“This site contains affiliate links for which OEMDTC may be compensated” |
July 13, 2021 NHTSA CAMPAIGN NUMBER: 21V529000
Adhesive failure may cause the vent portion of the window to detach, increasing the risk of a crash or injury.
NHTSA Campaign Number: 21V529
Manufacturer Jayco, Inc.
Components STRUCTURE, EQUIPMENT
Potential Number of Units Affected 890
Summary
Jayco, Inc. (Jayco) is recalling certain 2019-2021 Anthem, Aspire, Cornerstone, Insignia, Reatta, and Embark recreational vehicles equipped with Hehr 6400 series windows. The adhesive that bonds the vented portion of the window may fail.
Remedy
Dealers will inspect the windows, and replace the vent if necessary, free of charge. Owner notification letters were mailed August 31, 2021. Owners may contact Jayco customer service at 1-800-283-8267. Jayco’s number for this recall is 9903569.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Affected Units:
Entegra Coach
2019-2021 Anthem Class A
2019-2021 Aspire Class A
2019-2021 Cornerstone Class A
2019 Insignia Class A
2019-2021 Reatta Class A
Jayco Motorized
2019-2021 Embark Class A
STEPS:
1. Window Identification per LCI Instructions – Type and Size.
2. Inspect ALL LCI / HEHR 6400 Series frameless windows per LCI Instructions.
a. When Inspection does not find defective adhesive bond:
i.Submit Claim for Inspection ONLY using 9903569A – .4 Hour Labor.
b. When Inspection DOES find at least one location of defective adhesive bond:
i. DO NOT SUBMIT CLAIM AT THIS POINT
ii. Complete Manual Order Form – noting the LCI Part # of full Window Assembly and the LCI part # of Vent(s) found defective that need replaced.
iii. Submit Manual Order Form to compliance@jayco.com for required window vent(s).
iv. Complete repair following LCI Instructions per window type.
v. Submit Claim using Job Code 9903569A – .4 hour labor for the inspection of all windows AND use Job Code 9903569B .5 hour labor per window vent replaced. ONLY ONE CLAIM PER AFFECTED SERIAL NUMBER
LCI Gauge Kit for Recall
NHTSA 21V-529 and TC 2021-440
Lippert components Gauge Kit for Recall #NHTSA 21V-529 and Transport Canada 2021-440 – LCI/ HEHR 6400 series windows.
Dear Valued Dealer and Valued Owner:
Valued Dealer: This Lippert Components Inc. gauge kit part number 2021094575 has been sent to you to perform window inspections associated with NHTSA Recall 21V-529 and Transport Canada recall 2021-440 regarding LCI/Hehr 6400 series windows. Please provide this gauge kit to your dealer’s service manager or the service advisor that performs the scheduled recalls.
Valued Owner: To be pro-active we have provided you with this gauge kit in the event that your dealer performing the recall has not received the gauge kit to do the window inspection. Please take this gauge kit to your scheduled service appointment and provide the service manager or service advisor performing the inspection with the gauge kit.
Sincerely,
Compliance Management
21E047 Hehr 6400 Series Windows Adhesive Failure
SEOCONTENT-START
LCI/HEHR 6400 Series windows – Adhesive bond
Incident:
LCI 6400 Series Frameless Windows – The adhesive bond between the glass and the frame of the LCI 6400 Series frameless windows may fail. Adhesive failure may cause the vent portion of the window to detach.
Affected Units:
Entegra Coach
2019-2021 Anthem Class A
2019-2021 Aspire Class A
2019-2021 Cornerstone Class A
2019 Insignia Class A
2019-2021 Reatta Class A
Jayco Motorized
2019-2021 Embark Class A
Parts:
Please reference LCI Instructions for part #’s of Window Vent that must be replaced per Inspection– Submit Manual Order Form to Compliance@jayco.com
Parts Return Information:
DO NOT RETURN DEFECTIVE VENTS TO LCI OR JAYCO
STEPS:
1. Window Identification per LCI Instructions – Type and Size.
2. Inspect ALL LCI / HEHR 6400 Series frameless windows per LCI Instructions.
a. When Inspection does not find defective adhesive bond:
i. Submit Claim for Inspection ONLY using 9903569A – .4 Hour Labor.
b. When Inspection DOES find at least one location of defective adhesive bond:
i. DO NOT SUBMIT CLAIM AT THIS POINT
ii. Complete Manual Order Form – noting the LCI Part # of full Window Assembly and the LCI part # of Vent(s) found defective that need replaced.
iii. Submit Manual Order Form to compliance@jayco.com for required window vent(s).
iv. Complete repair following LCI Instructions per window type.
v. Submit Claim using Job Code 9903569A – .4 hour labor for the inspection of all windows AND use Job Code 9903569B .5 hour labor per window vent replaced.
ONLY ONE CLAIM PER AFFECTED SERIAL NUMBER
Bulletin Type:
RECALL
Bulletin #(s):
21V-529 U.S. – 2021-440 CANADA
Job Code(s):
9903569A – Inspect ALL window glass
9903569B – Replace Window Vent
Flat Rate(s):
Inspect ALL window glass .4 per Unit
Replace window Vent .5 per window vent
Publication Date:
August 2021
Make(s):
Entegra Coach Class A
Jayco Motorized Class A
Model(s):
Various
Model Year:
2019-2021
***********************************************************************************************************
IMPORTANT SAFETY RECALL
This Notice Applies to Your Recreational Vehicle «vin»
«Owner_name»
«Address»
«City», «State» «Zip»
Dear Valued Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco Inc. has decided that a defect which relates to motor vehicle safety exists in certain Model 2019-2021 Anthem, Aspire, Cornerstone, Insignia, Reatta, and Embark recreational vehicles equipped with Hehr 6400 series windows.
The adhesive bond between the glass and the frame of the LCI 6400 Series frameless windows may fail. Adhesive failure may cause the vent portion of the window to detach, increasing the risk of a crash or injury.
A Jayco dealer will inspect ALL LCI 6400 series windows with a gauge tool for proper adhesive bond strength where the glass meets the frame. If the glass shows evidence of separation (not adhering), replacement window vent(s) is required.
Please contact a Jayco Dealer to schedule an appointment. The Recall Remedy is free of charge. While the inspection of the windows will take approximately 30 minutes, if new glass is required, the dealer must order the glass for later installation.
Note: You will receive an inspection gauge kit: part number 2021094575 in the mail within a few days of this notification. Please take this gauge kit to your scheduled service appointment. If you do not receive the gauge kit before your scheduled appointment, still proceed with the scheduled appointment as we are providing our dealers with the inspection gauge kit as well.
If you had this repair completed prior to receipt of this recall notice, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall.
If you take your recreational vehicle to your dealer on the agreed service date and the dealer does not remedy this condition please contact our Customer Service Department at 800-283-8267. If you are unable to get this safety defect remedied without charge you may want to contact NHTSA. To submit a written complaint contact the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153): or go to https://www.safercar.gov.
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
We certainly regret this inconvenience; however, your safety is our most important priority.
Sincerely,
Compliance Management
Safety Recall: 21V-529
August 2021
Reason for this recall
What we need you to do
Recall Remedy
***********************************************************************************************************
IMPORTANT SAFETY RECALL
«Dealer_name»
«Address»
«City», «State» «Zip»
Dear Valued Dealer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco Inc. has decided that a defect which relates to motor vehicle safety exists in certain Model 2019-2021 Anthem, Aspire, Cornerstone, Insignia, Reatta, and Embark recreational vehicles equipped with Hehr 6400 series windows.
The adhesive bond between the glass and the frame of the LCI 6400 Series frameless windows may fail. Adhesive failure may cause the vent portion of the window to detach, increasing the risk of a crash or injury.
Remedy consists of inspecting ALL LCI 6400 series windows with a gauge tool for proper adhesive bond strength where the glass meets the frame. If the glass shows evidence of separation (not adhering), replacement window vent(s) is required.
Our records show the following unit is affected by this recall, and is part of the current inventory at your Dealership.
<>
Confirm that the unit serial number requires the recall remedy using Unit Management in Jayco Partners. The Instructions for the recall remedy are available under the Case Recall attachments. Case Recall 21V-529 (US) and 2021-440 (CN).
Note: Your service manager will receive an inspection gauge kit: part number 2021094575 in the mail within a few days of this notification. If you do not receive the gauge kit before the customer’s appointment still proceed with the scheduled appointment as we are providing our customers with the inspection gauge kit as well.
Federal law requires the Recall Remedy completed on this unit prior to customer delivery.
If you sold this unit recently, please contact the owner immediately to inform them of this recall. In addition, please register this unit by submitting the Warranty Registration information. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
We certainly regret this inconvenience; however, our Customers’ safety is our most important priority.
Sincerely,
Compliance Management
Safety Recall: 21V-529
August 2021
Reason for this recall
What we need you to do
Recall Remedy
***********************************************************************************************************
*
*
*
*
*
*
*
*
***************************************************************************************
18 Affected Products
Vehicles
MAKE | MODEL | YEAR |
ENTEGRA | ANTHEM | 2019-2021 |
ENTEGRA | ASPIRE | 2019-2021 |
ENTEGRA | CORNERSTONE | 2019-2021 |
ENTEGRA | INSIGNIA | 2019-2021 |
ENTEGRA | REATTA | 2019-2021 |
JAYCO | EMBARK | 2019-2021 |
12 Associated Documents
Defect Notice 573 Report
RCLRPT-21V529-6439.PDF 212.873KB
Recall Acknowledgement
RCAK-21V529-2995.pdf 646.507KB
Recall 573 Report – Amendment 1
RCLRPT-21V529-9872.PDF 213.513KB
Recall 573 Report – Amendment 3
RCLRPT-21V529-9874.PDF 213.512KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V529-8268.pdf 57.333KB
Remedy Instructions and TSB
RCRIT-21V529-0218.pdf 12440.637KB
Recall Quarterly Report #2, 2021-4
RCLQRT-21V529-5179.PDF 211.222KB
Manufacturer Notices(to Dealers,etc)
RCMN-21V529-4618.pdf 197.584KB
Miscellaneous Document – LCI Gauge kit Part Number 2021094575
RMISC-21V529-3061.pdf 219.424KB
Recall 573 Report- Amendment 2
RCLRPT-21V529-2937.PDF 213.508KB
Recall 573 Report- Amendment 2
RCLRPT-21V529-8097.PDF 213.514KB
Recall Quarterly Report #1, 2021-3
RCLQRT-21V529-0601.PDF 211.116KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V529&docType=RCL
- CURES RAPIDLY: Fast-curing adhesive produces rapid results
- EASY AND CLEAN APPLICATION: Formulated as a medium viscosity and non-sag adhesive for easy and clean application
- RAPIDLY PRODUCES HIGH BOND STRENGTH: High bond strength designed for windshield bonding and stationary glass attachment
- MEET REQUIREMENTS: Adhesive properties meet many application demands and strength requirements
- 6 Hour SDAT
- One Component
- Short Cut-Off String
- High Viscosity
- This listing include 2 tube of Sikaflex P2g
- Primerless to glass
- One-component, conventional-cure adhesives
- Automotive Urethane, Adhesive
- A Dow /Dupont Chemical OEM product For use on all auto glass installations
- Ultimate Bonding Strength –– A secure, permanent hold is one application away. This single-component glass repair glue sets the standard for optimal sealing and safety. This glass sealant meets the strength requirements set out by manufacturers for windshield replacement
- Effortless Application –– Get the job done right the first time with this medium viscosity auto glass adhesive that can be loaded into any standard caulking gun. The non-sag properties ensure that the compound doesn't bleed for enhanced control
- Rapid Results –– Add weather-resistant protection that lasts. Tackle your auto glass project today with this quick cure urethane adhesive compound. Use this windshield glue that delivers a secure hold that you can count on
- For Every Auto Glass Project –– From convertibles to RVs, windshields to sidelights, this car window sealant has you covered. Suitable for interior or exterior use, apply this urethane window adhesive for any windshield or stationary glass attachment, including side and backlights
- Complete Convenient Kit –– For professional mechanics to DIY enthusiasts, this set includes what you need to get the job done. This automotive glass adhesive kit comes with nitrile gloves for added personal protection and an application tip to make the process even easier
- 2 Pack | Ultimate Bonding Strength –– A secure, permanent hold is one application away. This single-component glass repair glue sets the standard for optimal sealing and safety. This glass sealant meets the strength requirements set out by manufacturers for windshield replacement
- Effortless Application –– Get the job done right the first time with this medium viscosity auto glass adhesive that can be loaded into any standard caulking gun. The non-sag properties ensure that the compound doesn't bleed for enhanced control
- Rapid Results –– Add weather-resistant protection that lasts. Tackle your auto glass project today with this quick cure urethane adhesive compound. Use this windshield glue that delivers a secure hold that you can count on
- For Every Auto Glass Project –– From convertibles to RVs, windshields to sidelights, this car window sealant has you covered. Suitable for interior or exterior use, apply this urethane window adhesive for any windshield or stationary glass attachment, including side and backlights
- 2 Pack Complete Convenient Kit –– For professional mechanics to DIY enthusiasts, this set includes what you need to get the job done. This automotive glass adhesive kit comes with nitrile gloves for added personal protection and an application tip to make the process even easier
- Primer less to glass
- Fast curing
- One-component and conventional-cure adhesives
- Rely on the moisture in the air to cure.
- Application process is quick and easy
- Minimal odor
- Country of origin: United States
- (2) Tube of Dow / Dupont U428HV (10.5oz 310ml) + (1) 5504GSA Single Use Application Primer Stick 10ml
- Requires 26:1 thrust ratio caulk gun or better to properly dispense - use with wide nozzles - does not fit standard silicone caulk guns.
- Primerless to Glass Urethane - Primer to cover any scratches or for application on bare metal or freshly painted surfaces.
- OEM Quality - BETASEAL U-428HV is crash tested to a minimum drive away time of 4 hours down to 40°F/4.4°C (FMVSS 212). Please consult fixed glass installation guide for more details.
- Professional Use Product* prior use of this product is required - failure to adhere to guidelines may result in improper installation which may include: leaks, air noises, or even serious injury. Seller highly recommends using a certified automotive glass technician.
- Easy to apply, one-component adhesive sealant requires no mixing, fast curing and high bond strength
- Strong power offers a permanent bond, it's conventional-cure adhesive, strong bonds to auto glass to car bodies
- Automotive urethane adhesive sealant, use on all auto glass installations
- Has excellent weathering characteristics and is suitable for use in all climates
- Tough, flexible bonds, retaining strong bonds even during vibration, swelling, or shocking
- Ideal for Windshield Replacement - Our one step primer is perfect for anyone looking to replace a windshield. This single step product is specifically designed to promote adhesion of urethane sealants and adhesives to all automotive glass applications, including windshields. Comes with 2 daubers and a pair of gloves for installation
- Highly UV Resistant - Highly UV resistant, this one step primer helps preserve and protect urethanes, increasing the lifespan of windshield installations. It can also be utilized as a blackout primer to protect against the damage and weakening that UV rays can cause
- Quick Dry, No Activator Needed - This product is a one-part, single step primer that dries quickly and needs no activator. Best applied with included urethane primer daubers. Cures and dries in 10 minutes
- Inhibits Corrosion on Pinchwelds and More - In addition to its applications for auto glass, our one-part primer is perfect for touching up minor scratches on pinchwelds to prevent corrosion and can also be used when priming encapsulated glass and other PVC/encapsulated parts. Also works with PAAS windshield systems
- Brand Name Quality at a Great Value - Our Berkland One Step Primer offers the same quality as the major brand names (based on in-house testing) at a much more affordable price. Compare to PN 08681 and 08682
Last update on 2024-04-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.