUMBER: 21V553000
The safety cable may not prevent trailer detachment in the event the coupler fails, increasing the risk of a crash.
NHTSA Campaign Number: 21V553
Manufacturer Tracker Marine, LLC
Components TRAILER HITCHES, EQUIPMENT
Potential Number of Units Affected 145
Summary
Tracker Marine, LLC (Tracker) is recalling certain 2021-2022 Ranger Trail RT198PP and RT198PPB trailers. An incorrect-size safety cable was installed, which is under-rated for the size of the trailer.
Remedy
Dealers will replace the safety cable, free of charge. Owners may contact Tracker customer service at 1-417-873-4555. Tracker’s number for this recall is TS-0039.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
July 21, 2021
Recall Notice
Recall #TS-0039 : Safety Cable Replacement
Condition: Need to replace equipped Class 2 safety cables with Class 4 safety cables.
Models Affected: Model Year ’21 and ’22 RT198PP non-brake and RT198PPB brake trailers
Time Allowed: .25 hour
Recall Information
DESCRIPTION OF CONCERN:
Affected units are equipped with Class 2 safety cables. These need to be replaced with Class 4 safety cables.
REQUIRED PART NUMBER:
Quantity of 2:
186881-CABLE,BLK PVC,S HOOK,CLS IV
VERIFICATION PROCESS: N/A
CORRECTIVE ACTION:
See instructions below. Order the necessary parts on the dealer portal and file a claim for parts and labor once the repairs are complete.
View the complete recall details from the recall tab on the Dealer Portal
NOTE THAT INTERNET EXPLORER MUST BE USED TO ENABLE LINKS TO VIEW DOCUMENTS
Replace Safety Cables
RT198PP non-brake
and
RT198PPB brake trailers
Use White River Marine Group part number 186881 (class 4 safety cable) for replacement
Total time allowed 15 minutes per trailer
Tools needed:
1 -¾” open end wrench wrench
1 -¾” socket – ratchet
- Remove the class 2 – 3500lb cable by holding the bolt inside the tongue with a ¾” and a ¾” socket wrench to remove the nut.
Replace the cable with a class 4 7,000lb.
- Reinstall the washer over the cable and then thread on the nut. Tighten the nut by holding the bolt inside the tongue with a ¾” wrench and a socket wrench on the nut. Do not overtighten the nut. You should be able to pivot the cable on the bolt with a little resistance.
2 Affected Products
Vehicle
MAKE | MODEL | YEAR |
RANGER TRAIL | RT198P | 2021-2022 |
7 Associated Documents
Safety Bulletin
RCSB-21V553-4182.pdf 832.854KB
Defect Notice 573 Report
RCLRPT-21V553-5247.PDF 212.581KB
Recall Acknowledgement
RCAK-21V553-4731.pdf 646.298KB
Recall Quarterly Report #1, 2021-3
RCLQRT-21V553-1257.PDF 211.127KB
Recall 573 Report- Amendment 1
RCLRPT-21V553-2525.PDF 212.728KB
Recall 573 Report- Amendment 2
RCLRPT-21V553-3918.PDF 212.781KB
Recall Quarterly Report #3, 2022-1
RCLQRT-21V553-2344.PDF 211.313KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V553&docType=RCL
- 👍[ UPGRADE EQUIPMENT G80 ] -- Heavy duty grade 80 transport chain is made using high-strength, heat-treated alloy.G80 chains provide a higher safe working load than lower grade chains, but weigh the same.
- 👍[ PROFESSIONAL DESIGN ] -- Designed for connecting from your trailer to your vehicle to help resist complete vehicle-trailer separation during a disconnect. When connecting safety chains for towing, two chains should be used.
- 👍[ HEAVY DUTY CONSTRUCTION ] -- The high quality, standard link 5/16" size chain is heat-treated, and strength tested for superior quality. The chain retainer has a removable zinc-plated pin and cotter for easy chain installation and replacement.
- 👍[ RELIABLE TRANSPORTATION ] -- This trailer safety chain has a grade-80 rating, providing exceptional tensile strength and resisting abrasions and wear from heavy cargo. Yellow zinc chromate finishes for corrosion protection and makes it easy for DOT officials to recognize.
- 👍[ SAFE & COMPLIANT ] -- All our grade 80 chains and clevis snap hook is embossed with the proper markings to meet NACM standards. You will be compliant with any roadside inspection. Please feel free to us if you have any problems. (Each safety chain must meet or exceed the gross trailer weight!!!)
- Hook at each end has a spring clip to prevent accidental disengagement
- Class II; meets all SAE specifications
- Note: for safety, 2 chains are required per trailer
- Attwood products are both compatible and reliable, engineered and built with a never-fail attitude
- Welded solid steel links with weather-resistant zinc-plated finish for dependable performance
- (Pack of 2) Safety Chains with 5/16inch Clevis Snap Hook and Chain Retainers
- Designed to connect from your trailer to your vehicle to help resist complete vehicle-trailer separation in the event of a disconnection while towing
- Chain has a grade-70 rating and a minimum break force of 18,800 lbs. (two trailer safety chains advised; each safety chain must meet or exceed the gross trailer weight)
- Constructed from high-strength steel links and is protected with a durable zinc plating to resist rust and corrosion in spite of the outdoor elements
- When connecting safety chains for towing, two chains should be used. The safety chains should be crossed once underneath the coupler and hooked onto the trailer hitch receiver safety chain loops
- DEPENDABLE SAFETY. This trailer safety chain is designed to connect from your trailer to your vehicle to help resist complete vehicle-trailer separation in the event of a disconnection while towing
- HIGHLY VERSATILE. Add versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard, square 1-1/4-inch receiver hitch and comes with a ball mount with a 3/4-inch ball hole to connect a small trailer
- READY TO COUPLE. For safe, secure coupling to the vehicle, this 48-inch long trailer chain comes with two pre-attached safety chain hooks. The 7/16-inch S-hooks are fast and easy to install
- EASY TO USE. When connecting safety chains for towing, two chains should be used. The safety chains should be crossed once underneath the coupler and hooked onto the trailer hitch receiver safety chain loops
- CORROSION-RESISTANT. This trailer safety chain is constructed from 1/4-inch diameter, high-strength steel links and is protected with a durable zinc plating to resist rust and corrosion in spite of the outdoor elements
- Chain has a grade-70 rating and a minimum break force of 18,800 lbs. (two trailer safety chains advised; each safety chain must meet or exceed the gross trailer weight)
- 35-inch long trailer chain comes with safety chain hook. The 5/16-inch clevis hook features a spring-loaded lever for enhanced security
- Constructed from 5/16-inch diameter, high-strength steel links and is protected with a durable zinc plating to resist rust and corrosion in spite of the outdoor elements
- Designed to connect from your trailer to your vehicle to help resist complete vehicle-trailer separation in the event of a disconnection while towing
- Package Includes: Two 35inch G70 5/16" Tow Chains and Two 5/16" Safety Hooks
- DEPENDABLE SAFETY. These trailer safety cables are designed to connect from your trailer to your vehicle to help resist complete vehicle-trailer separation in the event of a disconnection while towing.Fit Type: Universal
- HIGHLY VERSATILE. Add useful, versatile towing options to your vehicle with this class 1 trailer hitch. It provides a standard 1-1/4-inch x 1-1/4-inch receiver hitch, allowing you to tow a small trailer or mount a cargo carrier or bike rack
- SUPERIOR DURABILITY. These trailer safety cables are constructed from 3/8-inch diameter, high-strength steel cable and are protected with a vinyl coating to resist rust and corrosion in spite of the outdoor elements
- HIGH-STRENGTH. These trailer cables have a minimum break force of 7,500 lbs. (two trailer safety chains or cables advised; each safety cable must meet or exceed the gross trailer weight)
- READY TO COUPLE. For safe, secure coupling to the vehicle, these 44-inch long trailer cables come with two pre-attached safety chain hooks. The 17/32-inch snap hooks feature a spring-loaded lever for enhanced security
- 💪[ POWERFUL GRADE G80 ] -- Heavy duty grade 80 transport chain is made using high-strength, heat-treated alloy.G80 chains provide a higher safe working load than lower grade chains, but weigh the same.
- 💪[ HEAVY DUTY CONSTRUCTION ] -- The high quality, standard link 3/8" size chain is heat-treated, and strength tested to ensure that the chain is not easy to break and operates more stable. Forged hook with safety clip at the chain end makes the trailer process safer.
- 💪[ UPGRADE EQUIPMENT ] --The grade of the traction chain is Grade 80, with excellent tensile strength and long service life. Color zinc plating surface treatment, rust prevention and corrosion resistance,and makes it easy for DOT officials to recognize.
- 💪[ DESIGN FOR SECURITY ] -- Designed for connecting from your trailer to your vehicle to help resist complete vehicle-trailer separation during a disconnect. With a 7,100 pound Safe Working Load and a 4:1 safety factor. It is very suitable for the towing of heavy vehicles and ships.
- 💪[ PROFESSIONAL & COMPLIANT ] -- All our grade 80 chains and both G70 forged hooks are embossed with the proper markings to meet NACM standards. You will be compliant with any roadside inspection. Please feel free to us if you have any problems. (Do not exceed work load limit!!!
Last update on 2024-04-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.