| “This site contains affiliate links for which OEMDTC may be compensated” |
May 12, 2021 NHTSA CAMPAIGN NUMBER: 21V345000
Stove Top Burner Flame May Enter Cabinet
A draft can cause the flame to enter the non-sealed cabinet, increasing the risk of a fire.
NHTSA Campaign Number: 21V345
Manufacturer Airstream, Inc.
Components EQUIPMENT
Potential Number of Units Affected 591
Summary
Airstream, Inc. (Airstream) is recalling certain 2020-2021 25RB Flying Cloud, 28RB Flying Cloud, 30RB Flying Cloud, 25RB International, 28RB International, and 30RB International trailers. The stove top range was incorrectly installed in a non-sealed cabinet.
Remedy
Dealers will install panels/baffling in the cabinet to isolate negative airflow and prevent flame inversion, free of charge. Owner notification letters were mailed July 7, 2021. Owners may contact Airstream customer service at 1-877-596-6505 or 1-937-596-6111 ext. 7401 or 7411.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Airstream Recall
Bulletin Number: NHTSA Recall 21V-345
Product Line: Flying Cloud and International
Subject: Furrion Stove Top and Oven Panel Install
Operation code: TTSBR8392100
Labor rate will be: 1.5 hours
It has come to our attention, in certain scenarios, when the Furrion stove top is being used and the furnace turns on, the flames from the stove top burners can be pulled down under the burner. If this should occur, there is a potential for an increased risk of a fire, personal injury and/or property damage. The following steps are to install a back panel, to close off the stove and oven area, to stop the flame from being pulled down from the furnace.
Please contact the Airstream Customer Service Department at 877-344-1076 ext. 7491 if parts are needed. They will be sent at no charge.
RANGE OF VEHICLES INVOLVED:
Airstream’s built between: 5/7/2019 through 5/5/2021
Serial number range: 549415 – 558555
Note: Because our VINs do not run in a contiguous series, there will be units in the VIN range which will not be affected by this Service Bulletin.
Equipment needed:
Drill/driver with a Phillips bit
Box knife
3/4″ wrench
Manometer
Parts Needed:
30 RB cooktop, 30 RB oven, 28RB oven, 26 U oven, 25RB and 23 FB
1 ea. Panel 24-7/8″ x 20-1/8″
2 ea. Wood batts 19½”
4 ea. 1¼” screws
4 ea. ¾” screws
1 ea. Grommet
8′ Foil tape
28 RB and 26 U cooktop
1 ea. Panel 24-7/8″ x 20-1/8″
1 ea. Panel 24-1/8″ x 12-1/8″
2 ea. Wood batts 19½”
2 ea. Wood batts 11″
8 ea. 1¼” screws
8 ea. ¾” screws
1 ea. Grommet
8′ Foil Tape
Note:
You will be getting a panel that will need to be cut to the size listed below depending on which model you have.
The 1″ LP hole and ½” 12 wire hole will need to be drilled into the panel at the measurements listed.
Furrion stove top and oven
Furrion stove top
When using the furnace, the stove top flame should continue to rise from the burners. Without the back of the cabinet closed off the flame may be pulled down into the stove top by the furnace’s air circulation.
To remove the Furrion stove top and oven: Lift up on the back of the folding lid and slide it back so the two tabs in the front pull out of the slots.
Remove the four screws, using a drill/driver, in both sides of the top. On the oven model, open the oven door and remove the two screws, one each side.
Make sure the LP tanks are shut off, and use a 3/4″ wrench to disconnect the LP hose. Then, disconnect the 12-volt wires and remove the stove top and oven.
30RB Stove Top with Oven: Flying Cloud and International
Cut the panel to 24-1/8″ x 19-5/8″ and drill the LP hose hole down 2″ and over 4″ and the 12 volt wire hole up 2″ and over 4 ” like the drawing shows. Cut the two wood batts to 19¼” and install one on each side at the rear of the cabinet, and attach each batt with two 1¼” screws. Insert the LP hose and the 12-volt wires through the holes on the 1/8″ panel, and use four ¾” screws on each side. Next, use foil tape to seal off all corners and sides at the back of the cabinet. Insert the grommet over the LP hose and use two ¾” screws to attach it to the back panel. Measure down from the top of the galley 4¼” on both sides and attach a 16½” wood batt. Install the batt with 1¼” screws, so that the top of the batt is on the measured line. Lay the bottom panel on top of the wood batts and use four ¾” screws to attach the board to the batts. Use foil tape to seal the sides and back of the panels.
30RB Stove Top: Flying Cloud and International
Cut the panel to 24-1/8″ x 3¾” and drill the LP hose hole down 2″ and over 3½” and the 12 volt wire hole down 2″ and over 4 ” like the drawing shows. Cut the two wood batts to 3¼” and install one on each side at the rear of the cabinet, and attach each batt with two 1¼” screws. Insert the LP hose and the 12-volt wires through the holes on the 1/8″ panel, and use four ¾” screws on each side. Next, use foil tape to seal off all corners and sides at the back of the cabinet. Insert the grommet over the LP hose and use two ¾” screws to attach it to the back panel.
28RB Stove Top: Flying Cloud and International
Cut the first panel to 24-1/8″ x 12-1/8″ and drill the LP hose hole down 2″ and over 3½” and the 12 volt wire hole down 2″ and over 4 ” like the drawing shows. Cut the second panel to 24-1/8″ x 16-7/8″ Cut the first two wood batts to 11″ and install one on each side at the rear of the cabinet, and attach each batt with two 1¼” screws. Insert the LP hose and the 12-volt wires through the holes on the 1/8″ panel, and use four ¾” screws on each side. Next, use foil tape to seal off all corners and sides at the back of the cabinet. Insert a grommet over the LP hose and use two ¾” screws to attach it to the back panel. Measure down from the top of the galley 4¼” on both sides and cut the second set of wood batts at 16½” and attach them one on each side.
Install the batt with 1¼” screws, so that the top of the batt is on the measured line. Lay the bottom panel on top of the wood batts and use four ¾” screws to attach the board to the batts. Use foil tape to seal the sides and back of the panels.
28RB Stove Top with Oven: Flying Cloud and International
Cut the panel to 24-1/8″ x 20-1/8″ and drill the LP hose hole down 2″ and over 4″ and the 12 volt wire hole up 2″ and over 12″ like the drawing shows. Cut the two wood batts to 19½” and install one on each side at the rear of the cabinet, and attach each batt with two 1¼” screws. Insert the LP hose and the 12-volt wires through the holes on the 1/8″ panel, and use four ¾” screws on each side. Next, use foil tape to seal off all corners and sides at the back of the cabinet. Insert the grommet over the LP hose and use two ¾” screws to attach it to the back panel.
26U Stove Top and Oven: Flying Cloud
Cut the panel to 24-1/8″ x 20-1/8″ and drill the LP hose hole down 2″ and over 4″ and the 12 volt wire hole up 2″ and over 12″ like the drawing shows. Cut the two wood batts to 19″ and install one on each side at the rear of the cabinet, and attach each batt with two 1¼” screws. Insert the LP hose and the 12-volt wires through the holes on the 1/8″ panel, and use four ¾” screws on each side. Next, use foil tape to seal off all corners and sides at the back of the cabinet. Insert the grommet over the LP hose and use two ¾” screws to attach it to the back panel. Lp hose hole and grommet
26U Stove Top: Flying Cloud
Cut the first panel to 24-1/8″ x 12-1/8″ and drill the LP hose hole down 2″ and over 3½” and the 12 volt wire hole down 2″ and over 4 ” like the drawing shows. Cut the second panel to 24-1/8″ x 17½” Cut the first two wood batts to 11″ and install one on each side at the rear of the cabinet, and attach each batt with two 1¼” screws. Insert the LP hose and the 12-volt wires through the holes on the 1/8″ panel, and use four ¾” screws on each side. Next, use foil tape to seal off all corners and sides at the back of the cabinet. Insert the grommet over the LP hose and use two ¾” screws to attach it to the back panel. Measure down from the top of the galley 4¼” on both sides and cut the second wood batts to 17″ and attach one on each side. Install the batt with 1¼” screws, so that the top of the batt is on the measured line. lay the bottom panel on top of the wood batts and use four ¾” screws to attach the board to the batts. Use foil tape to seal the sides and back of the panels. Lp hose hole and grommet
25RB Stove Top and Oven: Flying Cloud and International
Cut the panel to 24-1/8″ x 19-7/8″ and drill the LP hose hole down 2″ and over 3½” and the 12 volt wire hole up 2″ and over 4″ like the drawing shows. Cut the two wood batts to 19 and attach one on each side at the rear of the cabinet, and attach each batt with two 1¼” screws. Insert the LP hose and the 12-volt wires through the holes on the 1/8″ panel, and use four ¾” screws on each side. Next, use foil tape to seal off all corners and sides at the back of the cabinet. Insert the grommet over the LP hose and use two ¾” screws to attach it to the back panel.
23FB Stove Top with Oven: Flying Cloud and International
Cut the panel to 24-7/8″ x 19-1/8″ and drill the LP hose hole down 2″ and over 4″ and the 12 volt wire hole up 2″ and over 12″ like the drawing shows. Cut the two wood batts to 19½” and attach one on each side at the rear of the cabinet, and attach each batt with two 1¼” screws. Insert the LP hose and the 12-volt wires through the holes on the 1/8″ panel, and use four ¾” screws on each side. Next, use foil tape to seal off all corners and sides at the back of the cabinet. Insert the grommet over the LP hose and use two ¾” screws to attach it to the back panel.
Reinstall the stove top and oven and connect the 12-volt wires. Use a 3/4″ wrench to reconnect the LP hose.
Reinstall the four screws on the stove top and, if it has the oven, reinstall the two screws in the oven front.
An LP drop pressure test will need to be performed since the LP line was disconnected. Use a manometer and connect it to the LP port at the front of the trailer, on the A-frame. Open the LP bottles to pressurize the system and then turn the bottles off. Bleed the propane down to 8″ of water column on your manometer. The system will need to hold the 8″ for a minimum of three minutes.
4 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| AIRSTREAM | FLYING CLOUD | 2020-2021 |
| AIRSTREAM | INTERNATIONAL | 2020-2021 |
7 Associated Documents
Remedy Instructions and TSB
RCRIT-21V345-2437.pdf 5115.8KB
Loading...
Reload document 
Open in new tab
Recall 573 Report – Amendment 2
RCLRPT-21V345-8836.PDF 213.976KB
Loading...
Defect Notice 573 Report
RCLRPT-21V345-1648.PDF 213.508KB
Loading...
Recall Acknowledgement
RCAK-21V345-4791.pdf 694.816KB
Loading...
Recall 573 Report – Amendment 1
RCLRPT-21V345-1202.PDF 213.623KB
Loading...
Recall Quarterly Report #2, 2021-4
RCLQRT-21V345-2120.PDF 211.226KB
Loading...
Recall Quarterly Report #1, 2021-3
RCLQRT-21V345-1962.PDF 211.127KB
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V345&docType=RCL
- 【PORTABLE INDUCTION BURNER】Duxtop induction cooktop uses 110/120V 15 amp electrical outlet–standard in all North American homes. ETL listed and built to North American electrical standards. It is lightweight and compact for easy handling and storage. Portable induction burner is perfect for kitchen, dorm, RV, boats, and etc.
- 【HIGH ENERGY EFFICIENCY】 Choose from 20 preset power levels (100W to 1800W) and 20 preset temperature level settings (100°F to 460°F). With an 83% energy efficiency, induction burner is more efficient than traditional gas or electric stoves. Duxtop portable cooktop is perfect for bringing water to a boil quickly and for all of your cooking needs.
- 【DIGITAL LCD SENSOR】Touch control panel: child safety lock keeps the cooking and timer settings from being accidentally changed once they have been set; fast boil button; keep warm button (for 1-30 minutes at 140°F); up to 10-hour timer button.
- 【COMPATIBLE WITH MAGNETIC COOKWARE】 In order to use this and any other induction stove, you need to use cookware with a magnetic bottom. The auto-pan detection will shut the unit off automatically after 60 seconds if no cookware, or the incorrect cookware is detected. Compatible with induction cookware having a diameter of at least 5 inches, which ensures a large and uniform heated area.
- 【WARRANTY】Although induction itself is a noiseless process, there may be high pitched sounds from the cookware due to multiple layers of metals sandwiched together. Please allow the induction cooker to cool down before cleaning. 2-year manufacturer’s warranty, as well as customer service.
- Requires induction compatible cookware. If a magent sticks well to the bottom of the pan and it is between 5-inches and 12-inches, it should be compatible.
- Duxtop Induction Cooktop uses 120V 15 amp electrical outlet - standard in all North American homes; lightweight and compact for easy handling and storage.
- Digital control panel. Built-in count-down digital timer with 1 minute increments up to 170 minutes; 10 temperature range from 140 °F to 460 °F; 10 power levels from 200 to 1800 Watts.
- With no open flame or heating element, food does not burn-on the glass cooktop so this induction burner is easy to clean—just wipe with a damp towel. Durable 7-blade fan rapidly dissipates heat to ensure a longer product life.
- The auto-pan detection will shut the unit automatically after 60 seconds if no cookware is detected; equipped with diagnostic error message system, low and high voltage warning system; ETL approved.
- Practical and Portable: The highly versatile RapidTherm Induction Cooktop boasts 1800W of cooking power, and many smart features at your fingertips. ETL approved and operating at standard 120V, the lightweight electric cooktop is easy to handle and store and is the ideal size for RV’s, small apartments or anywhere you need an extra cooktop. With no hot coils or open flames, it’s the hassle-free way to create sumptuous dishes.
- Energy-Friendly: The powerful induction burner only heats the diameter of the pan, so no energy is wasted. Plus heat is instant and evenly distributed, cooking your food 50% faster than conventional gas or electric cooktops. Suitable for induction-ready cookware with flat ferrous bases (test with a magnet) such as cast iron, enameled steel, or magnetic stainless steel with base diameter between 4.8”-10.2”.
- Digital Control Panel: Swiftly choose between 4 preset programs: Hot Pot, Slow Cook, Boil and Keep Warm that will automatically switch off after cooking. Or, for maximum flexibility, make use of the 8 temperature levels from 140-460°F (with power range from 1000-1800 Watts), and handy extra-long 4 hour digital timer. Includes durable blade fan for overheat protection.
- Safe And Easy To Use: In order to use this and any other induction stove, you need to use cookware with a magnetic bottom. The auto-pan detection will shut the unit off automatically after 60 seconds if no cookware, or the incorrect cookware is detected. When you need to step away for a minute, use the Pause feature to temporarily stop cooking while locking in your cooking settings. When you’re all done, simply wipe with a damp cloth.
- Superior Quality With Mueller - We are here to offer you only the best quality products designed to make your life easier. If you need any help, please feel free to contact us. Our unparalleled 24/7 live telephone customer support is ready and waiting to assist with anything you need!
- Induction Stove Top: This portable induction cooktop outpaces traditional induction stoves by directly heating the bottom of the pot, minimizing heat loss. This capability caters to diverse cooking requirements, including boiling, steaming, frying, and sautéing.
- Features: This electric cooktop induction cooker has many features; digital LCD, touch sensor, fast boil button, keep warm button. The child safety lock prevents accidental changes to the cooking and timer settings once they've been set.
- 10 Temperature Levels and 10 Power Settings: The induction burner provides you with two cooking options. Easily select your desired temperature ranging from 120°F to 460°F for frying. Adjust the power output from 180 Watts to 1800 Watts in cooking. The LCD control panel offers an optimal viewing angle, ensuring easy reading even from a distance. The blue screen adds a touch of luxury to your kitchen ambiance.
- Compatible with Magnetic Cookware: To utilize this induction stove, as well as any other, you'll require cookware equipped with a magnetic base. The auto-pan detection feature automatically switches off the unit when it detects either the absence of cookware or the presence of incompatible cookware. Suitable for use with induction cookware measuring up to 10 inches in diameter, providing a spacious and evenly heated surface.
- Durable and Portable Design: Crafted for longevity and style. The sleek design adds a modern touch to your kitchen, while the robust construction ensures lasting durability. Compact and lightweight, perfect for small spaces or culinary adventures on-the-go.
- 🥣2-in-1 Induction Cooktop and Griddle: Portable induction cooktop 2 burners with removable cast iron griddle pan can be used either as a replacement for electric indoor grills or as double induction burner. You can enjoy versatile cooking options with a convenient removable griddle pan, making cooking even more versatile, from delicate pancakes to sizzling steaks, perfect for cooking spaghetti, bacon, scrambled eggs,grill etc.
- 🥣2 COOKING ZONES: Using a 120V/1100W (left plate)+1100W (right plate) power supply, portable stove has two separate cooking zones, individual controls has "Knob + Touch" control design for easy cooking of a wide variety of foods and all control operations are easy to understand. When both burners are working by power setting mode at the same time, the maximum power will not exceed 1800W total.
- 🥣Removable Non-stick Griddle: Equipped with a convenient removable griddle pan and rubber handles, catering to various cooking needs. And grill pan provides excellent heat retention and distribution. Barbecue while keeping warm without worrying about food cooling or burning off, reducing smoke by 95 percent for a healthier dining environment.
- 🥣Easy To Clean: The induction burner surface is designed with black polished crystal glass, shiny and resistant. simply wipe with a damp towel. The smooth surface of the all-cast iron grill pan is covered with a non-toxic, non-stick coating that leaves no frying residue and is dishwasher safety.
- 🥣Only for Magnetic Pots and Pans: The induction hot plate works with magnetic induction cookware like cast iron, iron, steel, and enameled iron cookware (diameter is between 4.72 inches to 9.44 inches). You can use a small magnet to test whether the cookware is compatible.
- MAKE ADJUSTMENTS ON-THE-FLY – Want hotter temperature or need to cook it longer? No problem. Simply adjust on-the-fly any time. Starting the cooking process over is not necessary. Gold induction cooktop’s intuitive digital controls are easy to operate, and the response is immediate.
- 51 PRE-PROGRAMMED TEMPS - Select from the 6 convenient preset temperature settings or fine tune your own temperature from 100°F to 575°F in 10°F increments. You can also add or deduct cooking time at any time.
- SHATTER-PROOF CERAMIC GLASS – There are no open flames or hot coils that can cause burns. Unlike the competition, Gold’s heating surface is heavy-duty shatter-proof ceramic glass, which was rigorously tested to withstand intense heat without shattering. It is one of the safest cooktops in the market.
- FAST and EFFICIENT – Gold heats the pot directly transferring 85% to 90% of its electro-magnetic energy to heat energy! Traditional stovetops only convert about 30% of their heat for cooking. Cook faster without wasting energy and money.
- MELT CHOCOLATE - Mastery of the double boilers is not necessary. Simply set the Gold at 120°F; add chocolates into an induction-ready pot; and stir. It will never burn. Even preparing the most delicate sauces like Hollandaise, Beurre Blanc, and Beurre Fondue is no longer daunting.
- 【Ultra-thin】With its sleek 0.9-inch ultra-thin profile, this portable induction cooktop exudes the sleekness of a tablet, making it effortlessly portable and space-saving. Adding a touch of elegance to your kitchen space, it's the perfect blend of fashion and functionality.
- 【Super Fast】Unlike the competition, our induction burner utilizes PURE COPPER coils, greatly enhancing its efficiency. By directly heating pot, it converts 90% of electromagnetic energy into heat! Traditional stoves typically only transfer about 30% of heat for cooking. This means faster cooking, less energy and money wasted.
- 【100W Low-power Heating】Many induction cooktops exhibit unstable heating at low power below 600W, but our cooktop offers reliable 100W low-power heating for stable temperature control. Ideal for Sous-vide, poaching, slow cooking, simmering, keeping warm, and tasks like melting chocolate and butter.
- 【Versatile 10-Power Levels】Induction cooktop has ten adjustable power levels (100W~1200w) that perfect for daily cooking. It can handle various cooking tasks, from melting to boiling, from basic meals to holiday cooking, making it a versatile addition to any kitchen.
- 【User-Friendly】Our countertop burner is designed for ease of use and understanding. Its simple controls and user-friendly interface make your cooking experience more enjoyable. With intuitive buttons and precise touch controls, operation is effortless, ensuring a hassle-free cooking experience!
- MAKE ADJUSTMENTS ON-THE-FLY – Want hotter temperature or need to cook it longer? No problem. Simply adjust on-the-fly any time. No need to start over. Flex’s intuitive digital controls are easy to operate, and the response is immediate.
- 45 PRE-PROGRAMMED TEMPS - Select from the 6 convenient preset temperature settings or fine tune your own temperature from 100°F to 500°F in 10°F increments. You can also add or deduct cooking time at any time.
- PRECISE TEMPERATURE CONTROL – With 45 precise temperatures at your fingertips, you can keep delicate sauces warm at 100°F to grilling a juicy steak with serious grill marks at 500°F.
- SHATTER-PROOF CERAMIC GLASS – The heating surface is heavy-duty shatter-proof ceramic glass. It was rigorously tested to withstand intense heat without shattering. It is one of the safest cooktops on the market.
- SUPERIOR TECHNOLOGY - The slim design of Flex and its patented insulation technology brings the induction heating coils closer to your cookware than the competition for faster & even heating, ensuring no hot or cold spots for optimal cooking experience.
- Induction technology for fast heat-up and consistent heat throughout cooking. Must use with induction-ready cookware
- Dual heat settings: 8 settings on the left burner, 5 settings on the right burner. Dimensions: LWH: 14.25" x 23.5" x 2.5"
- Individual 150-minute timers and ON/OFF switches for each burner
- Heat turns off 30 seconds after pot or pan is removed.UC Cubic Feet: 1.38
- RENEWED - The PIC Flex looks and works like new and has been inspected and refurbished by NuWave using genuine NuWave parts.
- MAKE ADJUSTMENTS ON-THE-FLY – Want hotter temperature or need to cook it longer? No problem. Simply adjust on-the-fly any time. No need to start over. Flex’s intuitive digital controls are easy to operate, and the response is immediate.
- 45 PRE-PROGRAMMED TEMPS - Select from the 6 convenient preset temperature settings or fine tune your own temperature from 100°F to 500°F in 10°F increments. You can also add or deduct cooking time at any time.
- PRECISE TEMPERATURE CONTROL – With 45 precise temperatures at your fingertips, you can keep delicate sauces warm at 100°F to grilling a juicy steak with serious grill marks at 500°F.
- SHATTER-PROOF CERAMIC GLASS – The heating surface is heavy-duty shatter-proof ceramic glass. It was rigorously tested to withstand intense heat without shattering. It is one of the safest cooktops on the market.
Last update on 2024-06-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.