“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10089268
Manufacturer Communication Number: SMB164
Summary
SERVICE MANUAL BULLETIN FOR DOOR SYSTEMS SENSITIVE EDGES, DESCRIBING THE ROUTING REQUIREMENTS OF THE FLEXIBLE CONDUIT USED BETWEEN THE DOOR PANEL AND THE DOOR BASEPLATE PRESSURE SWITCH.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
NEW FLYER | NEW FLYER | 9999 |
SMB-164
ISSUE DATE: Dec 13 2016
Sensitive Edges – Flexible Conduit Installation
16 – ENTRANCE & EXIT DOORS
This bulletin provides information on the procedure describing the routing requirements of the flexible conduit used between the door panel and baseplate.
This information supersedes any prior information on this subject already provided in your New Flyer Service Manuals. Make this Service Bulletin available to service personnel to inform them of changed information.
SEOCONTENT-START
SMB-164 1 of 3
SERVICE MANUAL BULLETIN
This Service Manual Bulletin is prepared by the Publications Department of New Flyer Industries
Canada ULC. Refer to details below.
The New Flyer vehicles described in this manual may be protected by one or more
patents and design applications or registrations in the United States and Canada,
and in other countries. Refer to “Vehicle Patent Information” in this manual.
Copyright © 2016 New Flyer Industries Canada ULC
ISSUE DATE: Dec 13 2016
SMB-164
APPLICABILITY
VEHICLE LENGTH 30ft. 35ft. 40ft. 60ft. ALL
VEHICLE TYPE
Xcelsior® MiDi® Invero®
ALL
Low Floor High Floor
FUEL TYPE
Diesel Diesel/Electric CNG LNG
ALL
Fuel Cell Trolley/Electric Battery/Electric
SUBJECT Sensitive Edges – Flexible Conduit Installation
SECTION TITLE 16 – ENTRANCE & EXIT DOORS
DETAILS This bulletin provides information on the procedure describing the routing
requirements of the flexible conduit used between the door panel and
baseplate.
This information supersedes any prior information on this subject
already provided in your New Flyer Service Manuals. Make this Service
Bulletin available to service personnel to inform them of changed information.
2 of 3 SMB-164
SERVICE MANUAL BULLETIN
SMB-164
The New Flyer vehicles described in this manual may be protected by one or more
patents and design applications or registrations in the United States and Canada,
and in other countries. Refer to “Vehicle Patent Information” in this manual.
Copyright © 2016 New Flyer Industries Canada ULC
1. FLEXIBLE CONDUIT
1.1. Installation
The following procedure describes the
routing requirements of the flexible conduit
used between the door panel and baseplate.
The sensitive edge PVC tubing and
CLASS sensor wiring (if equipped) are
routed from leading edge of each door
panel, upward through the hollow shaft of
the roller bracket, and inward along the
baseplate. The PVC tubes terminate at
their respective pressure wave switch and
the CLASS sensor wiring (if equipped) terminates
at the CLASS controller, located
above the baseplate. The PVC tube and
wiring harness are protected with a spiral
wrapped loom.
Inspect the flexible conduit for proper
installation and routing as follows:
1. Close the door panels and feed the flexible
conduit from each door panel upward
through the shaft of their respective roller
bracket, being careful not to pinch or otherwise
damage the conduit.
2. Locate the P-clamp on the baseplate and
insert a short piece of foam tape inside the
P-clamp. Refer to your New Flyer Parts
Manual for part number of foam tape.
3. Route the flexible conduit on the forward
door panel through the P-clamp. Position
the P-clamp perpendicular to the baseplate
door channel and torque the clamp to
13 in-lbs.
Route the flexible conduit on the aft door
panel through the P-clamp. Position the
P-clamp at approximately 30° to the baseplate
door channel and torque the clamp to
13 in-lbs. See “Fig. 1: Flexible Conduit
Routing” on page 3.
Nylon tywraps must be applied over the
spiral wrap and not directly on the tubing
or wiring harness itself. DO NOT
over-tighten the nylon tywrap as this
could constrict the sensitive edge tubing
and prevent proper operation of the
sensitive edge system.
SMB-164 3 of 3
SERVICE MANUAL BULLETIN
SMB-164
The New Flyer vehicles described in this manual may be protected by one or more
patents and design applications or registrations in the United States and Canada,
and in other countries. Refer to “Vehicle Patent Information” in this manual.
Copyright © 2016 New Flyer Industries Canada ULC
4. Carefully route the remaining cable assembly
to next closest and convenient tywrap
mounting clip on the baseplate. Route the
cable assembly to avoid potential contact
with moving parts or sharp edges. Secure
conduit to mounting clips with nylon
tywraps.
5. Connect the sensitive edge tubing from
each door panel to its respective pressure
wave switch.
6. Connect the CLASS sensor wiring (if
equipped) from each door panel to their
respective connectors on the CLASS controller.
7. Manually operate both door panels and
observe the movement of the flexible conduit
as the doors open and close. Verify
that the conduit does not kink or snag at
any point throughout their range of travel.
Light cable contact with the baseplate or
vehicle structure at the extreme ends of
travel is acceptable. If necessary, adjust
the orientation of the conduit and P-clamps
to ensure these requirements are met.
8. Upon completion of flexible conduit installation:
a. Test the function of the sensitive edge
system. Refer to Section 16 in your
New Flyer Service Manual for test procedure.
b. Test the function of the CLASS system
(if equipped). Refer to Section 16 in
your New Flyer Service Manual for test
procedure.
Fig. 1: Flexible Conduit Routing
????????????
????????????
s034805a.
SMB164
https://www.nhtsa.gov/recalls?nhtsaId=10089268
https://static.nhtsa.gov/odi/tsbs/2016/MC-10089268-6903.pdf
“This site contains affiliate links for which OEMDTC may be compensated” |
- 【PREMIUM Liquid-Tight Conduit】- Length :25',ID:3/4inch,OD:1inch,Thick: 2.5 mm The Flexible Non Metallic Liquid Tight Electrical Conduit kit is constructed with Resists corrosion PVC to ensure quality and service life.
- 【Complete Accessories】-3/4-Inch 25Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings
- 【Safety and Sturdiness】-Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments; resists abuse, pull and crushing; outdoor, sunlight resistant, direct burial,50% lighter than metallic conduits
- 【Effortless Installation】-The Liquid-Tight Conduit Fits is fast, and only one person can complete the work in a few minutes. flexible conduit connector is safe to use and does not require any tools. you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule
- 【Wide Application】-HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lightin
- 【Premium Liquid-Tight Conduit】1/2 flexible electrical conduit made from anti-oxidation virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs.Integral rigid & flexible PVC construction will not damage conductors,and 50% lighter than metallic conduits.Costs less to install.
- 【Safety and Sturdiness】Ansgery 1/2 liquid tight conduit resists to corrosion, water, oil, abrasion, acid, metal shavings and rough environment; Resistance to pulling and crushing; Fully adaptable to outdoor environments such as direct sunlight, direct burial.Stays flexible in extreme hot and cold temperatures.
- 【Complete Accessories】1/2 Inch 25 Ft Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.Flexible Electrical Conduit Length:25FT,ID:1/2inch,OD:0.83inch,Thick:2.5 mm,Fittings install directly onto conduit for waterproof joints.
- 【Effortless Installation】Liquid-Tight Conduit Fits is fast,length can be cut to size,only one person can complete the work in a few minutes.flexible conduit connector is safe to use and does not require any tools.You can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule.
- 【Wide Applications】PVC electrical conduit has very good durable, pulling and squeezing;Widely used in HVAC equipment, machine tools,marine equipment,motors and controls,printing equipment,pumps, refrigeration equipment,transformer connections,outdoor lighting.
- 【Premium Liquid-Tight Conduit】 The liquid conduits are made of premium pvc material, the flexible non metallic features strong ability of protection same as metal conduit, and more flexible and light.
- 【Safety and Sturdiness】 Our electrical conduits is resistance to corrosion, wear, oil, water, acid, metal chips and rough environment; Resistance to pulling and crushing; Outdoor, sun resistant, directly buried, 50% lighter than metal conduit.
- 【Easy Installation】 Only one person can finish the work in a few minutes. Flexible conduit connectors are safe to use and do not require any tools. The dome seal nut can be tightened by simply pushing the conduit or pipe onto the ferrule.
- 【Flexibility】 Non metalic conduit can be used in very tight Spaces, light weight - lower installation cost.
- 【Wide Application】 PVC electrical conduit can be used for AC equipment, machine tools, Marine equipment, motor and control, printing equipment, pump, refrigeration equipment, transformer connection, outdoor lighting.
- 25-foot 1/2-Inch high strength aluminum alloy construction provides mechanical protection for conductors and cable
- For use with listed connectors intended for NEC Type FMC (Flexible Metal Conduit)
- Cuts 80-Percent faster than steel and is 66-Percent lighter than steel
- Smooth interior for easy wire pulling
- Superior corrosion resistance and built in flexibility for simplified positioning
- 3/4inch Liquid Tight Conduit: Length 25 Ft, It’s often used to route power, control, and communications cable in demanding applications, such as around ovens, in foundries, and in refrigeration equipment. Also used in heat pumps; swimming pools; spas; outdoor lighting; motors and controllers; solar panels.
- 3/4inch Liquid Tight Conduit: Length 25', OD:1.03 inch, Thick: 3 mm, It’s often used to route power, control, and communications cable in demanding applications, such as around ovens, in foundries, and in refrigeration equipment. Also used in heat pumps; swimming pools; spas; outdoor lighting; motors and controllers; solar panels.
- High-Quality Conduit Material: Electrical Conduit Made from high-quality Resists corrosion virgin PVC. No sharp edges or burrs will form on the conduit surface after cropping, and will not damage the conductor to ensure service life.
- Easy Installation: These hoses are equipped with 4 Straight and 3 Angle Fittings Included. even one person can install it easily, Just cut the hose, no other tools are required.
- Application: It’s flexible to fit around curves or tight spaces. A metal conduit is stronger than a plastic conduit to protect wire and cable from crushing and impact damage. machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, and outdoor lighting.
- 【PREMIUM Liquid-Tight Conduit】- Made from high quality virgin PVC. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. Light weight and lower installed cost. Quick installation, cuts with utility knife or PVC cutter. Integral rigid & flexible PVC construction
- 【Safety and Sturdiness】-Flex conduit 3/4 Resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments; resists abuse, pull and crushing; outdoor, sunlight resistant, direct burial,50% lighter than metallic conduits
- 【Effortless Installation】-The liquid tight conduit 3/4 Fits is fast, and only one person can complete the work in a few minutes. flexible conduit 3/4 connector is safe to use and does not require any tools. you can simply tighten the dome sealing nut by pushing the conduit or pipe onto the ferrule
- 【Wide Application】 HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting
- 【Complete Accessories】-3/4-Inch 50 Foot Flexible Electrical Conduit with 5 Straight and 3 90-Degree Conduit Connector Fittings.Flexible Electrical Conduit Length: 50’,ID:3/4inch,OD:1inch,Thick: 2.5 mm UL Listed Underwriter's Laboratories File No. E529256
- ❤Application❤---This Non-Metallic PVC Electrical Conduit is perfect for using in multiple applications for electrical, telephone, cable, HVAC, Refrigeration, landscape lighting and more. This product features a strong yet flexible covering that is smooth inside for easy wire pulling.
- ❤Safety and Durability❤---Made from premium materials for safety and durability. Resists corrosion, abrasion, oil, water, acid, metal shavings and rough environments.
- ❤Size❤---Length: 50 feet,Inner Diameter: 0.63 inch,Outer Diameter: 0.83 inch. For 1/2 inch connectors.
- ❤Package❤---1/2 inch 50 feet flexible electrical conduit with 5 pcs straight coulpings, 3 pcs 90-degree elbows and 10 pcs conduit straps.
- ❤Warranty❤---1 year warranty. Easy to intall and not require any tools. The product quality is the same as that of local supermarkets.
- 【High Quality Materials】Electrical conduit is constructed with Resists corrosion PVC to ensure quality and service life. Smooth inside for easier wire pulling, no hazardous sharp edges or burrs, will not damage conductors. It is lightweight and flexible, but it won’t collapse, crimp or leak around curves. It has a rigid PVC spiral which provides strength which is surrounded by a flexible PVC jacket for flexibility and water-resistance.
- 【Flexible Conduit Features】Electrical conduit flexible is made of high-quality materials, it is resists corrosion, abrasion, oil, water, acid, metal shavings, and rough environments; resists abuse, pull and crushing; sunlight resistant; 50% lighter than metallic conduits connector.outdoor electrical conduit is reusable, light weight and lower installed cost.
- 【Easy to Install and Cut】No disassembly is required, simplifying the installation of wires.The installer Only needs to push the conduit or pipe onto the ferrule to tighten the dome sealing nut;Easy to cut to the length you need with a utility knife or PVC cutter
- 【Multi-purpose】Flexible electrical conduit is suitable for indoor or outdoor use and direct burial applications.Mainly used in HVAC Equipment, machine tools, marine equipment, motors and controls, printing equipment, pumps, refrigeration equipment, transformer connections, outdoor lighting
- 【Package Include】You will receive 3/4 inch 25 feet electrical conduit pipe with 6 straight and 3 90 degree conduit connector fittings. We attach great importance to the shopping experience of each customer. If you encounter problems during use, please feel free to contact us, we will try our best to solve it for you.
- 【Premium Liquid-Tight Conduit】 The liquid conduits are made of premium pvc material with UL certification, the flexible non metallic features strong ability of protection same as metal conduit, and more flexible and light.
- 【Safety and Sturdiness】 Our electrical conduits is resistance to corrosion, wear, oil, water, acid, metal chips and rough environment; Resistance to pulling and crushing; Outdoor, sun resistant, directly buried, 50% lighter than metal conduit.
- 【Easy Installation】 Only one person can finish the work in a few minutes. Flexible conduit connectors are safe to use and do not require any tools. The dome seal nut can be tightened by simply pushing the conduit or pipe onto the ferrule.
- 【Flexibility】 Non metalic conduit can be used in very tight Spaces, light weight - lower installation cost.
- 【Wide Application】 PVC electrical conduit can be used for AC equipment, machine tools, Marine equipment, motor and control, printing equipment, pump, refrigeration equipment, transformer connection, outdoor lighting.
- Split loom Size: Inner diameter: 1/4"| Length: 30 Feet | Color: Black. Our split loom is split and easy to put wires in.
- High Quality: Our wire loom is made of 100% new and high-quality polyethylene. Wire protector tubing operating temp (degree F.):-94 to 257; Can be used to protect electrical wiring in industries, automotive engine compartment wiring, home, and office.
- Protect Your Wires: Resistant to abrasion, corrosion, oil, and other harmful chemicals. Install our cord cover will prevent cable wear and prevent pets from chewing on the wires. The split loom tubing is perfect for indoor or outdoor wire cover.
- Wide Application: Idea to organize and protect power cords, entertainment system wiring, ethernet cables, wire harnesses, small hoses, and cable conduit.
- Easy To Installation: Cut the length of the pipe to the size you want, then find the slit and put the wire in.Great plastic cover for electrical wires and cables.
Last update on 2024-04-23 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.