Campaign No. 2021030016, April, 2021
| TO: | ALL MERCEDES-BENZ & FREIGHTLINERCENTERS |
| SUBJECT: | Model 907 Model Year 2020 Provide and Program Two Vehicle Keys |
MBAG, the manufacturer of Mercedes-Benz & Freightliner Sprinter Vans, has determined that certain Sprinter vehicles were delivered with two electronic keys, and two mechanical keys as a substitute due to supplier constraints.
MBUSA and DVUSA is conducting a service campaign.
An authorized Mercedes-Benz & Freightliner Sprinter dealer will provide and program two additional vehicle keys
Prior to performing this Service Campaign:
- Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.
- Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.
Approximately 3,008 vehicles are affected.
Order No. V-SC-2021030016
This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data
Control, and MBUSA-SLP S424HH001, Control of Quality Records.
Model 907, 910
with code FZ9 (Two additional master keys)
Operation no. of the operation texts or standard texts and flat rates
Category Op. no. Operation text Time Acc. no. Code
L 02 1254 Operations: Program 2 additional keys 0.4hrs 80 910 53 VS3VEHIKE
Y
The mechanical parts (key bits) of the two additional keys were handed over to the customer previously when the
vehicle was delivered.
Topical note Notes on carrying out repair work
in the vehicle interior
AH68.00-N-0001-01S
g Check
1 Check, whether the vehicle is
affected by the measure.
Affected vehicles: Program 2
additional keys (code:
VS3VEHIKEY, acc. no.: 80 910 53)
Model 907.### ## as of 034804 up
to 314021
with code FZ9 (Two additional
master keys)
SM80.35-D-0002-01AAA
Affected vehicles: Program 2
additional keys (code:
VS3VEHIKEY, acc. no.: 80 910
53)
Model 910.### ## as of 039102 up
to 318064
with code FZ9 (Two additional
master keys)
SM80.35-D-0002-01AAB
i
For authorized Mercedes‑Benz
service partners, only the entry in
the Extended VEGA Application
(EVA) system, in the "Current" tab,
is decisive. An additional test of the
affected vehicles in the workshop
information system (WIS) or
vehicle list is thereby not
necessary.
Programming
2 Connect diagnostic system.
a AD00.00-D-2000-06TS
i
It is absolutely essential to
precisely follow the operation steps
as described in the vehicle
diagnosis system.
V-SC-2021030016 1
3 Connect charging equipment.
f Maintaining on-board electrical
system voltage when performing
test and diagnosis work on vehicle
AR54.10-D-1127TS
p
During the entire work procedure a
sufficiently large voltage supply
must be provided for the vehicle's
on-board electrical system.
Otherwise any undervoltage that
occurs may damage the control
units.
i
Follow the operating instructions
for the charger.
i
Use the charger to ensure that an
adequate power supply (min.
12.5 V) is provided for the onboard
electrical system battery.
4 Program 2 additional keys.
u Service Information: Programming
and ordering a replacement key or
additional key
SI80.57-P-0008A
i
Compliance with the DRT
Directives and a completely filled
out, signed and archived DRT
form, where applicable, in
combination with the repair order
are necessary at all times. When
ordering one or more replacement
or additional keys, the DRT form
must always be filled out in full,
signed and archived.
Observe the Service Information.
i
It is absolutely essential to
precisely follow the operation steps
as described in the vehicle
diagnosis system.
5 Disconnect diagnostic system.
a AD00.00-D-2000-06TS
6 Remove charger from vehicle.
f AR54.10-D-1127TS
g Check
7 Perform function test of additional
keys.
2 V-SC-2021030016
Parts ordering note
Part no. Designation Quantity
Key (see XENTRY Parts Information) 2
Provide and Program 2 additional keys
Model 907
Model Years 2020
https://www.startekinfo.com/service/download-document/outside/225296/
https://static.oemdtc.com/Recall/V-SC-2021030016.pdf
V-SC-2021030016
J2534 Pass-Thru
| CarDAQ-Plus - PassThru J2534 Vehicle Reflash Hardware |  |
| CarDAQ-M Modular PassThru J2534 Vehicle Reflash Hardware | |
| CarDAQ-Plus 2 | |
| VSI J2534 ECU Reprogrammer | |
| Autel (AULMF2534) MaxiFlash Pro | |
All information in regard to Mercedes-Benz J2534 compliant software is available free of charge and found under the MB Workshop Resources tab on the home page of www.startekinfo.com
J2534 complaint software for Mercedes-Benz vehicles is available for purchase from Mercedes-Benz USA.
In order to use the J2534 complaint software for Mercedes-Benz vehicles, the purchaser must furnish their own:
- Windows based PC or laptop*
- J2534 compliant interface box*1*
*Must be purchased from a third party company and are not available from Mercedes-Benz USA LLC.
*1* suggested listing of J2534 interface boxes is located within the J2534 Pass-Thru User’s Manual which is posted for view without cost under the MB Workshop Resources tab on the home page of www.startekinfo.com
Vehicle Coverage
J2534 complaint software for Mercedes-Benz vehicles has coverage for all required functions associated to reprogramming, initialization, and fault clearing of emission control modules (engine and transmission) fitted to vehicles 2004 Model Year and newer. Additionally all access and functionality required in regard the configuration via SCN Coding and/or CVN Coding is covered.
J2534 complaint software for Mercedes-Benz vehicles is delivered via DVD media which is delivered monthly for the license term of one year upon purchase.
- All control unit software (reprogramming calibrations) is contained within J2534 DVD media.
Terms and conditions
J2534 complaint software for Mercedes-Benz vehicles is purchased in 1-year license increments. During that license term the user will receive an initial software package, license key, SCN/CVN Coding information/access as well as monthly updates via DVD media.
- Additional updates of software after the 1st year can be purchased at additional cost, however are not required for the system to continue functioning.
For pricing and additional information via the internet, please refer to the information at the beginning of this section.
- Advanced Diagnostic Scanner for ECU Programming : MK908P has been designed to perform some of the most complicated engine diagnostics and reprogramming in BMW and Mercedes Benz. With the jbox/J2534 VCI or BMW Ethernet Cable, you can edit the cars performance data, like adjusting RPM, fuel injection, etc. A professional car diagnostics scanner to save time/effort on repairs. Form some of the most complicated engine diagnostics and reprogramming in BMW and Mercedes Benz
- Comprehensive Features : Besides Coding and ECU programming functions, the scan tool supports reprogram keys, Bi-directional control, active test, ABS bleeding, complete capabilities for codes, live data, actuation tests, adaptations, prints out recorded data with Wi-Fi. Warm tips Benz-14 & Chang'an-3 Adapters only for UK version, not US version
- User Friendly : The live data stream displayed the real time PID data from ECU and the displayed data included analog inputs and outputs, digital inputs and outputs and system status information broadcast. The graphic display greatly improved the readability and understandability of above parameters. This is definitely a perfect scan tool for enthusiasts interested in knowing how their car is running
- Easy to Operate : The hardware can equal to a best rank android tablet in the market and that made the whole diagnostic procedure more quickly and precisely. Maxisys platform, cloud-based Maxisys provide a large amount of data about the diagnosis and repair advices, that’s really helpful, whenever you encounter problems, you can find solutions from it
- Compatible with Some Add-ons : Combination with Oscilloscope Maxi Scope MP408 and Digital Inspection Cameras MV108, the power of this tool is amazing and the detail you receive about every component of the vehicle makes pinpointing a problem painless. Affordable combination of MS908P and TS601 supports TPMS programming, which turns into a powerful diagnostic tool.
- 🎉【ECU Programming +Same Functions as Maxisys Elite】Coming with J2534 ECU programming device, Autel MK908P is competent for ECU programming specific BENZ/ BMW. EXACTLY the same functions as Autel MaxiSys Elite, making itself the most cost-effective high-end diagnostic scanner in Autel product line. The 2021 Newest intelligent automotive diagnostic scan tool is specially designed for mid-scale or large-scale workshops and vehicle repairing houses.
- 🎉【Online Functions + Active Test】: There is online coding for VW, Audi, Porsche, Benz, BMW. Online configuration for Renault is unique among diagnostic industries. Besides, Autel MK908P features Bi-Directional Control (Active Test) to request information or command an actuator to perform specific tests, like cycling the a/c clutch on and off, perform an evaporative emissions leak test and more tests to solve the specific repairing work.
- 🎉【All-system Diagnose + 36 Service Functions】: Provided with full-systems diagnosis (ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system, Light system, Wiper System, etc.). MaxiSys Pro MK908P also offers another 36+ service functions to help your repairing work faster, easier, and more professional. These service functions include immo keys/throttle/injecor coding/trans adaption/suspension/tyre retrofit/DPF/brake bleed/oil reset and more.
- 🎉【Common + Luxury Car Makes Coverage】MK908P is designed for repairing store, thus it enjoys extensive coverage for almost all car makes. Firstly, it has a wide range of compatibility for over 80 brands in the US, Europe and Asia. Besides, you have access to the newest model with fast-release software update. Moreover, There are basic diagnostic functions and most service / special functions compatible with Lamborghini, Ferrari, Aston Martin and Maserati etc.
- 🎉【Advanced Hardware + Reliable Service】As the advanced version of MS908P, MS908S, MS908E, MS908PS PRO, Autel MK908P runs much faster with android 4.4 OS, hexa-core processor, KitKat operating system, 2GB RAM & 64GB on-board memory, 10.1 inches LED screen ,20+ adapters and cables. 1-year free update, 12-month warranty, 30-day free return fees, 24-hour after-sales service are offered and promised.
- 🚩🚩【2 Years Free Update, More effective than Autel MK908P/MS908S Pro】Autel MaxiSys Elite 2-year free update version, with the same functions and updated hardware from Autel MS908S Pro/MK908P, priced at $2900, making itself the most cost-effective high-end diagnostic scanner in Autel product line. (MS908S Pro/MK908P+2nd year update fees=$2399+$1295).
- 🚩🚩【Elite-Live Up to Its Name】 As the updated version of Autel MK908P/MS908CV, the MaxiSys Elite is more economical than Ultra which costs you 2000 bucks more. The flagship-product- MaxiSys Elite has equipped with a set of solid hardware such as ✅ Quad-core Processor- NVIDIA Tegra 4, ✅ 2GB RAM & 64GB ROM, ✅ 9.7” Retina display with ✅ 2048X1536 resolution,✅ Android 4.4.4 OS, ✅ 15400mAH battery, etc. We have prepared almost everything just to smooth a path for your vehicle diagnostic process.
- 🚩🚩【ECU Programming & Coding】To bring out your potential and maximize the profit, the MaxiSys Elite has featured two essential functions-ECU Coding & Programming which empowers you to 👍 program the blank ECUs, 👍 match the components, 👍 reflash the second-hand ECUs, 👍 flash the hidden functions. And also, you can pass thru the gateway to access online data, because the Elite is compatible with J2534 interface. 👉NOTE: ONLY SUPPORTED IN U.S. MARKET.
- 🚩🚩【36+ Special Functions & Full-System Diagnosis】The 36+ special functions can help you cope with variety of DTCs as easy as ABC. Here is a list of commonly used special functions, maybe you can find something you’ve been looking for👉: Oil Light Reset, Steering Angle Reset, Injector Coding, ABS Bleeding, TPMS Reset, EPB Reset, Suspension Reset, etc. As for the full-system diagnostic, the Elite allows you to root out the problems hidden in the onboard systems such as👉 PCM, ECM, EPS, PDM, BCM, TPM, SCCM, RADIO, etc.
- 🚩🚩【Online Functions & Active Test】The MaxiSys Elite also provides you with some high-end functions which helps you to pass-thru the gateway to access online vehicle repair data for instance the online coding for VW, Audi, Porsche, Benz, BMW and the online configuration for Renault and so on. To help you to build a bridge to mutual communicate with the onboard systems, the active test can send the orders to ECUs and control the onboard modules such as PDM, SMF, RSM, TCU, etc.
- 👍【SAME AS MK908P & BETTER TECH SUPPORT】 MS908S Pro has EXACTLY the same diagnostics and service functions as MK908P and Autel MaxiSys Elite. Unlike online product MK908P, MS908S Pro is a mature product that has been tested and approved by workshops across US! NOTE: MS908S Pro is for North & South America only, and support English only.
- 👍【J-2534 ECU PROGRAMMING】Autel MaxiSys MS908S Pro is a professional automotive diagnostic scanner that utilizes powerful Cortex A7+A15 six-core processor that can perform OE level all systems diagnostics and various special functions. With J2534 ECU Programming Device included, it is capable of replacing the existing software & firmware and programming new ECUs(PCM, ECM) for specific BMW and Benz.
- 👍【25 SPECIAL FUNCTIONS FOR PROS】 Autel MS908S Pro is an advanced auto scan tools that can perform various special functions: Oil Reset, EPB reset, DPF Regen, ABS Bleed, SAS, Battery Registration, Injector Coding, Power Balance, Crankshaft Variation Learn and etc. NOTE: Special Functions are NOT universally compatible. Pls send VIN to 🚘auteldirect @ outlook . com🚘 to check compatibility before purchase.
- 👍【EXTENSIVE VEHICLE COVERAGE】 MS908S Pro diagnostic scanner computer covers more than 80 US, Asian and European vehicle makes. The scan tool can work on most OBDII-compliant vehicles to locate check engine issues, 80+ makes and models to scan all available systems. For special functions, coverage varies across vehicles, please send VIN number to 🚘auteldirect @ outlook . com🚘 to check compatibility first.
- 👍【HASSLE-FREE PURCHASE】 Autel MaxiSys MS908S Pro car scanner comes with 12 Months FREE software updates and services and is backed by Amazon 30 Day Return Policy. If there are any issues or concerns, please contact us directly via 🚘auteldirect @ outlook . com🚘 for prompt tech support and best after-sales services! Purchase now to solve drivability issues, emission issues and save both time & money.
- 🚐【25 Special Services + 23 Adaption Functions】 : Autel Maxisys MS908CV, the 2021 new version, is a top heavy duty truck scanner with 25 special services (including Oil Reset, Injector Coding, DPF, EPB, ABS, SRS, Suspension, Throttle ...) and 23 adaption functions (including DOC/DPF Instant Replacement Reset, Fuel Pressure Adaptation Reset, Injector CEOM Reset etc.) to meet all your needs.
- 🚐【OE-Level Full Systems Diagnosis】: Auel truck scanner Maxisys 908CV is an affordable choice to compete with OEM scanners with more advanced functions, while less budget. Autel diesel truck scanner 908cv can read DTCs to locate the fault, clear DTCs to turn off the MIL, retrieve ECU information to learn about the details and views live data. Full-system diagnosis can be applied to Ford truck, Toyota bus, Toyota truck, Nissan, Peugeot, Astra, Champion, Bendix, and more to include 80+ makes.
- 🚐【Advanced ECU Coding】: Autel Maxisys cv ms908cv is equipped with advanced ECU coding which allows you to update the vehicle’s computer software to the latest version, or write in adaptive data for certain components after making repairs or replacements. Maxisys 908CV provides hundreds of methods to improve truck’s performance, like drivability, fuel efficiency, etc. Coding function can be perfectly compatible with Citroen, Dodge, Volvo, Gillig, New Flyer, Nova bus, Pierce and etc.
- 🚐【Designed for Commercial Vehicles】: Autel MS908CV performs diagnosis for heavy trucks, light trucks, natural gas vehicles, construction vehicles, and buses and so on, working with more than 80 commercial vehicle brands, ideal for large repair shops and professional mechanics. As the 2021 new version from Autel, with a 1-year warranty and 24-hour tech support, MS908CV can cover more cars and makes sure that you would not run into any difficulties when using it.
- 🚐【Best Investment with Active Test】: 🅰🆄🆃🅴🅻 Truck scanner MaxiSys MS908CV provides direct access to the vehicle-specific subsystems and components, and output commands to the specific solenoid/relay/ switch to precisely locate faults. Its bidirectional control is applicable for rolling up / down a window, turning the fuel pump on and off, cycling the a/c clutch on and off, and helping with an emissions leak test.
- [J2534 COMPLIANT] - The Mastertech II is a J2534-1 and J2534-2 compliant VCI for OEM reprogramming and diagnostic applications
- [FULLY VALIDATED BY TOP 6 OEMS] - Mastertech II has been fully validated to operate with the top 6 OEM reprogramming applications: GM, Ford, FCA, Nissan/Infinity, Honda/Acura, and Toyota/Lexus
- [PRE-CONFIGURED] - The pre-configured wireless and wired connections make it quick and easy to connect to a vehicle from your PC (requires PC compliant with OE specifications and software)
- [RIGHT TO REPAIR] - Supports 'Right to Repair' (R2R) initiatives
- [COMPREHENSIVE KIT] - Kit includes: VCI, WiFi adapters (wireless PC to VCI), J1962 Cable (connect to vehicle), USB cable (connect to PC for firmware updates and setup), and Quick Start Guide
- 【2021 Scanner for Heavy-Duty Vehicles】:Here we present you the Autel Maxisys MS908CV—a high-end diagnostic tool tailored for commercial vehicles such as semi-trucks, light-duty trucks, buses, construction vehicles, agricultural vehicles and supports 80+ brands. The official updates can always keep the scan tool up with the trends so as to meet the needs of workshops and pro mechs. As an official authorized Autel scanner, stick to the old rules, 365 days QA and 24/7 technical support.
- 【25 Special Functions + 23 Adaptation Functions】:Get the right tool, get the things done. In total we’ve packed 25 service functions such as Oil Reset, SAS Rest, ABS Reset, for normal passenger cars and 23 adaption functions such as O2 Sensor Calibration, DPF Regeneration, Fuel Pressure Adaptation, for commercial vehicles. And those functions work perfectly for the 99% of commercial vehicles in the U.S. market for instance Freightliner, Kenworth, Peterbilt, International, Volvo, etc.
- 【ECU Coding & J2534】:Heavy-duty scanner MaxiSys CV empowers you to match modules with components, flash the hidden functions, and customize the OE-settings and it’s compatible with light-duty trucks and semi-trucks such as: Ford F-series, RAM Trucks, Scania, Mercedes, Iveco, etc. The J2534 ECU programming will no longer be a problem once you have the MS908CV in your hands. It acts as a pass-thru device and help you pass-thru the gateway to access the data for coding.
- 【Full-System Diagnostic】:To help you root out the problems hidden underneath the hood, Autel diagnostic scan tool MS908CV can conduct a full-system diagnostic and present you with the full details about DTCs. Here are some on-board system it can dive into, such as Engine, AT, ABS, SRS, IMMO, air conditioning system, steering angle system, air suspension system, etc. Once the diagnostic is complete, you can access further details from waveform data stream or the health status report.
- 【Active Test & Relearning】: Autel Scanner MaxiSys CV is a bridge for you to mutual communicate with on-board modules and conduct active tests to track down the problems. Cylinder deactivation test, on-board electronic components test, cylinder compression test, all of those complex tests can be done with Autel MS908CV. And also the MS908CV can read the injectors QR code and match them with ECU once the replacement is done. There is still a lot more waiting for you to find out.
- 👍【Works with Autel MK908, MS908(S/Pro), MK908P, MaxiSys Elite】Autel J2534 work with these tools to program ECUs on specific BMW/ BENZ for specific functions. ★★NOTE: J2534 CANNOT directly work with these single devices. After you received the J2534, you HAVE TO send us both the S/N(12 digits) of your tablet MS908S(etc.) and J2534. So, technically, Autel engineers can help you bind J2534 with your devices. If need any supports, contact us via: 🚘auteldirect @ outlook. com🚘 !
- 👍Fully compatible with both SAE J2534-1 and J2534-2 reprogramming standards and performs standard Pass Thru J2534 functionality. To check compatibility, please contact🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- 👍Compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar-Land Rover IDS and BMW 3G for OEM diagnostics. To check compatibility, please contact 🚘auteldirect @ outlook . com🚘 directly for satisfaction-guaranteed support!
- 👍Built-In Wireless with advanced networking functions and data storage. Fast performance ensures reprogramming even the newest controllers & Internet upgradable and updatable.
- 👍Attention: 1. After you ordered and received the J2534, please send us both of the S/N(12 digits, at the back of the device) of the J2534 and your MK908(P) /MS908S (Pro)/ Maxisys Elite to us to bind the two device together. 2. The functions are NOT universally compatible. Please send VIN number to 🚘auteldirect @ outlook . com🚘 to check compatibility before your order.
- VXDIAG SVCI J2534 can compatible with SAE J2534-1 and partly compatible with SAE J2534-2. It supports most of vehicle communication protocols and can be used as PassThru device for many dealer level diagnostic software. And it can be used as a ELM327 device also, support most of ELM327 software.
- High speed host communication and Stable host communication. (with RTS/CTS flow control).Host communication is high-speed and stable, keeping the diagnosis smooth. And the programming function requires the original online account .（Not work for the Ford F serial cars, like F150,F250,F350,F450）
- [Switch on the Interface] There is a switch button on the interface. Please do press the switch button for the Module you want enter in. Pressed: works as ELM327 mode Released: works as J2534 mode
- VXDIAG SVCI J2534 is compatible with Ford / Mazda IDS,Only need to do two steps to Installs software. First,Install FVDI J2534 start software,then install the original brand vehicle software,For example, Ford, Mazda.(Before install the software,pls turn off your antivirus software )
- For software installation, please feel free to contact our online customer service.
- VCX is designed on the basis of the latest automotive international standards so that it can support many professional automotive diagnostic applications
- WIFI Version VXDIAG VCX Nano compatible for TOYOTA and Lexus, support both USB connection and WIFI connection, support latest version software, Compatible with varieties protocols. can be very easy to connect various automotive bus to a PC
- OS support both WINDOWS XP and Windows 7, Software support multi-languages: Chinese, English, French, Italian, Spanish, German, ec
- You can download the vxmanager online, if you have any license problem please send us the serial number to extend the license
- One year warranty. Please contact us via order center if you have any problem with software installation
Last update on 2021-10-20 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2021-10-20 / Affiliate links / Images from Amazon Product Advertising API
