“This site contains affiliate links for which OEMDTC may be compensated” |
March 29, 2018 NHTSA CAMPAIGN NUMBER: 18V199000
Splash Panel may Rub Against Fuel Line Fitting
A fuel leak in the presence of an ignition source can increase the risk of a fire. Additionally, fuel leaking onto the roadway may increase the risk of a crash.
NHTSA Campaign Number: 18V199
Manufacturer Navistar, Inc.
Components FUEL SYSTEM, DIESEL
Potential Number of Units Affected 527
Summary
Navistar, Inc. (Navistar) is recalling certain 2018-2019 International LT trucks. When the hood is in the closed position, the fender splash panel may rub on the inlet fuel line fitting to the fuel/water separator, causing abrasion damage to the fitting and possibly resulting in a fuel leak.
Remedy
Navistar will notify owners, and dealers will trim the splash panel, and replace the fuel/water inlet line if it is damaged, free of charge. The recall began on May 14, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar’s number for this recall is 18503.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
SERVICE PROCEDURE
18503
May, 2018
SUBJECT: SAFETY RECALL
Fuel / Water Separator Inlet Fuel Line Connector on certain International Series vehicles built 01 February 2017 thru 22 January 2018 with either a 483 Model Fuel I Water Separator feature code 0015LMC, 0015LMD, 0015LNC, 0015LND, or 0015LPK with Drum Brakes or a 488 Model Fuel / Water Separator feature code 0015LNL, 0015LNM, or 0015LPL.
DEFECT DESCRIPTION
The fender splash panel may contact the inlet fuel line fitting to the fuel / water separator resulting in a rub condition that could cause abrasion damage to the fitting. Abrasion damage to a fuel line fitting may result in a fuel leak that could cause fuel to spill on the roadway and increase the risk of a motor vehicle crash resulting in property damage or personal injury.
MODELS INVOLVED
This safety recall involves certain International LT Series vehicles built 01
February 2017 thru 22 January 2018 with either a 483 Model Fuel / Water Separator feature code 0015LMC, 0015LMD, 0015LNC. 0015LND, or 0015LPK with Drum Brakes or a 488 Model Fuel / Water Separator feature code 0015LNL, 0015LNM, or 0015LPL.
ELIGIBILITY
This procedure applies ONLY to vehicles marked in the Navistar Service Portal with Safety Recall 18503. Also complete any other open campaigns listed on the Service Portal at this time.
PARTS INFORMATION
There are no parts for this campaign.
2 Affected Products
Vehicle
MAKE | MODEL | YEAR |
INTERNATIONAL | LT | 2018-2019 |
7 Associated Documents
Defect Notice 573 Report
RCLRPT-18V199-2007.PDF 215.896KB
Recall Acknowledgement
RCAK-18V199-2970.pdf 246.037KB
Remedy Instructions and TSB
RCRIT-18V199-5378.pdf 198.622KB
Recall Quarterly Report #3, 2018-4
RCLQRT-18V199-3963.PDF 211.322KB
Recall Quarterly Report #4, 2019-1
RCLQRT-18V199-3479.PDF 211.428KB
Recall Quarterly Report #1, 2018-2
RCLQRT-18V199-8966.PDF 214.513KB
Recall Quarterly Report #2, 2018-3
RCLQRT-18V199-8775.PDF 214.608KB
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=18V199&docType=RCL
“This site contains affiliate links for which OEMDTC may be compensated” |
- Restores/Increase Horsepower: detergents clean deposits in the injection system
- Reduces Fuel Consumption tests show an average of 4 percent improvement in MPG and gains up to 9.6 Percent
- Cetane Improver improves combustion resulting in better engine starting, running and reduced noise
- Reduces Wear: Lubricity improvers restore lubricity to ultra low sulfur diesel fuels
- Reduces Emissions reduces Smoke and Particulates
- Cleans dirty injectors and prevents injector sticking in both High Pressure Common Rail (HPCR) and older systems
- Boosts cetane up to 6 numbers – engines run smoother with less power lag and faster cold starts
- Effective in all diesel fuels, including ULSD, biodiesel and biodiesel blends
- Fit type: Universal
- Part number: 3064-06
- 40.6 oz bottle treats 400 gallons - Use at every fill-up
- Formulated to address issues with modern diesel fuels
- Incorporates Archoil's proven combustion modifier technology and a strong cetane boost to increase power and response
- Cleans, lubricates and protects your fuel system (including HPCR systems)
- Increases fuel economy (MPG)
- Cleans Fuel System – Deeply cleans any diesel engine’s fuel system including injectors, cylinders, fuel lines, tank, and tank in one fuel treatment lasting up to 6,000 miles
- Cleans Fuel Injectors – Safely removes and prevents Internal Diesel Injector Deposits (IDIDs), External Diesel Injector Deposits (EDID’s) and other forms of varnish and deposits
- Boosts Cetane – Increases cetane by up to 7 points after the fuel system is fully cleaned, for an even more effective boost in combustion, fuel economy, and engine power while reducing DPF regens
- Increases Mileage – Maximizes your MPG's and helps you save at the pump by improving engine performance and fuel combustion, so you can get the most out of your diesel fuel
- Stabilizes and Prevents Rust, Disperses Moisture – Keeps diesel “healthy” using a military grade non-alcohol-based water dispersant plus rust and corrosion inhibitors
- Restores/Increase Horsepower: detergents clean deposits in the injection system
- Reduces Fuel Consumption tests show an average of 4 percent improvement in MPG and gains up to 9.6 Percent
- Cetane Improver improves combustion resulting in better engine starting, running and reduced noise
- Reduces Wear: Lubricity improvers restore lubricity to ultra low sulfur diesel fuels
- Reduces Emissions reduces Smoke and Particulates
- Cleans dirty injectors and prevents injector sticking in both High Pressure Common Rail (HPCR) and older systems
- Removes both internal and external deposits on fuel injectors
- Restores lost power and fuel economy
- Contains Slickdiesel Lubricator to protect fuel pumps and injectors from increased wear caused by poor quality Ultra Low Sulfur Diesel (ULSD) fuel
- Effective in all diesel fuels, including ULSD, biodiesel and biodiesel blends
- Cleans and Lubricates Fuel System: The product contains a blend of detergents and additives that help to clean and lubricate the fuel system, including the fuel injectors, carburetor, and combustion chamber.
- Improves Fuel Economy: The product can help to improve fuel economy by removing deposits and contaminants from the fuel system and improving the efficiency of fuel combustion.
- Reduces Emissions: By improving fuel combustion, the product can also help to reduce exhaust emissions, including harmful pollutants such as carbon monoxide and nitrogen oxides.
- Increases Power and Acceleration: The product can also help to increase power and acceleration by improving the flow of fuel through the system and reducing the buildup of deposits that can impede engine performance.
- Neutralizes Low Sulfur Fuel Problems: Lucas Oil 10013 Fuel Treatment contains a blend of detergents and additives that help to neutralize sulfur and other harmful contaminants that may be present in the fuel system. The detergents work to clean the fuel injectors and carburetor, which can become clogged with sulfur deposits over time.
- Made in the U.S.A. Restores/Increase Horsepower.
- Reduces Fuel Consumption–tests show an average of 4% improvement in MPG and gains up to 9.6%
- Cetane Improver – improves combustion resulting in better engine starting, running & reduced noise
- Reduces Wear – lubricity improvers restore lubricity to ultra low sulfur diesel fuels
- Reduces Emissions – reduces Smoke and Particulates
Last update on 2024-04-13 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.