| “This site contains affiliate links for which OEMDTC may be compensated” |
March 18, 2021 NHTSA CAMPAIGN NUMBER: 21V193000
Valve Stem Stabilizer May Loosen
If the valve stem extender rubs on the wheel, it can cause a loss of tire pressure, increasing the risk of a crash.
NHTSA Campaign Number: 21V193
Manufacturer Tiffin Motorhomes, Inc.
Components TIRES
Potential Number of Units Affected 37
Summary
Tiffin Motorhomes, Inc. (Tiffin) is recalling certain 2021 Phaeton recreational vehicles. The valve stem stabilizer can become loose, allowing the valve stem extender to contact the wheel.
Remedy
Tiffin will notify owners, and dealers will replace the valve stem stabilizer, free of charge. The recall began April 22, 2021. Owners may contact Tiffin customer service at 1-256-356-8661. Tiffin’s number for this recall is TIF-114.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Tiffin Recall # TIF-114
March 18, 2021
PowerGlide Chassis Valve Stem Stabilizers
Regarding VIN:
Dear Tiffin Motorhome Dealer,
Tiffin Motorhomes will be issuing a recall on certain 2021 Phaeton Motorhomes built on PowerGlide chassis only. These units will have the floor plan of 40IH or 44OH and will have been built between 01/18/2021 and 03/11/2021. These certain motorhomes have valve stem stabilizers that do not fit the wheel, which could potentially lead to a loss of tire pressure.
This letter is to remind you that according to NHTSA regulations, new motorhomes with open safety recalls cannot be sold until the recall has been repaired by an authorized service center.
Tiffin Motorhomes has a very limited supply of parts on hand to complete the recall. Parts have been ordered but due to delays in shipping, they have not yet arrived. Please call the recall department at 256-356-8661 extension 2176 to check on the availability of parts for any stock units you have that are sold before you are ready to deliver.
We regret any inconvenience this action may cause, but feel certain you understand our interest in motor vehicle safety.
Tiffin Motorhomes
Description: TIF-114 21V-193 VALVE STEM STABILIZER RECALL
PowerGlide Chassis Work Instructions
Effective Date: 3/17/2021
Written by: Eddie Little
Model: PowerGlide Phaeton, 2021 40IH, 44OH
To Remove the old stabilizer and install the new stabilizer please follow these steps.
- Remove TPMS sensor from the inside wheel valve stem extension.
- Check inside tire air pressure.
If below 70 psi have the tire inspected for damage.
- Remove the old stabilizer. The old stabilizer may be pushed through the outer wheel and resting on the valve stem extension in between the inner and outer wheel. Be sure the old stabilizer is removed.
If wear is present:
A) Using a 10mm open end wrench, remove the inner valve stem extension.
B) Install new valve stem.
If no wear is present on the valve stem extension proceed to step 4.
- Inspect inside wheel valve stem extension for wear.
- Install the new valve stem stabilizer. Be sure the new stabilizer is fully inserted into the wheel with flanges overlapping on both sides of the wheel.
- Reinstall TPMS sensor onto valve stem extension.
IMPORTANT SAFETY RECALL
This notice applies to your vehicle, identified by the VIN below
NHTSA Recall # 21V-193
Tiffin Recall # TIF-114
March 22, 2021
PowerGlide Chassis Valve Stem Stabilizers
Dear Tiffin Motorhome Owner or Dealer,
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
Tiffin Motorhomes has decided that a defect, which relates to motor vehicle safety, exists on the following models of motorhomes: 2021 40IH and 2021 44OH Phaeton Motorhomes.
Tiffin Motorhomes has become aware these specific models of motorhomes that are built on the PowerGlide chassis and built between the dates of January 18, 2021 and March 4, 2021 may have incorrectly sized valve stem stabilizers installed.
These specific chassis may have been built with tire valve stem stabilizers that can become loose and dislodge from the wheel which may allow the valve stem extension to come into contact with the outer wheel rim opening. This possible contact may cause damage to the valve stem resulting in a loss of air pressure in the inner tire. A loss of air pressure in the inner tire on a motorhome with a single drive axle may overload the outer tire and increase the risk of a crash.
Drivers may be warned that there is a lack of inner tire pressure by conducting a daily pre-trip inspection which includes checking the tire pressure of all tires. A visual inspection may reveal a stabilizer that is dislocated, damage to the stem extension or the rim and low tire pressure of the inner tire. Drivers may also be able to identify a loss of tire pressure from the tire pressure monitoring system which is installed on these specific coaches. Drivers will get a low tire warning, then a very low tire warning. Both warnings will come with audible alarms and warning messages that will appear on the instrument panel. These alarms should provide adequate time for a driver to safely pull over before a complete loss of air pressure or other issues.
Tiffin Motorhomes will send the owners the correct updated parts along with the work instructions to have the retainers installed. Please take your motorhome to a reputable service center OR dealer of your choice to have this inspection completed and the repairs made if needed. Please allow up to 30 minutes to have this repair completed. This work will be completed at no charge to you, the owner. We have included a return sheet to be submitted by the repairing service center with their claim for payment.
If you do not own the vehicle that corresponds to the vehicle identification number which appears on this Recall Notification, please return the notification to the Tiffin Warranty Department with any information you can furnish that will assist us in locating the present owner. You may also call us at 256-356-8661 ext. 2176 or send an email to jeannie.madden@tiffinmotorhomes.com.
If you are unable to have the defect remedied without charge and within a reasonable time after you tender the vehicle for repair, please contact the Tiffin Warranty Department, at 1-256-356-8661, 8:00 a.m. to 3:30 p.m., Central Time. For US Customers: You may also wish to notify the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington DC 20590, or phone 1-888-327-4236 (TTY: 1-800-4249153): or go to https://www.safercar.gov.
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
We regret any inconvenience this action may cause, but feel certain you understand our interest in motor vehicle safety.
Tiffin Warranty Department
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| TIFFIN | PHAETON | 2021 |
11 Associated Documents
Remedy Instructions and TSB
RCRIT-21V193-7707.pdf 270.566KB
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
RCAK-21V193-6672.pdf 646.931KB
Loading...
Defect Notice 573 Report
RCLRPT-21V193-4805.PDF 213.97KB
Loading...
ISSUED Owner Notification Letter(Part 577)
Loading...
Recall Quarterly Report #1, 2021-2
RCLQRT-21V193-1405.PDF 211.133KB
Loading...
Recall 573 Report – Amendment 2
RCLRPT-21V193-7416.PDF 214.081KB
Loading...
Miscellaneous Document – TIF-114 Dealer Open Recall Document
RMISC-21V193-7448.pdf 113.528KB
Loading...
Recall 573 Report – Amendment 1
RCLRPT-21V193-9926.PDF 214.074KB
Loading...
ISSUED Owner Notification Letter(Part 577)
Loading...
Recall Quarterly Report #2, 2021-3
RCLQRT-21V193-8554.PDF 211.233KB
Loading...
Recall Quarterly Report #3, 2021-4
RCLQRT-21V193-4313.PDF 211.314KB
Loading...
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V193&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
- Alcoa 225392 Valve extension stabilizer kit. Includes two stabilizers and two valve extensions
- High temperature rubber compound stabilizers and durable lightweight chrome metal valve extensions
- Stabilizers fit 22.5 inch wheel with 2.00 inch diameter on center hand hole
- Extensions have a 1 inch collar with an effective length of 5-1/8 inch.
- Replacement 1-piece metal bolt-in valve stems for Class B and C Sprinter motorhomes. Traditionally, adding air to dually tires was difficult which required the use of specially designed air chucks and specially designed air gauges just to get to the valve stem. Not anymore! Duallyvalves are designed to make tire pressure checks and inflation easy on motorhomes. The length of the inner dual valve has been extended to reach the outer dual and the outer stem is curved making it easy to add air. No more braided or rubber extensions No more rubber base valve stems No more crawling around to locate the inner tire valve stem
- Package included: 3x Clamp.
- High quality brass clamp to secure flexible valve extension to steel rims.
- High Temperature resistant.
- Material: Metal.
- Size: 87*16 mm.
- Protective Duable plastic cover stays flexible in Extreem heat and cold
- Valve Core does not get removed from Valve
- Non Pressurized, Presure within the tire will not be lost if damaged or removed
- Eliminates the need for a rim holder, clamp or stabilizer
- Ideal For Inner Duals
- Alcoa 125392 Valve extension stabilizer kit. Includes two stabilizers and two valve extensions
- High temperature rubber compound stabilizers and durable lightweight chrome metal valve extensions
- Stabilizers fit 19.5 inch wheel with 1.50 inch diameter on center hand hole
- Extensions have a 1 inch collar with an effective length of 5-1/8 inch.
- For ALCOA Wheels - For ON-CENTER hole positions only.
- Alcoa 247392 Valve extension stabilizer kit. Includes two stabilizers and two valve extensions
- High temperature rubber compound stabilizers and durable lightweight chrome metal valve extensions
- Stabilizers fit 24.5 inch wheel with 2.375 inch diameter off-center hand hole
- Extensions have a 1 inch collar with an effective length of 5-1/8 inch.
- Alcoa 225393 Valve extension stabilizer kit. Includes two stabilizers and two valve extensions
- High temperature rubber compound stabilizers and durable lightweight chrome metal valve extensions
- Stabilizers fit 22.5 inch wheel with 2.00 inch diameter on center hand hole
- Extensions have a 1 inch collar with an effective length of 5-1/8 inch.
- Alcoa 245392 Valve extension stabilizer kit. Includes two stabilizers and two valve extensions
- High temperature rubber compound stabilizers and durable lightweight chrome metal valve extensions
- Stabilizers fit 24.5 inch wheel with 2.19 inch diameter off-center hand hole
- Extensions have a 1 inch collar with an effective length of 5-1/8 inch.
Last update on 2024-06-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.