| “This site contains affiliate links for which OEMDTC may be compensated” |
February 19, 2021 NHTSA CAMPAIGN NUMBER: 21V099000
Steering Gear Fasteners May Become Loose
Difficulty steering, or the inability to steer in both directions, can increase the risk of a crash.
NHTSA Campaign Number: 21V099
Manufacturer E-One Incorporated
Components SUSPENSION, STEERING
Potential Number of Units Affected 10
Summary
E-One Incorporated (E-One) is recalling certain 2020 Cyclone 2, Typhoon, and Typhoon N vehicles. The steering gear mounting bolts may become loose and back out, resulting in difficulty steering.
Remedy
KME will notify owners, and dealers will inspect the wiring and connections, and replace any incorrect hardware, free of charge. The recall began on April 9, 2021. Owners may contact KME customer service at 1-800-235-3928.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Service Bulletin
Service Bulletin SGM 0121
Date: 2/08/21
REV: B
Subject: Some IFS-FT units may have steering gears that the fasteners may loosen and lose clamp load between the cradle and steering gear.
Applies To: IFS for Fire Truck
VDM Range: 11/27/2019 thru 10/28/2020, excluding units contained at OEM.
Verify with OEM on specific affected units and applicable serial numbers.
Vocation: Fire Truck ER
Labor Allowance: 1.5 Hours for removal, cleaning, application of Nord-Lock washers and reinstallation at specified torque.
Please Read the Entire Bulletin and Reference Manuals D710023 before Proceeding with Any Work. Follow industry standards regarding safety equipment and procedures. Refer any questions to Reyco Granning Field Service/Warranty department via 417-466-1044. (Mark Bachman)
This procedure should be done at latest on the Next Scheduled Service Interval.
Perform the below instructions one fastener on each gear at a time for each of the 14 bolts, using an alternating pattern.
Access to all of the bolts can be achieved by steering the suspension to limiting stops.
Steering gear and steering gear clamp area to be cleaned with brake cleaner or similar solvent to remove oils, greases, and contaminants.
Female holes on steering gear to be cleaned with wire bottle brush or similar to remove contaminants such as, but not limited to, thread locker and oil.
While performing the TSB, inspect steering gear (threads and body), fittings and lines connected to the gear, and pitman arm for damage or leaks and replace or service as necessary.
Ensure proper steering fluid level before returning vehicle to service.
- Remove the single 7/8 in bolt from each steering gear; clean the threads inside the steering gear blind hole.
- Discard the fastener and flat washer and install the Nord-Lock washer on the new fastener.
- Install and torque to 500 lb ft.
- Remove the 10 ¾ in fasteners from each steering gear one at a time and clean the threads and mating holes. See images on following pages.
-
- Access to all bolts may require steering the vehicle from one limit to the other.
-
- Discard the fasteners that directly thread into the steering gear and replace with new fasteners (6 fasteners directly around the output shaft of the gear)
- Discard the flat washer and install the appropriate Nord-Lock washer on the fastener (new fastener if applicable).
- Install the ¾ in fastener (new fastener if applicable) with Nord-Lock washer and torque to 300 lb ft.
- Repeat with the opposite steering gear.
- This procedure applies to both the master and slave gears.
- Labor Allowance: 5 hr. max recommended. Invoice Charge capped at $195.00
For warranty coverage please supply the following info with warranty claim and submit to Reyco Granning.
- Suspension serial number, located on tag at left front of suspension.
- In Service Date
- Repair Date
- Vehicle mileage (if available)
- Invoice #
Parts Required:
2 ea. Reyco Granning Hardware Kit #K715597
Tools Required:
500 ft-lb Adjustable Torque Wrench
Reference
Bolts Used in Steering Gear:
709388-03 3/4-16 X 1.25 GR 8 ZN (outside bottom plate, and side plate bolt)
8223752 3/4-16 X 2.00 GR 8 PO (bottom plate into steering gear) in K715613
709386-01 7/8-14 X 2, GR 8 ZN (bottom plate into steering gear) in K715613
Cradle Side View (Suspension arms removed from view)
WARNING Use jack stands or other safety devices to properly support vehicle
Failure to safely support the vehicle and follow the procedures in this bulletin can lead to property damage and/or personal injury.
February 22, 2021
IMPORTANT SAFETY RECALL: 21V-099
Reyco Granning Independent Front Suspension Steering Gear Mount Bolts
This notice applies to your vehicle VIN: X
UNIT: 1xxxxx
This notice is sent to you in accordance with the requirements of the National Traffic and Motor Vehicle Safety Act.
E-ONE has decided that a defect which relates to motor vehicle safety exists in certain models of the following emergency vehicles manufactured January 2020 to February 2021, equipped with Reyco Granning Independent Front Suspension Steering Gear Mount Bolts:
E-ONE – 2020 Cyclone 2, Typhoon , Typhoon N
WHY IS A RECALL BEING CONDUCTED?
Reyco Granning has learned that Independent Front Suspension (IFS) modules manufactured during the affected timeframe could have Steering Gear Mounting bolts that may become loose. As these fasteners loosen, the performance of the steering system will degrade as the steering gear box is no longer clamped firmly to its mounting plate.
On certain IFS modules manufactured by Reyco Granning during the affected timeframe could have Steering Gear Mounting bolts that may become loose. As these fasteners loosen, the performance of the steering system will degrade as the steering gear box is no longer clamped firmly to its mounting plate. This results in vagueness of steering, vehicle wandering, and potentially limited steering motion as the bolts continue to back out and may come into contact with other portions of the steering mechanism such as the pitman arm. This condition could result in a vehicle crash. Vagueness of steering, vehicle wandering may occur. There was no cause provided.
The affected item is the Reyco Granning Independent Front Suspension Steering Gear Mount Bolts.
WHAT ARE WE DOING ABOUT THE PROBLEM?
Reyco Granning will perform the inspection and repair effort as set forth in their Service Bulletin and is ready to begin that support immediately. It will take approximately 1.5 manhours to repair.
WHAT SHOULD YOU DO?
If you receive this notification, please contact your E-ONE Dealer or E-ONE at 1-352-237-1122 to schedule an appointment to have the repairs performed.
INCLUDED WITH THIS LETTER IS AN OWNER RESPONSE CARD THAT MUST BE FILLED OUT AND RETURNED TO E-ONE IN ORDER TO BE REIMBURSED. Please have your Truck VIN available. After your repair has been completed, please fill in the appropriate information on the enclosed Owner Response Postcard, sign it, and mail it to:
E-ONE, 1601 SW 37th Ave, Ocala, FL, 34474.
If you prefer to contact E-ONE directly, feel free to contact our Customer Service at 1-352-2371122. Please have your Truck VIN available.
WHAT IF YOU NO LONGER OWN THIS E-ONE – 2020 Cyclone 2, Typhoon , Typhoon N?
If you no longer the current owner of the vehicle, please indicate this on the Owner Response Postcard and return the card to E-ONE, 1601 SW 37th Ave, Ocala, FL, 34474.
WHO SHOULD YOU CONTACT IF YOU HAVE FURTHER QUESTIONS OR CONCERNS?
If you have any questions or concerns, please contact E-ONE Customer Service at 1-352-2371122. Please have your Truck VIN available.
If you are the lessor of this vehicle, please forward a copy of this notice to the lessee within ten days to comply with federal regulations
If you have already paid to have your E-ONE – 2020 Cyclone 2, Typhoon , Typhoon N repaired for this condition, you may be eligible for reimbursement of the charges you paid for the repair or replacement of components. To learn more about what you need to do to obtain reimbursement call E-ONE Customer Service at 1-352-237-1122 and instructions will be provided. Please have your Truck VIN available.
If after having attempted to take advantage of this recall you believe you have not been able to have your E-ONE – 2020 Cyclone 2, Typhoon , Typhoon N remedied without charge and within a reasonable amount of time, you may submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave., S.E., Washington, D.C., 20590; or call the toll-free Vehicle Safety Hotline at 1- 888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov.
We apologize for any inconvenience this safety recall may cause, but your safety is our first concern.
Sincerely,
E-ONE, Inc.
February 22, 2021
SAFETY RECALL NOTICE: 21V-099
TO: All E-ONE Dealers
E-ONE has decided that a safety defect exists in certain E-ONE 2020 Typhoon vehicles manufactured from January 2020 through February 2021 equipped with Reyco Granning Independent Front Suspension Steering Gear Mount Bolts. Accordingly, a recall to address this issue is being initiated effective February 19, 2021.
Reyco Granning has learned that Independent Front Suspension (IFS) modules manufactured during the affected timeframe could have Steering Gear Mounting bolts that may become loose. As these fasteners loosen, the performance of the steering system will degrade as the steering gear box is no longer clamped firmly to its mounting plate. This defect could result in Steering Gear Mounting bolts becoming loose. As these fasteners loosen, the performance of the steering system will degrade as the steering gear box is no longer clamped firmly to its mounting plate. This results in vagueness of steering, vehicle wandering, and potentially limited steering motion as the bolts continue to back out and may come into contact with other portions of the steering mechanism such as the pitman arm. This condition could result in a vehicle crash.
Owners will be notified by mail about the recall and will be instructed on what to do. Reyco Granning will perform the inspection and repair effort as set forth in their Service Bulletin and is ready to begin that support immediately. To schedule the repair, contact Adam Kuiken at Reyco Granning at 417-466-1015. It will take approximately 1.5 manhours to repair. There is no cost to owners for this recall.
E-ONE is providing, free of charge, the necessary components and instructions to rectify the issue and will pay labor costs for inspecting and replacing the included components that have not already been replaced during normal maintenance.
Please be reminded that it is a violation of Federal law for you to sell, lease or deliver a new or used 2020 Typhoon equipped with Reyco Granning Independent Front Suspension Steering Gear Mount Bolts covered by this notification until this recall has been performed on these 2020 Typhoon. Substantial civil penalties apply to violations of this law.
Your assistance with this recall is appreciated. Should you have any questions or concerns, please contact E-ONE Customer Service at (352) 237-1122.
Sincerely.
Leroy Stephens
Engineering Manager – APD
(352) 861-5044
lstephens@e-one.com
3 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| E-ONE | CYCLONE II | 2020 |
| E-ONE | TYPHOON | 2020 |
| E-ONE | TYPHOON N | 2020 |
9 Associated Documents
Recall Quarterly Report #2, 2021-2
RCLQRT-21V099-9689.PDF 211.225KB
Loading...
Reload document 
Open in new tab
Defect Notice 573 Report
RCLRPT-21V099-4602.PDF 213.765KB
Loading...
Manufacturer Notices(to Dealers,etc)
Loading...
ISSUED Owner Notification Letter(Part 577)
RCONL-21V099-6629.pdf 161.815KB
Loading...
Recall 573 Report- Amendment 1
RCLRPT-21V099-2471.PDF 213.765KB
Loading...
Recall Acknowledgement
RCAK-21V099-4567.pdf 645.744KB
Loading...
Remedy Instructions and TSB
RCRIT-21V099-0497.pdf 664.605KB
Loading...
Recall Quarterly Report #1, 2021-1
RCLQRT-21V099-2844.PDF 211.123KB
Loading...
Recall Quarterly Report #3, 2021-3
RCLQRT-21V099-4312.PDF 211.306KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=21V099&docType=RCL
- Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
- Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
- Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
- Accessories included: 1/2" Drive 5" long Extension Bar and 1/2" Drive to 3/8" Drive Reducer
- Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
- PRECISION - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate with traceable serial number.
- DURABLE - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- LONG-LASTING - Rust & corrosion protection with our unique and newly invented Electro-Black finish treatment.
- PERFORMANCE - Features an easy-to-read, highlighted yellow print dual-range scale. Identify the markings even in low-light conditions.
- COMFORTABLE - Comes with a reversible ratchet head that drives in both directions and measure torque in a clockwise direction.
- ±3% HIGH PRECISION AND COOL APPEARANCE: 1/2 inch drive torque wrench (10-170ft.-lb/13.6-230.5Nm)has a calibration error range of ±3%, high precision, and comes with a corresponding serial number, which is easy to trace the original data, and you can use it with confidence.Hairich torque wrench not only has superior quality but also has a superior appearance. The classic combination of black and red is fashionable and textured, allowing you to enjoy a visual feast during use.
- PREMIUM MATERIAL AND DURABLE: Experience the ultimate durability and antiskid with the torque wrench. The main body of Hairich torque wrench set is made of chrome vanadium steel alloy, which is more strong and more durable. The head of the inch-pound torque wrench adopts a ratchet design with a reversing device to improve work efficiency. The square knurled handle is made of aluminum titanium alloy, which is ergonomic and comfortable to hold for long-time use.
- DUAL SCALE AND QUICK SETTING: Laser Printed by dual-range（ft-lb and Nm). Our professional torque wrench is easy to read and provides direct unit conversion, When the set torque value is reached, the torque wrench will make an audible and felt click to remind you to stop applying force. Pull down the lock knob and hold it until the torque setting is completed. Release the hand, and the lock knob will automatically rebound back to lock the value.
- ERGONOMIC DESIGN AND POWERFUL: Every design of our industrial torque wrench conforms to ergonomic, easy to handle.72-tooth ratchet, 5° ratcheting arc head, a quick-release button for easy loading and unloading, and an aluminum non-slip handle for excellent grip and control. A recent research review that, 72-tooth ratchets are very professional tooth ratchets, you just only rotate 5 degrees to finish it. Not easy to slip and wear, can be used in small spaces, and is more durable and powerful.
- EASY OPERATION AND SAFETY: Thanks to its bidirectional drive ratchet head, our torque wrench can be measured both clockwise and counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque. Notice: At low Nm settings under 5 Nm the "click" sound can be too light to hear.
- 【High Precision&Quick Reading】: 3/8 torque wrench has high contrast and dual range scale( 5-45 Ft-Lb/6.8-61 Nm),making it clear and easy to read. We have professional torque wrench production technology, and after 20000 tests, the calibration error range of the torque wrench is ± 3%, making it an essential helper for you.
- 【Safe and Reliable Operation】: Equipped with a bidirectional drive ratchet head, torque can be measured clockwise or counterclockwise. When the set torque value is reached, a "click" sound will remind you to stop applying force to prevent damage to the item due to excessive torque.
- 【High Quality and Durable Material】: Made of hardened chromium vanadium steel alloy (Cr-V). At the same time, the bottom buckle tail plug adopts a red anodizing process to improve the product's oxidation resistance during use and enhance surface wear resistance. 72 tooth ratchet head, made of chromium molybdenum steel. High quality materials resist corrosion and are durable.
- 【Quick Torque Setting】: Simple and fast torque setting, pull down the locking knob and hold it down to rotate to the torque you need. Release the hand and the locking knob will automatically rebound to lock the torque value. And the designer referred to the appearance of the flashlight handle and designed a non slip and labor-saving knurled handle, making it more comfortable and easy to hold when using.
- 【Easy to Store and Widely Use】: You will receive the 3/8-inch drive click torque wrench with a sturdy plastic shell storage box, which is very delicate and durable. Torque wrench is suitable nuts and bolts on various occasions, such as bike, motorcycle, car spark, and is the best helper for you🎁. 🔔 And we provide 12 months warranty. If you have any questions, please feel free to contact us.
- 【3Pcs Torque Wrench Set】 The calibration error range is ±3%, each torque wrench has a calibration certificate. The 3-in-1 torque wrench set can meet your different needs. Including 1/4 inch 20-240in.lb, 3/8 inch 5-45ft.lb, 1/2 inch 20-160ft.lb.
- 【Safe & Reliable】 When the 1/2 torque wrench reaches the preset torque value, it makes a clear "click" sound, accompanied by an obvious hand vibration that reminds you no longer to apply force, prevent damage caused. 72-tooth reversible ratchet head, it can be used both clockwise and counterclockwise directions.
- 【Quick Release Button】 This 3/8 torque wrench has a quick release button with which accessories can easily be installed and removed, the accessories can grip and is not easy to fall down. It is more convenient to use. The torque wrench is made of CR-MO with a higher hardness.
- 【Easy to Set】First pull down the locking knob and hold it down and then start setting the desired torque value. Release the hand and the locking knob will automatically rebound to lock the torque value. If you do not use, please set the torque key to the minimal torque value.
- 【Widely Use】The torque wrenches can satisfy you in bicycle, motorcycle, car, truck and wheel screws, wheel nuts and in the device installation, electrical engineering, etc. We provide 12 months warranty. If you have any questions, please feel free to contact us.
- PORTABILITY: Torque wrench 1/2 inch drive has a durable case for portability or storage
- ADDED COMFORT: Bi-material handle for comfort and grip of the 1/2 torque wrench
- HASSLE FREE USE: Locking feature adjusts quick and easily for hassle free use
- QUICK IDENTIFICATION: Scales stamped into housing showing inch and metric torque settings
- Meets or Exceeds ASME Specifications
- 🔧【𝐌𝐢𝐥𝐢𝐭𝐚𝐫𝐲-𝐠𝐫𝐚𝐝𝐞 𝐒𝐭𝐞𝐞𝐥】ETOOLAB torque wrench utilizes military-grade steel as its base material, coupled with professional surface rust protection methods tailored to usage habits. While ensuring user comfort, it enhances product strength, wear resistance, and rust resistance. offers a more comfortable experience and a longer lifespan!
- 👍【𝐄𝐚𝐬𝐲-𝐭𝐨-𝐑𝐞𝐚𝐝】The scale of this 1/2 drive torque wrench is laser-engraved, using a black background with white markings. dinamometrica de 1/2 ensures clear and easy readability of the scale, even in sunlight. With a dual-scale design, users can conveniently read torque values in two different units according to their preferences, without the need for conversion!
- ⚙️【±𝟑% 𝐏𝐫𝐞𝐜𝐢𝐬𝐢𝐨𝐧 & 𝐒𝐢𝐦𝐩𝐥𝐞 𝐋𝐨𝐜𝐤𝐢𝐧𝐠 𝐑𝐢𝐧𝐠】Our torque wrench 1/2 drive meets the high precision standard of ±3% and comes with a traceable serial certificate. You can use it with confidence! Moreover, its graduation ring is tightly locked, with smaller incremental values, ensuring precise and consistent torque output even after multiple uses. This reduces the hassle of frequent adjustments. It is undoubtedly an excellent tool for your work!
- 🔊【𝐋𝐨𝐮𝐝 𝐂𝐥𝐢𝐜𝐤 𝐒𝐨𝐮𝐧𝐝】This torque wrenches has been upgraded to have a louder "Click" sound. We conducted over 25,000 tests to ensure that each product produces a click sound volume of no less than 45dB when the torque value exceeds 34 lbf·ft. When you hear the distinct click sound, it indicates that the preset torque has been reached, signaling you to stop applying force. You no longer need to worry about damaging your mechanical components.
- 💯【𝐔𝐬𝐞𝐫-𝐅𝐫𝐢𝐞𝐧𝐝𝐥𝐲】Our torque wrench set features a 72-tooth dual-directional ratchet head, allowing for easy operation in both clockwise and counterclockwise directions. It is designed with an adjustable locking ring, making it effortless to adjust the preset torque value. Additionally, it includes a quick-release head design, allowing it to replace the wrench head accessories more easily!
- Includes 1-pc. 3/8 in. drive torque wrench; Storage case; Product manual with torque conversion chart
- Wrench emits a click that can be heard and felt when the preset value is reached
- Permanently marked, high-contrast dual-range scale is easy to read, even in low light
- Reversible ratchet head drives in both directions and measures torque in clockwise direction
- Durable all-steel construction has no plastic parts to break or wear out
- Includes 1-pc. 1/4 in. drive micrometer torque wrench (20-200 in.-lb.) with storage case and product manual; 1-pc. 3/8 in. drive micrometer torque wrench (10-80 ft.-lb.) with storage case and product manual; 1-pc. 1/2 in. drive micrometer torque wrench (25-250 ft.-lb.) with storage case and product manual
- Wrenches emit a click that can be heard and felt when the preset value is reached
- Permanently marked, high-contrast dual-range scale is easy to read, even in low light
- Reversible ratchet heads drive in both directions and measure torque in clockwise direction
- Durable all-steel construction has no plastic parts to break or wear out
- 【PRECISION】 - Ships pre-calibrated to +/- 4% accuracy and ready to use. Include calibration certificate . Before shipping, we take 200 times calibration tests to make sure all wrenches performance well .
- 【DURABLE】 - Reinforced ratchet gear head constructed from hardened, heat treated Chrome Vanadium alloy steel.
- 【 RELIABLE & SAFE】: When small torque wrench set torque value is reached, the wrench will emits slight click sound to remind you to stop applying force to prevent overtorque damage to your items.
- 【LONG-LASTING】 - Rust & corrosion protection with our unique and newly invented Chrome finish treatment.
- 【 DUAL-DIRECTION MEASURES & WIDE USE】: The paddle of the mini torque wrench head can adjust the direction of use at any time,so that the wrench can be used both clockwise and counterclockwise directions. More widely used for Installation equipment, Electrical engineering, bicycle/motorcycle maintenance, Product assembly.With a storage box and an instruction manual.
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.