“This site contains affiliate links for which OEMDTC may be compensated” |
October 28, 2020 NHTSA CAMPAIGN NUMBER: 20V662000
Motor In Bedlift System May Fail
If the bed releases unexpectedly from the stowed position while moving, it could contact the driver and possibly block their vision, increasing the risk of a crash and injury.
NHTSA Campaign Number: 20V662
Manufacturer Jayco, Inc.
Components EQUIPMENT
Potential Number of Units Affected 165
Summary
Jayco, Inc. (Jayco) is recalling certain 2021 Vision, Emblem, Vision XL, Alante, Precept, and Precept Prestige recreational vehicles, equipped with a Power Bedlift System. The bedlift motor may fail due to internal gear failure, causing the overhead bunk bed to release from the stowed position.
Remedy
Jayco will notify owners, and dealers will replace the bed motor, free of charge. The recall began November 18, 2020. Owners may contact Jayco customer service at 1-800-517-9137. Jayco’s number for this recall is 9903525.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
20E-074
EUROLOFT BED LIFT MOTOR REPLACEMENT
SEOCONTENT-START
Bedlift System- Defective Motor
Incident:
Motor in the LCI P2K Bedlift System may fail due to internal gear failure, causing the bed to extend from a stowed position.
Affected Units:
2021 Alante M1AS4066-4087 AU4074-4093
2021 Precept M1UG4069-4074, 4077-4090. 4092 UL4052-4055, 4057-4059,4061,4063, 4065-4066, 4070-4071,4073-4075 UV4051-4056, 4058
2021 Emblem M1DH8051-8063 DU8051-8061, 8065
2021 Vision M1AF8066 AS8066-8085 AU8051-8075
2021 Vision XL M1UG8064, 8066-8067, 8070-8072, 8074-8080
Parts Kit:
Parts Kit #: 20V-662
Parts Kit Contents: 1 motor
Jayco’s sole obligation under our limited warranty is to repair or replace defective materials and/or workmanship deemed our responsibility as determined by Jayco in our sole discretion. Jayco reserves the right to use new and/or remanufactured parts or materials of similar quality to complete any work, and to make parts and/or design changes as appropriate without notice to anyone. Jayco designs and/or materials changes are done without obligation to incorporate such changes in previously manufactured product. Jayco makes every reasonable effort to ensure field remedies will not adversely affect performance and/or safety of the unit. This field remedy is not intended to extend to future performance of this RV, or any of its materials, components or parts beyond the standard warranty period. The RV owner’s obligation to notify Jayco, or one of its independent, authorized dealers, of a claimed defect does not modify any obligation placed on the RV owner to contact Jayco directly when attempting to pursue remedies under state or federal law. Jan. 2019.
903 South Main Street • P.O. Box 460 • Middlebury, IN 46540
Bulletin Type:
Safety Recall
Bulletin #(s):
20V-662 US Units
2020-548 CN Units
Job Code:
9903525
Flat Rate:
.8 hour
Publication Date:
November 18, 2020
Make(s):
Jayco
Entegra
Model(s):
Alante, Precept, Precept Prestige
Emblem, Vision, Vision XL
Model
****************************************************************************************************************
IMPORTANT SAFETY RECALL
This Notice Applies to Your Recreational Vehicle
Dear Valued Customer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco has decided that a defect, which relates to motor vehicle safety, exits in certain 2021 Vision, Vision XL, Emblem, Alante, Precept and Precept Prestige Class A motorhomes equipped with a LCI P2K Bedlift system.
The electric motor of the bed lift system may fail which could allow the bed to drop downward from a stowed position until caught by safety straps increasing the risk of injury to occupants and possible crash while driving.
Replace the defective motor of the bedlift system. This remedy is free of charge, and will take approximately 1 hour to complete.
Please contact your Dealer and set an appointment for this remedy.
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
If you had this repair completed prior to receipt of this recall notice, you may be eligible to receive reimbursement for the cost of obtaining a pre-notification remedy of the problem associated with this recall.
If you take your recreational vehicle to your dealer on the agreed service date and the dealer does not remedy this condition on that date or within three (3) days, please contact our Customer Service Department at 800-517-9137. If you are unable to get this safety defect remedied without charge and/or within a reasonable amount of time after contacting your dealer and Jayco customer service, you may want to contact NHTSA. To submit a written complaint, contact the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC 20590; or call the toll-free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153): or go to https://www.safercar.gov.
We certainly regret this inconvenience; however, your safety is our most important priority.
Sincerely,
Compliance Management
Jayco Motorized
Safety Recall: 20V-662
November 18, 2020
Reason for this recall
What we need you to do
Recall Remedy
***********************************************************************************************************
IMPORTANT SAFETY RECALL
Dear Valued Dealer:
This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act.
Jayco has decided that a defect, which relates to motor vehicle safety, exits in certain 2021 Vision, Vision XL, Emblem, Alante, Precept and Precept Prestige Class A motorhomes manufactured with a LCI P2K Bedlift system.
The electric motor of the bed lift system may fail which could allow the bed to drop downward from a stowed position until caught by safety straps increasing the risk of injury to occupants and possible crash while driving
Replace the defective motor of the bedlift system. All pertinent information regarding this recall is available under the Applications > Recalls section of the website.
Our records show the following unit is affected by this recall, and is part of the current inventory at your Dealership.
1JSMEABR2M1AF8066
Before placing an order for the Recall Parts Kit, please confirm the unit serial number requires the Recall Remedy, using CASE RECALL LINES in Jayco Partners. The Instructions for the Recall Remedy are available under the Case Recall 20V-662 (US) and 2020-548 (CN) attachments.
Federal law requires the Recall Remedy completed on this unit prior to customer delivery.
If you sold this unit recently, please contact the owner immediately to inform them of this recall. In addition, please register this unit by submitting the Warranty Registration information. Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days.
We certainly regret this inconvenience; however, our Customers’ safety is our most important priority.
Sincerely,
Compliance Management
Jayco Motorized
Safety Recall: 20V-662
November 18, 202
Reason for this recall
What we need you to do
Recall Remedy
SEOCONTENT-END
6 Affected Products
Vehicles
MAKE | MODEL | YEAR |
JAYCO | ALANTE | 2021 |
JAYCO | EMBLEM | 2021 |
JAYCO | PRECEPT | 2021 |
JAYCO | PRECEPT PRESTIGE | 2021 |
JAYCO | VISION | 2021 |
JAYCO | VISION XL | 2021 |
12 Associated Documents
Recall Quarterly Report #2, 2021-1
RCLQRT-20V662-3824.PDF 211.226KB
Recall Quarterly Report #1, 2020-4
RCLQRT-20V662-7370.PDF 211.127KB
Recall Quarterly Report #3, 2021-2
RCLQRT-20V662-7833.PDF 211.307KB
Remedy Instructions and TSB
RCRIT-20V662-2930.pdf 1738.183KB
ISSUED Owner Notification Letter(Part 577)
RCONL-20V662-3428.pdf 55.402KB
Manufacturer Notices(to Dealers,etc)
RCMN-20V662-5170.pdf 141.824KB
Defect Notice 573 Report
RCLRPT-20V662-2947.PDF 213.531KB
Recall Acknowledgement
RCAK-20V662-3194.pdf 289.028KB
Recall 573 Report – Amendment 1
RCLRPT-20V662-2335.PDF 213.721KB
Recall 573 Report – Amendment 2
RCLRPT-20V662-1798.PDF 213.736KB
Recall Quarterly Report #2, 2021-1
RCLQRT-20V662-1414.PDF 211.225KB
Recall Quarterly Report #4, 2021-3
RCLQRT-20V662-8902.PDF 211.412KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V662&docType=RCL
b
“This site contains affiliate links for which OEMDTC may be compensated” |
- Bed lift Kits are NOT REPLACEMENT SPRINGS. For new installation - Recreational Vehicles Only. No Foam Mattresses
- Order the correct kit for your CURRENT RV BED. Do not order for a "future" mattress upgrade or adding a pillow topper later
- PARTIAL PLATFORM BEDS - measure the inside compartment dimension BEFORE ORDERING.
- Bed lift Kits require installation. WOODWORKING / MECHANICAL SKILLS NECESSARY
- BLK-QUEEN Bed lift kits include mounting hardware, wood blocks and 2 - 20" x 80 lb. gas springs for installing both sides of the RV bed.
- 1. Only compatible with RV and recreational vehicles with storage boxes, the internal size is 24"-30"
- 2. Note: The product needs to be drilled and installed
- 3. Including installation hardware, wood blocks and 2-17" by 80 lb gas springs(432 mm x 352N)
- 4. Not applicable to bunk beds in slide-out beds with fixed base platforms, side load applications or RV beds
- 5. Please confirm whether your model is suitable before buying
- Bed Lift kit for accessing the storage space under most beds in Motor Homes, Fifth Wheels and Travel Trailers. See Ordering Information.
- For RV QUEEN BEDS with oversize residential mattress or standard mattress with heavy pillowtopper. No lightweight RV or lightweight Foam Mattresses (For Lightweight, order Bedlift Queen Lite)..
- Kit includes two 20” x 120 lb gas springs (508mm x 528N), wood spacer blocks, mounting hardware and complete installation instructions.
- WOODWORKING / MECHANICAL SKILLS NECESSARY - Kits require installation
- Kits are NOT REPLACEMENT SPRINGS. See Hatchlift Replacement Springs.
- Queen Heavy Platform Bedlift Kits are designed for heavy queen / pillow top residential mattresses or mattresses with added foam toppers.
- Diy underbed storage kit. Accessible storage under bed utilizing hydraulic lifts
- Easy construction with some wood working experience experience
- Blueprints and all hardware for Building a platform bed include
- For RV Beds with storage compartments 19” - 23” with Lightweight RV or lightweight Foam Mattresses.
- Kit includes two 15” x 40 lb gas springs (381mm x 176N), wood spacer blocks, mounting hardware and complete installation instructions.
- WOODWORKING / MECHANICAL SKILLS NECESSARY - Kits require installation.
- Kits are NOT REPLACEMENT SPRINGS. See Hatchlift Replacement Springs.
- BedLift Kit for accessing the storage space under most beds in Motor Homes, Fifth Wheels and Travel Trailers. See Ordering Information for other sizes.
- RV BedLift kit for accessing the storage space under most beds in Motor Homes, Fifth Wheels and Travel Trailers. See Ordering Information for available sizes
- For RV KING BED with STANDARD Mattress.
- Kit includes two 20” x 100 lb gas springs (508mm x 440N), wood spacer blocks, mounting hardware and complete installation instructions.
- WOODWORKING / MECHANICAL SKILLS NECESSARY - Kits require installation.
- Note: Bedlift Kits are NOT REPLACEMENT SPRINGS. See Hatchlift Replacement Springs.
- RV BedLift kit for accessing the storage space under most beds in Motor Homes, Fifth Wheels and Travel Trailers. See Ordering Information for available sizes
- For RV KING BED with LIGHTWEIGHT RV or LIGHTWEIGHT Foam Mattresses.
- Kit includes two 20” x 80 lb gas springs (508mm x 352N), wood spacer blocks, mounting hardware and complete installation instructions
- WOODWORKING / MECHANICAL SKILLS NECESSARY - Kits require installation. A helper is highly recommended
- Note: Bedlift Kits are NOT REPLACEMENT SPRINGS. See Hatchlift Replacement Springs
- 🛏️【5Ft/152cm Long Bed Storage Lift Kit】IRONWALLS bed lift hydraulic mechanisms can be oriented to open from the side of the bed, or the end of the bed. 5FT length, suitable for sofa bed, full or queen, twin size bed with about 1.5*2M size.
- 🛏️【90KG Large Load Capacity Per Bed Lift Mechanism】The maximum load capacity of per piece of IRONWALLS bed lift mechanism heavy duty is 90kg/198lbs, which is applicable for most of bed board, mattress, sofa weight 110-130kg.
- 🛏️【Durable Steel Material】Made by high quality heavy duty steel, this storage bed lift hardware kit is not easy to break or deform, rust and corrosion resistant, strong & sturdy, can service a long time.
- 🛏️【Professional Pneumatic Pole Technology】This bed storage gas piston lift mechanism adopts two premium pneumatic gas spring poles, provide full-stage damper and excellent sealing effect. Designed for a more convenient, smooth and more effortless lift up.
- 🛏️【Easy To Install】 Coming with 2pcs bed storage lift mechanism, each fully assembled into a one-piece unit for fast & easy installation. Two gas hydraulic pistons provide easy access to your stored items. With this lift storage bed hardware set, you can easily lift up mattress, board of sofa, bed cabinet or bed frame, and greatly make full use of your room.
- ✅20 inch gas strut 150lb - Extended Length A (Center-to-Center):19.7 inch(437mm), Compressed Length B (Center-to-Center): 11.8 inch(300mm), Force 668N/150Lb Per Strut, 2 Struts Per Pair; Package contents: 2 * struts, 4 * L brackets, 4 * nuts, 1 * Installation Instruction;
- ✅20 inch gas shocks 150lb - ARANA 20" 150lb shocks will be suitable for heavy lids, with lid weight between 130-165lbs, side length ≥ 32 inch; Note: DO measure the lid weight to avoid buy wrong items;
- ✅20 inch gas springs - ARANA 20 inch 150lb struts are widely used on the heavy duty indoor/outdoor furniture such as RV bed, murphy bed,garbage box, generator house, trap door, floor hatch door, custom-built window, etc, as long as the lid weight is between 130-165 pounds;
- ✅ About installation & support - Tip: Screws are not included in the package! Once you need any installation guide, welcome to message us for in-time help; if there are any product defects, unfit problem or part missing, 18 months replacement support will be provided if let ARANA know.
- 【Heavy Duty Steel RV Jacks and Stabilizer】: Kohree scissor jack is made of heavy-duty steel with electrophoresis treatment on the surface so that it is sturdy and strong enough to stabilize and level most RVs.
- 【Specification】: Designed with plenty of room for you to stretch the RV scissor jack in 24" maximum height, 4" retracted height, 26" retracted length, and 7.3" width.
- 【2 Way to Use】: The crank handle turns easily to help raise/ lower the camper scissor jack quickly, the power drill (NOT INCLUDED) is more faster. The trailer stabilizer jacks with the smooth tooth gear design of arms ensure straight-line vertical extension and retraction for your RVs.
- 【Application】: 24" RV stabilizing scissor jack 9500lbs with wide bow-tie base to help you keep trailers, RVs, trailers, campers motorhomes, and pop-ups level and stable. Tip: Can be used with Kohree leveling blocks.
- 【What You Will Get】: 2 * Scissor jacks, 1 * crank handle, 1 * drill bit.
Last update on 2024-04-17 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.