| “This site contains affiliate links for which OEMDTC may be compensated” |
April 5, 2018 NHTSA CAMPAIGN NUMBER: 18V219000
Valve Stem may get Damaged and Lose Air
Valve stem damage can result in loss of air pressure in the inner tire, causing an overload of the outer tire and increasing the risk of a crash.
NHTSA Campaign Number: 18V219
Manufacturer Newmar Corporation
Components TIRES
Potential Number of Units Affected 72
Summary
Newmar Corporation (Newmar) is recalling certain 2018-2019 Newmar New Aire motorhomes built on Daimler Trucks FCCC XCS chassis equipped with wheels that have Freightliner-logo shaped holes. These wheels have a valve stem stabilizer that may dislodge and damage the valve stem.
Remedy
Newmar will notify owners, and Daimler Trucks dealers will inspect and replace the inner wheel valve stem stabilizer, as necessary, free of charge. The recall began on May 31, 2018. Owners may contact Newmar customer service at 1-800-731-8300. Newmar’s number for this recall is 18V-194.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
2 Affected Products
Vehicle
| MAKE | MODEL | YEAR |
| NEWMAR | NEW AIRE | 2018-2019 |
6 Associated Documents
Recall Acknowledgement
RCAK-18V219-2205.pdf 246.032KB
Loading...
Reload document 
Open in new tab
Recall 573 Report
RCLRPT-18V219-8902.PDF 214.487KB
Loading...
Recall Quarterly Report #1, 2018-2
RCLQRT-18V219-5182.PDF 214.507KB
Loading...
Recall Quarterly Report #2, 2018-3
RCLQRT-18V219-7279.PDF 211.225KB
Loading...
Recall Quarterly Report #4, 2019-1
RCLQRT-18V219-0224.PDF 211.409KB
Loading...
Recall Quarterly Report #3, 2018-4
RCLQRT-18V219-3744.PDF 211.309KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V219&docType=RCL
| “This site contains affiliate links for which OEMDTC may be compensated” |
SaleBestseller No. 1
Riseuvo Valve Stem Puller Installer Tool - 10pcs TR412, 6pcs TR413, 6pcs TR414 Tire Snap in Short Rubber Valve Stem, 4 Way Valve Core Remover, Single Head Tire Valve Core Remover Installer Tool
- All Tool You Need - 1 pcs valve stem puller installer Tool, 10 Pcs TR412, 6pcs TR413, 6pcs TR414 valve stems with 20 pcs valve stem cores, 1 pcs single head valve core tool, 1 pcs double heads valve core remover tool, 1 pcs 4 way valve tool.
- Valve Stem Puller - For installation or removal of snap in type tubeless tire valves
- Rubber Tire Valve Stem - These rubber tire valve stem with bolt-in design, easy and convenient to install and hold the pressure good; Durable and practical
- 4 Way Tool - Remove your valve core, re-tap threads and ream the inside of the valve (also works on A.C. unit valves)
- Single or Double Head Tire Valve Core Remover - For quick removal or installation of tire valves. It is often necessary to wring out the valve core when aerated or deflate the tire, then you need the tire valve removal tool
Bestseller No. 2
Slime 2080-A Tubeless Tire Valves 1¼", TR 413 45, Schrader valve stem, pack of 2 valves
- Easily replace your worn and leaky TR413 tire valves with Slime Product
- Featuring a .453″ rim hole, these tubeless tire valves are 1.25" long and snap in easily to your TR413 tires.
- Has a Schrader valve stem and cap and packs contains two tire valves
- Quick and easy to use, just deflate tire and breakdown tire off rim and remove old valve stem
- Insert new stem from inside rim until it snaps into place and then reinstall tire and inflate to recommended psi
Bestseller No. 3
weideer 52Pcs TR412, TR413, TR414 Black Rubber Snap-in Tire Valve Stem for Replacement of Tubeless Rim Holes of Standard Cars
- Material: The rubber snap-on valve stem is made of high-quality brass and ozone-resistant EPDM, and is equipped with a pure copper valve core. After ozone and leakage tests, the service life is prolonged.
- Tire valve stems: The function of the valve stem is to inflate and deflate the tire to maintain the seal of the tire after inflation.
- Easy installation: remove the valve core to deflate the tire, remove the tire from the rim, insert a new valve stem from the inside of the rim until it snaps into place, properly install the tire, inflate it to the rated air pressure, and replace it with a new valve cap to complete the installation.
- Application: The standard diameter snap-in valve is suitable for most cars, light trucks and private cars with tubeless tire valves.
- Packaging includes: 22 x TR412, 20 x TR413, 10 x TR414.You will receive a total of 52pcs rubber snap-in tubeless tire valve stems,which can meet the daily use and replacement needs.
Bestseller No. 4
ZHSMS Valve Stem Puller Installer Tool, 5Pcs TR412, 5Pcs TR413, 5Pcs TR414 Tire Snap in Short Rubber Valve Stem, 4 Way Valve Core Remover, Single Head Tire Valve Core Remover Installer Tool(40Pcs)
- 【Tool Material】Tyre valve stem puller is made of high quality alloy, which is sturdy and durable for a long service time. Valve: zinc alloy inside + rubber outside.Dual Single Head Valve Core Remover : plastic handle + robust steel shaft with corrosion-resistant plating.
- 【Tool Advantages】The tool sets easy to carry and use. Quickly remove or install the the tire valve. pulls out the valve stem with the principle of leverage, which can save your effort effectively.
- 【Easy To Install】Pull out the old valve stems and re-install the new valve stems, No need to worry scratching wheels or destroying valve stems.
- 【Compatible】Suitable for repair of tubeless tires for passenger cars, motorcycles, ATVs, off-road vehicles and trucks.
- 【Package】1 pcs valve stem puller installer Tool, 5 Pcs TR412, 5pcs TR413, 5pcs TR414 valve stems with 10 pcs valve stem cores,10 x valve stem caps,2 pcs single head valve core tool,1 pcs double heads valve core remover tool, 1 pcs 4 way valve tool.
Bestseller No. 5
Tallew 150 Pieces Tire Valve Stems TR413 Tubeless Valve Stems Rubber Snap-in Valve Stems Black Standard Length Replacement Tire Valve Stems for Car Tubeless Rim Holes Replacement
- One Size Suits Most Cars: each valve stem for tubeless tires measures approx. 0.7 x 1.7 inches, simple for your storage and carry, practical and versatile to use, fitting most cars, lawn mowers, light trucks, small trailers, unicycles, motorcycles and other vehicles
- Serve You Long: made of brass and ozone resistant rubber, these snap in tire valve stems are resistant to breakage, deformation, and tear; In addition, they are EPDM, ozone and leak tested, come with high temperature resistant brass spool, with fine reliability, serviceability and performance, able to be applied for a long time
- Enhance Safety: these tire valve stems are able to keep your tires inflated at a constant level of air pressure well, helpful to guard your tire from wear and make the car run smoothly, nice accessories for improving the safety of your driving, which can bring big convenience to you
- Large Amount to Replace: there are 150 pieces of TR413 valve stems in the package, abundant in quantity, sufficient for you to use, replace in your work and daily life, and you can share them with family members; Please check the model and compatibility information carefully before ordering
- Effortless to Install and Disassemble: these black tubeless valve stems adopt snap in design, convenient for your installation and disassembly, meanwhile, they can be operated by hand, do not need complex steps, time saving and effort saving; Please note that the tire technician should always replace the valve stem when changing a tire
Bestseller No. 6
CKAuto 4 Pieces TR416 Metal Valve Stems Outer Mount Fits .453" & .625" Rim Holes Long 1 1/2", Silver
- High Quality Brass, Chrome Finish and EPDM Rubber, Long Service Life
- Fits 453" and .625" Valve Holes, 1 1/2" inch Effective Length, Complete Size:1.7" L x 0.75" W
- Hold the Pressure Well, 100% Air Leak Test to Ensure Safety
- 4 Pcs TR-416 Metal Clamp in Valve Stem, Rated for 130 PSI
- Easy to Install, High Temperature Valve Core Included
Bestseller No. 7
CKAuto TR412 Rubber Snap-in Short Black Tire Valve Stem for Tubeless 0.453 Inch 11.5mm Rim Holes on Standard Vehicle Tires (5pcs/Bag)
- High Quality: TR412 tire valve stems are constructed of high temperature brass valve cores and ozone resistant EPDM rubber,100% Ozone tested and leak tested
- Various Application: Snap-in valve stems for tubeless 0.453” (11.5mm) diameter rim holes, U.S. standard,providing safe tire system and safe driving, up to 65 PSI cold pressure per industry standard, durable and practical
- Easy To Install: with bolt-in design, these rubber tire valve stems are very easy and convenient to install, keep your tires inflated at a steady air pressure level and easily check PSI quickly
- Universal Rubber Stem: Valve stems are a standard diameter and fit for Cars, light trucks, small trailers, wheelbarrows, lawn mowers, ATVs, motorcycles
- Specification: CKAuto Brand Premium TR412 Rubber Snap-in Valve Stem ,Hole Diameter in Wheel:0.453 inches(11.5mm), Package Content: 5 x TR412 Tire Valve Stem
SaleBestseller No. 8
Aoerzn 8Pcs Premium TR413 Tubeless Tire Valve Stems, Black Rubber Snap-in Tire Valve Stem, Universal for Tubeless 0.453 inches 11.5mm Rim Holes
- THE AOERZN ADVANTAGE: Join our customer groups, and enjoy more excellent auto parts. Cooperate happily!
- WIDELY APPLICABLE: Perfect for the automotive world with 0.453 inch tubeless and 11.5mm rim holes. Instead of sele
- HIGH-QUALITY MATERIALS: These tire valve stem have been EPDM rubber tested, ozone tested and 100% leak tested, and are equipped with high temperature brass valve cores, good hand feeling, corrosion resistance, more durable and rustproof.
- CONVENIENT: These rubber snap-type tire valves are bolted for easy installation and maintain good pressure, durable and practical. Ideal for people who like comfortable driving. It will bring you peace while driving.
- YOU WILL GET: 8Pcs black TR413 rubber snap-in tire valve stems. I believe this product can fully meet your requirements. Welcome guide, high quality assurance and friendly customer service.
Bestseller No. 9
deemars 4 Pieces TR-416 Metal Valve Stems Outer Mount, Metal Valve Stems Fits 0.453 and 0.625 Inch Rim Holes 1-1/2" Long
- [High quality material]:TR-416 metal valve stem is made of high-quality pure copper, and the Durable Rubber, which is rust resistant and corrosion resistant and can be used for a long time.
- [Tr416 metal valve stem]: The valve stem is used to keep the air in the tire. The metal valve stem can ensure that there is no air loss when driving the vehicle.
- [Specifications]: 4*TR416 metal valve stem, 1 1 / 2 inch effective length, maximum air pressure of 200 psi. Full size is 1.65 "L x 0.75" w. Please measure the size before purchase to ensure that the TR416 metal valve stem is suitable for your car.
- [Easy installation]: Deflate the tire and let the tire off the rim. Insert the new valve stem from the inside of the rim until it clicks into place. Replace the valve stem while replacing the tire to ensure long service life of the tire and safe driving.
- [About us]: We are committed to creating a perfect product experience for customers. Our goal is to serve every detail and bring convenience to every family.
Bestseller No. 10
Frienda 100 Pcs Tire Valve Stems TR412 TR413 TR414 Rubber Black Rubber Snap-in Valve Stems Standard Length Replacement Tire Valve Stems for Car Tubeless Rim Holes Replacement
- What you will get: you will receive a total of 100 pieces of tubeless tire valve stems (TR413: 50 pcs, TR412: 25 pcs, TR414: 25 pcs) ,sufficient quantity to meet your demands for daily use and replacement, you can store them for a long term use and please check the compatibility information carefully before placing an order
- Quality material: these black rubber snap-in valve stems are made of quality brass and ozone-resistant rubber, and have been tested by EPDM, ozone and leakage tests, and are equipped with high temperature brass valve cores, better performance, can serve you for a long time, economical and practical
- Easy to install: the standard length replacement tire valve stems are very easy to install and disassemble due to the snap-in design, you can easily install the valve stem with hands, time-saving and simple, providing you with much convenience when you are driving out; When replacing a tire, a tire technician should always replace the valve stem to ensure there are no issues with the tire changing process
- Practical function: the tire valve stem can keep your car tire well inflated at a steady air pressure level, thus to reduce the tire wear and keep the vehicle running smoothly, also the quality part you choose to replace, you can buy it with confidence
- Suitable size: the practical black rubber snap-in valve stem size is about 0.7 x 1.7, 0.7 x 1.4, 0.7 x 2 inches, suitable for most cars, light trucks, small trailers, unicycles, lawn mowers and motorcycles, a good accessory for car owners or technicians
Last update on 2024-04-14 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.