| “This site contains affiliate links for which OEMDTC may be compensated” |
August 21, 2020 NHTSA CAMPAIGN NUMBER: 20E058000
Electronic Control Center Circuit Board may Short
If too much voltage is applied to the unit and the circuit board becomes damaged, there would be an increased risk of a fire.
NHTSA Campaign Number: 20E058
Manufacturer Firefly Integrations, LLC
Components EQUIPMENT
Potential Number of Units Affected 2,487
Summary
Firefly Integrations, LLC (Firefly) is recalling certain Multiplex G9 units used for controlling equipment and accessories in motorhomes. These units can fail if excessive voltage is applied, causing the components on the board to become damaged.
Remedy
Firefly has notified the RV manufacturers that purchased the affected multiplex units and dealers for those RV manufacturers will add an additional circuit module to the existing component board to provide reverse polarity and over-current protection. Owners may contact Firefly customer service at 1-574-825-4600.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Please be reminded of the following requirements:
Please be reminded that under 49 U.S.C. § 30112(a)(3), it is illegal for a manufacturer, to sell, offer for sale, import, or introduce or deliver into interstate commerce, a motor vehicle or item of motor vehicle equipment that contains a safety defect once the manufacturer has notified NHTSA about that safety defect. This prohibition does not apply once the motor vehicle or motor vehicle equipment has been remedied according to the manufacturer’s instructions.
We understand that Firefly may not be able to file the required recall completion rate reports since Firefly will not be doing the repairs directly.
G9 Protection Module – Installation Instructions
The following service technician instructions are for the installation of the G9 Protection Module to comply with the National Highway Transportation Safety Association (NHTSA) product safety recall. The G9 Protection Module will provide overvoltage protection for the G9 Electronic Control Module (ECM).
G9 Electronic Control Module (ECM)
G9 Protection Module
The G9 Protection Module is to be installed onto the G9 ECM with the following two steps:
Step 1 – Access the G9 ECM
Step 2 – Install the G9 Protection Module
(2.1) Power off system by turning the Main Power Switch to the off position (located just inside the entry door).
(2.2) Remove the external tooth washer nut and existing power cable from the G9 ECM power input stud.
(2.3) Attach G9 Protection Module onto the G9 Power Stud with external tooth washer nut and torque to 70 in/lbs.
(2.4) Install power cable onto G9 Protection Module stud with conical washer nut and torque to 70 in/lbs.
(2.5) Locate existing G9 ground wire connection and disconnect or cut wire.
(2.6a) Splice G9 Protection Module ground wire to the existing G9 ECM ground wire. Strip each ground wire 10mm, insert each wire fully into Wago 222-413 terminal block, move orange tab from the open to fully locked position.
(2.6b) Completed wiring shown.
(2.7) Turn on Main Power Switch and verify that the LED illuminates.
This concludes the G9 Protection Module Installation.
SEOCONTENT-START PCB Revision: 1v1B Spyder P/N: BMODZTIE6 G9 Protection Addon – Datasheet Page 1 of 1 Document Revision: 1 Date: Wednesday, September 30, 2020 Operational Specs KIT Part Numbers 2.586in 1.714in * Notes Ground wire 16 GA, 24 in Torque both nuts to: 70 in/lbs e pos AGO BMODZTIE6-A connector for GND connection Operational Voltage Range* Source Voltage Must Not Exceed Max Operational Current N.B. External current protection is required, and must not exceed max operational current Storage Ambient Temperature Range Operational Ambient Temperature Range 7 to 17.5 V +/-32VDC 50A -40 to +80 °C -25 to +50 °C 1) The Protection Addon will disconnect the input power to the G9 module and the LED will be off under the following conditions: a. The voltage is under 7V b. The voltage is over 17 .5V c. The voltage polarity is reversed 2) The LED is Green when the module is within the operating voltage range. SPV□ER CON T RO L S COR P SEOCONTENT-END
1 Affected Product
Equipment
| BRAND | PART NO. | PRODUCTION DATES |
| MULTIPLEX | G9 | |
14 Associated Documents
Recall Quarterly Report #3, 2021-1
RCLQRT-20E058-2190.PDF 211.392KB
Loading...
Reload document 
Open in new tab
Recall Quarterly Report #1, 2020-3
RCLQRT-20E058-3525.PDF 211.492KB
Loading...
Recall Quarterly Report #2, 2020-4
RCLQRT-20E058-3075.PDF 211.492KB
Loading...
Recall Quarterly Report #4, 2021-2
RCLQRT-20E058-9586.PDF 211.392KB
Loading...
Recall Quarterly Report #4, 2021-2
RCLQRT-20E058-5697.PDF 211.396KB
Loading...
Recall Quarterly Report #3, 2021-1
RCLQRT-20E058-6547.PDF 211.396KB
Loading...
Recall Quarterly Report #2, 2020-4
RCLQRT-20E058-6454.PDF 211.39KB
Loading...
Recall 573 Report – Amendment 2
RCLRPT-20E058-5155.PDF 212.817KB
Loading...
Recall 573 Report – Amendment 3
RCLRPT-20E058-2907.PDF 214.771KB
Loading...
Defect Notice 573 Report
RCLRPT-20E058-4475.PDF 212.781KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20E058-4129.pdf 397.965KB
Loading...
Manufacturer Notices(to Dealers,etc)
RCMN-20E058-0606.pdf 500.383KB
Loading...
Recall 573 Report – Amendment 1
RCLRPT-20E058-5975.PDF 212.817KB
Loading...
Recall Acknowledgement
RCAK-20E058-9118.pdf 245.057KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20E058&docType=RCL
- Efficient setting key: the multifunctional battery capacity indicator has a new design of the front setting button, and have several functions: cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- Humanized designs: the battery capacity voltage indicators are designed with switched function button, you can press to check the battery capacity or real-time voltage and turn off, with alarm design, the battery meter display will flash when the battery capacity is low
- Fit different battery: the battery gauge indicators are compatible with 12V/ 24V/ 36V/ 48V/ 60V/ 72V/ 84V acid battery, ternary lithium battery, polymer lithium-ion battery, 3 -15 series lithium ion battery, storage battery, water battery and more
- LCD display: the battery capacity gauge indicators come with PVC waterproof screen protector with bright back-light, which makes you can read the results on the clear LCG display from different angles, low working power consumption and the max is 5 mA
- Suitable for: the battery meters with alarms can be applied to different machines and places such as garden, home, office and more, can serve you for a long time, meeting your different needs and practical battery indicators will give you nice experience
- Fits for DC 12V/24V cars, test range: DC 7V-35V; Each voltage meter has passed QC test prior to shipping
- Made of high quality PC material, durable and waterproof, works well in wet enviroment
- EASY TO READ: Bright and clear led digital display, reads fine on any light condition
- EASY TO INSTALL: Comes with mounting plates, tightening rings, spade connectors and screws for easy installation and wiring
- Measurement Accuracy: 0.1V-0.2V, perfect for car/motorcycle/RV/truck/boat/ATV/UTV etc.
- 【Meet Different Needs】 The 12V round voltmeter comes with a panel and a nylon nut, which can be mounted separately on the 29mm diameter mounting hole or fixed on the matching panel, so that it could meet your different mounting needs.
- 【Blue LED Display】 This 12V battery meter with blue LED light, can be widely used under DC 12V 24V. With the digital voltage meter, you can easily monitor the voltage status of your car battery in real times, especially in dark environments.
- 【Waterproof & Useful】 The marine voltmeter gauge is waterproof design, so this LED voltmeter is safe to use even in moist environments. And also the mini voltmeter is fit for 12V 24V cars, automotive, motorcycles, RVs, SUV, Off-road, ATV, boats, marine, ships, trucks, tractor, etc.
- 【Measuring Range】 The rating of this battery voltage monitor is DC 8-48V, and its accuracy is 0.1V. With the precise 3-digit LED digital voltmeter, you can better monitor of the car's battery voltage status, helping to extend battery life.
- 【Easy installation】 This 12 volt battery monitor comes with a set of wires, two mounting screws, a matching panel and a nylon nut, making it easy to install and use.
- HIGH PERFORMANCE DUAL USB CHARGING PORTS - 24W / 4.8A USB Car Charger charges your favorite mobile devices Compatible for iPad (max speed), iPhone XS, XR, 8 Plus (max speed), HTC, Galaxy, MP3 Players, Digital Cameras, PDAs, Mobile Phones.
- REAL-TIME MONITORING - Concise LED screen displays vehicle’s operating voltage (12V/24V) or the total USB charging output (5V/4.8A Max) in real time, fully controlling the whole charging process. The LEDs are bright enough to read the display without being a distraction while driving.
- SAFE ON THE GO - Intelligent circuit design protects against short circuiting, over-heating, over-currents, and over-charging. Charging stops when battery is full.
- COMPACT DESIGN - One of the industry's smallest USB car chargers for added portability, featuring two USB ports and an LED Display make it easy to access after dark. Input: 12-24V; Output: DC 5V 4.8A or 24W (Shared by two ports). One Year Warranty.
- 12 MONTHS WARRANTY - Comes with 30 days Money Back Guarantee and 12-Months Hassle-free Replacement Warranty.
- APPLICABLE BATTERY --- DROK digital battery monitor is suitable for 10-100V (12v 24v 36v 48v 60v 72v 96v) lithium battery, lead-acid battery, lithium iron phosphate battery, Ni MH battery. Default 12 volt lead acid battery.
- APPLICATION --- this multimeter can be used as battery voltage meter, battery capacity tester and temperature indicator panel for car, marine, RV, boat, etc.
- PROTECTION --- the battery power detector comes with protective shell, dustproof waterproof surface; input reverse connection protection.
- LCD DISPLAY --- the battery status reader adopts clear LCD color screen, displays battery capacity, voltage, temperature value(switched by the key).
- ALARM --- if low voltage, red indicator flashes and buzzer alarms.
- 【1% Accuracy Measurement】Shunt-type monitor design provides much more accurate real-time voltage and current draw measurement.
- 【Protect the batteries】With High and low capacity alarm functions, our battery monitor with shunt will alarm, and backlight and voltage value will flash simultaneously to protect the batteries from getting over-discharged.
- 【Fit for all battery】The batter tester is compatible with various battery types, including Lead Acid (AGM, GEL), Lithium Iron Phosphate, Lithium-ion, Nickel-metal hybrid. compatible with batteries operating at 12 volts, 24 volts, and 48 volts.
- 【Easy To read】Displays multiple electronic parameters, including Voltage, Current, Consumed Power, Battery Capacity, and battery degradation rate with a customized brightness high-definition Backlight Display.
- 【Easy to Install】Transparent shunt holder makes the battery tester easier to mount the shunt. And the 20ft Shielded cable allows you to monitor the battery status from a distance.
- Universal battery capacity indicator voltage meter - wide voltage input range DC 12V-84V Lead-acid Batteries and 3S-26S Lithium Batteries: Ternary lithium batteries, polymer batteries, lithium-ion batteries, storage batteries.
- Multifunctional Battery Capacity voltage meter Indicator - Battery tester Right Switch key can switch voltmeter, battery percentage, switch off. Left setting key have several functions: Cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- High Quality of battery voltage meter - Large LCD screen display with green backlit and low power consumption.Two display modes can be available: battery symbol and battery percentage, battery symbol and voltmeter.
- Safety to Use - The battery voltage meter Built-in 30cm power cable, simple to connect. Reverse protection design, won't burn if connect reversely.
- Portable and Waterproof voltage meter- Small size, light weight, equipped with a PVC film, the surface is waterproof.
- Dual-display: it can display auto battery voltage and temperature inside the car simultaneously(this is for Fahrenheit)
- External temp sensor: its external temp sensor allows you to bend sensor to avoid possible heating/ direct sunshine so that you can acquire more accurate results
- Safe usage: the monitor has built-in fuse, making safe usage possible and causing no damage to your car
- Easy reading: it screen is made of LED material, hence it is easy and convenient for you to read even in dim light
- Switch Control:The voltage gauge waterproof a more accurate battery voltage. You can toggle between voltage and battery percentage or turn it off to reduce battery drain while in storage.
- oltage Gauge: Support 5-48V Input Voltage. Power display range 0-100%. Precise 3-bit LED digital display.
- Check States: Battery Capacity Voltage Monitor Gauge Indicator better helps you to early notice your car voltage condition.
- Widely Use: Fit for 5-58V Cars, Motorcycles, RV, SUV, Off-road, ATV, Boat, Marine, Ship, Truck, Tractor etc.Mini size and easy to install.
- Package Includes: 1 x Car Voltmeter Gauge; 2 x Insulated Terminals; 2 x Screws, 2 x Wires.
- Efficient setting key: the multifunctional battery indicator has a new design of the front setting button, and have several functions: cycle voltmeter/battery percentage, turn on the backlight, black, sleep mode, battery type selection etc.
- Practical designs: the battery capacity voltage indicators are designed with switched function button, you can press to check the battery capacity or real-time voltage and turn off, with alarm design, the battery meter display will flash when the battery capacity is low
- Fit Different Battery: the battery gauge indicators are compatible with 12V/ 24V/ 36V/ 48V/ 60V/ 72V/ 84V acid battery, ternary lithium battery, polymer lithium ion battery, 3 -15 series lithium ion battery, storage battery, water battery and more, note: if your meter always shows, it means that you have the wrong battery code and need to double-check and the correct code
- Fit different battery: the battery gauge indicators are compatible with 12V/ 24V/ 36V/ 48V/ 60V/ 72V/ 84V acid battery, ternary lithium battery, polymer lithium-ion battery, 3 -15 series lithium ion battery, storage battery, water battery and more
- Where to use: the battery meters with alarms can be applied to different machines and places such as garden, home, office and more, can serve you for a long time, meeting your different needs and practical battery indicators will give you nice experience
Last update on 2024-04-12 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.