| “This site contains affiliate links for which OEMDTC may be compensated” |
June 24, 2020 NHTSA CAMPAIGN NUMBER: 20V368000
Without the proper reflective equipment, the vacuum excavator trailer may have reduced visibility, increasing the risk of a crash.
NHTSA Campaign Number: 20V368
Manufacturer Vac-Tron Equipment, LLC
Components EXTERIOR LIGHTING
Potential Number of Units Affected 100
Summary
Vac-Tron Equipment, LLC (Vac-Tron), is recalling certain 2020 CVGTLC, CVSGT, CVGT, LPSGT, LPXDT, MINICOMBO and LPSDT Vacuum Excavator trailers. The trailers may be missing rear and rear-side reflex reflectors. As such, these trailers fail to comply with the requirements of Federal Motor Vehicle Safety Standard number 108, “Lamps, Reflective Devices, and Associated Equipment.”
Remedy
Vac-Tron will notify owners, and Vermeer dealers will install remedy kits provided by Vac-Tron, free of charge. Vac-Tron issued owners an interim notification on August 18, 2020. The recall began August 18, 2020. Owners may contact Vac-Tron customer service at 1-888-822-8766. Vac-Tron’s number for this recall is VVK0010.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Vac-Tron Equipment, LLC
Trenchless
Okahumpka, FL 34762 USA
| FIELD CAMPAIGN SERVICE BULLETIN # | SVV2020013 | DATE: | 04 August 2020 |
| CAMPAIGN TYPE: | Mandatory-Product Safety |
| CAMPAIGN CATEGORY: | Kit and Bulletin |
| MACHINE /ATTACHMENT MODEL (S) : |
Serial Numbers | ||
| Included | Excluded | Kit Version | |
| CVGT | See attached listing on Pages 4 and 5 of this Bulletin for specific VIN and serial numbers | N/A | VVK01 |
| CVGTLC | |||
| CVSGT | |||
| LPSDT | |||
| LPSGT | |||
| LPXDT | |||
| MINICOMBO | |||
Subject:
PRODUCT SAFETY RECALL FIRST NOTICE
Rear and Side Reflectors Installation Kit (VVK00-0010)
Background:
INADEQUATE REAR AND SIDE REFLECTORS
The rear and side reflectors do not meet US or Canada Federal Motor Vehicle Safety Standard (FMVSS/CMVSS) governmental regulation 108 for the United States, Canada and Mexico.
DEATH OR SERIOUS INJURY POSSIBLE
When towing or parking the vacuum excavator on public roadways, a crash may occur resulting in death or serious injury resulting from a driver(s) of other vehicle(s) not seeing the vacuum excavator at night or during limited sunlight and strike the vacuum excavator. To reduce the potential of this occurring, rear-facing and side-facing reflectors will be installed on the rear of the vacuum excavator. Property or equipment damage may also occur.
Solution:
IMMEDIATE MACHINE MODIFICATIONS REQUIRED
VVK00-0010 has been created to provide the necessary parts and instructions to install reflectors on the rear and side of the vacuum excavator. This kit must be installed as soon as possible.
Please be reminded that it is a violation of Federal law for you to sell or lease the machines covered by this notification until this recall has been performed on these machines. Substantial civil penalties apply to violations of this law.
DEALER PARTICIPATION
REVIEW REPORT, ORDER KITS, CONTACT CUSTOMERS
- Reports will be emailed during the week of August 7, 2020, to dealerships shown in our records which have units in their territory affected by this Alert. Please review the report for accuracy, including owner and/or address changes.
If the information contained in the report is NOT correct, please notify the Product Safety Department on or before August 20, 2020 at:
Telephone: 641-621-7060
Fax: 641-621-7739
Email: productsafety@vermeer.com
- Dealerships Order Kits by calling Vac-Tron at 888-822-8766.
Each dealership should determine the quantity of Kits to order initially depending upon the number of units that may be available for immediate upgrade. Do not order more Kits than needed for immediate installation.
- Contact your affected customer(s) to schedule a mutually acceptable time to upgrade their machine. Note: Letters will be sent to the customer(s) on or about August 21, 2020. Also refer to Owner Notification section below.
If you have any questions concerning the installation of VVK00-0010, please contact the Vac-Tron Service Department. Vermeer Corporation is assisting Vac-Tron with the administration of this campaign.
REIMBURSEMENT
Upon completion of each Kit installation, a campaign Warranty Claim must be submitted to the Vermeer Corporate Warranty Department for reimbursement of the parts cost and labor of the Kit.
This kit will reimburse 1 hour of labor.
Note: Future notices to dealers and owners are dependent upon the receipt of Warranty Claim.
OWNER NOTIFICATION
Sample Letter: Included at the end of this Bulletin is a sample letter which will be sent by Vermeer Corporation directly to the Owners on or about August 21, 2020, via USPS certified/registered mail. Owner registrations indicate no translations are required for this campaign. The owner letter will be available in English only.
This owner notification/letter instructs the owner to contact their local dealership to
arrange for a time to have the Kit installed. After receiving VVK00-0010 from Vac-Tron, you must contact your affected customer(s) immediately and schedule a mutually acceptable time to upgrade their machine.
We regret any inconvenience these corrective measures may cause you. This required work is for safety of the crew, the towing vehicle driver and occupants as well as others traveling on public roadways. We hope you agree the safety benefits surpass the inconvenience.
VAC-TRON EQUIPMENT, LLC.
Attachment:
VVK00-0010 Kit Instructions
| AFFECTED MACHINES ‐ VVK01‐0010 | ||||||
| MODEL | VIN | SERIAL/UNIT | MODEL | VIN | SERIAL/UNIT | |
| CVGT | 5HZC192X0LK002124 | 200145 | LPSDT | 5HZG16212LK002296 | 200211 | |
| CVGT | 5HZC162X0LK002123 | 200286 | LPSDT | 5HZG16213LK002307 | 200213 | |
| CVGT | 5HZC162X4LK002125 | 200309 | LPSDT | 5HZG16219LK002263 | 200223 | |
| CVGT | 5HZC162X8LK002127 | 200326 | LPSDT | 5HZG16211LK002290 | 200272 | |
| CVGT | 5HZC162XXLK002128 | 200327 | LPSDT | 5HZG16217LK002262 | 200273 | |
| CVGT | 5HZC162X1LK002129 | 200328 | LPSDT | 5HZG16212LK002279 | 200274 | |
| CVGT | 5HZC192X6LK002130 | 200377 | LPSDT | 5HZG16219LK002280 | 200275 | |
| CVGTLC | 5HZ0192J2LK000115 | 200356 | LPSDT | 5HZG16210LK002281 | 200276 | |
| CVGTLC | 5HZ0192J2LK000101 | 200357 | LPSDT | 5HZG16212LK002282 | 200277 | |
| CVGTLC | 5HZ0192J4LK000102 | 200358 | LPSDT | 5HZG1621XLK002286 | 200278 | |
| CVGTLC | 5HZ0192J6LK000103 | 200359 | LPSDT | 5HZG19211LK002291 | 200292 | |
| CVGTLC | 5HZ0192J8LK000104 | 200360 | LPSDT | 5HZG16214LK002297 | 200302 | |
| CVGTLC | 5HZ0192JXLK000105 | 200361 | LPSDT | 5HZG16216LK002298 | 200303 | |
| CVGTLC | 5HZ0192J1LK000106 | 200362 | LPSDT | 5HZG19216LK002299 | 200310 | |
| CVGTLC | 5HZ0192J3LK000107 | 200363 | LPSDT | 5HZG19219LK002300 | 200311 | |
| CVGTLC | 5HZ0192J5LK000108 | 200364 | LPSDT | 5HZG19210LK002301 | 200312 | |
| CVGTLC | 5HZ0192J3LK000110 | 200366 | LPSDT | 5HZG19212LK002302 | 200313 | |
| CVGTLC | 5HZ0192J7LK000112 | 200368 | LPSDT | 5HZG19214LK002303 | 200314 | |
| CVGTLC | 5HZ0192J9LK000113 | 200369 | LPSDT | 5HZG19213LK002308 | 200315 | |
| CVGTLC | 5HZ0192J0LK000114 | 200370 | LPSDT | 5HZG19215LK002309 | 200316 | |
| CVSGT | 5HZD192Y2LK002140 | 200264 | LPSDT | 5HZG19211LK002310 | 200317 | |
| CVSGT | 5HZD162Y6LK002141 | 200265 | LPSDT | 5HZG16210LK002314 | 200340 | |
| CVSGT | 5HZD162Y8LK002142 | 200266 | LPSDT | 5HZG16218LK002318 | 200342 | |
| CVSGT | 5HZD192Y8LK002143 | 200267 | LPSDT | 5HZG1621XLK002319 | 200343 | |
| CVSGT | 5HZD162Y1LK002144 | 200288 | LPSDT | 5HZG16216LK002317 | 200348 | |
| CVSGT | 5HZD162Y3LK002162 | 200289 | LPSDT | 5HZG1921XLK002323 | 200350 | |
| CVSGT | 5HZD162Y3LK002145 | 200299 | LPSDT | 5HZG19211LK002324 | 200351 | |
| CVSGT | 5HZD162Y5LK002146 | 200300 | LPSDT | 5HZG19213LK002325 | 200352 | |
| CVSGT | 5HZD162Y7LK002147 | 200301 | LPSDT | 5HZG19215LK002326 | 200353 | |
| CVSGT | 5HZD162Y0LK002149 | 200304 | LPSDT | 5HZG19217LK002327 | 200355 | |
| CVSGT | 5HZD162Y9LK002151 | 200318 | LPSDT | 5HZG19219LK002328 | 200385 | |
| CVSGT | 5HZD162Y0LK002152 | 200319 | LPSDT | 5HZG19210LK002329 | 200386 | |
| CVSGT | 5HZD162YXLK002157 | 200329 | LPSDT | 5HZG16214LK002350 | 200387 | |
| CVSGT | 5HZD162Y1LK002158 | 200330 | LPSGT | 5HZH16229LK002051 | 200345 | |
| CVSGT | 5HZD162Y3LK002159 | 200331 | LPXDT | 5HZJ16236LK002146 | 200087 | |
| CVSGT | 5HZD192Y8LK002160 | 200332 | LPXDT | 5HZJ16238LK002147 | 200088 | |
| CVSGT | 5HZD192YXLK002161 | 200333 | LPXDT | 5HZJ16232LK002144 | 200089 | |
| CVSGT | 5HZD192Y3LK002163 | 200341 | LPXDT | 5HZJ16231LK002149 | 200137 | |
| CVSGT | 5HZD162Y7LK002150 | 200349 | LPXDT | 5HZJ16237LK002169 | 200161 | |
| LPSDT | 5HZG16214LK002283 | 200105 | LPXDT | 5HZJ16230LK002160 | 200240 | |
| LPSDT | 5HZG16216LK002284 | 200106 | LPXDT | 5HZJ19235LK002172 | 200248 | |
| LPSDT | 5HZG16218LK002285 | 200107 | LPXDT | 5HZJ19233LK002171 | 200249 | |
| AFFECTED MACHINES ‐ VVK01‐0010 | ||||||
| MODEL | VIN | SERIAL/UNIT | MODEL | VIN | SERIAL/UNIT | |
| LPXDT | 5HZJ19237LK002173 | 200250 | LPXDT | 5HZJ16230LK002174 | 200296 | |
| LPXDT | 5HZJ19230LK002161 | 200251 | LPXDT | 5HZJ16234LK002176 | 200306 | |
| LPXDT | 5HZJ19232LK002162 | 200252 | LPXDT | 5HZJ16236LK002177 | 200307 | |
| LPXDT | 5HZJ19234LK002163 | 200253 | LPXDT | 5HZJ16238LK002178 | 200308 | |
| LPXDT | 5HZJ16238LK002164 | 200255 | LPXDT | 5HZJ16231LK002183 | 200337 | |
| LPXDT | 5HZJ1623XLK002165 | 200256 | LPXDT | 5HZJ1623XLK002179 | 200339 | |
| LPXDT | 5HZJ16231LK002166 | 200257 | LPXDT | 5HZJ16235LK002185 | 200344 | |
| LPXDT | 5HZJ16233LK002167 | 200258 | MINICOMBO | 5HZK19240LK002027 | 200346 | |
| LPXDT | 5HZJ16235LK002168 | 200259 | MINICOMBO | 5HZK19244LK002029 | 200395 | |
| LPXDT | 5HZJ19230LK002175 | 200290 | ||||
Sample Owner Letter
NHTSA SAFETY RECALL NUMBER 20V-368
IMPORTANT SAFETY RECALL
First Notice
Reflector Installation Kit (VVK00-010)
| Model: «Model»
This notice applies to your vehicle, Serial No: «PRD_SRL» Unit No: «PART_SRL» |
August 21, 2020
VIA USPS CERTIFIED/REGISTERED MAIL
Dear «MODEL» Owner:
This notice is sent to you in accordance with the requirements of the U.S. National Traffic and Motor Vehicle Safety Act.
Vermeer has decided that a defect, that relates to motor vehicle safety, exists in certain model year 2020 Vermeer «MODEL» vacuum excavator trailers.
INADEQUATE REAR AND SIDE REFLECTORS
The rear and side reflectors do not meet US or Canada Federal Motor Vehicle Safety Standard (FMVSS/CMVSS) governmental regulation 108 for the United States, Canada and Mexico.
DEATH OR SERIOUS INJURY POSSIBLE
When towing or parking the vacuum excavator on public roadways, a crash may occur resulting in death or serious injury resulting from a driver(s) of other vehicle(s) not seeing the vacuum excavator at night or during limited sunlight and strike the vacuum excavator. To reduce the potential of this occurring, rear-facing and side-facing reflectors will be installed on the rear of the vacuum excavator. Property or equipment damage may also occur.
IMMEDIATE MACHINE MODIFICATIONS REQUIRED
VVK00-0010 has been created to provide the necessary parts and instructions to install reflectors on the rear and side of the vacuum excavator. This kit must be installed as soon as possible.
Please contact your authorized, independent Vermeer dealer immediately to arrange a mutually acceptable time and location to install VVK00-0010 at no cost to you for labor or materials. The installation of this kit is estimated at 1 hour of labor. If the Vermeer dealer travels to the unit to install the kit, costs may be incurred by the owner. You must have your machine upgraded for these safety features.
| Contact your local Vermeer Dealer: «Service_Dealer_Name»
«Serv_Dealer_Add1» «Serv_Dealer_Add2» «Serv_Dealer_City» «Serv_Dealer_St» «Serv_Dealer_Zip» «SERV_DEALER_COUNTRY» Telephone: «Serv_Dealer_Phone» |
According to our records, you currently own a Vermeer «MODEL» vacuum excavator trailer. The Model and Serial Number of the «MODEL» is shown at the top right of this letter. If you no longer own this unit, please notify the Product Safety Department at:
Toll Free: 800-829-0051, extension 7060
Telephone: 641-621-7060
E-mail: productsafety@vermeer.com
If possible, please provide the name and address of the new owner. Vermeer Corporation is assisting Vac-Tron with the administration of this campaign.
We regret any inconvenience these corrective measures may cause you. This required work is for safety of the crew, the towing vehicle driver and occupants as well as others traveling on public roadways. We hope you agree the safety benefits surpass the inconvenience.
Very truly yours,
VAC-TRON EQUIPMENT, LLC
Federal regulations require that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten (10) days.
If the authorized dealer has failed or is unable to remedy the defect without charge and within a reasonable time, contact Vermeer Product Safety by email at productsafety@vermeer.com or by calling 800-829-0051 or 641-621-7060. You may also submit a complaint to the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Avenue SE, Washington, D.C. 20590 or call the Vehicle Safety Hotline at 888-327-4236 (TTY: 1-800-424-9153); or go to https://www.safercar.gov
Vac-Tron Equipment, LLC
Trenchless
Okahumpka, FL 34762 USA
| FIELD CAMPAIGN KIT # | VVK00-0010 | DATE: | 04 August 2020 |
For Dealer Reference: Service Bulletin #SVV2020-13
Rear and Side Reflector Installation Kit
| CAMPAIGN TYPE: | Mandatory-Product Safety |
| CAMPAIGN CATEGORY: | Kit and Bulletin |
| MACHINE / ATTACHMENT MODEL (S) : | Serial Numbers | ||
| Included | Excluded | Kit Version | |
| CVGT | See attached listing on Page 7 of this Kit for specific VIN and Serial/Unit numbers
|
N/A | VVK01 |
| CVGTLC | |||
| CVSGT | |||
| LPSDT | |||
| LPSGT | |||
| LPXDT | |||
| MINICOMBO | |||
PURPOSE: INADEQUATE REFLECTORS
The rear and side reflectors do not meet US or Canada Federal Motor Vehicle Safety Standard (FMVSS/CMVSS) governmental regulation 108 for the United States, Canada and Mexico. When towing or parking the vacuum excavator on public roadways, a crash may occur resulting in death or serious injury resulting from a driver(s) of other vehicle(s) not seeing the vacuum excavator at night or during limited sunlight and strike the vacuum excavator. To reduce the potential of this occurring, vehicle additional reflectors may need to be added. Property or equipment damage may also occur.
VVK00-0010 has been created to provide the necessary parts and instructions to add reflectors to the rear and side of the vacuum excavator.
Shutdown Procedure (LP & Air Units)
STOPPING THE MACHINE
For your safety and the safety of others, follow shutdown procedure before working on the machine for any reason, including servicing, maintaining, cleaning, inspecting, unclogging or transporting machine, or as otherwise directed in operator’s manual.
Step 1: Make sure end of vacuum hose is clear of all spoils, debris, and other materials.
Step 2: Turn Water Pump Switch to OFF.
Step 3: Push Throttle Switch to SLOW. Idle engine five minutes to allow vacuum pump to cool down. This helps to prevent the buildup of condensation.
Step 4: Turn Keyswitch to OFF to shut off engine. Remove the key.
Step 5: Pull trigger on any high‐pressure water tool to relieve line pressure.
Step 6: Disassemble all water line connections, vacuum hoses, and tools. Stow properly on machine.
Step 7: Drain CVS Filter Housing / Cyclone.
Shutdown Procedure (CV Units)
STOPPING THE MACHINE
For your safety and the safety of others, follow shutdown procedure before working on the machine for any reason, including servicing, maintaining, cleaning, inspecting, unclogging or transporting machine, or as otherwise directed in operator’s manual.
Step 1: Make sure end of vacuum hose is clear of all spoils, debris, and other materials.
Step 2: Turn Water Pump Switch to OFF.
Step 3: Push Throttle Control left several times to slow engine. Idle engine five minutes to allow vacuum pump (with Reverse Flow Lever – Neutral) to cool down. This helps to prevent the buildup of condensation.
Step 4: Turn Keyswitch to OFF to shut off engine.
Step 5: Pull trigger on any high‐pressure water tool to relieve line pressure.
Step 6: Disassemble all water line connections, vacuum hoses, and tools. Stow properly on machine.
Step 7: Drain Filter Housing / Cyclone.
PROCEDURE 1:
- Inspect the rear fender for the presence of both side-facing and rear-facing reflectors as shown. Units with two red marker lights should have the reflectors placed as shown in Figure A. Units with a single marker light mounted in an angle bracket should have reflectors placed as shown in Figure B.
- If either of the side or rear reflectors are missing, clean the area of the fender where the new reflector will be installed with soap and water and allowed to dry.
- Peel the backing from the reflector(s) and apply the reflector(s) as shown in Figure C for units with two red marker lights. Apply the reflector(s) as shown in Figure D for units with one red marker light mounted in an angled bracket. Ref. 1 Fig. 1.
- Repeat on the opposite side of the trailer.
| FIGURE 1 Parts List | |||
| REF. NO. | PART NO. | DESCRIPTION | VVK01 QTY. |
| 1 | P-5730 | RED REFLECTOR | 4 |
| AFFECTED MACHINES ‐ VVK01‐0010 | ||||||
| MODEL | VIN | SERIAL | MODEL | VIN | SERIAL | |
| CVGT | 5HZC192X0LK002124 | 200145 | LPSDT | 5HZG16214LK002297 | 200302 | |
| CVGT | 5HZC162X0LK002123 | 200286 | LPSDT | 5HZG16216LK002298 | 200303 | |
| CVGT | 5HZC162X4LK002125 | 200309 | LPSDT | 5HZG19216LK002299 | 200310 | |
| CVGT | 5HZC162X8LK002127 | 200326 | LPSDT | 5HZG19219LK002300 | 200311 | |
| CVGT | 5HZC162XXLK002128 | 200327 | LPSDT | 5HZG19210LK002301 | 200312 | |
| CVGT | 5HZC162X1LK002129 | 200328 | LPSDT | 5HZG19212LK002302 | 200313 | |
| CVGT | 5HZC192X6LK002130 | 200377 | LPSDT | 5HZG19214LK002303 | 200314 | |
| CVGTLC | 5HZ0192J2LK000115 | 200356 | LPSDT | 5HZG19213LK002308 | 200315 | |
| CVGTLC | 5HZ0192J2LK000101 | 200357 | LPSDT | 5HZG19215LK002309 | 200316 | |
| CVGTLC | 5HZ0192J4LK000102 | 200358 | LPSDT | 5HZG19211LK002310 | 200317 | |
| CVGTLC | 5HZ0192J6LK000103 | 200359 | LPSDT | 5HZG16210LK002314 | 200340 | |
| CVGTLC | 5HZ0192J8LK000104 | 200360 | LPSDT | 5HZG16218LK002318 | 200342 | |
| CVGTLC | 5HZ0192JXLK000105 | 200361 | LPSDT | 5HZG1621XLK002319 | 200343 | |
| CVGTLC | 5HZ0192J1LK000106 | 200362 | LPSDT | 5HZG16216LK002317 | 200348 | |
| CVGTLC | 5HZ0192J3LK000107 | 200363 | LPSDT | 5HZG1921XLK002323 | 200350 | |
| CVGTLC | 5HZ0192J5LK000108 | 200364 | LPSDT | 5HZG19211LK002324 | 200351 | |
| CVGTLC | 5HZ0192J3LK000110 | 200366 | LPSDT | 5HZG19213LK002325 | 200352 | |
| CVGTLC | 5HZ0192J7LK000112 | 200368 | LPSDT | 5HZG19215LK002326 | 200353 | |
| CVGTLC | 5HZ0192J9LK000113 | 200369 | LPSDT | 5HZG19217LK002327 | 200355 | |
| CVGTLC | 5HZ0192J0LK000114 | 200370 | LPSDT | 5HZG19219LK002328 | 200385 | |
| CVSGT | 5HZD192Y2LK002140 | 200264 | LPSDT | 5HZG19210LK002329 | 200386 | |
| CVSGT | 5HZD162Y6LK002141 | 200265 | LPSDT | 5HZG16214LK002350 | 200387 | |
| CVSGT | 5HZD162Y8LK002142 | 200266 | LPSGT | 5HZH16229LK002051 | 200345 | |
| CVSGT | 5HZD192Y8LK002143 | 200267 | LPXDT | 5HZJ16236LK002146 | 200087 | |
| CVSGT | 5HZD162Y1LK002144 | 200288 | LPXDT | 5HZJ16238LK002147 | 200088 | |
| CVSGT | 5HZD162Y3LK002162 | 200289 | LPXDT | 5HZJ16232LK002144 | 200089 | |
| CVSGT | 5HZD162Y3LK002145 | 200299 | LPXDT | 5HZJ16231LK002149 | 200137 | |
| CVSGT | 5HZD162Y5LK002146 | 200300 | LPXDT | 5HZJ16237LK002169 | 200161 | |
| CVSGT | 5HZD162Y7LK002147 | 200301 | LPXDT | 5HZJ16230LK002160 | 200240 | |
| CVSGT | 5HZD162Y0LK002149 | 200304 | LPXDT | 5HZJ19235LK002172 | 200248 | |
| CVSGT | 5HZD162Y9LK002151 | 200318 | LPXDT | 5HZJ19233LK002171 | 200249 | |
| CVSGT | 5HZD162Y0LK002152 | 200319 | LPXDT | 5HZJ19237LK002173 | 200250 | |
| CVSGT | 5HZD162YXLK002157 | 200329 | LPXDT | 5HZJ19230LK002161 | 200251 | |
| CVSGT | 5HZD162Y1LK002158 | 200330 | LPXDT | 5HZJ19232LK002162 | 200252 | |
| CVSGT | 5HZD162Y3LK002159 | 200331 | LPXDT | 5HZJ19234LK002163 | 200253 | |
| CVSGT | 5HZD192Y8LK002160 | 200332 | LPXDT | 5HZJ16238LK002164 | 200255 | |
| CVSGT | 5HZD192YXLK002161 | 200333 | LPXDT | 5HZJ1623XLK002165 | 200256 | |
| CVSGT | 5HZD192Y3LK002163 | 200341 | LPXDT | 5HZJ16231LK002166 | 200257 | |
| CVSGT | 5HZD162Y7LK002150 | 200349 | LPXDT | 5HZJ16233LK002167 | 200258 | |
| LPSDT | 5HZG16214LK002283 | 200105 | LPXDT | 5HZJ16235LK002168 | 200259 | |
| LPSDT | 5HZG16216LK002284 | 200106 | LPXDT | 5HZJ19230LK002175 | 200290 | |
| LPSDT | 5HZG16218LK002285 | 200107 | LPXDT | 5HZJ16230LK002174 | 200296 | |
| LPSDT | 5HZG16212LK002296 | 200211 | LPXDT | 5HZJ16234LK002176 | 200306 | |
| LPSDT | 5HZG16213LK002307 | 200213 | LPXDT | 5HZJ16236LK002177 | 200307 | |
| LPSDT | 5HZG16219LK002263 | 200223 | LPXDT | 5HZJ16238LK002178 | 200308 | |
| LPSDT | 5HZG16211LK002290 | 200272 | LPXDT | 5HZJ16231LK002183 | 200337 | |
| LPSDT | 5HZG16217LK002262 | 200273 | LPXDT | 5HZJ1623XLK002179 | 200339 | |
| LPSDT | 5HZG16212LK002279 | 200274 | LPXDT | 5HZJ16235LK002185 | 200344 | |
| LPSDT | 5HZG16219LK002280 | 200275 | MINICOMBO | 5HZK19240LK002027 | 200346 | |
| LPSDT | 5HZG16210LK002281 | 200276 | MINICOMBO | 5HZK19244LK002029 | 200395 | |
| LPSDT | 5HZG16212LK002282 | 200277 | ||||
| LPSDT | 5HZG1621XLK002286 | 200278 | ||||
| LPSDT | 5HZG19211LK002291 | 200292 | ||||
7 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| VAC-TRON | CVGT | 2020 |
| VAC-TRON | CVGTLC | 2020 |
| VAC-TRON | CVSGT | 2020 |
| VAC-TRON | LPSDT | 2020 |
| VAC-TRON | LPSGT | 2020 |
| VAC-TRON | LPXDT | 2020 |
| VAC-TRON | MINICOMBO | 2020 |
11 Associated Documents
Miscellaneous Document- Before and After
RMISC-20V368-2643.pdf 615.323KB
Loading...
Reload document 
Open in new tab
Recall Acknowledgement
RCAK-20V368-5897.pdf 245.323KB
Loading...
Non-Compliance 573 Report
RCLRPT-20V368-9908.PDF 218.462KB
Loading...
Recall Quarterly Report #2, 2020-4
RCLQRT-20V368-5596.PDF 211.229KB
Loading...
Recall 573 Report- Amendment 1
RCLRPT-20V368-3771.PDF 218.649KB
Loading...
Recall Quarterly Report #3, 2021-1
RCLQRT-20V368-5262.PDF 211.312KB
Loading...
Remedy Instructions and TSB
RCRIT-20V368-8051.pdf 1124.162KB
Loading...
Safety Bulletin
RCSB-20V368-9558.pdf 414.474KB
Loading...
Recall Quarterly Report #1, 2020-3
RCLQRT-20V368-6218.PDF 211.124KB
Loading...
Recall 573 Report- Amendment 3
RCLRPT-20V368-6094.PDF 218.956KB
Loading...
Recall 573 Report- Amendment 2
RCLRPT-20V368-3134.PDF 218.692KB
Loading...
Latest Recalls Documents
For the Latest and Most Recent Recalls Information Visit the link below…
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V368&docType=RCL
- Snow driveway markers they are highly visible and easy to install,2-way reflector is easily identified from any direction,Can be clearly seen in any weather
- Red Reflective Driveway Marker Each marker features two round reflectors that are sealed in a plastic housing,very reflective
- Fiberglass Rod Driveway Markers,the length of the fiberglass rod can be freely combined, the longest can reach 51 inches, suitable for all kinds of road signs
- Made of durable fiberglass rod with good flexible feature
- Ideal for marking lanes and curbs to clear snow，Space saving use for any purpose to attract attention to a specific area,Identify potential hazards or boundaries with a reflector marker,Adds safety and visibility to hard-to-see areas
- Constructed of break resistant plexiglass
- Includes 2 reflectors per package
- Highly reflective and durable material
- Great for indoor and outdoor use
- Can be used on mailboxes, garbage cans, stakes, houses and much more
- Provides Visibility: in the dark, the bright reflector has a clear reflection when light lays it on, which is a helpful accessory for trailers, trucks, campers, cargo carts and other vehicles
- Easy to Mount: a central mounting hole is on the safety reflectors (screws are not included), ensuring a solid installation and easy to disassemble when it is needed
- Waterproof Material: the highly reflective and reliable plastic material is adopted, featuring waterproof and good sealing, and preventing water drips from penetrating inside so that it has a lasting period for using
- Safety Reflector: reflectors have a wide application in daily life, including vehicles, mailboxes, trash cans, posts, wooden piles, houses, walls, gates and so on, giving a cue signal so that it provides safety for the driver at night; The reflected light is uniform and not dazzling
- Adequate Quantity: you will receive 10 driveways reflectors, sufficient quantity to meet your daily needs, you can also share with family members and friends to use
- Material: made of ABS plastics material, wear-resistant, waterproof and long service life.
- Visible reflection: hexagonal honeycomb design, three-dimensional reflection, more angle illumination, more obvious at night, improve vehicle recognition, and keep a safe distance from other vehicles at night.
- Easy to install: There is an installation hole in the center of the reflector for screw installation (excluding screws), which can be installed on any plane quickly and easily.
- Application:You can install it on your fence, gate, mailbox, post, trailer, truck, camper, van and other vehicles, wherever you need safety warning.
- Packaging includes:10 x Red Reflector.
- Includes (2) red rectangular reflectors
- Permanent mount adhesive back, no tools required for installation
- Optional mounting holes (screws sold separately)
- DOT compliant
- Each reflector measures 3-1/8" W x 1-3/8" H
- [Highly visible]: The top of the driveway markers has a 4-inch diameter double-sided reflector and an 8-inch reflective tape wrapped around the post body, making it easy to see from any direction when the headlights are on. Guide you to enter and exit the garage more safely. In winter, driveway reflectors can prevent your yard from being damaged by Snowplow.
- [Easy to Install]: 10PCS 48 "x 1/4" fiberglass driveway reflectors are smooth and burr free, with a tapered end and a pointed bottom design, making the pile easy to install. The snow stakes pole adopts a three section design, which is more convenient for storage and carrying.
- [High quality]: driveway pile made of glass fiber through pultrusion process. The driveway reflectors on poles is light in weight, but high in strength and toughness, and can be used in ambient temperatures of - 22 to 140 degrees Fahrenheit.
- [Flexibility]: The snow stakes driveway markers has high tensile resistance and is not easy to break. It always recovers quickly after bending without causing any damage.
- [Timely service]: if you have any questions about reflective driveway markers, please contact us and we will deal with it for you within 24 hours.
- 🪞【What You Get】：You will get 45pcs Round Front Reflector Tool Set. This package contains 15pcs round reflectors, a total of 3 colors --white, red and yellow, 5 pieces of each color, along with 30pcs mounting nuts and bolts, sufficient quantities can meet your use and replacement needs. And the outstanding colors can make it clearly.
- 🪞【Premium Quality】：Made of highly reflective and reliable plastic material, they are waterproof and anti-aging, good sealing, prevent water drops from penetrating inside, has long service life, more cost-effective. Fine workmanship, bright and eye-catching, good reflective effect, increased visibility in the dark environment and driving safety.
- 🪞【Easy Installation】: First drill a hole on the surface of the object to be installed, then insert the bolt into the center of the reflector and fix it with a nut. It can be quickly and easily installed on any flat surface and is easy to remove. Keep the wall dry and clean before installation, peel off the adhesive backing protection film and stick the reflector in place.
- 🪞【Various Colors】：There are three colors for you to choose, white, red and yellow, 5 of each color, with diameter of 80mm-3inch , the bright color can quickly attract attention. When there is light in the dark environment, the reflector will produce a clear reflection, reflecting light evenly, not blinding, to provide safety and security for night driving.
- 🪞【Wide Application】: Reflectors have a wide range of applications in daily life for trailers, trucks and other vehicles, as well as boats, mailboxes, stakes, houses, walls, gates, bicycles, motorcycles, etc. They are suitable for indoor and outdoor use, helping you see your driveway more clearly at night or in any weather, adding visibility and safety to night driving.
- Waterproof and Serviceable: each circle reflector is made of quality plastic, waterproof, reliable and sturdy, not easy to deform or break, and can be kept for a long time; The surface of the reflector is smooth and comfortable to touch, easy for you to use
- Proper Dimension to Apply: the size of these road reflectors is about 8 cm/ 3 inches in diameter, appropriate and convenient for you to use, without taking up too much space, bringing you more convenience
- Adequate to Meet Your Needs: you will receive 20 pieces of trailer reflectors with 20 pieces of screws; The combination is considerable for you to apply and replace, and can easily meet your daily use and other requirements
- Easy to Operate: our safety reflectors are designed with holes on the middle part, you can easily and effectively install them with the matched screws, and easy to disassemble, saving time and effort
- Assorted Occasions to Apply: these gate reflectors are suitable for diverse kinds of vehicles, including but not limited to trailers, trucks, campers, bicycles, cars, towing, RVs, buses and other vehicles
- Product Size(L x W x T): 150 x 50 x 8.5 mm/5.9 x 1.96 x 0.33 inch ; Screw Hole Size：6mm/0.23inch
- Materials: ABS+PMMA，Installation: 3M Adhesive Or Screw Mount
- Package includes:6pcs Yellow Reflectors + 6pcs Red Reflectors ( Sticker-on Installation Or Screw Mount Hole)-Not equipped with screws
- High-strength paste, durable, anti-UV, high temperature, not afraid of rain
- Replace the screws with 3M paste to make the appearance more beautiful, one year warranty
- Double Sided Reflectors: 48 inch driveway markers with double sided reflectors has good reflection effect, you can clearly see the driveway and lawn edge at dark night and in snowy day
- Easy to Install: each snow plow consist of 3 parts, just connect all joints together. If you put it into soft soil, just push it. If you want to put it in hard and frozen soil, please drill holes with a drilling tool, and it easy to remove
- Sturdy & Strong Material: with double sided lens, and metal structure post, the driveway reflectors much sturdier and stronger than fiberglass driveway markers, it will keep stable in extreme weather, and it will last for years
- Wide Application: reflective snow stakes for road, snow plowing, driveway, sidewalk, lawn edge, yard sign, parking area, and landscaping, great garden snow stake with easy visibility
Last update on 2024-04-11 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.