“This site contains affiliate links for which OEMDTC may be compensated” |
October 14, 2020 NHTSA CAMPAIGN NUMBER: 20V634000
Incorrect GAWR on Certification Label/FMVSS 120
Incorrect weight rating information on the certification labels could result in potential overloading of the axles, increasing the risk of a crash.
NHTSA Campaign Number: 20V634
Manufacturer Daimler Trucks North America LLC
Components TIRES, EQUIPMENT
Potential Number of Units Affected 53
Summary
Daimler Trucks North America LLC (DTNA) is recalling certain 2020-2021 Western Star 4700 and 4900 and Freightliner Coronado, 108SD and 114SD vehicles. The vehicle certification label contains incorrect information, stating a Gross Axle Weight Rating (GAWR) that exceeds the tire capacity rating. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 120, “Wheels and Rims-Other than passenger cars.”
Remedy
DTNA will notify owners, and dealers will install accurate GAWR labels, free of charge. The recall began November 25, 2020. Owners may contact DTNA customer service at 1-800-547-0712. DTNA’s number for this recall is FL-864.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check for Daimler Trucks North America Recalls
General Information
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division, and wholly owned subsidiary, Western Star Truck Sales, Inc., has decided that a non-compliance defect that relates to motor vehicle safety exists on the vehicles mentioned above.
On certain vehicles, the Gross Axle Weight Rating (GAWR) on the certification label lists an incorrect higher capacity of the tires, which can lead to possible overloading of the tires and increase the likelihood of a crash.
The certification label will be replaced with a new one indicating the correct GAWR for the tires.
IMPORTANT: Advance arrangements are required. When a customer contacts you regarding this Recall, place an order for the certification label.
There are approximately 56 vehicles involved in this campaign.
Additional Repairs
Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns before sale or delivery of a vehicle.
Owners may be liable for any progressive damage that results from failure to complete campaigns within a reasonable time after receiving notification.
Work Instructions
Please refer to the attached work instructions. Prior to performing the campaign, check the vehicle for a completion sticker (Form WAR260).
Replacement Parts
Replacement parts are now available and can be obtained by ordering the kit and/or part number(s) listed below from your facing Parts Distribution Center.
If our records show your dealership has ordered any vehicle(s) involved in campaign number FL864, a list of the customers and vehicle identification numbers will be available on DTNAConnect. Please refer to this list when ordering parts for this recall.
SEOCONTENT-START
Defect Information Report
(Section 573.6)
FL-864
Date of Submission: October 14, 2020
Manufacturer: Daimler Trucks North America LLC
P.O. BOX 3849
Portland, Oregon 97208
Type of Report: ⃝ Safety Defect X Non-Compliance
Vehicle Information
Model Yr. Start: 2020 Model Yr. End: 2021
Make: Freightliner, Western Star
Model: Coronado, 114SD, 4700, 4900, 108SD
Production Dates: Begin: 04/26/2019
End: 03/09/2020
Descriptive Information:
Certification labels on certain vehicles contain a higher GAWR (Gross Axle Weight Rating) than the tire
capacity rating.
Number potentially involved: 53 Estimated percentage of involve with defect: 100%
Defect / Noncompliance Description
For this Defect/Noncompliance:
Describe the defect or noncompliance:
On the affected vehicles, the vehicle certification label contains incorrect information and thus fails to
comply with the requirements of Federal Motor Vehicle Safety Standard No. 120, “Tire Selection and
Rims for Motor Vehicles Other Than Passenger Cars.” The Gross Axle Weight Rating (GAWR), states
20000 lbs, however the tires are rated for lower values.
If a noncompliance, provide the applicable FMVSS:
FMVSS 120
Describe the safety risk:
Incorrect weight rating information on the certification labels could result in potential overloading of the
axles and increase the likelihood of a crash
Chronology of Defect / Noncompliance Determination
Provide the chronology of events leading up to the defect decision or test data for the
noncompliance decision:
Late September 2020, DTNA received dealer feedback during repair for FL-847 of a second label with
incorrect information that was not being replaced. As a result, DTNA reviewed the labeling of the
population that was addressed under FL-847 and found additional labels with the same issue. As a result
of this review, on October 8, 2020 DTNA decided to conduct a voluntary recall for the second label that
was not covered by FL-847.
Identify the Remedy
Describe the defect/noncompliance remedy program, including the manufacture’s plan for
reimbursement.
Vehicles will be updated with accurate GAWR labels. Repairs will be performed by Daimler Trucks North
America authorized service facilities. Details of the reimbursement plan will be included in the owner’s
notification letter.
Identify the Recall Schedule
Describe the recall schedule for notifications:
Customer notification will be made by first class mail using Daimler Trucks North America records to
determine the customers affected.
Planned Dealer Notification Begin Date: 12/12/2020
Planned Dealer Notification End Date: 12/12/2020
Planned Owner Notification Begin Date: 12/12/2020
Planned Owner Notification End Date: 12/12/2020
Manufacture’s identification code for this recall (if applicable): FL-864
DTNA Representative;
Larissa Stoffels
Executive Manager, Vehicle Safety
Compliance and Regulatory Affairs
****************************************************************************************************************
Subject: Tire Rating Labels
Models Affected: Specific Model Year 2020-2021 Freightliner
108SD, 114SD, and Coronado vehicles; Western Star 4700, and
4900 vehicles manufactured April 26, 2019, through
March 9, 2020.
General Information
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division, and wholly owned
subsidiary, Western Star Truck Sales, Inc., has decided that a non-compliance defect that relates to motor
vehicle safety exists on the vehicles mentioned above.
On certain vehicles, the Gross Axle Weight Rating (GAWR) on the certification label lists an incorrect higher
capacity of the tires, which can lead to possible overloading of the tires and increase the likelihood of a crash.
The certification label will be replaced with a new one indicating the correct GAWR for the tires.
IMPORTANT: Advance arrangements are required. When a customer contacts you regarding this Recall, place
an order for the certification label.
There are approximately 56 vehicles involved in this campaign.
Additional Repairs
Dealers must complete all outstanding Recall and Field Service campaigns prior to the sale or delivery of a
vehicle. A Dealer will be liable for any progressive damage that results from its failure to complete campaigns
before sale or delivery of a vehicle.
Owners may be liable for any progressive damage that results from failure to complete campaigns within a
reasonable time after receiving notification.
Work Instructions
Please refer to the attached work instructions. Prior to performing the campaign, check the vehicle for a
completion sticker (Form WAR260).
Replacement Parts
Replacement parts are now available and can be obtained by ordering the kit and/or part number(s) listed below
from your facing Parts Distribution Center.
If our records show your dealership has ordered any vehicle(s) involved in campaign number FL864, a list of
the customers and vehicle identification numbers will be available on DTNAConnect. Please refer to this list
when ordering parts for this recall.
Table 1 – Replacement Parts for FL864
Campaign
Number Part Type Part Description Part Number Qty. per Kit
FL864A OTHER
Certification Label 24-01810-001 1 ea
BLANK COMPLETION STICKER WAR260 1 ea
Table 1
Label Ordering:
• Login to DTNAConnect portal.
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 1
• Under “DTNACONNECT RESOURCES” on the left side of the homepage, expand the “Service and References”
list, and click on “Request for Certification Label or OWI”. See Fig. 1. A page titled “Request for
Replacement Vehicle Documentation” will open.
05/11/2020 f400425
Fig. 1, DTNAConnect Homepage
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 2
05/11/2020 f400426
A
B
C
A. Select “Certification Label
Request”.
B. Enter the VIN. C. Enter the dealer code.
Fig. 2, Request for Replacement Vehicle Documentation
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 3
• Enter the vehicle identification number (VIN), and select “Certification Label Request”. Enter dealer code
in the ‘Company Code’ box. See Fig. 2.
Removed Parts
U.S. and Canadian Dealers, please follow Warranty Failed Parts Tracking shipping instructions for the
disposition of all removed parts. Export distributors, please destroy removed parts unless otherwise advised.
Labor Allowance
Table 2 – Labor Allowance
Campaign
Number Procedure Time Allowed
(hours) SRT Code Corrective Action
FL864A Replace Certification Label 0.3 996-R117A 12-Repair Recall/Campaign
Table 2
IMPORTANT: When the Recall has been completed, locate the base completion label in the appropriate location
on the vehicle, and attach the red completion sticker provided in the recall kit (Form WAR260). If the vehicle
does not have a base completion label, clean a spot on the appropriate location of the vehicle and first
attach the base completion label (Form WAR259). If a recall kit is not required or there is no completion sticker
in the kit, write the recall number on a blank sticker and attach it to the base completion label.
05/11/2020 f400427
A
B
A. Enter “For Recall FL864” in the
text box.
B. Click on “Review”.
Fig. 3, Reason for Certification Label Request
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 4
• Enter the text “For Recall FL864” in the “ADDITIONAL INFORMATION FOR CERTIFICATION LABEL REQUEST”
box below. Then click on “Review”, and submit the request. See Fig. 3.
Claims for Credit
You will be reimbursed for your parts, labor, and handling (landed cost for Export Distributors) by submitting
your claim through the Warranty system within 30 days of completing this campaign. Please reference the
following information in OWL:
• Claim type is Recall Campaign.
• In the Campaign field, enter the campaign number and appropriate condition code (FL864-A).
• In the Primary Failed Part Number field, enter 25-FL864-000.
• In the Parts field, enter the appropriate part number as shown in the Replacement Parts Table and claim
as part type ’OTHER’.
• In the Labor field, first enter the appropriate SRT from the Labor Allowance Table. Administrative time will
be included automatically as SRT 939-6010A for 0.3 hours.
• The VMRS Component Code is F99-999-005 and the Cause Code is A1 – Campaign.
• U.S. and Canada — Reimbursement for Prior Repairs. When a customer asks about reimbursement,
please do the following:
• Accept the documentation of the previous repair.
• Make a brief check of the customer’s paperwork to see if the repair may be eligible for reimbursement.
(See the “Copy of Owner Letter” section of this bulletin for reimbursement guidelines.)
• Submit an OWL Recall Pre-Approval Request for a decision.
• Include the approved amount on your claim in the Other Charges section.
• Attach the documentation to the pre-approval request.
• If approved, submit a based on claim for the pre-approval.
• Reimburse the customer the appropriate amount.
IMPORTANT: OWL must be viewed prior to performing the recall to ensure the vehicle is involved and the
campaign has not been previously completed. Also, check for a completion sticker prior to beginning work.
U.S. and Canadian dealers, contact the Warranty Campaigns Department via Web inquiry at
DTNAConnect.com / WSC, if you have any questions or need additional information. Export distributors, submit
a Web inquiry or contact your International Service Manager.
The letter notifying U.S. and Canadian vehicle owners is included for your reference.
Please note that the National Traffic and Motor Vehicle Safety Act, as amended (Title 49, United States Code,
Chapter 301), requires the owner’s vehicle(s) be corrected within a reasonable time after parts are available to
you. The Act states that failure to repair a vehicle within 60 days after tender for repair shall be prima facie
evidence of an unreasonable time. However, circumstances of a particular situation may reduce the 60 day
period. Failure to repair a vehicle within a reasonable time can result in either the obligation to (a) replace the
vehicle with an identical or reasonably equivalent vehicle, without charge, or (b) refund the purchase price in
full, less a reasonable allowance for depreciation. The Act further prohibits dealers from selling a vehicle unless
all outstanding recalls are performed. Any lessor is required to send a copy of the recall notification to the
lessee within 10 days. Any subsequent stage manufacturer is required to forward this notice to its distributors
and retail outlets within five working days.
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 5
U.S. and Canadian Dealers: To return excess kit inventory related to this campaign, U.S. dealers must submit a
Parts Authorization Return (PAR) to the Memphis PDC. Canadian dealers must submit a PAR to their facing
PDC. All kits must be in resalable condition. PAR requests must include the original purchase invoice number.
Export Distributors: Excess inventory is not returnable.
Copy of Notice to Owners
Subject: Tire Rating Labels
For the Notice to U.S. Customers: This notice is sent to you in accordance with the National Traffic and Motor
Vehicle Safety Act. For the Notice to Canadian Customers: This notice is sent to you in accordance with the
requirements of the Motor Vehicle Safety Act. This is to inform you that your vehicle may be non-compliant with
the requirements of the Motor Vehicle Safety Regulations and that the non-compliance could affect the safety of
a person.
Daimler Trucks North America LLC (DTNA), on behalf of its Freightliner Trucks Division, and wholly owned
subsidiary, Western Star Truck Sales, Inc., has decided that a non-compliance defect that relates to motor
vehicle safety exists on specific Model Year 2020-2021 Freightliner 108SD, 114SD, and Coronado vehicles;
Western Star 4700 and 4900 vehicles manufactured April 26, 2019, through March 9, 2020.
On certain vehicles, the Gross Axle Weight Rating (GAWR) on the certification label lists an incorrect higher
capacity of the tires, which can lead to possible overloading of the tires and increase the likelihood of a crash.
IMPORTANT: Advance arrangements are required for this Recall in order to ensure labels are available for your
vehicle at the dealership.
The certification label will be replaced with a new one indicating the correct GAWR for the tires.
Please contact an authorized Daimler Trucks North America dealer to arrange to have the Recall performed and
to ensure that parts are available at the dealership. To locate an authorized dealer, go to
www.Daimler-TrucksNorthAmerica.com. On the menu tab, select “Contact,” scroll down to “Find a Dealer,” and
select the appropriate brand. The Recall will take approximately one half hour and will be performed at no
charge to you. You may also confirm your vehicle’s involvement in this recall at this URL:
https://dtna-dlrinfo.prd.freightliner.com:48518/VinLookup/vin-module/getVinLookupPage.
You may be liable for any progressive damage that results from your failure to complete the Recall within a
reasonable time after receiving notification.
If you do not own the vehicle that corresponds to the identification number(s) which appears on the Recall
Notification, please return the notification to the Warranty Campaigns Department with any information you can
furnish that will assist us in locating the present owner. If you have leased this vehicle, Federal law requires that
you forward this notice to the lessee within 10 days. If you are a subsequent stage manufacturer, Federal law
requires that you forward this notice to your distributors and retail outlets within five working days. If you have
paid to have this recall condition corrected prior to this notice, you may be eligible to receive reimbursement.
Please see the reverse side of this notice for details.
If you have questions about this Recall, please contact the Warranty Campaigns Department at (800) 547-0712,
7:00 a.m. to 4:00 p.m. Pacific Time, Monday through Friday, e-mail address
DTNA.Warranty.Campaigns@Daimler.com. For the Notice to U.S. Customers: If you are not able to have the
defect remedied without charge and within a reasonable time, you may wish to submit a complaint to the
Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue, SE., Washington, DC
20590; or call the Vehicle Safety Hotline at (888) 327-4236 (TTY: 800-424-9153); or to https://www.safercar.gov.
For the Notice to Canadian Customers: If you wish to submit a complaint about this recall, you can contact
Transport Canada road safety, 80 rue Noel, Gatineau, Quebec J8Z 0A1 or call (800) 333-0510.
We regret any inconvenience this action may cause but feel certain you understand our interest in motor vehicle
safety.
WARRANTY CAMPAIGNS DEPARTMENT
Enclosure
Daimler Trucks
North America LLC Recall Campaign
November 2020
CAMPAIGN #FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 6
Reimbursement to Customers for Repairs
Performed Prior to Recall
If you have already paid to have this recall condition corrected you may be eligible to receive reimbursement.
Requests for reimbursement may include parts and labor. Reimbursement may be limited to the amount the
repair would have cost if completed by an authorized Daimler Trucks North America LLC dealer. The following
documentation must be presented to your dealer for consideration for reimbursement.
Please provide original or clear copies of all receipts, invoices, and repair orders that show:
• The name and address of the person who paid for the repair
• The Vehicle Identification Number (VIN) of the vehicle that was repaired
• What problem occurred, what repair was done, when the repair was done
• Who repaired the vehicle
• The total cost of the repair expense that is being claimed
• Proof of payment for the repair (such as the front and back of a cancelled check or a credit card receipt)
Reimbursement will be made by check from your Daimler Trucks North America LLC dealer.
Please speak with your Daimler Trucks North America LLC authorized dealer concerning this matter.
Daimler Trucks
North America LLC Recall Campaign
November 2020
CAMPAIGN #FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 7
Work Instructions
Subject: Tire Rating Labels
Models Affected: Specific Model Year 2020-2021 Freightliner
108SD, 114SD, and Coronado vehicles; Western Star 4700, and
4900 vehicles manufactured April 26, 2019, through
March 9, 2020.
Label Replacement Procedure – FL864
On certain vehicles, the Gross Axle Weight Rating (GAWR) on the federal motor vehicle safety standard
(FMVSS) certification label lists an incorrect higher capacity for the tires, which can lead to possible overloading
of the tires and increase the likelihood of a crash.
The FMVSS certification label will be replaced with a new one indicating the correct GAWR for the tires.
Freightliner 108SD, 114SD, and Coronado Vehicles
1. Check the base label (Form WAR259) for a completion sticker for FL864 (Form WAR260) indicating this
work has been done. The base label is usually located on the passenger-side door about 12 inches (30 cm)
below the door latch. If a completion sticker is present, no work is needed. If a completion sticker is not
present, continue with the next step.
2. Park the vehicle on a level surface, apply the parking brakes, and shut down the engine. Chock the tires.
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 8
04/08/2020 f080186
1
2
3
4
1. Customer Assistance Label
2. FMVSS Certification Label
3. Noise Emission Label
4. Entry/Exit Warning Label
Fig. 5, Approximate Component Label Location
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 9
3. Open the driver side door and locate the FMVSS certification label Fig. 4 attached to the B-pillar Fig. 5.
08/31/2020 f080199
DAIMLER TRUCKS N.A. LLC
07/15
52,000
23,587 110
120
120
S
S
S
MANUFACTURED BY:
DATE OF MFR:
GVWR/ PNBV- LBS:
GVWR/ PNBV- KG:
THIS VEHICLE COMPLIES WITH ALL
APPLICABLE FEDERAL MOTOR VEHICLE
SAFETY STANDARDS IN EFFECT AT THE DATE
OF MANUFACTURE SHOWN ABOVE.
VEHICLE ID NO:
TYPE: TRUCK/ TRACTOR TT /CT
1FUJGBDV4GLZZ9999
COUNTRY OF ORIGIN: U.S.A.
PSI “S”
COLD
12,000
20,000
20,000
LBS
GAWR/ PNBE
9,072
KGS
GAWR/ PNBE
5,443
9,072
FRONT AXLE:
2ND INT AXLE:
3RD INT AXLE:
4TH INT AXLE:
5TH INT AXLE:
6TH INT AXLE:
REAR AXLE:
1ST INT AXLE:
275/80R22.5(G)
445/50R22.5(L)
445/50R22.5(L)
TIRES
22.5X8.25
22.5X14.0
22.5X14.0
RIMS
COLD
KPA
758
827
827
Fig. 4, Freightliner FMVSS Certification Label Example
NOTICE
NOTICE: Care should be taken while removing the label. Do not damage the paint.
5. Remove the current FMVSS certification label by peeling the clear topcoat label off, and then remove the
white base label.
6. Clean the adhesive residue from the label location.
7. Ensure that the area on the B-pillar is clean and dry, then affix the new FMVSS certification label with the
correct GAWR on it.
8. Affix a new clear topcoat label over the new FMVSS certification label.
9. Clean a spot on the base label (Form WAR259), write recall number FL864 on a blank red completion
sticker (Form WAR260), and attach it to the base label.
11/23/2020 f400429a
COMPONENT LABEL
NOISE LABEL
EMISSIONS LABEL -000 ONLY
SERIAL NUMBER LABEL
CUSTOMER
ASSISTANCE
LABEL
WARRANTY BOOK LABEL
MEXICO CERTIFICATION LABEL
OR
VEHICLE EMISSION LABEL
PRINTS ON INTERMEC
-001/-002 ONLY
CANADA COMPLIANCE LABEL
OR
COMPONENT GWR LABEL
CERTIFICATION LABEL
Fig. 6, FMVSS Certification Label Location, Recall Kit, Freightliner
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 10
4. Locate the new FMVSS certification label. See Fig. 6 for the location of this label on label sheet.
Make sure the VIN on the current FMVSS certification label matches the VIN on the new FMVSS certification
label.
10. If the vehicle was certified by a body builder based on the previous GAWR listed on the FMVSS certification
label, it will need to be recertified by the body builder based on the current GAWR rating.
Western Star 4700 and 4900 vehicles
1. Check the base label (Form WAR259) for a completion sticker for FL864 (Form WAR260) indicating this
work has been done. The base label is usually located on the passenger-side door about 12 inches (30 cm)
below the door latch. If a completion sticker is present, no work is needed. If a completion sticker is not
present, continue with the next step.
2. Park the vehicle on a level surface, apply the parking brakes, and shut down the engine. Chock the tires.
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 11
09/23/2020 f602784
1
2
3
1. Canada Certification Label
2. FMVSS Certification Label
3. Noise Emission Label
Fig. 8, Western Star Driver’s Door B-Pillar Labels
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 12
3. Open the driver side door and locate the FMVSS certification label Fig. 7 attached to the B-pillar Fig. 8.
08/03/2020 f080206
DAIMLER TRUCKS N.A. LLC
04/19
53,220
24,140 120
105
105
S
D
D
MANUFACTURED BY:
DATE OF MFR:
GVWR/PNBV-LBS:
GVWR/PNBV-KG:
THIS VEHICLE COMPLIES WITH ALL
APPLICABLE FEDERAL MOTOR VEHICLE
SAFETY STANDARDS IN EFFECT AT THE DATE
OF MANUFACTURE SHOWN ABOVE.
VEHICLE ID NO:
TYPE: TRUCK/TRACTOR TT/CT
XXXXXXXXXXXXXXXXX
COUNTRY OF ORIGIN: U.S.A.
PSI “S”
COLD
13,220
20,000
20,000
LBS
GAWR/PNBE
9,072
KGS
GAWR/PNBE
5,996
9,072
FRONT AXLE:
2ND INT AXLE:
3RD INT AXLE:
4TH INT AXLE:
5TH INT AXLE:
6TH INT AXLE:
REAR AXLE:
1ST INT AXLE:
11R22.5(H)
11R22.5(G)
11R22.5(G)
TIRES
22.5X8.25
22.5X8.25
22.5X8.25
RIMS
COLD
KPA
827
724
724
CAN ICES-2
/ NMB-2
Fig. 7, Western Star FMVSS Certification Label Example
NOTICE
NOTICE: Care should be taken while removing the label. Do not damage the paint.
5. Remove the current FMVSS certification label by peeling the clear topcoat label off, and then remove the
white base label.
6. Clean the adhesive residue from the label location.
7. Ensure that the area is clean and dry, then affix the new FMVSS certification label with the correct GAWR
on it.
8. Affix a new clear topcoat label over the new FMVSS certification label.
9. Clean a spot on the base label (Form WAR259), write recall number FL864 on a blank red completion
sticker (Form WAR260), and attach it to the base label.
10. If the vehicle was certified by a body builder based on the previous GAWR listed on the FMVSS certification
label, it will need to be recertified by the body builder based on the current GAWR rating.
11/23/2020 f400432a
COMPONENT LABEL
NOISE LABEL
EMISSION LABEL -000 ONLY
SERIAL NUMBER LABEL
WARRANTY BOOK LABEL
CUSTOMER
ASSISTANCE
LABEL
VEHICLE EMISSION LABEL
PRINTS ON INTERMEC
-001/-002 ONLY
CANADA COMPLIANCE LABEL
COMPONENT GWR LABEL
CERTIFICATION LABEL
Fig. 9, FMVSS Certification Label Location, Recall Kit, Western Star
Daimler Trucks
North America LLC Recall Campaign
November 2020
FL864A
NHTSA #20V-634
Transport Canada #2020-481
Page 13
4. Locate the new FMVSS certification label. See Fig. 9 for label location on label sheet.
Make sure the VIN on the current FMVSS certification label matches the VIN on the new FMVSS certification
label.
10 Affected Products
Vehicles
MAKE | MODEL | YEAR |
FREIGHTLINER | 108SD | 2020-2021 |
FREIGHTLINER | 114SD | 2020-2021 |
FREIGHTLINER | CORONADO | 2020-2021 |
WESTERN STAR | 4700 | 2020-2021 |
WESTERN STAR | 4900 | 2020-2021 |
8 Associated Documents
Noncompliance Notice 573 Report
RCLRPT-20V634-7449.PDF 214.627KB
Recall Acknowledgement
RCAK-20V634-1869.pdf 244.915KB
Miscellaneous Document- Defect Information Report
RMISC-20V634-1703.pdf 958.779KB
Manufacturer Notices(to Dealers,etc)
RCMN-20V634-7757.pdf 402.758KB
Recall Quarterly Report #1, 2020-4
RCLQRT-20V634-4260.PDF 211.148KB
ISSUED Owner Notification Letter(Part 577)
RCONL-20V634-3914.pdf 54.444KB
Recall Quarterly Report #2, 2021-1
RCLQRT-20V634-1658.PDF 211.248KB
Recall Quarterly Report #3, 2021-2
RCLQRT-20V634-5053.PDF 211.333KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V634&docType=RCL
- 5 IN 1 DIAGNOSTIC SCANNER: This is an OBDII scanner and 4 systems diagnostic tool. The AUTOPHIX 3210 PRO Bluetooth Auto Scanner not only has OBDII diagnostic function, but can also be used as an ABS/SRS/transmission scanner and check engine code reader. When it is an OBD2 scanner, you can use it to check if your car is ready for annual test via I/M preparation menu. In addition, the built-in DTC library, live data stream, data playback, performance testing and many more such functions are supported by it.
- RELIABLE CAR HEALTH MONITOR: Are you confused when the ABS/SRS/Transmission/Check Engine warning light is blinking? The AUTOPHIX 3210 PRO Bluetooth Scanner will help you to do a thorough scanning and inspecting of your car and find out the root cause, which saves your time and money. Tip:The warning light will be turned off after the problem is solved. Airbag crash/collision data cannot be cleared, even if you replace the airbag with a new one.
- QUICK DIAGNOSIS: The 3210 PRO is the newest 2024 Enhanced 4-System Bluetooth Code Reader that retrieves vehicle information, reads/clears trouble codes, and displays a 4-in-1 live data stream. You'll easily find out what's wrong with your car. In just a few minutes, you'll be in control of your car!
- EXCLUSIVE APP: Are you tired of the following with third party apps? For example: 1.need to download different apps for different cars? 2. require extra download fees? 3. only support a few functions? 4. can only use one of Android and iOS? Now!One AUTOPHIX 3210 PRO Scanner is enough to solve all the above problems. The must-have wireless/bluetooth automotive diagnostic tool/code reader for today's car owners. iPhone iOS, iPad, Android can be downloaded for free without any additional subscription fees.
- ADVANCED DATA FLOW DISPLAY:AUTOPHIX 3210 PRO Bluetooth code reader allows you to graphically display your vehicle's data flow instead of boring text, including engine coolant temperature, engine RPM, vehicle speed, absolute throttle position, control module voltage, etc. You can view different parameter values corresponding to different times. The advanced data streams provide useful information for entry-level professionals and diyers who can troubleshoot vehicle problems quickly and efficiently.
- 🎄【Easy to Use--Work out of box】+【FOXWELL 2024 New Version】 FOXWELL NT604 Elite scan tool is the 2024 new version from FOXWELL, which is designed for those car owners who want to figure out the cause issue before fixing the car problem via scanning the most common systems like abs srs engine and transmission.The NT604 Elite diagnostic tool comes with latest software, which can be used out of box. No need to waste time to download the software first.
- 🎅【Affordable】+【Reliable Car Health Monitor】 Will you be confused what happen when the warning light of abs/srs/transmission/check engine flashes? Instead of taking your cars to dealership, this foxwell scanner will help you do a thorough scanning and detection for your cars and pinpoint the root cause. It will t-urn off the warning light car after the problem is fixed.👉TIPS: Airbag crash/collision data can NOT be cleared even you replace the new airbag.
- 🎄【5 in 1 Diagnostic Scanner】Compared with those auto scanners (50-100), NT604 Elite code scanner not only includes their OBDII diagnosis but also it can be an abs/srs scanner, transmission and check engine code reader. When it’s an odb2 scanner, you can use it to check if your car is ready for annual test through I/M readiness menu. In addition, live data stream, built-in DTC library, data play back and print, all these features are a big plus for it.
- 🎅【Fantastic AUTOVIN】+【No extra software fee】Through the AUTOVIN menu, this NT604 Elite car scanner allows you to get your V-IN and vehicle info rapidly, no need to take time to find your V-IN and input one by one. What's more, the NT604 Elite abs srs scanner supports 60+ car makes from worldwide (America/Asia/Europe). You don’t need to pay extra software fee.
- 🎄【Solid protective case KO plastic carrying bag】+ 【Lifetime update】Almost all same price-level obd scanner diagnostic tool only offers plastic bag to hold on the scanner.However, NT604 Elite automotive scanner is equipped with solid protective case, preventing your obd2 scanner from damage. Then you don’t need to pay extra money to buy a solid toolbox.
- 🎉【2024 Upgraded Ver. of AL519/ ML519/ ML619】Autel develops the brand-new AutoLink AL619 as the advanced ver. of Autel ML519, AL519, AL319, MS309. This AL619 OBD2 scanner can scan ABS & SRS systems, and support 10 Modes of OBD II Diagnostics Function on Worldwide Vehicles to read, erase codes and turn off the MIL, ABS, SRS warning lights so that you can better maintain your car when related malfunctions occur and make your vehicle ready for the annual test.
- 🎉【Accurate ABS/ SRS Diagnostics Functions】The ABS/ SRS diagnostic function is used to retrieve and clear codes from the ABS/ SRS systems. It can read and clear DTCs, show definitions of each code, display live data of multiple sensors in the graph to locate fault causes, and assist home mechanics to do the proper repair and clear ABS & Airbag warning lights. Diagnoses ABS/ SRS system codes on most 1996 and newer major vehicle models. Please email 📩 immoautel @ outlook. com 📩 for help.
- 🎉【All 10 Modes of OBD II Diagnostics Function】The OBD II Diagnostics function is a fast-access option that allows you to carry out a quick test on the engine system of OBD II vehicles. Read Codes, Erase Codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, DTC Lookup, Component Test, Viewing Vehicle Information, Modules Present.
- 🎉【Live Data and Freeze Frame Data】With Live Data functions, Autel AL619 OBD2 diagnostic code reader allows you to view the live PID (Parameter Identification Data) of the vehicle's computer module(s) in text, graph to check the status of various sensors. And Freeze Frame Data enables you to view the vehicle's operating parameters at the moment a DTC is detected. These information will aid the technician by allowing the parameters to be duplicated for diagnostic and repair purposes.
- 🎉【DTC Lookup Feature】Besides showing you the code’s definition while you are reading the diagnostic trouble codes, AL619 features comparably user-friendly DTC Lookup Function which enables you to retrieve the definitions of any error codes from the large database of AL619, saving you from the hassle of wasting time searching definition of every code via Google.
- 2024 Best Choice for ABS Bleeder Scan Tool - Was the brake pedal always slowly sinking down or becoming loose? This abs brake bleeding scan tool will bleed the brake system by cycling the pump and valves to achieve a tight brake pedal. It's the most affordable obd2 scanner with abs auto bleed function you can find. With the clear step by step instruction, even a beginner can use it. Coverage check on FOXWELL official site: Support- Diagnostic Coverage List.
- More Than a Entry Level OBD Scanner, Ideal for Home Mechanics - Based on the NT301 FOXWELL Scanner, NT630 Plus takes OBD diagnostics to the next level by customizing all functions for ABS and SRS systems. This srs abs scanner provides in-depth insights on error code diagnosis, wheel speed sensor live data, airbag circuits and cable connectors monitor, module activation and etc. It's an total game-changer in resolving ABS SRS issues.
- No More Higher End Service than You Needed - One NT630 Plus is enough! This obd2 scanner with abs and srs takes depth diagnosis on Anti-Lock Brake System & Supplemental Restraint System, and also performs daily required resetting services which same priced scanners cannot do. Like Airbag light reset/ SAS(Steering Angle Sensor) adjustment/ Oil light reset and EPB service functions. this car scanner will help the part to operate normally after the faults repaired.
- Also can Work like NT301 - The NT630 Plus abs code reader connect to the OBD2 port directly. It will diagnose all obd2 modules instantly, displays the live data, locates bad sensors and I/M readiness status before the annual inspection. Guides you to do the maintenance work, reduces the potential driving risk and keep a peak performance on the road.
- Complicate? Unreadable? - Intuitive LCD display with clear operate instructions, even a beginner can diagnose the car faults with the NT630 Plus. Ergonomic Touch with anti-collision and anti-slip cover design, comfortable for daily car diagnose work. Unique button press sound will provide the overall tactile and visual experience to notice you a task has been completed or a command has been executed.
- 💻Note: (About UPDATE) ANCEL FX2000 car scanner diasgnostic tool can be used directly as it comes with existed software, You don't need to register or update beforethe first use. It's recommended to update your scanner only when it fails to work on your car, or it's slow to load all menus or if you need newer software version. 📢Software update supports WIN XP, 7, 8, 10 operation systems only., but not for Mac and ios system.
- 🔧【PLUG AND PLAY - EASY TO USE】 : ANCEL FX2000 car scanner only takes 3 steps to connect to the car for diagnosis without cumbersome operations. The latest FX2000 scan tool is equipped with a one-key diagnosis function, which can automatically identify the model and year of your car, and automatically diagnose the car. Even beginners can use it to read the data and find out what the fault codes mean.
- 🚗【FULL OBD-LEVEL DIAGNOSTICS TOOL】: Quickly determines the cause of engine system faults, reads current, permanent and pending codes. After the repair, clears the codes and turns off the warning light. In addition, the FX2000 engine code reader also displays important OBD II advanced data such as fuel, live data and other manufacturer-specific parameters in real time to ensure that the engine ECU is operating correctly and safely, saving vehicle owners a lot of time and money in maintenance.
- 🚙【TRANSMISSION FAULT DIAGNOSTIC TOOL】: Some noises come from the transmission? Ancel obd2 scanner will read fault codes, display live transmission system data (fluid temperature, fluid pump, clutch actuation, pressure, etc.), and ensures transmission performance is optimal for vehicle speed and load. It provides detailed TCM data of the vehicle, so you can quickly and accurately find existing or potential problems.
- 🚐【FIND OUT SRS WRONG】: ANCEL FX2000 automotive scanner is able to read and clear fault codes in the SRS (airbag) and turn off the warning light to make sure the system is working correctly and safely. This odb2 scanner also displays a live graphical data stream of the supplemental restraint system (air bag), which allows you to analyze and verify that the air bag system is working properly.
- 【Buy with Confidence】 As a America's No.1 diagnostic tool brand, Innova stands for innovation, quality, and accessibility in the automotive diagnostic industry. We are known for developing cutting-edge diagnostic tools that are user-friendly, reliable, and made for US by Americans.
- 【Unleash Your Drive's Potential】Much more than a car code reader, the 6100P scanner effectively reads and erases engine, ABS, SRS, and transmission codes for popular US car makes such as Ford, Chevy, Dodge, GM, etc. When the traction light is constantly on, the ability to really detect where the problem is concerning brakes and airbags enables you to make sure all safety measures in place before putting yourself in harm's way.
- 【Your Car's Health Doctor】Easily view procedures or send commands for oil change, mileage or driving time reset for most 1996 and newer OBD2 vehicles. It also monitors your oil level and oil life status, ensuring optimal vehicle health.
- 【alternator Test】The Innova 6100P scanner is perfect for assessing the performance of the alternator in your hybrid, car, SUV, minivan, or light truck diesel as well. During rough winters and scorching summers, this diagnostic tool will be invaluable when trying to root out start-up issues.
- 【Drive with Confidence and Peace】Quickly identify if your vehicle needs immediate attention with our Code Severity Levels function. This feature helps you understand whether you need to fix an issue immediately or if it can wait until you get home, keeping warning lights at bay.
- [Transform Your Car Care Experience] - With BLCKTEC, instantly become your own professional mechanic. Effortlessly read and clear your car’s trouble codes and check engine light, ensuring your vehicle stays in top condition.
- [Empower Yourself with Comprehensive Diagnostics] - Unlock the full potential of your vehicle with the BLCKTEC 430. Access detailed diagnostics previously exclusive to professional mechanics’ OBD2 scan tools, including ABS, Airbag, SRS, TPMS codes, and beyond, right at your fingertips.
- [Drive with Confidence] - The BLCKTEC 430 is more than just a car code reader; it's your personal vehicle health advisor. Receive tailored repair reports with potential causes and verified solutions for your specific make and model, guiding you to the right fix every time.
- [Seamless Connectivity, Ultimate Convenience] - Experience the freedom of wireless diagnostics with this portable car scanner. Easily connect via Bluetooth to our intuitive sensor, and enjoy all the functionalities of high-end scan tools without the clutter of wires, directly from your smartphone or tablet.
- [DIY Repairs Made Easy] - Navigate car maintenance with ease using our premium app. Access a vast library of easy-to-follow repair videos, guiding you through each step of the repair process, compatible with both iOS & Android devices.
- [ABS & SRS Scanner with Active Test] The ABS/ SRS diagnostic tool Read & clear DTCs, displays live data in a graph to locate the cause of faults and assists the home mechanic with repairs and clearing ABS and airbag warning lights. Active test sensors, valves or solenoids etc. and tracks any threats in real time. It is invaluable to have a diagnostic tool with Active Test feature that you will never find on similar ABS/ SRS scanners.
- 【3 HOP Reset Services 】Easy to set up 3 regular reset services for Oil Light, Battery Management System, and Steering Angle Position. With this obd2 scanner, you can reset the oil service light and reset pre-programmed mileage intervals for energy efficiency; adjust or reset the steering angle position to keep steering aligned; and clear the original low battery fault information. No need to leave home for shop-quality car maintenance.
- 【All OBD2 Test Modes 】 This ABS & SRS scan tool is also a full featured obd2 code reader, allowing a quick test of the engine system of OBD II vehicles, can Read/Clear engine light codes, Live Data, Freeze Frame, Retrieving I/M Readiness Status, O2 Monitor Test, On-Board Monitor Test, Evap Test, Read Vehicle Information, and help pass smog test for most post-1996 OBD2/CAN vehicles.
- [DTC LookUp Library] Can't read the code? Go to the DTC LookUp Library. The Topdon AL600 OBD2 scanner offers a wealth of code definitions so you don't have to look them up in a list or database, and the HELP function takes you to diagnostic tips for possible fixes, saving time searching for repair materials online. No other scan tool or code reader under $100 offers this level of assistance.
- [User-Oriented] You'll love the feel of this automotive scanner, with black rubber grips all around the outer edges for durability and to withstand accidental drops. With its easy access menu, you can operate all functions in minutes with just a few button presses. The 3-color LEDs give you a intuitive indication of the OBD2 test results in a second. 3 shortcut keys, one key to read/clear DTCs and a one-touch smoke status check make it easy to use even for beginners.
- 🔥【Easy to use and friendly】+【Faster diagnostic speed】 FOXWELL NT604 is the 2024 newest enhanced 4 system code reader, which is capable of reading/clearing fault codes, retrieving vehicle information and displaying 4-in-1 live data stream. You will easily find what's wrong with your car to avoid expensive trip to dealership. At the same time, this car scanner will directly tell you what the corresponding code means, avoiding the hassle of searching for information.
- 🛠【OBD2 Full Function】+【Check Engine/ABS/SRS/Transmission】 This scan tool will allow you to perform full OBDII diagnostic for all cars with OBDII protocols. You can use it to check if your car is ready for annual testing through the I/M Readiness menu. In addition, the device also has value-added functions such as real-time data flow, DTC Lookup, data playback, and printing. Turn off Check Engine/ABS/SRS/Transmission Light. Tips: the fault code can be only erased after the problem is fixed.
- 🚗【Cover 10000+ models &60+ Car Makes】 and 【AUTOVIN】 Compared with Other scanner which only supports 40 car makes, NT604 car diagnostic scanner for all cars contains more than 60 car brands and 10000+ cars for almost all OBDII cars sold worldwide like passenger car, SUVs, minivans, light-duty trucks, etc. produced by Asian, European, American with the supported year differing from 1996 to 2024. It allows you to get your VIN and vehicle info rapidly, no need to take time input one by one.
- 🛒【Battery Voltage Checker】+【Lifetime Free Update, No Subscription fee 】 It monitors the real-time voltage of the vehicle battery and displays it in graphical and textual form, informing you of the health status of the battery. Also monitor the health of your car. NT604 is equipped with the latest software directly, so you don't need to download a bunch of updated software after unboxing to use it. Lifetime no subscription fee for upgrading software.
- 🎁【Great festival Idea:Applicable for Many People】+【High End and Exquisite Protective Packaging】 Best one item for Dad, Husband, Boyfriend, Handy Men. Every car owner will need a 4 systems diagnostic scan tool! This code reader fits for home mechanic, DIY car owners, advanced hobbyiest, car dealer, auto repair shop, automotive engineer, diagnostic tech, automobile tech, individual. Apparently, this is the most economical scan tool for every mechanic.
- [OBD2 Scanner] The TOPDON OBD2 scanner performs all ENG/AT/SRS/ABS diagnostics with 4-in-1 graphic live data. 🚩It covers all OBD2 tests for 67 manufacturers and 10000+ model. It also features 5-second one-touch AutoVIN, 🚩a free one-touch lifetime upgrade through WiFi, library DTC, 12 languages, 🚩printable auto-generated report with email sharing, 🚩smooth Android 11.0, 32GB ROM, 🚩vivid 5-inch touchscreen, and up to 10 hours of battery life.
- [4 Car System Code Reader] The TOPDON OBD2 scanner accesses 4 systems: 🚩Engine/ABS/SRS/Transmission. It identifies the ECU version, pull DTCs with 4-in-1 graphic live data and DTC explanation to identify issues, erase DTCs to turn off the warning lights after repair (For cars made in 2005 and newer). In order to help you extend the lifespan of your vehicle while improving performance, this code reader also includes all obd2 test modes to solve the major concerns for all vehicles.
- [User-Oriented TOPDON OBD2 Scanner] With this scan tool's touchscreen and rubberized buttons, you may easily navigate through menus or process while following a logical path. With 32GB on-board memory, the scanner enables for the recording of several diagnostic reports, which can be shared via email and printed for review. Along with this, you can 🚩upgrade your software for free for lifetime with one-touch over Wi-Fi for that help update the features and expanding car coverage.
- [Multiple Functions] The Smart AutoVIN of this TOPDON OBD2 scanner keeps track of your manual selections for vehicle make, model, and year and directs you to the suitable diagnostics. 🚩Max 4 Live Data streams integrated for much easier data processing. Diagnostic feedback online with this diagnostic tool to help you get tough repair operations well-completed. Real-time car battery voltage monitoring identifies probable vehicle defects.
- [Wide Coverage] With its multilingual menu and 🚩coverage of 67 car brands and 10,000+ models spanning North America, Europe, and Asia (including Malaysia, India, and Iran), this car scanner is compatible with the majority of 1996 and newer OBDII compliant automobiles (EN, FR, ES, DE, IT, RU, PT, JP, KR). Before buying, make sure the OBD2 scanner is compatible with your vehicle. The package contains only a charging cable and not a power adapter.
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.