June 12, 2020 NHTSA CAMPAIGN NUMBER: 20V350000
ABS Magnetic Sensor Ring May Wear Prematurely
Without ABS, controlling the scooter in an emergency stopping scenario may be affected, increasing risk of a crash.
NHTSA Campaign Number: 20V350
Manufacturer KYMCO USA
Components SERVICE BRAKES, HYDRAULIC
Potential Number of Units Affected 1,786
Summary
KYMCO USA (KYMCO) is recalling certain 2018-2019 Like 150i scooters. Excessive grease applied to the ABS sensor magnetic ring may cause the deterioration of the magnetic ring, resulting in ABS failure.
Remedy
KYMCO will notify owners, and dealers will clean the speed sensor sleeve and replace the magnetic ring in the speed sensor, free of charge. The manufacturer has not provided a notification schedule for this recall. Owners may contact KYMCO customer service at 1-888-235-3417. KYMCO's recall number for this recall is Like150-2020-Recall.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
2 Affected Products
Vehicle
MAKE | MODEL | YEAR |
KYMCO | LIKE 150I | 2018-2019 |
2 Associated Documents
Defect Notice 573 Report
RCLRPT-20V350-6935.PDF 216.856KB
Recall Acknowledgement
RCAK-20V350-7260.pdf 307.377KB
Latest Recalls Documents
https://www-odi.nhtsa.dot.gov/acms/cs/documentList.xhtml?docId=20V350&docType=RCL
For the most up to date documents from NHTSA for this Recall, click the lick above
- 4Pin OBD2 Scan Cable for Yamaha - Diagnostic 4 Pin to OBD2 OBDII Cable Harness Adapter for Yamaha. Work with all latest motorcycle model with the 4-pin diagnostic plug, like FJR 1300, FZ09, FZ10, MT09, FZ-10, MT-10, XSR900, R6, R1, and XSR 900, XT1200ZE etc. Work on all newer Yamaha's that require the 4 pin adapter!
- 4Pin OBD2 Scan Cable Cooperation - This 4pin motorbike OBD cable works with various programs / apps and even with standard OBD2 readers.
- 4pin OBD2 Scan Cable Support----Work with all latest motorcycle model with the 4-pin diagnostic plug, like FJR 1300, FZ09, FZ10, MT09, FZ-10, MT-10, XSR900, R6, R1, and XSR 900, XT1200ZE etc.
- After connect this 4pin motorcycle cable to programs / apps, then you can read / delete the fault memory,Reading of live engine data such as speed, rpm, temp, O2 sensor data, emissions, voltages, etc.
- High quality warranty.
- BMW 10-pin OBD adapter for motorcycles- Allows K-line and DCAN diagnostics.the 10pin cable Suitable with GS-911,OBDLink,Motorscan...
- Motor 10pin cable Allows K-line and DCAN diagnostics software - ISTA/D ISTA/P Rheingold
- 10pin Motor cable Designed to work with just a laptop and regular K-line and/or DCAN interface
- Motor 10pin cable Supports diagnostic software: ISTA/D ISTA/P Rheingold
- BMW 10-pin OBD adapter for motorcycles and 5 years warranty
- ✔✔✔ Compatible: The motorcycle scanner uses a 2.4-inch color display, which is easy to operate and easy to carry. It is an ideal tool for motorcycle after-sales maintenance and supports a variety of models. It is suitable for Honda, Suzuki, Yamaha, and also supports engine system functions, bringing you more convenience.
- ✔✔✔ Data reading: You can read the code and display the detailed description of the diagnostic trouble code (DTC). You can erase and reset the code, turn off the check engine light (MIL), clear the code and reset the monitor. It can read and display real-time ECU/PCM data stream, draw functions graphically and store freeze frame data.
- ✔✔✔LCD display: read real-time data stream, and display the continuous data stream information of the vehicle in real-time graph (waveform) display mode. View freeze frame data and check certain vehicle conditions recorded by the onboard computer when emissions-related failures occur.
- ✔✔✔Easy to carry: small size and light weight, with storage box for easy carrying and operation. It is a must-have item for motorcycle repair, find and troubleshoot faults.
- ✔✔✔Service: We are responsible for the product and believe in the quality of the product. Professional functions and high reliability bring you a different experience and ensure the satisfaction of each customer. If you have any questions about our products, we will answer them at any time.
- Read and Clear Fault Codes -- Reset Service Reminders
- Control Unit Information -- View Sensor Values Log & Graph Live Values
- Component Function Test -- Component Calibration Adaption Reset and Relearn
- Basic Coding Bleed Tests And much more…
- Now for iPhone & iPad!
- Wide range of applications: High-quality motorcycle EFI system diagnostic instrument can meet the detection and diagnosis of multiple motorcycle EFI systems. It is indeed an ideal tool for aftermarket maintenance of motorcycles.
- Large capacity: Scanner tool which adopts a 32-bit processor and a 3.2-inch color screen supports large capacity memory. The product features in easy operation, good touch feeling, and long durability.
- Strong practicability, multiple functions: Read information system, read data stream, freeze data, read fault code, erase fault codes, CO idle speed adjustment, actuators test, trouble shooting guidance, etc.
- Functions: 1. Read information system (read ECU version information); 2. Read data stream (read the parameter values ??of various ECU sensors); 3. Freeze data (lock dynamic data for easy viewing); 4. Read fault code (read fault code stored by ECU and conduct analysis); 5. Erase fault code (clear fault code stored by ECU); 6. CO idle speed adjustment; 7. Actuators test; 8. Trouble shooting guidance, etc.
- Check While Using: 1) Check if the ignition switch is on or if the engine is running; 2) Check if the power light of the host is on (red light), and if the signal light is flickering when detecting the system; 3) Check if the diagnostic cable and the diagnostic base are in poor contact or short circuit; 4) Check if the version of the software is suitable for the vehicle type.
- 4Pin OBD2 Scan Cable for Yamaha - Diagnostic 4 Pin to OBD2 OBDII Cable Harness Adapter for Yamaha. Work with all latest motorcycle model with the 4-pin diagnostic plug, like FJR 1300, FZ09, FZ10, MT09, FZ-10, MT-10, XSR900, R6, R1, and XSR 900, XT1200ZE etc.
- Diagnostic Test Scanner Function - OBD2 4 Pin diagnostic plug adaptor cable clear a check engine light, after connect this 4pin motorcycle cable to programs / apps, then you can read / delete the fault memory,Reading of live engine data such as speed, rpm, temp, O2 sensor data, emissions, voltages, scanner cable for best test results.
- 4Pin OBD2 Scan Cable Cooperation - This 4pin motorbike OBD cable works with various programs / apps and even with standard OBD2 readers.
- Premium Quality - 4Pin OBD2 diagnostic USB cable made of premium material, this car diagnostic cable obd2 scanner is sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage
- What You Will Get - We offer OBDII cable 24 month service, any questions about OBDII cable converter adaptor, please contact us by email, we will reply you within 24 hours.You will get a obd2 connector cable scan tool
- Works flawlessly with all BMW motorcycles from year 1996 to 2016.
- Softwares: ISPI-NEXT Admin Tools, ISPI Admin Client, ISTA-D (Rheingold), ISTA-P (ISSS-NEXT), HDD-Update, KSD, ETK, E-SYS, WINKFP, NCS-Expert tool, INPA Tool32, BMW Coding Tool, NcsDummy, IToolRadar, EasyConnect, MotoScan App.
- Compatible with K-Line and DCAN tools
- GS-911 Alternative / Replacement: Pair it with OBDLink, Motorscan, BMW ICOM A1, BMW ICOM A2, BMW ICOM A3
- Professional manufacturing, stable characteristic and high reliability.
- ❶【BATTERY TESTER】Designed for 12V/24V batteries with a capacity of 100 to 2000 CCA, such as regular flooded, AGM flat plate, AGM spiral, GEL and deep cycle batteries, 12V & 24V starting and charging system. The test results based on CCA、SAE、IEC、EN、DIN、JIS and others Standards
- ❷【BATTERY DIAGNOSTIC DOCTOR】Applied with the latest conductivity method to measure, quickly analyze the internal conditions of the battery, including health status, charging status, battery starting current, internal resistance and test conclusions
- ❸【CRANKING AND CHARGING SYSTEM TEST】KS20pro battery tester displays the test result on the starter system, cranking voltage, and cranking time in milliseconds. Also, the battery diagnostic tool can check 12V or 24V charging system to make sure the output voltage of the generator is in a regular condition, the rectifier diode works fine and the charging current is a normal status
- ❹【WIDE APPLICATIONS】Ideal for cars, heavy-duty trucks, RVs, motorbikes, boats, ATVs and even lawn tractors batteries, even support both in and out of vehicle test. That allows you to test a battery according to its location
- ❺【EASY & SAFE OPERATION】Strong and lightweight construction, well-arranged keypad, and menu-driven operation make this battery analyzer easier to operate. what's more, it don't need to connect to a large load discharge test, no damage to the battery. Keeps operation safe for all levels of users , good choose for everyone
Last update on 2021-03-03 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2021-03-03 / Affiliate links / Images from Amazon Product Advertising API